Metal-organic frameworks-derived carbon modified wood carbon monoliths as three-dimensional self-supported electrodes with boosted electrochemical energy storage performance

Surface-modified composites of metal-organic framework and wood-derived carbon for high-performance supercapacitors

The renewable nature, high carbon content, and unique hierarchical structure of wood-derived carbon make it an optimal self-supporting electrode for energy storage. However, the limitations in specific surface area and electrical conductivity defects pose challenges to achieving satisfactory charge storage in wood-derived carbon electrodes. Therefore, exploring diverse and effective surface strategies is crucial for enhancing the electrochemical energy storage performance. Herein, a decoration technique for enhancing aesthetic appeal involves applying a metal-organic framework (Ni/Co-MOF) containing nickel and cobalt onto the inner walls of wood tracheids. The sequential modification steps include carbonization, oxidation activation, and acid-etching. The Ni/NiO/CoO-CW-4 electrode, made by acid-etching carbonized wood (CW) doped with nickel, nickel oxide, and cobalt oxide for 4 h, has excellent surface area and pore size distribution, high graphitization degree, and exceptional conductivity. Furthermore, surface modification optimizes the surface chemistry and phase composition, resulting in a 0.8 mm thick Ni/NiO/CoO-CW-4 electrode with an exceptionally high areal capacitance of 16.76 F cm-2 at 5 mA cm-2. Meanwhile, the fabricated solid-state supercapacitor achieves an impressive energy density of 0.67 mWh cm-2 (8.38 mWh cm-3) at 2.5 mW cm-2 (31.25 mW cm-3), surpassing representative modified wood-based carbon electrodes by approximately 2-7 times. Additionally, the supercapacitor demonstrates exceptional stability, maintaining 96.21 % of capacitance even over 10,000 cycles. The parameters presented here demonstrate a significant improvement compared to those typically observed in most modified wood-derived carbon-based supercapacitors, effectively addressing common issues of low energy density and suboptimal cycling performance with wood carbon composites.

Self-supported porous wood carbon electrode with a MoC/carbon nanocage composite for application in a high-performance supercapacitor

The rational design and synthesis of carbon nanocages with highly complex porous structures are continuously facing challenges in the development of high-performance supercapacitors (SCs). The electrochemical performance characteristics of electrodes rely on their compositions and fabrication methods. Here, we propose a universal and efficient approach for the in-situ synthesis of zeolitic imidazolate framework-8 (ZIF-8) on porous carbonized wood, where the selective utilization of hexacarbonyl molybdenum protects the structural integrity of the ZIF-8 precursor, preventing collapse during thermal treatment. The subsequent pyrolysis process leads to the formation of small-sized molybdenum carbide (MoC) which are embedded in carbon nanocages (CN). The composite electrode consists of MoC/CN embedded in a porous carbonized wood (PCW), and it shows area-specific capacity of 9.7F cm-2 and 9.4 F cm-2 at 5 mA cm-2 and 30 mA cm-2, respectively. Subsequently, the symmetric supercapacitor, with two MoC/CN@PCW electrodes exhibits a areal specific capacitance of 2.7 F cm-2 at 5 mA cm-2. Moreover, this supercapacitor maintains an capacitance retention rate of 98.5 % after 12,000 discharge cycles. The supercapacitor exhibits a power density of 6.5 mW cm-2, resulting in an energy density of 0.864 mWh cm-2. Therefore, the utilization of wood-based electrodes holds promise for energy storage systems.

One stone for four birds: A "chemical blowing" strategy to synthesis wood-derived carbon monoliths for high-mass loading capacitive energy storage in low temperature

Biomass-derived carbon materials are promising electrode materials for capacitive energy storage. Herein, inspired by the hierarchical structure of natural wood, carbon monoliths built up by interconnected porous carbon nanosheets with enriched vertical channels were obtained via zinc nitrate (Zn(NO3)2)-assisted synthesis and served as thick electrodes for capacitive energy storage. Zn(NO3)2 is proved to function as expansion agent, activator, dopant, and precursor of the template. The dense and micron-scale thickness walls of wood were expanded by Zn(NO3)2 into porous and interconnected nanosheets. The pore volume and specific surface area were increased by more than 430 %. The initial specific capacitance and rate performance of the optimized carbon monolith was approximately three times that of the pristine dense carbon framework. The assembled symmetric supercapacitor possessed a high initial specific capacitance of 4564 mF cm-2 (0-1.7 V) at -40 °C. Impressively, the robust device could be cycled more than 100,000 times with little capacitance attenuation. The assembled zinc-ion hybrid capacitor (0.2-2 V) delivered a large specific capacitance of 4500 mF cm-2 at -40 °C, approximately 74 % of its specific capacitance at 25 °C. Our research paves a new avenue to design thick carbon electrodes with high capacitive performance by multifunctional Zn(NO3)2 for low-temperature applications.

Regenerated silk protein based hybrid film electrode with large area specific capacitance, high flexibility and light weight towards high-performance wearable energy storage

Planar wearable supercapacitors (PWSCs) have sparked intense interest owing to their hopeful application in smart electronics. However, current PWSCs suffered from poor electrochemical property, weak flexibility and/or large weight. To relieve these defects, in this study, we fabricated a high-performance PWSC using silk protein derived film electrodes (PPy/RSF/MWCNTs-2; RSF, PPy and MWCNTs represent regenerated silk film, polypyrrole and multi-walled carbon nanotubes, respectively, while 2 is the mass ratio of silk to MWCNTs), which were developed by 'dissolving-mixing-evaporating' and in situ polymerization. In three-electrode, PPy/RSF/MWCNTs-2 showed a superb area specific capacitance of 8704.7 mF cm-2 at 5 mA cm-2, which surpassed numerous reported PWSC electrodes, and had a decent durability with a capacitance retention of 90.7 % after 5000 cycles. The PPy/RSF/MWCNTs-2 derived PWSC showed a largest energy density of 281.3 μWh cm-2 at 1660.1 μW cm-2, and a power density as high as 13636.4 μW cm-2 at 125.6 μWh cm-2. Furthermore, impressive capacitive-mechanical stability with a capacitance retention of 92 % under bending angles from 0 to 150 was depicted. Thanks to the rational and affordable preparation, our study for the first time prepared RSF electrode that had great capacitive property, high mechanical flexibility and light weight, simultaneously. The encouraging results can not only open up a new path to manufacture high-performance flexible electrodes, but may also help to realize the high-value-added utilization of silk.

Green synthesis of metal-organic framework loaded dexamethasone on wood aerogels for enhanced cranial bone regeneration

Bone defects have attracted increasing attention in clinical settings. To date, there have been no effective methods to repair defective bones. Balsa wood aerogels are considered as an excellent source of chemicals for chemical modification to facilitate the in situ immobilization of zeolitic imidazolate framework-8. Furthermore, dexamethasone has received considerable attention for bone tissue engineering. In this study, for the first time, a simple but effective one-pot method for developing a novel zeolitic imidazolate framework-8 with different concentrations of dexamethasone was developed. These findings illustrate that the novel scaffold has a significant positive impact on osteogenic differentiation in vitro and repairs defects in vivo, suggesting that it can be used in bone tissue engineering.

Poly (Ionic Liquid)-Metal Organic Framework-Derived Nanoporous Carbon Membranes: Facile Fabrication and Ultrahigh Areal Capacitance

With the rapid development of energy storage technology, the operation of portable and wearable devices is inseparable from high energy density power supplies. However, the demand for high performance supercapacitors in movable smart electronics is still restrained by their insufficient areal capacitance and limited power/energy densities. In addition, some electroactive materials, including metal oxides, conductive polymers, graphene, porous carbons, etc., are inevitable to use extra adhesives for the preparation of electrode materials. In this work, integrated hierarchical graphitic porous carbon membranes used as the electrodes without adhesives are successfully synthesized, via pyrolyzing poly(ionic liquid)s (PILs)-metal organic frameworks (MOFs) composite membranes. The asymmetric supercapacitor is assembled by the carbonized PIL-MOF composite membrane and PILs-derived porous carbon membrane, and exhibits significant areal capacitance with remarkable power and energy densities. In the two-electrode system, the areal capacitance can reach 9.5 F cm-2 with an energy density of 1.91 mWh cm-2 . In the fabricated all-solid-state supercapacitors, the areal capacitance and energy density achieved 3.2 F cm-2 and 0.65 mWh cm-2 , respectively, exceeding most reported ones. Therefore, the integrated carbon membrane electrodes with high areal capacitance reveal great potential in miniaturized devices, and further show a wider application scope through regulating PILs.

Biomass-Derived Flexible Carbon Architectures as Self-Supporting Electrodes for Energy Storage

With the swift advancement of the wearable electronic devices industry, the energy storage components of these devices must possess the capability to maintain stable mechanical and chemical properties after undergoing multiple bending or tensile deformations. This circumstance has expedited research efforts toward novel electrode materials for flexible energy storage devices. Nonetheless, among the numerous materials investigated to date, the incorporation of metal current collectors or insulative adhesives remains requisite, which entails additional costs, unnecessary weight, and high contact resistance. At present, biomass-derived flexible architectures stand out as a promising choice in electrochemical energy device applications. Flexible self-supporting properties impart a heightened mechanical performance, obviating the need for additional binders and lowering the contact resistance. Renewable, earth-abundant biomass endows these materials with cost-effectiveness, diversity, and modulable chemical properties. To fully exploit the application potential in biomass-derived flexible carbon architectures, understanding the latest advancements and the comprehensive foundation behind their synthesis assumes significance. This review delves into the comprehensive analysis of biomass feedstocks and methods employed in the synthesis of flexible self-supporting carbon electrodes. Subsequently, the advancements in their application in energy storage devices are elucidated. Finally, an outlook on the potential of flexible carbon architectures and the challenges they face is provided.

Molten salt-confined pyrolysis towards heteroatom-doped porous carbon nanosheets for high-energy-density Zn-ion hybrid supercapacitors

Carbon nanosheets with heteroatom doping and well-developed porosity exhibit broad application foreground for Zn-ion hybrid supercapacitors (ZHSCs), but the simple and controllable preparation is still of great challenge. In this study, by using LiCl-KCl as in-built templates, histidine as carbon and nitrogen sources, and KNO₃, K₂SO₄, KOH or Na₂S₂O₃ as active agent, a series of N and NS doped porous carbon nanosheets are developed. Results indicate that, with the activator introduction, pore structures of the carbonized products are notably boosted, showing an astounding 30-244 % increase in BET specific surface area, and meanwhile, heteroatom with a content of ca. 12 % can be doped into the resultant carbon skeletons. Specifically, the NSPCN-800 (activated by Na₂S₂O₃) with a large specific surface area of 1297 m²/g, a hierarchically porous structure composed of abundant micropores and mesopores, and a suitable heteroatom content (N: 11.9 wt%; S: 0.6 wt%) presents an impressive energy storage behavior as cathode for ZHSCs, including a specific capacitance of 165.8F/g, a specific capacity of 95.2 mAh/g, an energy density of 59.0 Wh kg^-1 and a cyclic stability with a 82.6 % capacity retention after 5000 cycles. These performance parameters surpass numerous reported ZHSCs, making NSPCN-800 a very promising cathode for practical use.