Nitrite reduction over Ag nanoarray electrocatalyst for ammonia synthesis

Investigation of catalytic methane oxidation over Ag/Co2MOx (M = Co, Ni, Cu) catalysts with varying interfacial electron transfer

Atom-doped Co3O4 catalysts loaded with Ag were examined as cost-effective catalysts for methane oxidation. The synthesized Ag/Co2NiOx catalysts exhibited distinctive surface characteristics in contrast with Ag/Co3O4 and Ag/Co2CuOx catalysts prepared using a similar method. Characterization results unveiled that Ag/Co2NiOx featured a higher presence of active surface oxygen species, lattice defects, a larger surface area, and enhanced reducibility. A methane oxidation catalytic performance followed the sequence: Ag/Co2NiOx > Ag/Co3O4 > Ag/Co2CuOx. The investigation delved into methane degradation pathways on the surfaces of three catalysts, examining their behavior under both aerobic and anaerobic atmospheres through in-situ DRIFTS analysis. Furthermore, introducing Ag showed a marked positive effect on Co-Ni mixed oxide, inducing electron transfer and a more active electron system, whereas it exhibited an inverse impact within the surface of Co-Cu mixed oxide. This work provides innovative perspectives on the development of forthcoming environmental catalysts.

High-efficiency electrocatalytic nitrite-to-ammonia conversion on molybdenum doped cobalt oxide nanoarray at ambient conditions

Electrochemical conversion of nitrite (NO2-) contaminant to green ammonia (NH3) is a promising approach to achieve the nitrogen cycle. The slow kinetics of the complex multi-reaction process remains a serious issue, and there is still a need to design highly effective and selective catalysts. Herein, we report that molybdenum doped cobalt oxide nanoarray on titanium mesh (Mo-Co3O4/TM) acts as a catalyst to facilitate electroreduction of NO2- to NH3. Such a catalyst delivers an extremely high Faradaic efficiency of 96.9 % and a corresponding NH3 yield of 651.5 μmol h-1 cm-2 at -0.5 V with strong stability. Density functional theory calculations reveal that the introduction of Mo can induce the redistribution of electrons around Co atoms and further strengthen the adsorption of NO2-, which is the key to facilitating the catalytic performance. Furthermore, the assembled battery based on Mo-Co3O4/TM suggests its practical application value.

Unveiling Cutting-Edge Developments in Electrocatalytic Nitrate-to-Ammonia Conversion

The excessive enrichment of nitrate in the environment can be converted into ammonia (NH3) through electrochemical processes, offering significant implications for modern agriculture and the potential to reduce the burden of the Haber-Bosch (HB) process while achieving environmentally friendly NH3 production. Emerging research on electrocatalytic nitrate reduction (eNitRR) to NH3 has gained considerable momentum in recent years for efficient NH3 synthesis. However, existing reviews on nitrate reduction have primarily focused on limited aspects, often lacking a comprehensive summary of catalysts, reaction systems, reaction mechanisms, and detection methods employed in nitrate reduction. This review aims to provide a timely and comprehensive analysis of the eNitRR field by integrating existing research progress and identifying current challenges. This review offers a comprehensive overview of the research progress achieved using various materials in electrochemical nitrate reduction, elucidates the underlying theoretical mechanism behind eNitRR, and discusses effective strategies based on numerous case studies to enhance the electrochemical reduction from NO3 - to NH3. Finally, this review discusses challenges and development prospects in the eNitRR field with an aim to guide design and development of large-scale sustainable nitrate reduction electrocatalysts.

Distinctive p-d Orbital Hybridization in CuSb Porous Nanonetworks for Enhanced Nitrite Electroreduction to Ammonia

Electrochemical nitrite reduction reaction (NO 2 - RR ${\mathrm{NO}}_{\mathrm{2}}^{\mathrm{ - }}{\mathrm{RR}}$ ), as a green and sustainable ammonia synthesis technology, has broad application prospects and environmental friendliness. Herein, an unconventional p-d orbital hybridization strategy is reported to realize the fabrication of defect-rich CuSb porous nanonetwork (CuSb PNs) electrocatalyst forNO 2 - RR ${\mathrm{NO}}_{\mathrm{2}}^ - {\mathrm{RR}}$ . The crystalline/amorphous heterophase structure is cleverly introduced into the porous nanonetworks, and this defect-rich structure exposes more atoms and activated boundaries. CuSb PNs exhibit a large NH3 yield (r N H 3 ${{r}_{{\mathrm{N}}{{{\mathrm{H}}}_{\mathrm{3}}}}}$ ) of 946.1 µg h-1m cat - 1 ${\mathrm{m}}_{{\mathrm{cat}}}^{ - {\mathrm{1}}}$ and a high faradaic efficiency (FE) of 90.7%. Experimental and theoretical studies indicate that the excellent performance of CuSb PNs results from the defect-rich porous nanonetworks structure and the p-d hybridization of Cu and Sb elements. This work describes a powerful pathway for the fabrication of p-d orbital hybrid defect-rich porous nanonetworks catalysts, and provides hope for solving the problem of nitrogen oxide pollution in the field of environment and energy.

Green synthesis of chitosan/glutamic acid/agarose/Ag nanocomposite hydrogel as a new platform for colorimetric detection of Cu ions and reduction of 4-nitrophenol

In this study, the green synthesis of chitosan/glutamic acid/agarose/Ag (Chi/GA/Aga/Ag) nanocomposite hydrogel was obtained via in situ reduction of Ag ions during the crosslinking process of chitosan-agarose double network hydrogels. The rich hydroxyl, carboxyl and amino groups in both agarose, chitosan, and glutamic acid can effectively control the growth, dispersion and immobilization of nearly spherical Ag nanoparticles (70 nm) in the Chi/GA/Aga/Ag composite hydrogel. Glutamic acids can act as the structure-directing agents to induce the formation of chitosan/glutamic acid hydrogel. The mechanical strength of the Chi/GA/Aga/Ag composite hydrogel can be enhanced by the introduction of chitosan-agarose double network hydrogels, which guarantees that it can be directly used as a visual test strip of the Cu ions with a lower detection limit of 1 μM and an active catalyst for the reduction of 4-nitrophenol within 18 min. The quantitative and semi-quantitative measurement of Cu ions can be carried out by UV-visible absorption spectroscopy and visual measurement, which provided a convenient, portable, and "naked-eye" solid-state detection methodology.

Silver Nanowires-Based Flexible Gold Electrode Overcoming Interior Impedance of Nanomaterial Electrodes

In the development of nanomaterial electrodes for improved electrocatalytic activity, much attention is paid to the compositions, lattice, and surface morphologies. In this study, a new concept to enhance electrocatalytic activity is proposed by reducing impedance inside nanomaterial electrodes. Gold nanodendrites (AuNDs) are grown along silver nanowires (AgNWs) on flexible polydimethylsiloxane (PDMS) support. The AuNDs/AgNWs/PDMS electrode affords an oxidative peak current density of 50 mA cm-2 for ethanol electrooxidation, a value ≈20 times higher than those in the literature do. Electrochemical impedance spectroscopy (EIS) demonstrates the significant contribution of the AgNWs to reduce impedance. The peak current densities for ethanol electrooxidation are decreased 7.5-fold when the AgNWs are electrolytically corroded. By in situ surface-enhanced Raman spectroscopy (SERS) and density functional theory (DFT) simulation, it is validated that the ethanol electrooxidation favors the production of acetic acid with undetectable CO, resulting in a more complete oxidation and long-term stability, while the AgNWs corrosion greatly decreases acetic acid production. This novel strategy for fabricating nanomaterial electrodes using AgNWs as a charge transfer conduit may stimulate insights into the design of nanomaterial electrodes.

Promoting Nitrite-to-Ammonia Electroreduction over Amorphous CoS2 Nanorods

Electrocatalytic nitrite reduction to ammonia (NO2RR) emerges as a promising route to simultaneously attain harmful NO2- removal and green NH3 synthesis. In this study, amorphous CoS2 nanorods (a-CoS2) are first demonstrated as an effective NO2RR catalyst, which exhibits the maximum FENH3 of 88.7% and NH3 yield rate of 438.1 μmol h-1 cm-2 at -0.6 V vs RHE. Detailed experimental and computational investigations reveal that the high NO2RR performance of a-CoS2 originates from the amorphization-induced S vacancies to facilitate NO2- activation and hydrogenation, boost the electron transport kinetics, and inhibit the competitive hydrogen evolution.

Development of Promising Flower-like Ag/SrFeO3 Nanosheet Electrode Materials: An Efficient and Selective Electrocatalytic Detection of Caffeic Acid in Coffee and Green Tea

The development of highly efficient electrocatalytic sensors is necessary for detection in various paramedical and industrial applications. Motivated by this concept, we demonstrate flower-like Ag/SrFeO3 nanostructures prepared by a facile route to modify electrocatalyst material for the detection of caffeic acid (CA). The surface morphology, phase structure, particle size, and pore volume were investigated through different physicochemical analytical techniques. The cyclic voltammetry technique was employed to evaluate the electrochemical behavior of both glassy carbon and modified Ag/SrFeO3 electrodes toward CA. The study revealed that the modified electrode shows excellent electrocatalytic activity toward CA compared to the reported values, with a wide linear range of 1-15 nM, a detection limit of 23 nM, good stability, and excellent repeatability. The superior results are attributed to numerous factors such as rapid electron transfer ability, tunable texture, high surface area, and good conductivity. The created Ag/SrFeO3 nanostructure-based electrochemical biosensor is a potential candidate for real-time analytical performance to directly detect CA in commercially available coffee and green tea without any pre-treatment.

Cu/NiO nanorods for efficiently promoting the electrochemical nitrate reduction to ammonia

The electrochemical nitrate reduction reaction (ENO3RR) is a green ammonia synthesis method under ambient conditions relative to the traditional Haber-Bosch technology, which does not require high-temperature or high-pressure conditions and can convert nitrate pollutants in the environment into value-added NH3, thus achieving a dual purpose. However, more electrocatalysts with a remarkable performance towards high-efficiency ENO3RR need to be developed. In this work, a Cu/NiO-NF composite electrocatalyst with a nanorod structure on nickel foam was successfully fabricated, which contains heterogeneous interfaces between Cu and NiO toward selective electrocatalytic nitrate reduction for ammonia synthesis. The steric nanorod morphology of the catalyst can significantly increase the surface area, expose more active sites, and improve the reaction activity. Moreover, the construction of the composite and the interface effectively boosts the synergistic effect of the active species Cu and NiO, which can regulate the electronic structure of the catalyst, expose more active sites, enhance the conductivity of the material, and accelerate the interfacial electron transfer, thereby further promoting the ENO3RR performance. This Cu/NiO-NF composite exhibits a high NH3 yield of 0.6 mmol h-1 cm-2 and up to 97.81% faradaic efficiency at the optimal applied potential of -1.0 V (vs. RHE) in a concentration of 0.1 M NO3--containing 0.1 M PBS. Furthermore, it demonstrates excellent electrochemical cycle stability. This work provides insights into the rational design and fabrication of ENO3RR electrocatalysts for potential electrocatalytic applications.

High-Efficiency Electroreduction of Nitrite to Ammonia on Ni Nanoparticles Strutted 3D Honeycomb-Like Porous Carbon Framework

Electroreduction of nitrite (NO2 - ) to ammonia (NH3 ) provides a sustainable approach to yield NH3 , whilst eliminating NO2 - contaminants. In this study, Ni nanoparticles strutted 3D honeycomb-like porous carbon framework (Ni@HPCF) is fabricated as a high-efficiency electrocatalyst for selective reduction of NO2 - to NH3 . In 0.1 M NaOH with NO2 - , such Ni@HPCF electrode obtains a significant NH3 yield of 12.04 mg h-1  mgcat. -1 and a Faradaic efficiency of 95.1 %. Furthermore, it exhibits good long-term electrolysis stability.

Self-supported P-doped NiFe2O4 micro-sheet arrays for the efficient conversion of nitrite to ammonia

The nitrite reduction reaction (NO2-RR) is an important process for eliminating toxic nitrites from water while simultaneously producing high-value ammonia under ambient conditions. For the aim to improve the NO2-RR efficiency, we designed a new synthetic strategy to prepare a phosphorus-doped three-dimensional NiFe2O4 catalyst loaded onto a nickel foam in-situ and evaluated its performance for the reduction of NO2- to NH3. The catalyst achieved a high Faradaic efficiency (FE) of 95.39%, and an ammonia (NH3) yield rate of 34788.51 µg h-1 cm-2 at - 0.45 V vs. RHE. A high NH3 yield rate and FE were maintained after 16 cycles at - 0.35 V vs. RHE in an alkaline electrolyte. This study provides a new direction for the rational design of highly stable electrocatalysts for the conversion of NO2- to NH3.

Nb-doped NiO nanoflowers for nitrite electroreduction to ammonia

Electrocatalytic reduction of nitrite to ammonia (NO2RR) is considered as an appealing route to simultaneously achieve sustainable ammonia production and abate hazardous nitrite pollution. Herein, atomically Nb-doped NiO nanoflowers are designed as a high-performance NO2RR catalyst, which exhibits the highest NH3-Faradaic efficiency of 92.4% with an NH3 yield rate of 200.5 μmol h-1 cm-2 at -0.6 V RHE. Theoretical calculations unravel that Nb dopants can act as Lewis acid sites to render effective NO2- activation, decreased protonation energy barriers, and restricted hydrogen evolution, ultimately leading to a high NO2RR selectivity and activity.

Nanoengineering Metal-Organic Frameworks and Derivatives for Electrosynthesis of Ammonia

Electrocatalytic synthesis under mild conditions has become increasingly important as one of the practical alternatives for industrial applications, especially for the green ammonia (NH3) industry. A properly engineered electrocatalyst plays a vital role in the realization of superior catalytic performance. Among various types of promising nanomaterials, metal-organic frameworks (MOFs) are competitive candidates for developing efficient electrocatalytic NH3 synthesis from simple nitrogen-containing molecules or ions, such as N2 and NO3-. In this review, recent advances in the development of electrocatalysts derived from MOFs for the electrosynthesis of NH3 are collected, categorized, and discussed, including their application in the N2 reduction reaction (NRR) and the NO3- reduction reaction (NO3RR). Firstly, the fundamental principles are illustrated, such as plausible mechanisms of NH3 generation from N2 and NO3-, the apparatus of corresponding electrocatalysis, parameters for evaluation of reaction efficiency, and detection methods of yielding NH3. Then, the electrocatalysts for NRR processes are discussed in detail, including pristine MOFs, MOF-hybrids, MOF-derived N-doped porous carbons, single atomic catalysts from pyrolysis of MOFs, and other MOF-related materials. Subsequently, MOF-related NO3RR processes are also listed and discussed. Finally, the existing challenges and prospects for the rational design and fabrication of electrocatalysts from MOFs for electrochemical NH3 synthesis are presented, such as the evolution of investigation methods with artificial intelligence, innovation in synthetic methods of MOF-related catalysts, advancement of characterization techniques, and extended electrocatalytic reactions.

High-efficiency electrocatalytic nitrite reduction toward ammonia synthesis on CoP@TiO2 nanoribbon array

Electrochemical reduction of nitrite (NO₂^-) can satisfy the necessity for NO₂^- contaminant removal and deliver a sustainable pathway for ammonia (NH₃) generation. Its practical application yet requires highly efficient electrocatalysts to boost NH₃ yield and Faradaic efficiency (FE). In this study, CoP nanoparticle-decorated TiO₂ nanoribbon array on Ti plate (CoP@TiO₂/TP) is verified as a high-efficiency electrocatalyst for the selective reduction of NO₂^- to NH₃. When measured in 0.1 M NaOH with NO₂^-, the freestanding CoP@TiO₂/TP electrode delivers a large NH₃ yield of 849.57 μmol h^-1 cm^-2 and a high FE of 97.01% with good stability. Remarkably, the subsequently fabricated Zn-NO₂^- battery achieves a high power density of 1.24 mW cm^-2 while delivering a NH₃ yield of 714.40 μg h^-1 cm^-2.

NiMoO4 nanorods with oxygen vacancies self-supported on Ni foam towards high-efficiency electrocatalytic conversion of nitrite to ammonia

As an eco-friendly and sustainable strategy, the electrochemical reduction of nitrite (NO₂^-) can simultaneous generation of NH₃ and treatment of NO₂^- contamination in the environment. Herein, monoclinic NiMoO₄ nanorods with abundant oxygen vacancies self-supported on Ni foam (NiMoO₄/NF) are considered high-performance electrocatalysts for ambient NH₃ synthesis by reduction of NO₂^-, which can deliver an outstanding yield of 18089.39 ± 227.98 μg h^-1 cm^-2 and a preferable FE of 94.49 ± 0.42% at -0.8 V. Additionally, its performance remains relatively stable during long-term operation as well as cycling tests. Furthermore, density functional theory calculations unveil the vital role of oxygen vacancies in promoting nitrite adsorption and activation, ensuring efficient NO₂^-RR towards NH₃. A Zn-NO₂^- battery with NiMoO₄/NF as the cathode shows high battery performance as well.

Ruthenium doping: An effective strategy for boosting nitrite electroreduction to ammonia over titanium dioxide nanoribbon array

Electrochemical reduction of nitrite (NO₂^-) not only removes NO₂^- contaminant but also produces high-added value ammonia (NH₃). This process, however, needs efficient and selective catalysts for NO₂^--to-NH₃ conversion. In this study, Ruthenium doped titanium dioxide nanoribbon array supported on Ti plate (Ru-TiO₂/TP) is proposed as an efficient electrocatalyst for the reduction of NO₂^- to NH₃. When operated in 0.1 M NaOH containing NO₂^-, such Ru-TiO₂/TP achieves an ultra-large NH₃ yield of 1.56 mmol h^-1 cm^-2 and a super-high Faradaic efficiency of 98.9%, superior to its TiO₂/TP counterpart (0.46 mmol h^-1 cm^-2, 74.1%). Furthermore, the reaction mechanism is studied by theoretical calculation.

Rational Construction of Heterostructured Cu3 P@TiO2 Nanoarray for High-Efficiency Electrochemical Nitrite Reduction to Ammonia

Electroreduction of nitrite (NO₂ ^- ) to valuable ammonia (NH₃ ) offers a sustainable and green approach for NH₃ synthesis. Here, a Cu₃ P@TiO₂ heterostructure is rationally constructed as an active catalyst for selective NO₂ ^- -to-NH₃ electroreduction, with rich nanosized Cu₃ P anchored on a TiO₂ nanoribbon array on Ti plate (Cu₃ P@TiO₂ /TP). When performed in the 0.1 m NaOH with 0.1 m NaNO₂ , the Cu₃ P@TiO₂ /TP electrode obtains a large NH₃ yield of 1583.4 µmol h^-1  cm^-2 and a high Faradaic efficiency of 97.1%. More importantly, Cu₃ P@TiO₂ /TP also delivers remarkable long-term stability for 50 h electrolysis. Theoretical calculations indicate that intermediate adsorption/conversion processes on Cu₃ P@TiO₂ interfaces are synergistically optimized, substantially facilitating the conversion of NO₂ ^- -to-NH₃ .

Ambient ammonia synthesis via nitrite electroreduction over NiS2 nanoparticles-decorated TiO2 nanoribbon array

Nitrite (NO₂^-), as a N-containing pollutant, widely exists in aqueous solution, causing a series of environmental and health problems. Electrocatalytic NO₂^- reduction is a promising and sustainable strategy to remove NO₂^-, meanwhile, producing high value-added ammonia (NH₃). But the NO₂^- reduction reaction (NO₂^-RR) involves complex 6-electron transfer process that requires high-efficiency electrocatalysts to accomplish NO₂^--to-NH₃ conversion. Herein, we report NiS₂ nanoparticles decorated TiO₂ nanoribbon array on titanium mesh (NiS₂@TiO₂/TM) as a fantastic NO₂^-RR electrocatalyst for ambient NH₃ synthesis. When tested in NO₂^--containing solution, NiS₂@TiO₂/TM achieves a satisfactory NH₃ yield of 591.9 µmol h^-1 cm^-2 and a high Faradaic efficiency of 92.1 %. Besides, it shows remarkable stability during 12-h electrolysis test.

High-efficiency electroreduction of nitrite to ammonia on a Cu@TiO2 nanobelt array

Electrochemical nitrite (NO₂^-) reduction is a potential and sustainable route to produce high-value ammonia (NH₃), but it requires highly active electrocatalysts. Herein, Cu nanoparticles anchored on a TiO₂ nanobelt array on a titanium plate (Cu@TiO₂/TP) are reported as a high-efficiency electrocatalyst for NO₂^--to-NH₃ conversion. The designed Cu@TiO₂/TP catalyst exhibits outstanding catalytic performance toward the NO₂^-RR, with a high NH₃ yield of 760.5 μmol h^-1 cm^-2 (237.7 μmol h^-1 mg_cat.^-1) and an excellent faradaic efficiency of 95.3% in neutral solution. Meanwhile, it also presents strong electrochemical stability during cyclic tests and long-term electrolysis.

Single-Step Synthesis of Fe-Fe3 O4 Catalyst for Highly Efficient and Selective Electrochemical Nitrogen Reduction

Nitrogen reduction electrocatalysts are highly attractive for catalytic science. However, most electrocatalysts are limited by their low faradaic efficiency, poor ammonia yield, and tedious and costly catalyst synthesis process. In this work, Fe-based oxide composite nanoparticles with steady chemical states are prepared by a single-step green procedure under ambient conditions. The resulting Fe-Fe₃ O₄ demonstrates remarkable activity and selectivity for nitrogen reduction reaction (NRR) with the highest faradaic efficiency of 53.2±1.8 % and NH₃ yield rate of 24.6±0.8 μg h^-1  mg_cat. ^-1 at -0.4 V (vs. RHE) in 0.1 m Na₂ SO₄ electrolyte. Characterization experiments and theoretical calculation reveal that Fe-Fe₃ O₄ exhibits significantly enhanced charge transfer capability and suppresses the competitive HER process.

Binary organic-inorganic nanocomposite of polyaniline-MnO2 for non-enzymatic electrochemical detection of environmental pollutant nitrite

Due to wide usage as nitrogen fertilizer in agriculture and food additive in industry, nitrite, as one of inorganic environmental pollutants, could cause detrimental effects to the ecological environment. Therefore, accurate, sensitive and rapid detection of nitrite is necessary. In this work, binary hybrid polyaniline-MnO₂ organic-inorganic nanocomposite is prepared chemically and characterized via X-ray diffraction spectroscopy, Fourier-transform infrared spectroscopy, scanning electron microscopy and energy-dispersive X-ray spectroscopy. Polyaniline-MnO₂ organic-inorganic nanocomposite serves as excellent electrode modifier for electrochemical sensing of nitrite by two modes of cyclic voltammetry and chronoamperometry, achieving broad linear ranges and low limits of detection for both methods. Moreover, the organic-inorganic nanocomposite displays satisfactory sensing performance in real water sample analysis. Amine and imino groups of polyaniline contribute to the better adsorption behavior of nitrite onto the nanocomposite, which improves the nanocomposite's sensing performance. In summary, the synergistic effects between polyaniline and MnO₂ is taken advantaged in the nanocomposite for effective electrochemical sensor development.

In Situ Derived Co2B Nanosheet Array: A High-Efficiency Electrocatalyst for Ambient Ammonia Synthesis via Nitrate Reduction

Ambient ammonia synthesis via electrochemical nitrate (NO3-) reduction is regarded as a green alternative to the Haber-Bosch process. Herein, we report the in situ derivation of an amorphous Co2B layer on a Co3O4 nanosheet array on a Ti mesh (Co2B@Co3O4/TM) for efficient NH3 production via selective electroreduction of NO3- under ambient conditions. In 0.1 M PBS and 0.1 M NaNO3, Co2B@Co3O4/TM exhibits a maximum Faradaic efficiency of 97.0% at -0.70 V and a remarkable NH3 yield of 8.57 mg/h/cm2 at -1.0 V, with durability for stable NO3--to-NH3 conversion over eight recycling tests and 12 h of electrolysis. Additionally, it can be applied as an efficient cathode material for Zn-NO3- batteries to produce NH3 while generating electricity. The catalytic mechanisms on Co2B@Co3O4 are further revealed by theoretical calculations.

Cu nanoparticles decorated juncus-derived carbon for efficient electrocatalytic nitrite-to-ammonia conversion

Electrocatalytic nitrite reduction to value-added NH₃ can simultaneously achieve sustainable ammonia production and N-contaminant removal in natural environments, which has attracted widespread attention but still lacks efficient catalysts. In this work, Cu nanoparticles decorated juncus-derived carbon can be proposed as a high-active electrocatalyst for NO₂^--to-NH₃ conversion, obtaining a high Faradaic efficiency of 93.2% and a satisfactory NH₃ yield of 523.5 μmol h^-1 mg_cat.^-1. Density functional theory calculations were applied to uncover insightful understanding of internal catalytic mechanism.

Ni nanoparticle-decorated biomass carbon for efficient electrocatalytic nitrite reduction to ammonia

Electrocatalytic nitrite (NO₂^-) reduction to ammonia (NH₃) can not only synthesize value-added NH₃, but also remove NO₂^- pollutants from the environment. However, the low efficiency of NO₂^--to-NH₃ conversion hinders its applications. Here, Ni nanoparticle-decorated juncus-derived biomass carbon prepared at 800 °C (Ni@JBC-800) serves as an efficient catalyst for NH₃ synthesis by selective electroreduction of NO₂^-. This catalyst shows a remarkable NH₃ yield of 4117.3 μg h^-1 mg_cat.^-1 and a large faradaic efficiency of 83.4% in an alkaline electrolyte. The catalytic mechanism is further investigated by theoretical calculations.

High-Efficiency Ammonia Electrosynthesis on Anatase TiO2-x Nanobelt Arrays with Oxygen Vacancies by Selective Reduction of Nitrite

Electrocatalytic reduction of nitrite to NH₃ provides a new route for the treatment of nitrite in wastewater, as well as an attractive alternative to NH₃ synthesis. Here, we report that an oxygen vacancy-rich TiO_2-x nanoarray with different crystal structures self-supported on the Ti plate can be prepared by hydrothermal synthesis and by subsequently annealing it in an Ar/H₂ atmosphere. Anatase TiO_2-x (A-TiO_2-x) can be a superb catalyst for the efficient conversion of NO₂^- to NH₃; a high NH₃ yield of 12,230.1 ± 406.9 μg h^-1 cm^-2 along with a Faradaic efficiency of 91.1 ± 5.5% can be achieved in a 0.1 M NaOH solution containing 0.1 M NaNO₂ at -0.8 V, which also exhibits preferable durability with almost no decay of catalytic performances after cycling tests and long-term electrolysis. Furthermore, a Zn-NO₂^- battery with such A-TiO_2-x as a cathode delivers a power density of 2.38 mW cm^-2 as well as a NH₃ yield of 885 μg h^-1 cm^-2.

High-Efficiency Electrosynthesis of Ammonia with Selective Reduction of Nitrate in Neutral Media Enabled by Self-Supported Mn2CoO4 Nanoarray

Ambient ammonia synthesis by electroreduction of nitrate (NO3-) provides us a sustainable and environmentally friendly alternative to the traditional Haber-Bosch process. In this work, Mn2CoO4 nanoarray grown on carbon cloth (Mn2CoO4/CC) serves as a superior electrocatalyst for efficient NH3 synthesis by selective reduction of NO3-. When operated in 0.1 M PBS with 0.1 M NaNO3, Mn2CoO4/CC reaches a high Faraday efficiency of 98.6% and a large NH3 yield up to 11.19 mg/h/cm2. Moreover, it exhibits excellent electrocatalytic stability. Theory calculations show that the Mn2CoO4 surface has strong interaction with NO3-, which can effectively inhibit the occurrence of hydrogen evolution, beneficial for NO3--to-NH3 conversion.

Plasma-etched Ti2O3 with oxygen vacancies for enhanced NH3 electrosynthesis and Zn–N2 batteries

Plasma-etched OV-Ti2O3 behaves as an active and stable catalyst for electrochemical N2 reduction to yield NH3, capable of attaining a large NH3 yield of 37.24 μg h−1 mgcat.−1 and high faradaic efficiency of 19.29%.

Amorphous CoB nanoarray as a high-efficiency electrocatalyst for nitrite reduction to ammonia

Amorphous CoB nanoarray is a high-efficiency catalyst for electrocatalytic NO2−-to-NH3 conversion, capable of attaining a large NH3 yield of 233.1 μmol h−1 cm−2 and a high faradaic efficiency of 95.2% at −0.7 V in 0.1 M Na2SO4 with 400 ppm NO2−.