Recycling of waste power lithium-ion batteries to prepare nickel/cobalt/manganese -containing catalysts with inter-valence cobalt/manganese synergistic effect for peroxymonosulfate activation

From graphite of used lithium-ion batteries to holey graphite coated by carbon with enhanced lithium storage capability

The efficient recycling of waste graphite anode from used lithium-ion batteries (LIBs) has attracted considerable concerns mainly owing to the environment protection and reutilization of resources. Herein, we reported a rational and facile strategy for the synthesis of holey graphite coated by carbon (hG0.01@C0.10) through the separation, purification and creation of holey structures of waste graphite by using NaOH and carbon-coating by using phenolic resin. The holey structures facilitate the hG0.01@C0.10 with the quick penetration of electrolytes and rapid diffusion of Li+. The carbon coating is more favorable for hG0.01@C0.10 with improved electronic conductivity and less alleviated volume during the cycles. Benefiting from the synergistic effect of holey structures and carbon coating, the hG0.01@C0.10 as anode for LIBs displays a high reversible capacity of 377.6 mAh g-1 at 0.5 C and superior rate capabilities (e.g., 348.0 and 274.7 mAh g-1 at 1 and 2 C, respectively) and maintains a high reversible capacity of 278.7 mAh g-1 at 1 C after 300 cycles with an initial capacity retention of 80.0 %.

Oxygen vacancies-enriched spent lithium-ion battery cathode materials loaded catalytic membrane for effective peracetic acid activation and organic pollutants degradation

Advanced oxidation processes combined with membrane filtration technique offer a promising approach for pollution mitigation and catalyst recovery. Herein, a waste ternary lithium-ion battery cathode material of LiNixCoyMnzO2 (LNCM) loaded polytetrafluoroethylene (PTFE) membrane was synthesized for peracetic acid (PAA) activation (LNCM-PTFE/PAA) and 2,4,6-trichlorophenol (TCP) degradation. Such a novel membrane, with a catalyst loading of 10 mg (0.796 mg/cm2) of LNCM achieved 96.4 % removal of TCP (2 mg/L) within 20 min in neutral pH. The redox cycles of surface metals (such as Co3+/Co2+, Ni3+/Ni2+, and Mn4+/Mn3+/Mn2+) in spent LNCM efficiently enhance charge transfer and mediated PAA activation. And intrinsic oxygen vacancies in LNCM facilitated PAA adsorption and its cleavage. The resulting carbon-centered radicals (R-C•, CH3C(O)OO•) and 1O2 are identified as the primary reactive species that collaboratively participate in TCP degradation. Quantitative structure-activity relationship analysis demonstrated a substantial reduction in product toxicity. The successful practical application of the LNCM-PTFE/PAA membrane was exemplified by treating chlorophenol industrial wastewater. This study presents a new LNCM-PTFE/PAA catalytic membrane for high-efficiency water treatment and a novel perspective for green utilization of waste LNCM.

Rational design of waste anode graphite-derived carbon catalyst to activate peroxymonosulfate for atrazine degradation

As the rapidly growing number of waste lithium-ion batteries (LIBs), the recycling and reutilization of anode graphite is of increasing interest. Converting waste anode graphite into functional materials may be a sensible option. Herein, a series of carbonaceous catalysts (TG) were successfully prepared using spent anode graphite calcined at various temperatures and applied for activating peroxymonosulfate (PMS) to degrade atrazine (ATZ). The catalyst obtained at 800 °C (TG-800) showed the optimum performance for ATZ removal (99.2% in 6 min). Various experimental conditions were explored to achieve the optimum efficiency of the system. In the TG-800/PMS system, free radicals (e.g., SO4·-, HO·), singlet oxygen (1O2), together with a direct electron transfer pathway all participated in ATZ degradation, and the ketonic (CO) group was proved as the leading catalytic site for PMS activation. The potential degradation routes of ATZ have also been presented. According to the toxicity assessment experiments, the toxicity of the intermediate products decreased. The reusability and universal applicability of the TG-800 were also confirmed. This research not only provides an efficient PMS activator for pollutant degradation, but also offers a meaningful reference for the recovery of waste anode graphite to develop environmentally functional materials.

Z-scheme heterojunction photocatalyst formed by MOF-derived C-TiO2 and Bi2WO6 for enhancing degradation of oxytetracycline: Mechanistic insights and toxicity evaluation in the presence of a single active species

In the work, Bi2WO6/C-TiO2 photocatalyst was successfully synthesized for the first time by loading narrow bandgap semiconductor Bi2WO6 on MOF-derived carboxyl modified TiO2. The phase structure, morphology, photoelectric properties, surface chemical states and photocatalytic performance of the prepared photocatalysts were systematically investigated using various characterization tools. The degradation efficiency of oxytetracycline by 6BT Z-scheme heterojunction photocatalyst under visible light could reach 93.6 % within 100 min, which was related to the high light harvesting and effective separation and transfer of photo-generated carriers. Furthermore, the effects of various environmental factors in actual wastewater were further investigated, and the results showed that 6BT exhibited good adaptability, durability and resistance to interference. Unlike most works, the degradation system with a different single active species were designed and constructed based on their formation mechanism. In addition, for the first time, a positive study was conducted on the priority attack sites, intermediate products, and degradation pathways for the photocatalytic degradation of oxytetracycline by a single active species through HPLC-MS and Fukui index calculations. The toxicity changes of intermediate products produced in three different single active species oxidation systems were evaluated using toxicity assessment software tools (T.E.S.T.), Escherichia coli growth experiments, and wheat growth experiments. Among them, the intermediate products formed through O2- oxidation had the lowest toxicity and the main active sites it attacked were the 20C, 38O, 18C, 41O, and 55O atoms with high f+ values in the oxytetracycline molecular structure. This work provided the insight into the role of each active species in the degradation of antibiotics and offered new ideas for the design and synthesis of efficient and eco-friendly photocatalysts.

Unveiling the lithium deintercalation mechanisms in spent lithium-ion batteries via sulfation roasting

Recovery of valuable metals from spent lithium-ion batteries (LIBs) is of great importance for resource sustainability and environmental protection. This study introduced pyrite ore (FeS2) as an alternative additive to achieve the selective recovery of Li2CO3 from spent LiCoO2 (LCO) batteries. The mechanism study revealed that the sulfation reaction followed two pathways. During the initial stage (550 °C-800 °C), the decomposition and oxidation of FeS2 and the subsequent gas-solid reaction between the resulting SO2 and layered LCO play crucial roles. The sulfation of lithium occurred prior to cobalt, resulting in the disruption of layered structure of LCO and the transformation into tetragonal spinel. In the second stage (over 800 °C), the dominated reactions were the decomposition of orthorhombic cobalt sulfate and its combination with rhombohedral Fe2O3 to form CoFe2O4. The deintercalation of Li from LCO by the substitution of Fe and conversion of Co(III)/Fe(II) into Co3O4/CoFe2O4 were further confirmed by density functional theory (DFT) calculation results. This fundamental understanding of the sulfation reaction facilitated the future development of lithium extraction methods that utilized additives to substantially reduce energy consumption.

Performance and mechanistic studies of rapid atenolol degradation through peroxymonosulfate activation by V, Co, and bamboo carbon catalyst

Developing the Co-based catalysts with high reactivity for the sulfate radical (SO4-·)-based advanced oxidation processes (SR-AOPs) has been attracting numerous attentions. To improve the peroxymonosulfate (PMS) activation process, a novel Co-based catalyst simultaneously modified by bamboo carbon (BC) and vanadium (V@CoO-BC) was fabricated through a simple solvothermal method. The atenolol (ATL) degradation experiments in V@CoO-BC/PMS system showed that the obtained V@CoO-BC exhibited much higher performance on PMS activation than pure CoO, and the V@CoO-BC/PMS system could fully degrade ATL within 5 min via the destruction of both radicals (SO4-· and O2-··) and non-radicals (1O2). The quenching experiments and electrochemical tests revealed that the enhancing mechanism of bamboo carbon and V modification involved four aspects: (i) promoting the PMS and Co ion adsorption on the surface of V@CoO-BC; (ii) enhancing the electron transfer efficiency between V@CoO-BC and PMS; (iii) activating PMS with V3+ species; (iv) accelerating the circulation of Co2+ and Co3+, leading to the enhanced yield of reactive oxygen species (ROS). Furthermore, the V@CoO-BC/PMS system also exhibited satisfactory stability under broad pH (3-9) and good efficiency in the presence of co-existing components (HCO3-, NO3-, Cl-, and HA) in water. This study provides new insights to designing high-performance, environment-friendly bimetal catalysts and some basis for the remediation of antibiotic contaminants with SR-AOPs.

Designing advanced S-scheme CdS QDs/La-Bi2WO6 photocatalysts for efficient degradation of RhB

Finding effective strategies to design efficient photocatalysts and decompose refractory organic compounds in wastewater is a challenging problem. Herein, by coupling element doping and constructing heterostructures, S-scheme CdS QDs/La-Bi2WO6 (CS/LBWO) photocatalysts are designed and synthesized by a simple hydrothermal method. As a result, the RhB degradation efficiency of the optimized 5% CS/LBWO reached 99% within 70 min of illumination with excellent stability and recyclability. CS/LBWO shows improvement in the adsorption range of visible light and promotes electron-hole pair generation/migration/separation, attributing the superior degradation performance. The degradation RhB mechanism is proposed by a free radical capture experiment, electron paramagnetic resonance, and high-performance liquid chromatography-mass spectrometry results, indicating that h+ and •O2 - play a significant role during four degradation processes: de-ethylation, chromophore cleavage, ring opening, and mineralization. Based on in situ irradiated X-ray photoelectron spectroscopy, Mulliken electronegativity theory, and the work function results, the S-scheme heterojunction of CS/LBWO promotes the transfer of photogenerated electron-hole pairs and promotes the generation of reactive radicals. This work not only reports that 5% CS/LBWO is a promising photocatalyst for degradation experiments but also provides an approach to design advanced photocatalysts by coupling element doping and constructing heterostructures.

Peroxymonosulfate Activation by Facile Fabrication of α-MnO2 for Rhodamine B Degradation: Reaction Kinetics and Mechanism

The persulfate-based advanced oxidation process has been an effective method for refractory organic pollutants' degradation in aqueous phase. Herein, α-MnO₂ with nanowire morphology was facially fabricated via a one-step hydrothermal method and successfully activated peroxymonosulfate (PMS) for Rhodamine B (RhB) degradation. Influencing factors, including the hydrothermal parameter, PMS concentration, α-MnO₂ dosage, RhB concentration, initial pH, and anions, were systematically investigated. The corresponding reaction kinetics were further fitted by the pseudo-first-order kinetic. The RhB degradation mechanism via α-MnO₂ activating PMS was proposed according to a series of quenching experiments and the UV-vis scanning spectrum. Results showed that α-MnO₂ could effectively activate PMS to degrade RhB and has good repeatability. The catalytic RhB degradation reaction was accelerated by increasing the catalyst dosage and the PMS concentration. The effective RhB degradation performance can be attributed to the high content of surface hydroxyl groups and the greater reducibility of α-MnO₂, and the contribution of different ROS (reactive oxygen species) was ¹O₂ > O2·- > SO4·- > ·OH.

Applications of Spent Lithium Battery Electrode Materials in Catalytic Decontamination: A Review

For a large amount of spent lithium battery electrode materials (SLBEMs), direct recycling by traditional hydrometallurgy or pyrometallurgy technologies suffers from high cost and low efficiency and even serious secondary pollution. Therefore, aiming to maximize the benefits of both environmental protection and e-waste resource recovery, the applications of SLBEM containing redox-active transition metals (e.g., Ni, Co, Mn, and Fe) for catalytic decontamination before disposal and recycling has attracted extensive attention. More importantly, the positive effects of innate structural advantages (defects, oxygen vacancies, and metal vacancies) in SLBEMs on catalytic decontamination have gradually been unveiled. This review summarizes the pretreatment and utilization methods to achieve excellent catalytic performance of SLBEMs, the key factors (pH, reaction temperature, coexisting anions, and catalyst dosage) affecting the catalytic activity of SLBEM, the potential application and the outstanding characteristics (detection, reinforcement approaches, and effects of innate structural advantages) of SLBEMs in pollution treatment, and possible reaction mechanisms. In addition, this review proposes the possible problems of SLBEMs in practical decontamination and the future outlook, which can help to provide a broader reference for researchers to better promote the implementation of “treating waste to waste” strategy.