PtCuFe alloy nanochains: Synthesis and composition-performance relationship in methanol oxidation and hydrogen evolution reactions

Facile and Rapid Synthesis of Ultra-Low-Loading Pt-Based Catalyst Boosting Electrocatalytic Hydrogen Production

The development of a low-cost hydrogen evolution reaction (HER) catalyst is crucial for the implementation of hydrogen production via water electrolysis. Herein, a facile and rapid electrodeposition method to synthesize an ultra-low-loading platinum-based catalyst in a short time of 120 s without any other chemical additive is reported. A functionalized nitrogen-doped carbon nanotube (F-N-CNT) is utilized as a carbon support to controllably and effectively anchor the Pt species. With partially oxidized and unzipped, the surface of F-N-CNT is characterized with zig-zag graphene-like nanodomains, which provide enriched deposition sites for Pt species and act as a buffer preventing the agglomeration and overloading of the Pt. Due to rational design of the interfacial chemical environment, the optimized Pt/F-N-CNTs catalyst possesses an ultra-low loading of 1.37 wt% but delivers a prominent HER activity superior to commercial 20 wt% Pt/C. Therefore, this work provides a novel approach to preparing the Pt-based catalyst with outstanding activity and rational loading.

Enhanced methanol electro-oxidation activity of CuO nanoparticles derived from the thermal decomposition of a CuII salophen type coordination compound

Electrocatalysts based on Cu compounds have been considered as a suitable alternative to platinum compounds due to their low cost, high abundance, excellent redox properties, and performing the methanol oxidation reaction (MOR) at low potentials. This article represents a study of CuO nanoparticles (NPs) prepared through a simple method of thermal decomposition of the CuL coordination compound (H2L = N,N'-bis(salicylidene)-4-chloro-1,2-diaminobenzene), C20H13ClCuN2O2, as a precursor by different electrochemical methods. A comparison of the MOR ability of precursor (CuL) and CuO NPs shows that both compounds are active, but CuO NPs present a peak current density of about 248 mA cm- 2 when screened for catalytic MOR in 1.0 M KOH with 0.5 M methanol, which is superior to the performance of CuL and some previously reported related catalysts based on CuO. The methanol oxidation peak at 0.69 V vs. Ag/AgCl is also more intense than CuL (0.77 V). The modified electrode with CuO NPs also shows lower onset potential, lower Tafel slope, higher electrochemically active surface area (ECSA) and better stability compared to the CuL electrode. These advantages can be assigned to the higher activity of catalytic sites and the lower charge transfer resistance of CuO due to its higher electrical conductivity than the CuL.

Recent Advances and Perspectives on Coupled Water Electrolysis for Energy-Saving Hydrogen Production

Overall water splitting (OWS) to produce hydrogen has attracted large attention in recent years due to its ecological-friendliness and sustainability. However, the efficiency of OWS has been forced by the sluggish kinetics of the four-electron oxygen evolution reaction (OER). The replacement of OER by alternative electrooxidation of small molecules with more thermodynamically favorable potentials may fundamentally break the limitation and achieve hydrogen production with low energy consumption, which may also be accompanied by the production of more value-added chemicals than oxygen or by electrochemical degradation of pollutants. This review critically assesses the latest discoveries in the coupled electrooxidation of various small molecules with OWS, including alcohols, aldehydes, amides, urea, hydrazine, etc. Emphasis is placed on the corresponding electrocatalyst design and related reaction mechanisms (e.g., dual hydrogenation and N-N bond breaking of hydrazine and C═N bond regulation in urea splitting to inhibit hazardous NCO- and NO- productions, etc.), along with emerging alternative electrooxidation reactions (electrooxidation of tetrazoles, furazans, iodide, quinolines, ascorbic acid, sterol, trimethylamine, etc.). Some new decoupled electrolysis and self-powered systems are also discussed in detail. Finally, the potential challenges and prospects of coupled water electrolysis systems are highlighted to aid future research directions.

Pt-Ru atomic alloys confined in mesoporous carbon hollow spheres for accelerating methanol oxidation

Active and durable electrocatalysts are essential for commercializing direct methanol fuel cells. However, Pt-based catalysts, extensively utilized in the methanol oxidation reaction (MOR), are suffered from resource scarcity and CO poisoning, which degrade MOR activity severely. Herein, Pt1Rux bimetallic catalysts were synthesized by confining Pt1Rux alloys within the shells of mesoporous carbon hollow spheres (MCHS) via a vacuum-assisted impregnation method (Pt1Rux@MCHS). The confinement effect induced by mesoporous carbon hollow spheres resulted in a robust structure of Pt1Ru3@MCHS with an ultrafine dispersion of alloy nanoparticles. The experimental and theoretical results confirmed that the boosting electrocatalytic activity and stability of the MOR over Pt1Ru3@MCHS were contributed to the regulated electronic structure as well as the superior CO tolerance of atomic Pt site caused by the electronic interaction between single Pt atoms and Ru nanoparticles. This strategy is versatile for the rational design of Pt-based bimetallic catalysts and has a positive impact on MOR performance.

Pt Nanoparticles on Multi-Walled Carbon Nanotubes with High CO Tolerance for Methanol Electrooxidation

Anode catalysts are important for direct methanol fuel cells (DMFCs) of energy conversion. Herein, we report a novel strategy by ethylene glycol-based deep eutectic solvents (EG-DESs) for the fabrication of a multi-walled carbon nanotubes (MWCNTs)-supported Pt nanoparticles catalyst (referred to as Pt/CNTs-EG-DES). The Pt/CNTs-EG-DES catalyst provides an increased electrochemically active surface area (ECSA) and shows remarkably improved electrocatalytic performance towards methanol oxidation reaction compared to Pt/CNTs-W (fabricated in water) and commercial Pt/C catalysts. The improved performance is attributed to the generation of more Pt-O bonds which change the electronic states of the Pt atoms and the special node structure that obtains more active sites for a high CO resistance. This study suggests an effective synthesis strategy for Pt-based electrocatalysts with high performance for DMFC applications.

The effect of carbonized zeolitic imidazolate framework-67 (ZIF-67) support on the reactivity and selectivity of bimetal-catalytic aqueous NO3- reduction

A metallic catalyst, Cobalt N-doped Carbon (Co@NC), was obtained from Zeolitic-Imidazolate Framework-67 (ZIF-67) for efficient aqueous nitrate (NO3-) removal. This advanced catalyst indicated remarkable efficiency by generating valuable ammonium (NH3/NH4+) via an environmentally friendly production technique during the nitrate treatment. Among various metals (Cu, Pt, Pd, Sn, Ru, and Ni), 3.6%Pt-Co@NC exhibited an exceptional nitrate removal, demonstrating a complete removal of 60 mg/L NO3--N (265 mg/L NO3-) in 30 min with the fastest removal kinetics (11.4 × 10-2 min-1) and 99.5% NH4+ selectivity. The synergistic effect of bimetallic Pt-Co@NC led to 100% aqueous NO3- removal, outperforming the reactivity by bare ZIF-67 (3.67%). The XPS analysis illustrated Co's promotor role for NO3- reduction to less oxidized nitrogen species and Pt's hydrogenation role for further reduction to NH4+. The durability test revealed a slight decrease in NO3- removal, which started from the third cycle (95%) and slowly proceeded to the sixth cycle (80.2%), while NH4+ selectivity exceeded 82% with no notable Co or Pt leaching throughout seven consecutive cycles. This research shed light on the significance of the impregnated Pt metal and Co exposed on the Co@NC surface for the catalytic nitrate treatment, leading to a sustainable approach for the effective removal of nitrate and economical NH4+ production.

PEDOT-embellished Ti3C2Tx nanosheet supported Pt-Pd bimetallic nanoparticles as efficient and stable methanol oxidation electrocatalysts

Exploiting high-efficiency and durable electrocatalysts toward the methanol oxidation reaction (MOR) is crucial for the advancement of direct methanol fuel cells (DMFCs). Herein, we demonstrate the loading of platinum-palladium bimetallic nanoparticles (Pt-Pd NPs) onto poly(3,4-ethylenedioxythiophene) (PEDOT)-embellished titanium carbide (Ti3C2Tx) nanosheets as the electrocatalyst (Ti3C2Tx/PEDOT/Pt-Pd) via a facile and rapid chemical reduction-assisted one-pot hydrothermal process. The structural and morphological analyses of Ti3C2Tx/PEDOT/Pt-Pd indicate that the three-dimensional (3D) hybrid structure formed between PEDOT and Ti3C2Tx provides a sizable active surface and more active sites, which enhances the homogeneous dispersion of the Pt-Pd NPs and facilitates mass transfer. The Schottky junctions formed between PEDOT and Pt-Pd NPs contribute to charge transfer. The electronic effects and synergistic interactions between the support and catalyst favor the electrocatalytic activity of the catalyst. The electrochemical test results reveal that the Ti3C2Tx/PEDOT/Pt-Pd catalyst has prominent electrocatalytic capability for the MOR. Compared with Ti3C2Tx/Pt-Pd and commercial Pt/C catalysts, the Ti3C2Tx/PEDOT/Pt-Pd catalyst has a larger electrochemical activity surface area (ECSA = 122 m2 g-1) and higher mass activity (MA = 1445.4 mA mg-1), as well as better CO tolerance and more reliable long-term durability (a peak current density retention of 71% after 5200 s).

Interfacial Engineering of Porous Pd/M (M = Au, Cu, Mn) Sponge-like Nanocrystals with a Clean Surface for Enhanced Alkaline Electrochemical Oxidation of Ethanol

The interfacial engineering of Pd-based alloys (i.e., PdM with distinct morphologies, compositions, and strain defects) is an efficient way for enhanced catalytic activity; however, it remains a grand challenge to fabricate such alloys in aqueous solutions without heating, organic solvents, and multiple reaction steps. Herein, we present a simple, aqueous-phase, one-step, and ultrafast approach for the interfacial engineering of surfactant-free porous PdM (M = Cu, Au, and Mn) nanocrystals with well-controlled spongy-like morphology and compositions. The electronic interaction in PdM nanocrystals and their effect on the alkaline electrochemical ethanol oxidation reaction (EOR) are investigated using XRD, XPS, and electrochemical tests. Notably, integrating M metals into Pd atoms results in upshifting the d-band center of Pd and subsequently modulating the EOR activity and stability substantially. The EOR mass activity (10.78 A/mgPd (6.93 A/mgPdCu)) of PdCu was 1.83, 3.09, 4.51, and 53.90 times higher than those of AuPd (5.90 A/mgPd (3.27 A/mgAuPd)), PdMn (3.48 A/mgPd (3.19 A/mgPdMn)), Pd (2.39 A/mgPd), and Pd/C (0.20 A/mgPd), respectively, besides substantial durability after 1000 cycles. This is due to the porous two-dimensional morphology, a low synergetic effect, higher interfacial interaction, and greater active surface area of PdCu, besides a high Cu content with more oxophilicity that facilitates activation/dissociation of H2O to generate -OH species needed for quick EOR electrocatalysis. The electrochemical impedance spectroscopy (EIS) reveals better electrolyte/electrode interfacial interaction and lower charge transfer resistance on PdCu. The EOR activity of PdCu porous sponge-like nanocrystals was superior to all previously reported Pd-based alloys for electrochemical EOR. This study indicates that binary Pd-based catalysts with less synergetic effect are preferred for boosting the EOR activity, which could help in manipulating the surface properties of Pd-based alloys to optimize EOR performance.

Enhancement of photoelectrocatalytic performance of copper cobaltate nanoflowers modified with 5,10,15,20-tetrakis(4-carboxylphenyl)porphyrin for methanol oxidation under light

With the continuously increasing global energy demand, there is an urgent requirement to find efficient methanol oxidation reaction (MOR) catalysts that can replace precious metals. In this work, we have elaborately integrated 5,10,15,20-tetrakis(4-carboxyphenyl) porphyrin (H₂TCPP) with copper cobaltate (CuCo₂O₄), which possesses efficient separation of photogenerated charges and increased active sites. The mass activity of H₂TCPP/CuCo₂O₄ (534.75 mA mg^-1) toward MOR is higher than that of pure CuCo₂O₄ (291.75 mA mg^-1) under light. In addition, H₂TCPP/CuCo₂O₄ can catalyze the oxidation of other alcohols, such as ethanol, ethanediol, isopropanol, and glycerol. This study demonstrates that it is feasible to enhance the MOR activity by the modification of bimetallic transition metal oxides with porphyrins.

Modification of multi-walled carbon nanotubes with platinum-osmium to develop stable catalysts for direct methanol fuel cells

In the study, a new bimetallic catalyst was synthesized for methanol oxidation using multi-walled carbon nanotube (MWCNT)-supported platinum-osmium (PtOs) nanoparticles (PtOs@MWCNT NPs). The morphological structures of the prepared NPs were examined using different techniques, such as scanning electron microscopy (SEM) and X-ray diffraction (XRD). The electrochemical characterization of the synthesized PtOs@MWCNT catalysts, such as chronoamperometry (CA), cyclic voltammetry (CV), scan rate (SR) analysis, cyclic catalytic test, and electrochemical surface area (ECSA) evaluation, were performed in an alkaline medium. From the results obtained, the size of the NPs was found to be 3.12 nm according to the Debye-Schrrer equation, and the MWCNTs were clearly observed by SEM imaging. After the characterization of the prepared nanomaterials, the PtOs@MWCNT catalysts were employed in the methanol oxidation reaction, and a high oxidation current value of 220.86 mA cm^-2 was observed. Besides, according to the CA results, the catalyst exhibited high stability for 4000 s, and it was seen that Os metal improved the catalytic activity of the main catalyst. These results show that the PtOs@MWCNT catalyst is highly stable and reusable, and provides high electrocatalytic activity in the methanol oxidation reaction. Moreover, the obtained catalyst gave ideal results in terms of CO tolerance and activity. These data show that the obtained catalyst will provide significant improvement and superior efficiency in fuel-cell applications.

Infrequent Cubane-Like Chromium Sulfide Cluster with σ-Donor Ligands with Efficient Electrocatalytic Property Toward Hydrogen Evolution Reaction

The exploitation of efficient and economical electrocatalysts for hydrogen evolution reaction (HER) is of exceeding interest in renewable clean-energy technologies. Herein, the facile solvothermal reaction of S and chromic acetate in ethylenediamine (en) achieved a novel organic hybrid chromium sulfide [Cr₄(μ₃-S)₄(en)₄(SH)₄]·0.25H₂O (1), which offers a new type of antiferromagnetic cubane-like chromium sulfide cluster with σ-donor en ligands. 1 was utilized in combination with Ni nanoparticles and porous Ni foam (NF) to fabricate a Ni/1/NF electrode as an efficient cathodic catalyst, indicating excellent electrocatalytic property toward HER.

Rational Design of NiZnx@CuO Nanoarray Architectures for Electrocatalytic Oxidation of Methanol

Methanol oxidation reaction (MOR) in anodes is one of the significant aspects of direct methanol fuel cells (DMFCs), which also plays a critical role in achieving a carbon-neutral economy. Designing and developing efficient, cost-effective, and durable non-Pt group metal-based methanol oxidation catalysts are highly desired, but a gap still remains. Herein, we report well-defined hierarchical NiZnx@CuO nanoarray architectures as active electrocatalysts for MOR, synthesized by combining thermal oxidation treatment and magnetron sputtering deposition through a brass mesh precursor. After systematically evaluating the electrocatalytic performance of NiZnx@CuO nanoarray catalysts with different preparation conditions, we found that the NiZn1000@CuO (thermally oxidized at 500 °C for 2 h, nominal thickness of the NiZn alloy film is 1000 nm) electrode delivers a high current density of 449.3 mA cm-2 at 0.8 V for MOR in alkaline media as well as excellent operation stability (92% retention after 12 h). These outstanding MOR performances can be attributed to the hierarchical well-defined structure that can not only render abundant active sites and a synergistic effect to enhance the electrocatalytic activity but also can effectively facilitate mass and electron transport. More importantly, we found that partial Zn atoms could leach from the NiZn alloy, resulting in rough surface nanorods, which would further increase the specific surface area. These results indicate that the NiZn1000@CuO nanoarray architecture could be a promising Pt group metal alternative as an efficient, cost-effective, and durable anode catalyst for DMFCs.

A high-performance Pt-based catalyst for the methanol oxidation reaction: effect of electrodeposition mode and cocatalyst on electrocatalytic activity

The influence of supporting material, cocatalyst, and electrodeposition mode on MOR activity.