Metal-organic framework-derived bird's nest-like capsules for phosphorous small molecules towards flame retardant polyurea composites

Interfacial coupling effects in two-dimensional ordered arrays for microwave attenuation

With the development of nanotechnology, nano-functional units of different dimensions, morphologies, and sizes exhibit the potential for efficient microwave absorption (MA) performance. However, the multi-unit coupling enhancement mechanism triggered by the alignment and orientation of nano-functional units has been neglected, hindering the further development of microwave absorbing materials (MAMs). In this paper, two typical ZIF-derived nanomaterials are self-assembled into two-dimensional ordered polyhedral superstructures by the simple ice template method. The nano-functional units exhibit distinctive dielectric-sensitive behaviors after self-assembling into two-dimensional ordered arrays. The modified 2D ordered polyhedral superstructures not only inherit the atomic-level doping and well-designed shell structure, but also further amplify the loss properties to realize the multi-scale modulated MA response. Satisfactory MA performance in C, X and Ku bands is finally achieved. In particular, the ultra-broadband microwave absorption bandwidth (EAB) of 6.41 GHz is realized at 1.82 mm thickness. Our work demonstrates the two-dimensional ordered array-induced multiscale polarization behavior, providing a direction to fully utilize the potential of wave-absorbing functional units.

CoFe Oxides-Coated 2D Black Phosphorus for Flame-Retardant Nanocoatings with Tunable Mechanical Strength and Efficient Elimination of Toxic Gases

2D black phosphorus (BP) degrades irreversibly into phosphate compounds under ambient conditions, which limits its application in a variety of fields. In this study, by coating amorphous ferric-cobalt oxides (CoFeO) on BP nanosheets, a multifunctional CoFeO@2D BP is successfully developed that effectively inhibited combustion and catalyzed CO oxidation to eliminate toxic gases. Strong affinity between transition-metal cations and BP allowed the uniform growth of amorphous ferric‒cobalt oxides on the BP surface, which effectively prevented the spontaneous degradation of 2D BP. By combining CoFeO@2D BP with gelatin and kosmotropic salts, the as-obtained nanocoatings are used for surface treatment of flammable polyurethane foam (PU). Kosmotropic ions induced strong hydrophobic interactions and bundling within the gelatin chains which significantly enhanced the mechanical performance of the PU. BP accelerates the carbonization of gelatin to inhibit the combustion of PU, and CoFe oxides, which act as true active centers to accelerate the oxidation of CO, effectively inhibiting the production of harmful gas. The release rate of CO decreases by 73% and the limiting oxygen index (LOI) increases from 17% to ≈32% during PU combustion. The developed novel 2D material opens the way for multifunctional coatings with integrated durability, flame retardancy, and high smoke suppression efficiency.

Joint Exfoliation of MXene by Dimensional Mismatched SiC/ZIF-67 Toward Multifunctional Flame Retardant Thermoplastic Polyurethane

The single-layer MXene fully demonstrates the advantages of 2D materials, especially catalytic, conductive, and mechanical properties. However, the high energy consumption and low efficiency faced by MXene in the divestiture process are still challenges that need to be solved urgently. In this article, dimension mismatch and collaborative stripping strategies are skillfully combined to easily realize the transformation from multi-layer MXene to single layer. In addition, the functionalized MXene@SiC@polyaniline (MXene@SiC@PANI) nano-hybrid materials are used as fillers to improve the thermal conductivity, flame retardant, and antibacterial properties of thermoplastic polyurethane (TPU). The surface temperature of TPU/MXene@SiC@PANI composites increased from 33.4 °C to 59.8 °C within 10 s. In addition, the antibacterial efficiency of TPU composites against Escherichia coli and Staphylococcus aureus is 69.6% and 88.9%, respectively. Compared with pure TPU, the peak heat release rate and total heat release are reduced by 71.4% and 34.6%, respectively. The flame-retardant mechanism of MXene hybrid materials is systematically discussed. It is worth noting that the introduction of PANI enhances the compatibility between the filler and the polymer, effectively maintaining the mechanical properties of the TPU itself. This work provides a convenient method for the multi-functional practical application of TPU.

Synthesis and Flame Retardant Behavior of Phosphorous- and Nitrogen-Containing Copolymer and Its Application in Polypropylene

In this study, a 4-(hydroxymethyl)-2,6,7-trioxa-1-phosphabicyclo[2.2.2]octane 1-oxide (PEPA)-functionalized acrylate monomer, PEPAA, is designed and utilized for the synthesis of macromolecular flame retardants poly(PEPAA-co-AM) with varying PEPAA/AM ratio through copolymerization with acrylamide (AM). The poly(PEPAA-co-AM) is then incorporated into polypropylene (PP) to prepare PP/poly(PEPAA-co-AM) composites. The flame retardant effect of poly(PEPAA-co-AM) on PP is investigated using cone calorimetric test (CCT), and compared with that of PEPAA homopolymer (P-PEPAA), AM homopolymer (PAM), and blends of P-PEPAA/PAM. The results demonstrate that, in comparison with P-PEPAA, PAM, and blends of P-PEPAA/PAM, the incorporation of poly(PEPAA-co-AM) significantly enhances the flame retardancy of PP. Notably, the best flame retardancy is achieved when the ratio of PEPAA/AM copolymerization in poly(PEPAA-co-AM) is 2/8. The morphology and composition of residual chars from combustion are analyzed using SEM-EDS while the residual graphitization degree is examined through Raman spectroscopy. Additionally, TG-FTIR-MS is utilized to investigate the pyrolysis products in gas phase during thermal decomposition of poly(PEPAA-co-AM). Based on these experimental results, a flame retardant mechanism for poly(PEPAA-co-AM) is proposed. The PP/poly(PEPAA-co-AM) composites not only retain the excellent processing properties of pure PP but also exhibit enhanced mechanical properties.

Urchin-like NiCo-based bimetallic hydroxide decorated with DOPO as highly hydrophobic flame retardant for remarkably reducing fire hazard of poly (L-lactic acid)

Designing high-performance flame retardants for poly (L-lactic acid) (PLA) materials and exploring a simple and scalable strategy have been hot topics in research. In this work, a novel and highly efficient flame retardant, that is, 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) decorated urchin-like NiCo-based bimetallic hydroxide (NiCo-BH@DOPO), was synthesized and incorporated into PLA to prepare PLA and NiCo-BH@DOPO (PLA/NiCo-BH@DOPO) composite. Benefiting from the DOPO organic modification, NiCo-BH@DOPO had superb hydrophobicity and presented excellent dispersion in the PLA matrix. When 20 wt% NiCo-BH@DOPO was added, the LOI value of PLA/NiCo-BH@DOPO composites reached 33.2 %, passed the V-0 level of UL-94 grade, and its maximum peak heat release rate (PHRR) and total heat release (THR) were reduced by 13.2 % and 17.3 %, respectively, compared with PLA/NiCo-BH composites. Furthermore, the residue of PLA/NiCo-BH@DOPO at 800 °C reached 19.8 wt% and the T10% (temperature at 10 % weight loss) increased by 33 °C. More importantly, the residual PLA/NiCo-BH@DOPO char exhibits a significantly reduced presence of large cracks compared to PLA/NiCo-BH, indicating a more compact formation of residual char. NiCo-BH@DOPO endowed PLA with outstanding flame retardancy, thermal stability and carbonization properties, which were owing to the multi-coordinating effect transition metal (NiCo-BH) catalyzed the char formation to form a char layer barrier and DOPO free radicals captured to inhibit the combustion reaction chain. This investigation provided a facile strategy for the novel multi-function NiCo-based bimetallic hydroxide flame retardant, expanding NiCo-BH potential applications in PLA.

Simultaneously Flame Retarding and Toughening of Epoxy Resin Composites Based on Two-Dimensional Polyhedral Oligomeric Silsesquioxane/Polyoxometalate Supramolecular Nanocrystals with Ultralow Loading

For industrial practical applications, it is difficult to simultaneously endow epoxy resin (EP) composites with superior flame retardancy, smoke suppression, toughness, and low-dielectric constants. Herein, unique polyhedral oligomeric silsesquioxane/polyoxometalate (POM(Mo)-POSS(ibu-Li)) nanosheets were synthesized via a simple one-pot method using laboratory-made lithium-containing hepta-isobutyl-POSS (ibu-Li-POSS) and the low-cost industrial chromogenic agent H3PMo12O40 as raw materials. The incorporation of 2 wt % POM(Mo)-POSS(ibu-Li) nanoflakes into EP significantly enhanced the compatibility between nanoadditives and the EP matrix. Compared with EP, the flexural and impact strengths increased by 36.2 and 78.2%, respectively. Therefore, POM(Mo)-POSS(ibu-Li) has significant advantages in enhancing the toughness of EP compared with existing flame retardants. The dielectric constant and loss were apparently reduced to meet the increasing requirements of EP-type electronic packaging materials and components. Notably, the synthesized POM(Mo)-POSS(ibu-Li) contained various flame-retardant and smoke-suppression elements such as P, Mo, and Si. The ultralow loading (2 wt %) of POM(Mo)-POSS(ibu-Li) significantly reduced the peak heat release rate, peak of smoke production rate, and CO production rate by 43.9, 40.6, and 65.8%, respectively. Meanwhile, the value of LOI increased directly from 24.0% for EP to 30.2% and passed the V-0 rating in the UL-94 test. However, incorporating 5 wt % POSS derivatives into EP alone to ensure that the prepared composites pass the V-0 rating of the UL-94 test has always been an extraordinarily difficult problem. Therefore, the dilemmas of poor dielectric properties, inherent flammability, and brittleness of EP were completely overcome through the successful application of POM(Mo)-POSS(ibu-Li) supramolecular nanosheets.

Preparation of a Polymeric Phosphoramide Flame-Retardant and Its Effect on the Flame-Retardant Properties of Epoxy Resin

The flammability of epoxy resins and knowing how to achieve curing are particularly important factors during use. A novel approach for enhancing the fire resistance and reducing the smoke emission of epoxy resin during the curing process is suggested, which involves the utilization of a three-source integrated polymerization intumescent flame-retardant. In this study, the synthesis of poly 4,4-diaminodiphenylsulfone spirocyclic pentaerythritol bisphosphonate (PCS) is achieved through using solution polymerization, utilizing 4,4'-diaminodiphenylsulfone (DDS) and spirocyclic pentaerythritol bisphosphorate disphosphoryl chloride (SPDPC) as initial components. Following that, the EP underwent the inclusion of PCS to examine its resistance to heat, its ability to prevent flames, its effectiveness in reducing smoke and its curing effect. Compared to the unmodified epoxy resin, the addition of PCS can not only cure the epoxy resin, but also decompose before the epoxy resin and has a good carbonization effect. With the addition of 7 wt.% PCS, the LOI value can achieve 31.2% and successfully pass the UL-94 test with a V-0 rating. Moreover, the cone calorimeter experiment demonstrated a noteworthy decline of 59.7% in the maximum heat release rate (pHRR), 63.7% in overall heat release (THR), and 42.3% in total smoke generation (TSP). Based on the examination of TG-FTIR and SEM findings, there is ample evidence to suggest that PCS, functioning as a phosphorus-nitrogen intumescent flame-retardant that combines three origins, has the potential to exhibit a favorable flame-retardant impact in both its gas and condensed phases.

Characterization and Flame-Retardant Properties of Cobalt-Coordinated Cyclic Phosphonitrile in Thermoplastic Polyurethane Composites

Halogen-free organophosphorus flame retardants have promising application prospects due to their excellent safety and environmental protection properties. A cobalt-coordinated cyclic phosphonitrile flame retardant (Co@CPA) was synthesized via a hydrothermal method using hexachlorocyclotriphosphonitrile (HCCP), 5-amino-tetrazolium (5-AT), and cobalt nitrate hexahydrate (Co(NO3)2∙6H2O) as starting materials. The structure was characterized using Fourier transform infrared (FTIR), nuclear magnetic resonance spectroscopy (1H-NMR), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). Thermoplastic polyurethane (TPU) composites were prepared by incorporating 10-(2,5-dihydroxyphenyl)-9,10-dihydro-9-oxa-10-phosphame-10-oxide (ODOPB), Co@CPA, and silicon dioxide (SiO2) via melt blending. The flame-retardant performance and thermal stability of the TPU composites were evaluated through limiting oxygen index (LOI), vertical combustion (UL-94), TG, and cone calorimetric (CCT) tests. SEM and Raman spectroscopy were used to analyze the surface morphology and structure of the residual carbon. A synergistic flame-retardant effect of ODOPB and Co@CPA was observed, with the most effective flame retardancy achieved at a TPU:ODOPB:Co@CPA:SiO2 ratio of 75:16:8:1. This composition exhibited an LOI value of 26.5% and achieved a V-0 rating in the UL-94 test. Furthermore, compared to pure TPU, the composite showed reductions in total heat release, CO production, and CO2 production by 6.6%, 39.4%, and 48.9%, respectively. Our research findings suggest that Co@CPA demonstrates outstanding performance, with potential for further expansion in application areas. Different metal-based cyclic phosphonitrile compounds are significant in enriching phosphorus-based fine chemicals.

Structure of Metal-Organic Frameworks Eco-Modulated by Acid-Base Balance toward Biobased Flame Retardant in Polyurea Composites

Biobased-functionalized metal-organic frameworks (Bio-FUN-MOFs) stand out from the crowd of candidates in the flame-retardant field due to their multipathway flame-retardant mechanisms and green synthesis processes. However, exploring and designing Bio-FUN-MOFs tend to counteract the problem of compromising the flame-retardant advantages of MOFs themselves, which inevitably results in a waste of resources. Herein, a strategy in which MOFs are ecologically regulated through acid-base balance is presented for controllable preparation of Bio-FUN-MOFs by two birds with one stone, i.e., higher flame-retardant element loading and retention of more MOF structures. Specifically, the buffer layer is created on the periphery of ZIF-67 by weak etching of biobased alkali arginine to resist the excessive etching of ZIF-67 by phytic acid when loading phosphorus source and to preserve the integrity of internal crystals as much as possible. As a proof of concept, ZIF-67 was almost completely etched out by phytic acid in the absence of arginine. The arginine and phytic acid-functionalized ZIF-67 with yolk@shell structure (ZIF@Arg-Co-PA) obtained by this strategy, as a biobased flame retardant, reduces fire hazards for polyurea composites. At only 5 wt % loading, ZIF@Arg-Co-PA imparted polyurea composites with a limiting oxygen index of 23.2%, and the peaks of heat release rate, total heat release, and total smoke production were reduced by 43.8, 32.3, and 34.3%, respectively, compared to neat polyurea. Additionally, the prepared polyurea composites have acceptable mechanical properties. This work will shed light on the advanced structural design of polymer composites with excellent fire safety, especially environmentally friendly and efficient biobased MOF flame retardants.

Hollow Superstructure In Situ Assembled by Single-Layer Janus Nanospheres toward Electromagnetic Shielding Flame-Retardant Polyurea Composites

A dodecahedral superstructure consisting of a single layer of Janus spheres containing ZIF-67 nanodots is prepared by in situ polymerization, with ZIF-67 and bio-based phytic acid (PA) as templates and dopants. It is used to improve the flame retardant, electromagnetic (EMI) shielding, and thermal conductivity properties of polyurea (PUA). By adding 5 wt% polyaniline@cobalt phytate-2.0 (PANI@Co-PA-2.0), the peak of heat release rate and the peak of smoke production rate are reduced by 54.9 and 59.9%, respectively. The peak of CO and CO2 production also decreased by 46.2 and 53.1%, respectively. A decrease in the absorption intensity of aliphatic and aromatic volatiles is also observed. The fire safety of PUA is greatly improved. In addition, PUA/PANI@Co-PA-2.0 exhibits an EMI shielding capability of 22.4 dB with the help of reduced graphene oxide, which confirms the possibility of PUA material application in the field of electromagnetic shielding. The 5 wt% filler increases the tensile strength of the PUA matrix to 6.3 MPa, and the composite material obtains good thermal conductivity. This work provides a viable method for the preparation of a flame-retardant, conductive, and electromagnetic refractory PUA substrate.

A Gas-Steamed Route to Mesoporous Open Metal-Organic Framework Cages Enhancing Flame Retardancy and Smoke Suppression of Polyurea

Up to now, metal-organic frameworks (MOFs) with open nanostructures have shown outstanding capabilities in trapping smoke particles compared to the original MOFs. However, only a few MOF-based strategies have been reported to synthesize hierarchical porous cages thus far, which are mainly restricted to environmentally unfriendly wet-chemical liquid methods. Herein, as a proof-of-concept, a gas-steamed metal-organic framework approach was designed to fabricate a series of cheeselike open cages with hierarchical porosity. Briefly, zeolitic imidazolate framework-67 (ZIF-67) and phytic acid were employed as precursor and etchant, respectively. Abandoning the conventional wet-chemical method, the coordination bond of ZIF-67 was cleaved by acidic steam, forming an open framework with a high specific surface area and a hierarchical porous structure. The universality of this method was also confirmed by the selection of different etchants. Impressively, they also show outstanding fume-toxic adsorption capability and labyrinth effects based on abundant and complex porous channels. At only 5 wt % loading, Co3O4@open ZIF-67 cage-2 (Co3O4@OZC-2) imparted polyurea (PUA) composites with a 21.2% limiting oxygen index, and the peak of heat release rate, total heat release, and total smoke production were reduced by around 37.5, 25.5, and 40.4%, respectively, compared to neat PUA. This work will shed light on the advanced structural design of polymer composites with high fire safety, especially smoke suppression performance, so as to obtain more feasible applications.

Synchronous preparation and modification of LDH hollow polyhedra by polydopamine: Synthesis and application

Layered double hydroxides (LDH) have irreplaceable advantages in the field of polymer flame retardancy, but their thermal stability and compatibility with matrix still need to be improved. In this paper, the bottom-up method is adopted, and the phosphorus series flame retardant triphenyl phosphate (TPP) was first encapsulated inside ZIF-67. On this basis, ZIF-67 was etched to produce LDH while modified by polydopamine (PDA) concomitantly. An organic coated polydopamine hollow cage lamellar LDH microstructure loaded with TPP was constructed, and its structure-performance relationship was verified. When 2 wt% TPP@LDH@Co-PDA was added to the epoxy resin, the LOI value of the composite was increased to 29.4 %, the peak heat release was reduced by 43.1 %, and the smoke release was significantly reduced. The unique microstructure endows epoxy composites with good flame retardancy, improves mechanical properties, and provides a new solution to the migration problem of phosphorous based flame retardants.