Enhanced performance of hybrid supercapacitors by the synergistic effect of Co(OH)2 nanosheets and NiMn layered hydroxides

Constructing a NiCoO/NiCoP Heterostructure with a Built-In Electric Field for High-Performance Supercapacitors

Constructing heterostructures is a powerful way to improve the performance of electrode materials for supercapacitors. Herein, a compact NiCoO2/NiCoP heterostructure (NiCoO/P) with a 3D porous network architecture was prepared via simple electrodeposition followed by an in situ phosphorization strategy. The strong built-in electric field at the heterointerface, coupled with the synergistic effects of NiCoO2 and NiCoP, could endow abundant active sites, improve the charge transmission and OH- absorption, and significantly enhancing electrochemical performance. Thanks to the unique 3D network structure and the synergy of the two components, the optimal NiCoO/P5 achieved a high specific charge (1265.6 C g-1) at 1.0 A g-1 and a stable cycling lifetime with 82.3% capacity retention after 5000 cycles. Moreover, the hybrid supercapacitor using NiCoO/P5 as a positive electrode delivered a satisfactory energy density of 54.9 Wh kg-1 at 800 W kg-1 and a desirable long-term cycling lifetime. This work provides a reference for designing and synthesizing well-defined electrode materials for the energy storage field.

Novel design of nickel cobalt boride nanosheets-decorated molybdenum disulfide hollow spheres as efficient battery-type materials of hybrid supercapacitors

Transition metal borides (TMBs) with high theoretical capacitances and excellent electronic properties have attracted much attention as a promising active material of supercapacitors (SCs). However, TMB nanoparticles are prone to conduct self-aggregation, which significantly deteriorates the electrochemical performance and structural stability. To address the severe self-aggregation in TMBs and improve the active material utilization, it is imperative to provide a conductive substrate that promotes the dispersion of TMB during growths. In this work, sheet-like nickel cobalt boride (NCB) was grown on molybdenum disulfide (MoS2) hollow spheres (H-MoS2) by using simple template growth and chemical reduction methods. The resultant NCB/H-MoS2-50 was observed with uniform NCB nanosheets structure on the surface of the H-MoS2 and stronger MB bonding. After optimizing the loading amount of H-MoS2, the optimal composite (NCB/H-MoS2-50) modified nickel foam (NF) exhibits a superior specific capacity (1302 C/g) than that of the NCB electrode (957 C/g) at 1 A/g. Excellent rate capability of 84.8% (1104 C/g at 40 A/g) is also achieved by the NCB/H-MoS2-50 electrode. The extraordinary electrochemical performance of NCB/H-MoS2-50 is credited to the unique nanosheet-covered hollow spheres structure for facilitating ion diffusion and versatile charge storage mechanisms from the pseudocapacitive behavior of H-MoS2 and the Faradaic redox behavior of NCB. Furthermore, a hybrid SC is assembled with NCB/H-MoS2-50 and activated carbon (AC) electrodes (NCB/H-MoS2-50//AC), which operates in a potential window up to 1.7 V and delivers a high energy density of 76.8 W h kg-1 at a power density of 850 W kg-1. A distinguished cycling stability of 93.2% over 20,000 cycles is also obtained for NCB/H-MoS2-50//AC. These findings disclose the significant potential of NCB/H-MoS2-50 as a highly performed battery-type material of SCs.

Investigating metal (M = Mn, Fe, and Ni)-doped Co(OH)2 nanofibers for electrocatalytic oxygen evolution and electrochemical biosensing performance

To achieve efficient and cost-effective electrochemical water splitting, highly active and affordable nanostructured catalysts are the key requirement. The current study presents the investigations of the efficacy of metal (Mn, Fe and Ni)-doped Co(OH)2 nanofibers towards oxygen evolution via water splitting. Notably, Ni-doped Co(OH)2 demonstrates superior OER performance in KOH electrolyte, surpassing standard IrO2 with a modest potential of 1.62 V at 10 mA cm-2. The remarkable activity is attributed to the nanofiber structure, facilitating faster conduction and offering readily available active sites. Ni-doped Co(OH)2 nanofibers displayed enduring stability even after 1000 cycles. This work underscores the importance of transition-metal based catalysts as effective electrocatalysts, providing the groundwork for the development of cutting-edge catalysts. Additionally, the electrochemical sensing capability towards ascorbic acid is evaluated, with Ni-doped Co(OH)2 showing the most promising response, characterized by the lowest LOD and LOQ values. These findings highlight the potential of Ni-doped Co(OH)2 nanofibers for upcoming diagnostic detection devices.

Imidazole-Intercalated Cobalt Hydroxide Enabling the Li+ Desolvation/Diffusion Reaction and Flame Retardant Catalytic Dynamics for Lithium Ion Batteries

Lithium-ion batteries have found extensive applications due to their high energy density and low self-discharge rates, spanning from compact consumer electronics to large-scale energy storage facilities. Despite their widespread use, challenges such as inherent capacity degradation and the potential for thermal runaway hinder sustainable development. In this study, we introduce a unique approach to synthesize anode materials for lithium-ion batteries, specifically imidazole-intercalated cobalt hydroxide. This innovative material significantly enhances the Li+ desolvation/diffusion reaction and flame-retardant dynamics through complexing and catalytic synergetic effects. The lithium-ion batteries incorporating these materials demonstrate exceptional performance, boasting an impressive capacity retention of 997.91 mAh g-1 after 500 cycles. This achievement can be attributed to the optimization of the solid electrolyte interphase (SEI) interface engineering, effectively mitigating anode degradation and minimizing electrolyte consumption. Experimental and theoretical calculations validate these improvements. Importantly, imidazole intercalated Co(OH)2 (MI-Co(OH)2) exhibits a remarkable catalytic effect on electrolyte carbonization and the conversion of CO to CO2. This dual action suppresses smoke and reduces toxicity significantly. The presented work introduces a novel approach to realizing high-performance and safe lithium-ion batteries, addressing key challenges in the pursuit of sustainable energy solutions.

High-mass-loading cobalt iron phosphide@nickel vanadium layered double hydroxide heterogeneous nanosheet arrays for hybrid supercapacitors

Designing multidimensional heterostructures on flexible substrates is an efficient approach to resolve the low energy density of supercapacitors. Herein, a three-dimensional (3D) porous cobalt iron phosphide (CoFeP)@nickel vanadium-layered double hydroxide (NiV-LDH) heterostructure has been prepared anchored on carbon cloth (CC) substrate. In this nanoarchitecture, NiV-LDH nanosheets are densely wrapped on the surface of CoFeP nanosheets, which forms a hierarchically porous framework with an enlarged surface area and accessible pore channels. Benefiting from the strong interaction and synergistic effect between CoFeP and NiV-LDH, the well-defined heterostructure can realize simultaneously rich redox active sites, rapid reaction dynamics, and good structural stability. Thus, the binder-free CoFeP@NiV-LDH electrode with a high mass loading of 6.47 mg cm-2 displays a significantly increased specific capacity of 903.1C g-1 (2.35C cm-2) at 1 A g-1 and enhanced rate capability when compared to pristine CoFeP and NiV-LDH. Additionally, the assembled hybrid supercapacitor (HSC) yields an energy density of 77.9 Wh kg-1/0.98 Wh cm-2 and excellent long-term stability. This research proposes a rational route for designing heterogeneous micro-/nanoarchitectures with commercial-level mass loading for the practical application of high-energy-density supercapacitors.

Incorporation of Photo- and Thermoresponsive N-Salicylidene Aniline Derivatives into Cobalt and Zinc Layered Hydroxides

In search of new multifunctional hybrid materials and in order to investigate the influence of chemical modification on the possible synergy between properties, the carboxylate and sulfonate derivatives of photo- and thermochromic N-salicylidene aniline were successfully inserted into Co(II)- and Zn(II)-based layered simple hydroxides, resulting in four novel hybrids: Co-N-Sali-COO, Co-N-Sali-SO3, Zn-N-Sali-COO, and Zn-N-Sali-SO3. All synthesized hybrids adopt a double organic layered configuration, which prevents the cis-trans photoisomerization ability of N-Sali-R molecules in the hybrids. However, the Zn hybrids exhibit fluorescence upon exposure to UV light due to the excited-state intramolecular proton transfer (ESIPT) mechanism. The thermally stimulated keto-enol tautomerization of N-salicylidene aniline in the hybrids was related with the changes in interlamellar spacings observed by temperature-dependent PXRD. This tautomerization process was prominently evident in the Co-N-Sali-SO3 hybrid (about 11% increase in d-spacing upon decreasing the temperature to -180 °C). Finally, the Co-N-Sali-R hybrids exhibit the typical magnetic behavior associated with Co(II)-based LSHs (ferrimagnetic ordering at TN = 6.8 and 7.7 K for Co-N-Sali-COO and Co-N-Sali-SO3, respectively). This work offers insights into isomerization in LSHs and the ESIPT mechanism's potential in new luminescent materials and prospects for designing new multifunctional materials.