A 3D stacked corrugated pore structure composed of CoNiO2 and polyaniline within the tracheids of wood-derived carbon for high-performance asymmetric supercapacitors

Surface-modified composites of metal-organic framework and wood-derived carbon for high-performance supercapacitors

The renewable nature, high carbon content, and unique hierarchical structure of wood-derived carbon make it an optimal self-supporting electrode for energy storage. However, the limitations in specific surface area and electrical conductivity defects pose challenges to achieving satisfactory charge storage in wood-derived carbon electrodes. Therefore, exploring diverse and effective surface strategies is crucial for enhancing the electrochemical energy storage performance. Herein, a decoration technique for enhancing aesthetic appeal involves applying a metal-organic framework (Ni/Co-MOF) containing nickel and cobalt onto the inner walls of wood tracheids. The sequential modification steps include carbonization, oxidation activation, and acid-etching. The Ni/NiO/CoO-CW-4 electrode, made by acid-etching carbonized wood (CW) doped with nickel, nickel oxide, and cobalt oxide for 4 h, has excellent surface area and pore size distribution, high graphitization degree, and exceptional conductivity. Furthermore, surface modification optimizes the surface chemistry and phase composition, resulting in a 0.8 mm thick Ni/NiO/CoO-CW-4 electrode with an exceptionally high areal capacitance of 16.76 F cm-2 at 5 mA cm-2. Meanwhile, the fabricated solid-state supercapacitor achieves an impressive energy density of 0.67 mWh cm-2 (8.38 mWh cm-3) at 2.5 mW cm-2 (31.25 mW cm-3), surpassing representative modified wood-based carbon electrodes by approximately 2-7 times. Additionally, the supercapacitor demonstrates exceptional stability, maintaining 96.21 % of capacitance even over 10,000 cycles. The parameters presented here demonstrate a significant improvement compared to those typically observed in most modified wood-derived carbon-based supercapacitors, effectively addressing common issues of low energy density and suboptimal cycling performance with wood carbon composites.

Enhancement of high-efficiency potassium ion hybrid supercapacitors utilizing oxygen-deficient Co2NiO4@nitrogen-doped carbon nanoflower

Transition metal oxides represent a promising category of pseudocapacitive materials for potassium-ion hybrid supercapacitors (PIHCs) characterized by high energy density. Nevertheless, their utility is hindered by intrinsic low conductivity, restricted electrochemical sites, and notable volume expansion, all of which directly contribute to the degradation of their electrochemical performance, thereby limiting their practical applicability in supercapacitor systems. In this study, we present a facile synthesis approach to fabricate nitrogen-doped carbon-supported oxygen vacancy-rich Co2NiO4 nanoflowers (Ov-Co2NiO4/NC NFs) featuring tunable surface layering and electron distribution. The nanoflower structure augments the contact area between the material and the electrolyte. Density functional theory (DFT) calculations reveal oxygen vacancies could bring an enhanced charge density across the entire Fermi level in Co2NiO4 and expand the interatomic distances between adjacent cobalt and nickel atoms to 3.370 Å. N-doped carbon carriers further accelerate charge transfer, increase the electrostatic energy storage and inhibit the structural collapse of Co2NiO4. These structural modifications serve to improve electrochemical reaction kinetics, augment the binding energy of K+ (-2.87 eV), and mitigate structural variations during K+ storage. In a 6 M KOH electrolyte, Ov-Co2NiO4/NC NF exhibits a specific capacitance of 1104 F g-1 at a current density of 0.5 A g-1, with a remarkable capacitance retention rate of 91.48 % after 6500 cycles. Furthermore, the assembled PIHCs demonstrate an energy density of 47.8 Wh kg-1 and an ultra-high power density of 376 W kg-1, alongside notable cycle stability, retaining 90.13 % of its capacitance after 8000 cycles in a 6 M KOH electrolyte.

Novel design of nickel cobalt boride nanosheets-decorated molybdenum disulfide hollow spheres as efficient battery-type materials of hybrid supercapacitors

Transition metal borides (TMBs) with high theoretical capacitances and excellent electronic properties have attracted much attention as a promising active material of supercapacitors (SCs). However, TMB nanoparticles are prone to conduct self-aggregation, which significantly deteriorates the electrochemical performance and structural stability. To address the severe self-aggregation in TMBs and improve the active material utilization, it is imperative to provide a conductive substrate that promotes the dispersion of TMB during growths. In this work, sheet-like nickel cobalt boride (NCB) was grown on molybdenum disulfide (MoS2) hollow spheres (H-MoS2) by using simple template growth and chemical reduction methods. The resultant NCB/H-MoS2-50 was observed with uniform NCB nanosheets structure on the surface of the H-MoS2 and stronger MB bonding. After optimizing the loading amount of H-MoS2, the optimal composite (NCB/H-MoS2-50) modified nickel foam (NF) exhibits a superior specific capacity (1302 C/g) than that of the NCB electrode (957 C/g) at 1 A/g. Excellent rate capability of 84.8% (1104 C/g at 40 A/g) is also achieved by the NCB/H-MoS2-50 electrode. The extraordinary electrochemical performance of NCB/H-MoS2-50 is credited to the unique nanosheet-covered hollow spheres structure for facilitating ion diffusion and versatile charge storage mechanisms from the pseudocapacitive behavior of H-MoS2 and the Faradaic redox behavior of NCB. Furthermore, a hybrid SC is assembled with NCB/H-MoS2-50 and activated carbon (AC) electrodes (NCB/H-MoS2-50//AC), which operates in a potential window up to 1.7 V and delivers a high energy density of 76.8 W h kg-1 at a power density of 850 W kg-1. A distinguished cycling stability of 93.2% over 20,000 cycles is also obtained for NCB/H-MoS2-50//AC. These findings disclose the significant potential of NCB/H-MoS2-50 as a highly performed battery-type material of SCs.

Self-supported porous wood carbon electrode with a MoC/carbon nanocage composite for application in a high-performance supercapacitor

The rational design and synthesis of carbon nanocages with highly complex porous structures are continuously facing challenges in the development of high-performance supercapacitors (SCs). The electrochemical performance characteristics of electrodes rely on their compositions and fabrication methods. Here, we propose a universal and efficient approach for the in-situ synthesis of zeolitic imidazolate framework-8 (ZIF-8) on porous carbonized wood, where the selective utilization of hexacarbonyl molybdenum protects the structural integrity of the ZIF-8 precursor, preventing collapse during thermal treatment. The subsequent pyrolysis process leads to the formation of small-sized molybdenum carbide (MoC) which are embedded in carbon nanocages (CN). The composite electrode consists of MoC/CN embedded in a porous carbonized wood (PCW), and it shows area-specific capacity of 9.7F cm-2 and 9.4 F cm-2 at 5 mA cm-2 and 30 mA cm-2, respectively. Subsequently, the symmetric supercapacitor, with two MoC/CN@PCW electrodes exhibits a areal specific capacitance of 2.7 F cm-2 at 5 mA cm-2. Moreover, this supercapacitor maintains an capacitance retention rate of 98.5 % after 12,000 discharge cycles. The supercapacitor exhibits a power density of 6.5 mW cm-2, resulting in an energy density of 0.864 mWh cm-2. Therefore, the utilization of wood-based electrodes holds promise for energy storage systems.

Bimetal-organic frameworks derived redox-type composite materials for high-performance energy storage

Electrodes and electroactive materials are crucial components in the development of supercapacitors due to their geometric properties. In this study, bimetal-organic frameworks (Bi-MOFs, ZIF-8@ZIF-67) were utilized as electrode materials for a high-performance hybrid supercapacitor (HSC) by designing a novel synthesis of metallic carbonate hydroxide/oxides. In particular, the Bi-MOFs function as a sacrificial precursor in the synthesis of hollow NiMn(CO3)0.5·0·.11H2O/ZnO@Co3O4 CNCs (NM-CH/ZnO@Co3O4 CNCs) cubic composite materials by a straightforward low-temperature treatment. The NM-CH/ZnO@Co3O4 CNCs exhibited exceptional electrochemical performance with high specific capacity of 196.3 ± 0.08 mAh/g, specific capacitance of 1179 ± 0.10 F g-1 at 0.5 A g-1, and outstanding cycling stability of 98% after 25,000 cycles compared to the other electrode materials. The porous and hollow structure, along with a large surface area, contributed to the enhanced electrochemical properties of the composite material. An HSC was constructed using NM-CH/ZnO@Co3O4 CNCs as the cathode and activated porous carbon (APC) as the anode, resulting in a device with a specific energy of 33 ± 0.12 Wh kg-1 and a power density of 19354 ± 0.07 W kg-1. The use of Bi-MOF electrodes presents new avenues for the development of high-performance energy storage materials, with the potential for industrial energy storage application demonstrated though the successful powering of portable lightbulbs.

Construction of wood-PANI supercapacitor with high mass loading using "pore-making, active substance-filling, densification" strategy

Wood-conducting polymer materials have been widely used as supercapacitor electrode; however, it remains challenging to achieve a simple method to improve the homogeneity of the conductive material on wood and to reach high mass loading. Herein, a novel "pore-making, active substance-filling, densification (dissolution, in-situ polymerization of polyaniline (PANI), self-shrinking)" strategy is proposed for the preparation of wood electrodes with a high mass loading (41.4 wt%) and homogeneity. Ingeniously, ZnCl2 as a dissolving agent and pore-making agent to treat delignified wood can generate more pores on the wood, which is more conducive to the penetration of aniline small molecules, besides, the dissolved fine fibers can be entangled with more PANI, which can improve the loading and homogeneity of PANI. After drying treatment, there will be shrinkage again, playing a certain physical densification effect on the large lumen. The optical electrode was RWP2 showing high electrochemical performance (2328.9 mF/cm2, 1 mA/cm2), and stability (5000 cycles, 89.3 %). Moving forward, the RWP2//RWP2 SSC showed an excellent energy density of 164.24 μwh/cm2 at a power density of 250 μw/cm2. Remarkably, the simple and versatile strategy of designing wood-based materials with high mass loading provides new research ideas for realizing multifunctional applications.