Nitrogen-doped graphene quantum dots embedding CuCo-LDH hierarchical hollow structure for boosted charge storage capability in supercapacitor

Enhanced charge storage in supercapacitors using carbon nanotubes and N-doped graphene quantum dots-modified (NiMn)Co2O4

The integration of ternary metal oxides into carbon materials is anticipated to significantly boost the electrochemical performance of supercapacitor electrodes. This article synthesized carbon nanotubes (CNT)/(NiMn)Co2O4 composite materials using a straightforward hydrothermal method and subsequently prepared composite thin films of CNT/P-(NiMn)Co2O4@NGQD by phosphating and incorporating nitrogen-doped graphene quantum dots (NGQD). These films served as the functional electrode material for supercapacitors, enhancing their performance capabilities. The specific capacity of CNT/P-(NiMn)Co2O4@NGQD was measured at 2172.0 F g-1 at a current density of 1 A g-1, maintaining a capacitance of 1954.0 F g-1 at 10 A g-1, thus demonstrating excellent rate performance. Electrochemical impedance spectroscopy (EIS) further revealed enhancements in electrolyte flow dynamics and capacitance behavior post-NGQD introduction. The energy density of the composite material reached 94.4 Wh kg-1 at power density of 800 W kg-1, demonstrating superior electrochemical performance. The enhancement in these electrochemical properties is attributed to the high specific surface area and active sites of CNT/P-(NiMn)Co2O4@NGQD films, along with the synergistic effects of NGQD and metal ions facilitating rapid electrons and charge transfer. This work provides new insights into developing high-performance supercapacitors.

Constructing nitrogen-doped graphene quantum dots embedded in CNT supported layered (Ni0.5Co0.5)3V2O8 self-supporting film for high-performance supercapacitor

To improve the electrochemical performance of positive electrode materials, constructing graded nanostructures is a worthwhile approach. This study successfully synthesized nitrogen-doped graphene quantum dots (NGQD) modified (Ni0.5Co0.5)3V2O8 on a carbon nanotube (CNT) substrate to construct self-supporting electrodes for high-performance supercapacitors. The (Ni0.5Co0.5)3V2O8 nanosheets were successfully wrapped onto the CNT surface through a solution impregnation process, which increased the specific surface area and interlayer spacing of the material. Furthermore, the electrochemical properties of the electrode material underwent significant enhancement due to the synergistic interplay between metal ions and the numerous redox centers. The embedding of the NGQD enriched the materials with active sites and further improved its specific capacity without compromising the structure intergrity of the layer configuration. Using CNT as the substrate ensured the self-supporting nature of the electrode. Consequently, the (Ni0.5Co0.5)3V2O8/NGQD@CNT composite exhibits an ultra-high specific capacitance of 3018.2 F g-1 at 1 A g-1 and 2332 F g-1 at 10 A g-1. The asymmetric supercapacitor constructed with (Ni0.5Co0.5)3V2O8/NGQD@CNT and activated carbon (AC) presented an impressive energy density of 160.2 Wh kg-1 at a power density of 800 W kg-1. After 8000 charge-discharge cycles, the capacity retention rate was 78.5 %, with a Coulo mbic efficiency consistently above 98 %.

Stepwise Construction of MoS2@CoAl-LDH/NF 3D Core-Shell Nanoarrays with High Hole Mobility for High-Performance Asymmetric Supercapacitors

Supercapacitors (SCs) have received widespread attention as excellent energy storage devices, and the design of multicomponent electrode materials and the construction of ingenious structures are the keys to enhancing the performance of SCs. In this paper, MoS2 nanorods were used as the carrier structure to induce the anchoring of CoAl-LDH nanosheets and grow on the surface of nickel foam (NF) in situ, thus obtaining a uniformly distributed MoS2 nanorod@CoAl-LDH nanosheet core-shell nanoarray material (MoS2@CoAl-LDH/NF). On the one hand, the nanorod-structured MoS2 as the core provides high conductivity and support, accelerates electron transfer, and avoids agglomeration of CoAl-LDH nanosheets. On the other hand, CoAl-LDH nanosheet arrays have abundant interfacially active sites, which accelerate the electrolyte penetration and enhance the electrochemical activity. The synergistic effect of the two components and the unique core-shell nanostructure give MoS2@CoAl-LDH/NF a high capacity (14,888.8 mF cm-2 at 2 mA cm-2) and long-term cycling performance (104.4% retention after 5000 charge/discharge cycles). The integrated MoS2@CoAl-LDH/NF//AC device boasts a voltage range spanning from 0 to 1.5 V, achieving a peak energy density of 0.19 mW h cm-2 at 1.5 mW cm-2. Impressively, it maintains a capacitance retention rate of 84.6% after enduring 10,000 cycles, demonstrating exceptional durability and stability.

Construction of porous flower-like Ru-doped CoNiFe layered double hydroxide for supercapacitors and oxygen evolution reaction catalysts

In recent years, ternary layered double hydroxide (LDH) has become a research hotspot for electrode materials and oxygen evolution reaction (OER) catalyst due to the enhanced synergistic effect between individual elements. However, the application of LDH is greatly limited by its low electrical conductivity and the disadvantage that nanosheets tend to accumulate and mask the active sites. Herein, a novel Ru-doped CoNiFe - LDH was prepared via a facile hydrothermal method. According to the density functional theory (DFT) calculations, the doping of Ru element could improve electron state density and band gaps of LDH and consequently boosted the electrochemical reaction kinetics as well as electrical conductivity. Furthermore, introduction of Ru atom induced the formation of porous flower-like structures in nanosheets. Compared to CoNiFe - LDH (28.9 m2/g), Ru-doped CoNiFe - LDH performed larger specific surface area of 53.1 m2/g, resulting in more electrochemically active sites. In these case, Ru-doped CoNiFe - LDH demonstrated better energy storage performance of 176.0 mAh/g at 1 A/g compared to original CoNiFe - LDH (78.9 mAh/g at 1 A/g). Besides, the assembled Ru-doped CoNiFe - LDH//activated carbon (AC) device delivered a maximum energy density of 36.4 W h kg-1 at the power density of 740.3 W kg-1 and an outstanding cycle life (78.7 % after 10,000 cycles). Meanwhile, Ru-doped CoNiFe - LDH exhibited lower overpotential (339 mV at 50 mA cm-2) and Tafel slope (93.2 mV dec-1). Therefore, this work provided novel and valuable insights into the rational doping of Ru elements for the controlled synthesis of supercapacitor electrode materials and OER catalysts.

High-mass-loading cobalt iron phosphide@nickel vanadium layered double hydroxide heterogeneous nanosheet arrays for hybrid supercapacitors

Designing multidimensional heterostructures on flexible substrates is an efficient approach to resolve the low energy density of supercapacitors. Herein, a three-dimensional (3D) porous cobalt iron phosphide (CoFeP)@nickel vanadium-layered double hydroxide (NiV-LDH) heterostructure has been prepared anchored on carbon cloth (CC) substrate. In this nanoarchitecture, NiV-LDH nanosheets are densely wrapped on the surface of CoFeP nanosheets, which forms a hierarchically porous framework with an enlarged surface area and accessible pore channels. Benefiting from the strong interaction and synergistic effect between CoFeP and NiV-LDH, the well-defined heterostructure can realize simultaneously rich redox active sites, rapid reaction dynamics, and good structural stability. Thus, the binder-free CoFeP@NiV-LDH electrode with a high mass loading of 6.47 mg cm-2 displays a significantly increased specific capacity of 903.1C g-1 (2.35C cm-2) at 1 A g-1 and enhanced rate capability when compared to pristine CoFeP and NiV-LDH. Additionally, the assembled hybrid supercapacitor (HSC) yields an energy density of 77.9 Wh kg-1/0.98 Wh cm-2 and excellent long-term stability. This research proposes a rational route for designing heterogeneous micro-/nanoarchitectures with commercial-level mass loading for the practical application of high-energy-density supercapacitors.

Controlled preparation of cobalt carbonate hydroxide@nickel aluminum layered double hydroxide core-shell heterostructure for advanced supercapacitors

Herein, we report the rational fabrication of unique core-shell nanoclusters composed of cobalt carbonate hydroxide (Co-CH) @ nickel aluminum layered double hydroxide (NiAl-LDH) on a carbon cloth (CC) substrate using a two-step hydrothermal strategy. The one-dimensional (1D) Co-CH nanowires core-shell functions as a framework for the growth of two-dimensional (2D) NiAl-LDH nanosheets, leading to the formation of a hierarchically porous core-shell heterostructure. The presence of abundant heterointerfaces enhances electrical conductivity, reduces charge transfer resistance, and facilitates ion/electron transfer. Taking full advantage of its unique nanostructure and synergistic effect of two components, the as-prepared Co-CH@NiAl-LDH hybrid material illustrates a specific capacity of 1029.4 C/g (2058.9 mC cm-2) at 1 A g-1 and good rate capability with a capacity retention of 68.5% at 20 A g-1. Additionally, the assembled Co-CH@NiAl-LDH//pine pollen-derived porous carbon (PPC) hybrid supercapacitor (HSC) delivers impressive energy and power densities of 66.2 Wh kg-1 (0.27 Wh cm-2) and 17529.7 Wh kg-1 (0.11 Wh cm-2), respectively. This device also achieves a superior capacity retention of 80.3% over 20,000 cycles. These findings prove the importance of engineering heterointerfaces in heterostructure for the promotion of energy storage performance.