3D culture of bone-derived cells immobilised in alginate following light-triggered gelation

Alginate Hydrogels with Tuneable Properties

Alginate is a material that has many biomedical applications due to its low toxicity and a variety of favourable physical properties. In particular, the ease in which hydrogels are formed from alginate and the variety of mechanical behaviours that can be imparted on the hydrogels, by understanding alginate chemistry and intuitive design, has made alginate the most widely investigated polysaccharide used for tissue engineering. This chapter provides an overview of alginate, from how the source and natural variations in composition can influence mechanical properties of alginate hydrogels, through to some innovative techniques used to modify and functionalise the hydrogels designed specifically for cell-based therapies. The main focus is on how these strategies of understanding and controlling the chemistry of alginates have resulted in the development of hydrogels that can be tuned to deliver the physical behaviours required for successful application. This will also highlight how research on the physicochemical properties has helped alginate evolve from a structural polysaccharide in brown seaweed into a highly tuneable, multifunctional, smart biomaterial, which is likely to find further biomedical applications in the future.

Soft-Nanoparticle Functionalization of Natural Hydrogels for Tissue Engineering Applications

Tissue engineering has emerged as an important research area that provides numerous research tools for the fabrication of biologically functional constructs that can be used in drug discovery, disease modeling, and the treatment of diseased or injured organs. From a materials point of view, scaffolds have become an important part of tissue engineering activities and are usually used to form an environment supporting cellular growth, differentiation, and maturation. Among various materials used as scaffolds, hydrogels based on natural polymers are considered one of the most suitable groups of materials for creating tissue engineering scaffolds. Natural hydrogels, however, do not always provide the physicochemical and biological characteristics and properties required for optimal cell growth. This review discusses the properties and tissue engineering applications of widely used natural hydrogels. In addition, methods of modulation of their physicochemical and biological properties using soft nanoparticles as fillers or reinforcing agents are presented.

Polysaccharide matrices used in 3D in vitro cell culture systems

Polysaccharides comprise a diverse class of polymeric materials with a history of proven biocompatibility and continual use as biomaterials. Recent focus on new matrices appropriate for three-dimensional (3D) cell culture offers new opportunities to apply polysaccharides as extracellular matrix mimics. However, chemical and structural bases for specific cell-polysaccharide interactions essential for their utility as 3-D cell matrices are not well defined. This review describes how these naturally sourced biomaterials satisfy several key properties for current 3D cell culture needs and can also be synthetically modified or blended with additional components to tailor their cell engagement properties. Beyond their benign interactions with many cell types in cultures, their economical and high quality sourcing, optical clarity for ex situ analytical interrogation and in situ gelation represent important properties of these polymers for 3D cell culture applications. Continued diversification of their versatile glycan chemistry, new bio-synthetic sourcing strategies and elucidation of new cell-specific properties are attractive to expand the polysaccharide polymer utility for cell culture needs. Many 3D cell culture priorities are addressed with the portfolio of polysaccharide materials available and under development. This review provides a critical analysis of their properties, capabilities and challenges in 3D cell culture applications.

Dental Pulp Cell Behavior in Biomimetic Environments

There is emerging recognition of the importance of a physiologically relevant in vitro cell culture environment to promote maintenance of stem cells for tissue engineering and regenerative medicine purposes. In vivo, appropriate cellular cues are provided by local tissue extracellular matrix (ECM), and these are not currently recapitulated well in vitro using traditional cultureware. We therefore hypothesized that better replication of the in vivo environment for cell culture and differentiation could be achieved by culturing dental pulp cells with their associated ECM. Primary dental pulp cells were subsequently seeded onto pulp-derived ECM-coated cultureware. While at up to 24 h they exhibited the same level of adherence as those cells seeded on tissue culture–treated surfaces, by 4 d cell numbers and proliferation rates were significantly decreased in cells grown on pulp ECM compared with controls. Analysis of stem cell and differentiation marker transcripts, as well as Oct 3/4 protein distribution, supported the hypothesis that cells cultured on ECM better maintained a stem cell phenotype compared with those cultured on standard tissue culture–treated surfaces. Subsequent differentiation analysis of cells cultured on ECM demonstrated that they exhibited enhanced mineralization, as determined by alizarin red staining and mineralized marker expression. Supplementation of a 3% alginate hydrogel with pulp ECM components and dental pulp cells followed by differentiation induction in mineralization medium resulted in a time-dependent mineral deposition at the periphery of the construct, as demonstrated histologically and using micro–computed tomography analysis, which was reminiscent of tooth structure. In conclusion, data indicate that culture of pulp cells in the presence of ECM better replicates the in vivo environment, maintaining a stem cell phenotype suitable for downstream tissue engineering applications.

Rheological characterization of an injectable alginate gel system

Background

This work investigates a general method for producing alginate gel matrices using an internal mode of gelation that depends solely on soluble alginate and alginate/gelling ion particles. The method involves the formulation of two-component kits comprised of soluble alginate and insoluble alginate/gelling ion particles. Gelling kinetics, elastic and Young’s moduli were investigated for selected parameters with regard to soluble alginate guluronate content, molecular weight, calcium or strontium gelling ions and alginate gelling ion particle sizes in the range between 25 and 125 micrometers.

Results

By mixing the two components and varying the parameters mentioned above, alginate gel matrices with tailor-made viscoelastic properties and gelling kinetics were obtained. Final gel elasticity depended on alginate type, concentration and gelling ion. The gelling rate could be manipulated, e.g. through selection of the alginate type and molecular weight, particle sizes and the concentration of non-gelling ions.

Conclusions

Formulations of the injectable and moldable alginate system presented have recently been used within specific medical applications and may have potential within regenerative medicine or other fields.

Bio-Encapsulation for the Immune-Protection of Therapeutic Cells

The design of new technologies for treatment of human disorders is a complex and difficult task. The aim of this article is to explore state of art discussion of various techniques and materials involve in cell encapsulations. Encapsulation of cells within semi-permeable polymer shells or beads is a potentially powerful tool, and has long been explored as a promising approach for the treatment of several human diseases such as lysosomal storage disease (LSD), neurological disorders, Parkinsons disease, dwarfism, hemophilia, cancer and diabetes using immune-isolation gene therapy.

Investigation of potential injectable polymeric biomaterials for bone regeneration

This article reviews the potential injectable polymeric biomaterial scaffolds currently being investigated for application in bone tissue regeneration. Two types of injectable biomaterial scaffolds are focused in this review, including injectable microspheres and injectable gels. The injectable microspheres section covers several polymeric materials, including poly(L-lactide-co-glycolide)-PLGA, poly(propylene fumarate), and chitosan. The injectable gel section covers alginate gels, hyaluronan hydrogels, poly(ethylene-glycol)-PEG hydrogels, and PEG-PLGA copolymer hydrogels. This review focuses on the effect of cellular behavior in vitro and in vivo in terms of material properties of polymers, such as biodegradation, biocompatibility, porosity, microsphere size, and cross-linking nature. Injectable polymeric biomaterials offer a major advantage for orthopedic applications by allowing the ability to use noninvasive or minimally invasive treatment methods. Therefore, combining injectable polymeric biomaterial scaffolds with cells have a significant potential to treat orthopedic bone defects, including spine fusion, and craniofacial and periodontal defects.

Encapsulation and culture of mammalian cells including corneal cells in alginate hydrogels

The potential of cell therapy for the regeneration of diseased and damaged tissues is now widely -recognized. As a consequence there is a demand for the development of novel systems that can deliver cells to a particular location, maintaining viability, and then degrade at a predictable rate to release the cells into the surrounding tissues. Hydrogels have attracted much attention in this area, as the hydrogel structure provides an environment that is akin to that of the extracellular matrix. One widely investigated hydrogel is alginate, which has been used for cell encapsulation for more than 30 years. Alginate gels have the potential to be used as 3D cell culture systems and as prosthetic materials, both are applied to regeneration of the cornea. Here, we describe an alginate-based process that has been used for encapsulation of mammalian cells including corneal cells, with high levels of viability, and which allows subsequent retrieval of cell cultures for further characterization.

Photochemical mechanisms of light-triggered release from nanocarriers

Over the last three decades, a handful of photochemical mechanisms have been applied to a large number of nanoscale assemblies that encapsulate a payload to afford spatio-temporal and remote control over activity of the encapsulated payload. Many of these systems are designed with an eye towards biomedical applications, as spatio-temporal and remote control of bioactivity would advance research and clinical practice. This review covers five underlying photochemical mechanisms that govern the activity of the majority of photoresponsive nanocarriers: 1. photo driven isomerization and oxidation, 2. surface plasmon absorption and photothermal effects, 3. photo driven hydrophobicity changes, 4. photo driven polymer backbone fragmentation and 5. photo driven de-crosslinking. The ways in which these mechanisms have been incorporated into nanocarriers and how they affect release are detailed, as well as the advantages and disadvantages of each system.

The use of micro- and nanospheres as functional components for bone tissue regeneration

During the last decade, the use of micro- and nanospheres as functional components for bone tissue regeneration has drawn increasing interest. Scaffolds comprising micro- and nanospheres display several advantages compared with traditional monolithic scaffolds that are related to (i) an improved control over sustained delivery of therapeutic agents, signaling biomolecules and even pluripotent stem cells, (ii) the introduction of spheres as stimulus-sensitive delivery vehicles for triggered release, (iii) the use of spheres to introduce porosity and/or improve the mechanical properties of bulk scaffolds by acting as porogen or reinforcement phase, (iv) the use of spheres as compartmentalized microreactors for dedicated biochemical processes, (v) the use of spheres as cell delivery vehicle, and, finally, (vi) the possibility of preparing injectable and/or moldable formulations to be applied by using minimally invasive surgery. This article focuses on recent developments with regard to the use of micro- and nanospheres for bone regeneration by categorizing micro-/nanospheres by material class (polymers, ceramics, and composites) as well as summarizing the main strategies that employ these spheres to improve the functionality of scaffolds for bone tissue engineering.

Cell encapsulation in biodegradable hydrogels for tissue engineering applications

Encapsulating cells in biodegradable hydrogels offers numerous attractive features for tissue engineering, including ease of handling, a highly hydrated tissue-like environment for cell and tissue growth, and the ability to form in vivo. Many properties important to the design of a hydrogel scaffold, such as swelling, mechanical properties, degradation, and diffusion, are closely linked to the crosslinked structure of the hydrogel, which is controlled through a variety of different processing conditions. Degradation may be tuned by incorporating hydrolytically or enzymatically labile segments into the hydrogel or by using natural biopolymers that are susceptible to enzymatic degradation. Because cells are present during the gelation process, the number of suitable chemistries and formulations are limited. In this review, we describe important considerations for designing biodegradable hydrogels for cell encapsulation and highlight recent advances in material design and their applications in tissue engineering.

Localized delivery of growth factors for periodontal tissue regeneration: role, strategies, and perspectives

Difficulties associated with achieving predictable periodontal regeneration, means that novel techniques need to be developed in order to regenerate the extensive soft and hard tissue destruction that results from periodontitis. Localized delivery of growth factors to the periodontium is an emerging and versatile therapeutic approach, with the potential to become a powerful tool in future regenerative periodontal therapy. Optimized delivery regimes and well-defined release kinetics appear to be logical prerequisites for safe and efficacious clinical application of growth factors and to avoid unwanted side effects and toxicity. While adequate concentrations of growth factor(s) need to be appropriately localized, delivery vehicles are also expected to possess properties such as protein protection, precision in controlled release, biocompatibility and biodegradability, self-regulated therapeutic activity, potential for multiple delivery, and good cell/tissue penetration. Here, current knowledge, recent advances, and future possibilities of growth factor delivery strategies are outlined for periodontal regeneration. First, the role of those growth factors that have been implicated in the periodontal healing/regeneration process, general requirements for their delivery, and the different material types available are described. A detailed discussion follows of current strategies for the selection of devices for localized growth factor delivery, with particular emphasis placed upon their advantages and disadvantages and future prospects for ongoing studies in reconstructing the tooth supporting apparatus.

FUNCTIONALIZED, SWELLABLE HYDROGEL LAYERS AS A PLATFORM FOR CELL STUDIES

This paper reports the design, synthesis and characterization of thin films as a platform for studying the separate influences of physical and chemical cues of a matrix on the adhesion, growth and final phenotype of cells. Independent control of the physical and chemical properties of functionalized, swellable hydrogel thin films was achieved using initiated Chemical Vapor Deposition (iCVD). The systematic variation in crosslink density is demonstrated to control the swelling ability of the iCVD hydrogel films based on 2-hydroxyethyl methacrylate (HEMA). At the same time, the incorporation of controllable concentrations of the active ester pentafluorophenyl methacrylate (PFM) allows easy immobilization of aminated bioactive motifs, such as bioactive peptides. Initial cell culture results with Human Umbilical Vein Endothelial Cells (HUVEC) indicated that the strategy of using PFM to immobilize a cell-adhesion peptide motif onto the hydrogel layers promotes proper HUVEC growth and enhances their phenotype.

Cell microencapsulation technology: towards clinical application

The pharmacokinetic properties of a drug can be significantly improved by the delivery process. Scientists have understood that developing suitable drug delivery systems that release the therapeutically active molecule at the level and dose it is needed and during the optimal time represents a major advance in the field. Cell microencapsulation is an alternative approach for the sustained delivery of therapeutic agents. This technology is based on the immobilization of different types of cells within a polymeric matrix surrounded by a semipermeable membrane for the long-term release of therapeutics. As a result, encapsulated cells are isolated from the host immune system while allowing exchange of nutrients and waste and release of the therapeutic agents. The versatility of this approach has stimulated its use in the treatment of numerous medical diseases including diabetes, cancer, central nervous system diseases and endocrinological disorders among others. The aim of this review article is to give an overview on the current state of the art of the use of cell encapsulation technology as a controlled drug delivery system. The most important advantages of this type of "living" drug release strategy are highlighted, but also its limitations pointed out, and the major challenges to be addressed in the forthcoming years are described.