Development and characterization of a novel drug nanocarrier for oral delivery, based on self-assembled β-casein micelles

Glutathione - IR 797 coupled Casein Nano-Trojan for augmenting the therapeutic efficacy of camptothecin in highly invasive triple negative breast cancer

The rapid metastasis & heterogenic constitution of triple negative breast cancer (TNBC) limits drug entry to the tumor, reducing treatment effectiveness. To address this, we have synthesized Casein nanoparticles (Cn NPs) with attached glutathione (GSH), a natural ligand for cancer cell overexpressed γ-glutamyl transpeptidase (GGT). Cn NPs encapsulated with Camptothecin and NIR dye IR 797 (CCN NPs) for combinatorial therapy of TNBC. The GSH-CCN nanoparticles (CCNG NPs) act as a Nano-Trojan to deceive the cancer cells by delivering therapeutic payloads directly to specific target cells. In this study, Casein Nano-Trojan is equipped with GSH as a targeting ligand for GGT. The binding of CCNG NPs with cell surface receptors switched the anionic charge to catanionic, prompting the target cell to engulf the nanoparticles. The Casein Nano-Trojan releases its therapeutic payload inside the target cell, potentially inhibiting proliferation & inducing a high percentage of cell death (85 ± 7 %). Disintegration of mitochondrial membrane potential, inhibition of both migration & re-growth were observed. Immunofluorescence, acridine orange/ethidium bromide stain, and nuclear fragmentation assay further confirmed the substantial DNA damage induced by the high expression of γH2AX and p53. Significant therapeutic efficacy was observed in the 3D spheroids of 4T1 cells and in vivo breast cancer mice model (BALB/c). These findings demonstrate that CCNG NPs could be an effective treatment approach for highly metastatic triple negative breast cancer.

Bovine milk β-casein: Structure, properties, isolation, and targeted application of isolated products

β-Casein, an important protein found in bovine milk, has significant potential for application in the food, pharmaceutical, and other related industries. This review first introduces the composition, structure, and functional properties of β-casein. It then reviews the techniques for isolating β-casein. Chemical and enzymatic isolation methods result in inactivity of β-casein and other components in the milk, and it is difficult to control the production conditions, limiting the utilization range of products. Physical technology not only achieves high product purity and activity but also effectively preserves the biological activity of the components. The isolated β-casein needs to be utilized effectively and efficiently for various purity products in order to achieve optimal targeted application. Bovine β-casein, which has a purity higher than or close to that of breast β-casein, can be used in infant formulas. This is achieved by modifying its structure through dephosphorylation, resulting in a formula that closely mimics the composition of breast milk. Bovine β-casein, which is lower in purity than breast β-casein, can be maximized for the preparation of functional peptides and for use as natural carriers. The remaining byproducts can be utilized as food ingredients, emulsifiers, and carriers for encapsulating and delivering active substances. Thus, realizing the intensive processing and utilization of bovine β-casein isolation. This review can promote the industrial production process of β-casein, which is beneficial for the sustainable development of β-casein as a food and material. It also provides valuable insights for the development of other active substances in milk.

Camptothecin loaded casein nanosystem for tuning the therapeutic efficacy against highly metastatic triple-negative breast cancer cells

The heterogenic of TNBC and the side effects of chemo drugs lead to the failure of therapy. Protein-based nanoplatforms have emerged as an important domain in protein-engineered biomedicine for delivering anticancer therapeutics. Protein-based nanosystems are biocompatible and biodegradable, with a long half-life and high purity. TNBC is sensitive to DNA-damaging chemo drugs. In this study, we used 10-hydroxy camptothecin, which causes DNA damage in cancer cells. However, the inappropriate solubility and toxic side effects limit its application in cancer therapy. We encapsulated 10-Hydroxycamptothecin in biocompatible casein by synthesizing nanoparticles from it. The synthesized CS and CCS NPs showed excellent biocompatibility in fibroblast cell lines L929, NIH-3T3, and zebrafish embryos. Enhanced uptake of CCS NPs in zebrafish embryos and 4T1 cells, cancer cell toxicity of nearly 80-85%, sub-cellular mitochondrial localization, alterations of mitochondrial membrane potential, lysosomal localization, and reactive oxygen species generation that causes cancer cell apoptosis have been observed. Growth inhibition of 4T1 cell colonies and antimetastatic activity were also noted. Further upregulation of γ-H2AX which causes DNA damage, downregulation of the PARP protein related to DNA repair, and increased level of the CHOP protein marker for endoplasmic reticulum stress-mediated cell death were observed. The 3-D model of 4T1 cells exhibited deep tumor penetration with significant therapeutic efficacy for CCS NPs. These results imply that casein-based nanoformulation could open a new scope for safe and affordable cancer therapy in TNBC.

Casein-Based Nanoparticles: A Potential Tool for the Delivery of Daunorubicin in Acute Lymphocytic Leukemia

The aim of this study was to develop casein-based nanoscale carriers as a potential delivery system for daunorubicin, as a pH-responsive targeting tool for acute lymphocytic leukemia. A coacervation technique followed by nano spray-drying was used for the preparation of drug-loaded casein nanoparticles. Four batches of drug-loaded formulations were developed at varied drug-polymer ratios using a simple coacervation technique followed by spray-drying. They were further characterized using scanning electron microscopy, dynamic light scattering, FTIR spectroscopy, XRD diffractometry, and differential scanning calorimetry. Drug release was investigated in different media (pH 5 and 7.4). The cytotoxicity of the daunorubicin-loaded nanoparticles was compared to that of the pure drug. The influence of the polymer-to-drug ratio on the nanoparticles' properties such as their particle size, surface morphology, production yield, drug loading, entrapment efficiency, and drug release behavior was studied. Furthermore, the cytotoxicity of the drug-loaded nanoparticles was investigated confirming their potential as carriers for daunorubicin delivery.

Improved Stability and In Vitro Anti-Arthritis Bioactivity of Curcumin-Casein Nanoparticles by Ultrasound-Driven Encapsulation

Curcumin possesses beneficial biological functions, namely anti-inflammation and anti-diabetic functions. However, due to its low solubility and crystallinity, its applications are limited. In this work, curcumin was encapsulated in casein micelles in order to form curcumin-casein nanoparticles by ultrasound treatment (5 min). The ultrasound treatment induced the entry of the hydrophobic groups to the inner micelles and the polar sulfydryl groups to the surface of the micelles in order to form compact curcumin-casein nanoparticles of an appropriate size (100-120 nm) for cellular endocytosis. The product exhibited excellent stability during 8 months of cold storage, 6 days at room temperature, and 2 days at body temperature. Advanced in vitro experiments demonstrated that curcumin-casein nanoparticles displayed significantly greater inhibitory activity against the proliferation and proinflammatory cytokines of human fibroblast-like synoviocyte-osteo arthritis (HFLS-OA) cells and HFLS-rheumatoid (RA) cells than native curcumin due to better cellular uptake as a result of the low crystallinity and the appropriate nano-size of the nano-form. The results provide a reference for the use of ultrasound treatment to encapsulate other drug molecules and curcumin-casein nanoparticles as potential treatment for arthritis.

Maillard induced glycation of β-casein for enhanced stability of the self-assembly micelles against acidic and calcium environment

Bovine β-casein (β-CN) has attracted increasingly interest as biocompatible nanocarrier for hydrophobic flavonoid due to its self-assembly ability to form micelles. This paper reported Maillard induced glycation reaction of β-CN using dextran in order to improve stability of naringenin-loaded β-CN micelles under acidic and high calcium environments. Our results showed that solubility of β-CN-graft-dextran was remarkable increased at acidic pH and the conjugation with 20 kDa dextran had the highest level of graft degree. Glycation restrained β-CN from aggregating around pH 5.0 where was close to the isoelectric point, forming spherical micelles with irregular and rough surfaces, which were significantly larger than the micelles at pH 7.0. β-CN-graft-dextran also overcame destabilization of the micelles induced by excess calcium and had no impact on the chelating ability of calcium. These findings appeared to be promising for future applications of modified β-CN-graft-dextran based on Maillard reaction as fairly stable nanocarrier under extreme condition.

Bioavailability Enhancement Techniques for Poorly Aqueous Soluble Drugs and Therapeutics

The low water solubility of pharmacoactive molecules limits their pharmacological potential, but the solubility parameter cannot compromise, and so different approaches are employed to enhance their bioavailability. Pharmaceutically active molecules with low solubility convey a higher risk of failure for drug innovation and development. Pharmacokinetics, pharmacodynamics, and several other parameters, such as drug distribution, protein binding and absorption, are majorly affected by their solubility. Among all pharmaceutical dosage forms, oral dosage forms cover more than 50%, and the drug molecule should be water-soluble. For good therapeutic activity by the drug molecule on the target site, solubility and bioavailability are crucial factors. The pharmaceutical industry’s screening programs identified that around 40% of new chemical entities (NCEs) face various difficulties at the formulation and development stages. These pharmaceuticals demonstrate less solubility and bioavailability. Enhancement of the bioavailability and solubility of drugs is a significant challenge in the area of pharmaceutical formulations. According to the Classification of Biopharmaceutics, Class II and IV drugs (APIs) exhibit poor solubility, lower bioavailability, and less dissolution. Various technologies are discussed in this article to improve the solubility of poorly water-soluble drugs, for example, the complexation of active molecules, the utilization of emulsion formation, micelles, microemulsions, cosolvents, polymeric micelle preparation, particle size reduction technologies, pharmaceutical salts, prodrugs, the solid-state alternation technique, soft gel technology, drug nanocrystals, solid dispersion methods, crystal engineering techniques and nanomorph technology. This review mainly describes several other advanced methodologies for solubility and bioavailability enhancement, such as crystal engineering, micronization, solid dispersions, nano sizing, the use of cyclodextrins, solid lipid nanoparticles, colloidal drug delivery systems and drug conjugates, referring to a number of appropriate research reports.

Advances in Protein-Based Nanocarriers of Bioactive Compounds: From Microscopic Molecular Principles to Macroscopical Structural and Functional Attributes

Many proteins can be used to fabricate nanocarriers for encapsulation, protection, and controlled release of nutraceuticals. This review examined the protein-based nanocarriers from microscopic molecular characteristics to the macroscopical structural and functional attributes. Structural, physical, and chemical properties of protein-based nanocarriers were introduced in detail. The spatial size, shape, water dispersibility, colloidal stability, etc. of protein-based nanocarriers were largely determined by the molecular physicochemical principles of protein. Different preparative techniques, including antisolvent precipitation, pH-driven, electrospray, and gelation methods, among others, can be used to fabricate different protein-based nanocarriers. Various modifications based on physical, chemical, and enzymatic approaches can be used to improve the functional performance of these nanocarriers. Protein is a natural resource with a wide range of sources, including plant, animal, and microbial, which are usually used to fabricate the nanocarriers. Protein-based nanocarriers have many advantages in aid of the application of bioactive ingredients to the medical, food, and cosmetic industries.

Milk β-casein as delivery systems for luteolin: Multi-spectroscopic, computer simulations, and biological studies

β-Casein, a highly amphiphilic calcium-sensitive phosphoprotein, has specific features that promote its application as a nanocarrier for hydrophobic bioactives. Luteolin is a flavonoid with rich biological activities existing in vegetables and fruits. It is important to understand the interaction of β-casein with luteolin for the development of β-casein-based delivery systems. Here, the interaction mode between luteolin and β-casein was investigated with multispectral techniques, computer simulation, and biological methods. The results demonstrated that luteolin could bind to β-casein spontaneously which is driven by hydrophobic interactions and statically quench the intrinsic fluorescence of β-casein. Molecular docking and molecular dynamics simulation showed that β-casein formed a stable complex with luteolin. It could be concluded that luteolin was encapsulated in β-casein micelles and exhibited higher antioxidant activity than luteolin alone. These results would be helpful to understand the interaction mechanism of luteolin with β-casein and indicated that β-casein micelles were very promising as delivery vehicles for luteolin. PRACTICAL APPLICATIONS: Adding bioactive compounds to food is an efficient method of functional food processing, and protein is an excellent natural carrier for these substances. β-Casein is a milk protein with a unique amphiphilic structure that makes it a natural nanocarrier for active ingredients. This study created β-casein nanocarriers and encapsulated luteolin based on the interaction mechanism between β-casein with luteolin. Luteolin encapsulated in β-casein micelles demonstrated higher antioxidant activity when compared to free luteolin. This research will provide useful data for the development of functional foods based on β-casein and luteolin in the food industry.

Polymer nanotherapeutics to correct autoimmunity

The immune system maintains homeostasis and protects the body from pathogens, mutated cells, and other harmful substances. When immune homeostasis is disrupted, excessive autoimmunity will lead to diseases. To inhibit the unexpected immune responses and reduce the impact of treatment on immunoprotective functions, polymer nanotherapeutics, such as nanomedicines, nanovaccines, and nanodecoys, were developed as part of an advanced strategy for precise immunomodulation. Nanomedicines transport cytotoxic drugs to target sites to reduce the occurrence of side effects and increase the stability and bioactivity of various immunomodulating agents, especially nucleic acids and cytokines. In addition, polymer nanomaterials carrying autoantigens used as nanovaccines can induce antigen-specific immune tolerance without interfering with protective immune responses. The precise immunomodulatory function of nanovaccines has broad prospects for the treatment of immune related-diseases. Besides, nanodecoys, which are designed to protect the body from various pathogenic substances by intravenous administration, are a simple and relatively noninvasive treatment. Herein, we have discussed and predicted the application of polymer nanotherapeutics in the correction of autoimmunity, including treating autoimmune diseases, controlling hypersensitivity, and avoiding transplant rejection.

Functional block copolymer micelles based on poly (jasmine lactone) for improving the loading efficiency of weakly basic drugs

Functionalization of polymers is an attractive approach to introduce specific molecular forces that can enhance drug–polymer interaction to achieve higher drug loading when used as drug delivery systems. The novel amphiphilic block copolymer of methoxy poly(ethylene glycol) and poly(jasmine lactone) i.e., mPEG-b-PJL, derived from renewable jasmine lactone provides free allyl groups on the backbone thus, allowing flexible and facile post-synthesis functionalization. In this study, mPEG-b-PJL and its carboxyl functionalized polymer mPEG-b-PJL-COOH were utilised to explore the effect of ionic interactions on the drug–polymer behaviour. Various drugs with different pK_a values were employed to prepare drug-loaded polymeric micelles (PMs) of mPEG-b-PJL, mPEG-b-PJL-COOH and Soluplus® (polyvinyl caprolactam–polyvinyl acetate–polyethylene glycol graft copolymer) via a nanoprecipitation method. Electrostatic interactions between the COOH pendant on mPEG-b-PJL-COOH and the basic drugs were shown to influence the entrapment efficiency. Additionally, molecular dynamics (MD) simulations were employed to understand the polymer–drug interactions at the molecular level and how polymer functionalization influenced these interactions. The release kinetics of the anti-cancer drug sunitinib from mPEG-b-PJL and mPEG-b-PJL-COOH was assessed, and it demonstrated a sustainable drug release pattern, which depended on both pH and temperature. Furthermore, the cytotoxicity of sunitinib-loaded micelles on cancer cells was evaluated. The drug-loaded micelles exhibited dose-dependent toxicity. Also, haemolysis capacity of these polymers was investigated. In summary, polymer functionalization seems a promising approach to overcome challenges that hinder the application of polymer-based drug delivery systems such as low drug loading degree.

Block copolymer micelles with a functional core have been synthesized and evaluated for their drug delivery capability. High drug loading was observed due to strong ionic interactions, while cytotoxicity of polymers was found to be low.

Investigation of Solution Behavior of Antidepressant Imipramine Hydrochloride Drug and Non-Ionic Surfactant Mixture: Experimental and Theoretical Study

In this paper, the interaction of imipramine hydrochloride (IMP, antidepressant drug) and a non-ionic surfactant Triton X-100 (TX-100) mixture in five different ratios through the tensiometric method in different solvents (aqueous/0.050 mol·kg⁻¹ aqueous NaCl/0.250 mol·kg⁻¹ aqueous urea (U)) were examined thoroughly at a temperature of 298 K. UV–Visible studies in an aqueous system of IMP + TX-100 mixtures were also investigated and discussed in detail. The pure (IMP and TX-100) along with the mixtures’ critical micelle concentration (cmc) were assessed by a tensiometric technique. The obtained deviation of the mixtures’ cmc values from their ideal values revealed the nonideal behavior of IMP + TX-100 mixtures amongst IMP and TX-100. Compared to aqueous systems, in the presence of aqueous NaCl, several changes in micelles/mixed micelles occurred, and hence a synergism/attractive interaction amongst components was found increased while in the existence of U, the synergism/attractive interaction between them decreased. The evaluated interaction parameter (β^Rb) value of mixed micelles showed the attractive or synergism between the IMP and TX-100. Various evaluated thermodynamic parameters in an aqueous system showed that the mixed micellization of the IMP + TX-100 mixture was an entropically spontaneous phenomenon, although the existence of salt in all studied systems can somewhat increase the spontaneity of the micellization process and in the aqueous U system, the spontaneity of the micellization process decreased. In an aqueous system, the interaction between IMP and TX-100 was also confirmed by UV–Visible study.

Nanomedicine Strategies for Anti-Inflammatory Treatment of Noninfectious Arthritis

Noninfectious arthritis (NIA) comprises a class of chronic and progressive inflammatory disorders that require early-stage management to prevent disease progression. The most common forms include osteoarthritis, rheumatoid arthritis, ankylosing spondylitis, and gouty arthritis. Current treatments involve nonsteroidal anti-inflammatory drugs, disease-modifying antirheumatic drugs and glucocorticoids to alleviate clinical symptoms, although regular use of these can result in a high risk of chronic kidney disease and heart failure, as well as severe adverse gastrointestinal effects. Nanomedicine offers unique opportunities to address these challenges and improve therapeutic efficacy due to its ability to deliver therapeutics locally in a sustained manner, thus extending the half-life, improving bioavailability, and reducing the side effects of these agents. This review includes a comprehensive analysis of the mechanisms of various treatment options for NIA and highlights recent progress and emerging strategies in treating NIA with nanomedicine platforms, particularly related to long-term biosafety and nonspecific targeting in designing nanomedicine delivery systems.

Assembled milk protein nano-architectures as potential nanovehicles for nutraceuticals

Nanoencapsulation of hydrophobic nutraceuticals with food ingredients has become one of topical research subjects in food science and pharmaceutical fields. To fabricate food protein-based nano-architectures as nanovehicles is one of effective strategies or approaches to improve water solubility, stability, bioavailability and bioactivities of poorly soluble or hydrophobic nutraceuticals. Milk proteins or their components exhibit a great potential to assemble or co-assemble with other components into a variety of nano-architectures (e.g., nano-micelles, nanocomplexes, nanogels, or nanoparticles) as potential nanovehicles for encapsulation and delivery of nutraceuticals. This article provides a comprehensive review about the state-of-art knowledge in utilizing milk proteins to assemble or co-assemble into a variety of nano-architectures as promising encapsulation and delivery nano-systems for hydrophobic nutraceuticals. First, a brief summary about composition, structure and physicochemical properties of milk proteins, especially caseins (or casein micelles) and whey proteins, is presented. Then, the disassembly and reassembly behavior of caseins or whey proteins into nano-architectures is critically reviewed. For caseins, casein micelles can be dissociated and further re-associated into novel micelles, through pH- or high hydrostatic pressure-mediated disassembly and reassembly strategy, or can be directly formed from caseinates through a reassembly process. In contrast, the assembly of whey protein into nano-architectures usually needs a structural unfolding and subsequent aggregation process, which can be induced by heating, enzymatic hydrolysis, high hydrostatic pressure and ethanol treatments. Third, the co-assembly of milk proteins with other components into nano-architectures is also summarized. Last, the potential and effectiveness of assembled milk protein nano-architectures, including reassembled casein micelles, thermally induced whey protein nano-aggregates, α-lactalbumin nanotubes or nanospheres, co-assembled milk protein-polysaccharide nanocomplexes or nanoparticles, as nanovehicles for nutraceuticals (especially those hydrophobic) are comprehensively reviewed. Due to the fact that milk proteins are an important part of diets for human nutrition and health, the review is of crucial importance not only for the development of novel milk protein-based functional foods enriched with hydrophobic nutraceuticals, but also for providing the newest knowledge in the utilization of food protein assembly behavior in the nanoencapsulation of nutraceuticals.

Enhanced antibacterial activity of eugenol-entrapped casein nanoparticles amended with lysozyme against gram-positive pathogens

This study aimed to investigate the antibacterial efficiency and synergistic mechanisms of novel formulated eugenol-casein-lysozyme nanoparticles (ECL-NPs) against gram-positive bacteria. We obtained optimized ECL-NPs 151.9 nm in size and with an entrapment efficiency of 92.2%. ECL-NPs exhibited a satisfactory slow-release pattern, excellent storage stability (for 180 days at 4 °C), and freeze-drying stability. The synergy of low-dose lysozyme significantly enhanced the inhibitory efficiency of eugenol-casein nanoparticles against Staphylococcus aureus and Bacillus sp. by 5.83-fold and 5.53-fold, respectively; this resulted in a much lower minimum inhibitory concentration (3.75-fold and 4.16-fold) and minimum bacterial concentration (2.92-fold and 1.70-fold) values. Scanning electron microscopy clearly demonstrated that the entire cell morphological structure was broken into pieces after exposure to ECL-NPs. Furthermore, 100% microbial inhibition was observed in fresh fruits treated with ECL-NPs for 15 days. These findings suggest that ECL-NPs have an excellent potential for use in food industry against gram-positive bacteria.

Recent developments in natural and synthetic polymeric drug delivery systems used for the treatment of osteoarthritis

Osteoarthritis (OA), is a common musculoskeletal disorder that will progressively increase in older populations and is expected to be the most dominant cause of disability in the world population by 2030. The progression of OA is controlled by a multi-factorial pathway that has not been completely elucidated and understood yet. However, over the years, research efforts have provided a significant understanding of some of the processes contributing to the progression of OA. Both cartilage and bone degradation processes induce articular cells to produce inflammatory mediators that produce proinflammatory cytokines that block the synthesis of collagen type II and aggrecan, the major components of cartilage. Systemic administration and intraarticular injection of anti-inflammatory agents are the first-line treatments of OA. However, small anti-inflammatory molecules are rapidly cleared from the joint cavity which limits their therapeutic efficacy. To palliate this strong technological drawback, different types of polymeric materials such as microparticles, nanoparticles, and hydrogels, have been examined as drug carriers for the delivery of therapeutic agents to articular joints. The main purpose of this review is to provide a summary of recent developments in natural and synthetic polymeric drug delivery systems for the delivery of anti-inflammatory agents to arthritic joints. Furthermore, this review provides an overview of the design rules that have been proposed so far for the development of drug carriers used in OA therapy. Overall it is difficult to state clearly which polymeric platform is the most efficient one because many advantages and disadvantages could be pointed to both natural and synthetic formulations. That requires further research in the near future.

Advances in Oral Drug Delivery

The oral route is the most common route for drug administration. It is the most preferred route, due to its advantages, such as non-invasiveness, patient compliance and convenience of drug administration. Various factors govern oral drug absorption including drug solubility, mucosal permeability, and stability in the gastrointestinal tract environment. Attempts to overcome these factors have focused on understanding the physicochemical, biochemical, metabolic and biological barriers which limit the overall drug bioavailability. Different pharmaceutical technologies and drug delivery systems including nanocarriers, micelles, cyclodextrins and lipid-based carriers have been explored to enhance oral drug absorption. To this end, this review will discuss the physiological, and pharmaceutical barriers influencing drug bioavailability for the oral route of administration, as well as the conventional and novel drug delivery strategies. The challenges and development aspects of pediatric formulations will also be addressed.

Platinum (II)-coordinated Portulaca oleracea polysaccharides as metal-drug based polymers for anticancer study

Novel polysaccharide-platinum conjugated polymers bearing alendronate on Portulaca oleracea polysaccharides (PPS) were designed and synthesized. Their chemical structures and properties were characterized by Fourier transform infrared spectroscopy (FT-IR), ¹H NMR and ³¹P NMR spectroscopy, Thermogravimetric analysis (TGA), X-ray powder diffraction (XRD), UV-vis spectrophotometer (UV-vis) and other analysis methods. The results demonstrated that alendronate can be used as the linker of Portulaca oleracea polysaccharides and platinum compounds. Portulaca oleracea polysaccharides-alendronate (PPS-ALN) conjugates exhibited stronger antioxidant ability than PPS. The cytotoxicity assay to cancer cells was tested in vitro, and the Portulaca oleracea polysaccharides-alendronate-platinum (PPS-ALN-Pt) conjugates strongly inhibited the proliferation of cancer cells than PPS and PPS-ALN. The evaluation of complexes affinity toward supercoiled plasmid DNA, displayed a high DNA interaction. Interestingly, the platinum conjugates displayed immunological competence in HeLa cells by cellular immunofluorescence assay. Besides, the cellular platinum accumulation of PPS-ALN-Pt conjugates was higher than that of cisplatin in HeLa cells, implying that the polysaccharide-platinum conjugated polymers might have a synergistically therapeutic application in metal anticancer drug delivery.

Micellar Drug Delivery Systems Based on Natural Biopolymers

The broad diversity of structures and the presence of numerous functional groups available for chemical modifications represent an enormous advantage for the development of safe, non-toxic, and cost-effective micellar drug delivery systems (DDS) based on natural biopolymers, such as polysaccharides, proteins, and peptides. Different drug-loading methods are used for the preparation of these micellar systems, but it appeared that dialysis is generally recommended, as it avoids the formation of large micellar aggregates. Moreover, the preparation method has an important influence on micellar size, morphology, and drug loading efficiency. The small size allows the passive accumulation of these micellar systems via the permeability and retention effect. Natural biopolymer-based micellar DDS are high-value biomaterials characterized by good compatibility, biodegradability, long blood circulation time, non-toxicity, non-immunogenicity, and high drug loading, and they are biodegraded to non-toxic products that are easily assimilated by the human body. Even if some recent studies reported better antitumoral effects for the micellar DDS based on polysaccharides than for commercial formulations, their clinical use is not yet generalized. This review is focused on the studies from the last decade concerning the preparation as well as the colloidal and biological characterization of micellar DDS based on natural biopolymers.

Multidomain drug delivery systems of β-casein micelles for the local oral co-administration of antiretroviral combinations

The antiretroviral (ARV) cocktailrevolved the treatment of the human immunodeficiency virus (HIV) infection. Drug combinations have been also tested to treat other infectious diseases, including the recentcoronavirus disease 2019 (COVID-19) outbreak. To simplify administration fixed-dose combinationshave been introduced, however, oral anti-HIV therapy still struggles with low oral bioavailability of many ARVs.This work investigated the co-encapsulation of two clinically relevant ARV combinations,tipranavir (TPV):efavirenz (EFV) anddarunavir (DRV):efavirenz (EFV):ritonavir (RTV),within the core of β-casein (bCN) micelles. Encapsulation efficiency in both systems was ~100%. Cryo-transmission electron microscopy and dynamic light scattering of the ARV-loaded colloidaldispersions indicatefull preservation of the spherical morphology, and x-ray diffraction confirm that the encapsulated drugs are amorphous. To prolong the physicochemical stabilitythe formulations were freeze-driedwithout cryo/lyoprotectant, and successfully redispersed, with minor changes in morphology.Then, theARV-loaded micelles were encapsulated within microparticles of Eudragit® L100, which prevented enzymatic degradation and minimized drug release under gastric-like pH conditionsin vitro. At intestinal pH, the coating polymer dissolved and released the nanocarriers and content. Overall, our results confirm the promise of this flexible and modular technology platform for oral delivery of fixed dose combinations.

Self-Assembled Casein Nanoparticles Loading Triptolide for the Enhancement of Oral Bioavailability

Triptolide (TP), a broad-spectrum antitumor drug, has very poor solubility and oral bioavailability, which limits its clinical use. Compared with conventional formulations of TP, a casein (Cas)-based drug delivery system has been reported to have significant advantages for the improvement of solubility and bioavailability of insoluble drugs. In this paper, we report the successful preparation of TP-loaded Cas nanoparticles (TP-Cas) using the self-assembly characteristics of Cas in water and the optimization of the formulation by evaluation of entrapment efficiency (EE) and loading efficiency (LE). Dynamic light scattering, transmission electron microscopy, Fourier-transform infrared spectrometry, X-ray diffractometry (XRD), and differential scanning calorimetry (DSC) was adopted to characterize the TP-Cas. Results showed that the obtained TP-Cas were approximately spherical with a particle size of 128.7 ± 11.5 nm, EE of 72.7 ± 4.7 %, and LE of 8.0% ± 0.5%. Furthermore, in vitro release behavior of TP-Cas in PBS (pH = 7.4) was also evaluated, showing a sustained-release profile. Additionally, an in vivo study in rats displayed that the mean plasma concentration of TP after oral administration of TP-Cas was significantly higher than that treated with TP oral suspension. The C max value for TP-Cas (8.0 ± 4.4 μg/mL) was significantly increased compared with the free TP (0.9 ± 0.3 μg/mL). Accordingly, the area under the curve (AUC0-8) of TP-Cas was 2.8 ± 0.8 mg/L·h, 4.3-fold higher than that of TP suspension (0.6 ± 0.1 mg/L·h). Therefore, it can be concluded that TP-Cas enhanced the absorption and improved oral bioavailability of TP. Taking the good oral safety of Cas into consideration, TP-Cas should be a more promising preparation of TP for clinical application.

Formulation and In Vitro Evaluation of Casein Nanoparticles as Carrier for Celecoxib

Purpose: The objective of this work was to formulate casein (CAS) nanocarriers for the dissolution enhancement of poorly water soluble drug celecoxib (CLXB).

Methods: The CLXB loaded CAS nanocarriers viz., nanoparticles, reassembled CAS micelles and nanocapsules were prepared using sodium caseinate (SOD-CAS) as a carrier to enhance the solubility of CLXB. The prepared formulations were characterized for particle size, polydispersity index, zeta potential, percentage entrapment efficiency, and surface morphology for the selection of best formulation. Fourier transform infrared spectroscopy, differential scanning calorimetry and X-ray powder diffraction study was used to for the confirmation of encapsulation of CLXB. Further,in vitro drug dissolution, ex-vivo permeation studies on chicken ileum and stability studies were carried out.

Results: The CLXB loaded casein nanoparticles (CNP) (batch A2) showed a particle size diameter 216.1 nm, polydispersity index 0.422 with percentage entrapment efficiency of 90.71% and zeta potential of -24.6 mV. Scanning electron microscopy of suspension confirmed globular shape of CNP. Thein vitro release data of optimized batch followed non Fickian diffusion mechanism. The ex vivo permeation studies on chicken ileum of CLXB loaded CNP showed permeation through mucous membrane as compared to pure CLXB. The apparent permeability of best selected freeze dried CLXB loaded CNP (batch A2) was higher and gradually increased from 0.90 mg/cm² after 10 min to a maximum of 1.95 mg/cm² over the subsequent 90 min. A higher permeation was recorded at each time point than that of the pure CLXB.

Conclusion: The study explored the potential of CAS as a carrier for solubility enhancement of poorly water soluble drugs.

Mathematical Modeling and Release Kinetics of Green Tea Polyphenols Released from Casein Nanoparticles

Drug release kinetics plays an important role in determining the mechanism of drug release, which in turn helps in formulating controlled/sustained release formulations. In our study, different concentrations of green tea polyphenols (GTP) were encapsulated into casein nanoparticles which showed a maximum encapsulation efficiency (76.9%) at a GTP concentration of 5 mg/mL. The casein nanoparticles were characterized through particle size analysis, zeta potential, AFM, and HR SEM, followed by molecular docking studies, which confirmed the binding of GTP to casein nanoparticles. In-vitro release studies carried out at different temperatures and pH showed no significant difference in the release pattern, but the release was prolonged even up to 48 h. On varying pH of the release medium, an increase in the percentage of release was observed as the pH shifted from acidic to basic. All release data showed good correlation with Zero order kinetics, an ideal model for release of drugs from nanoparticulate sustained release formulations, with anomalous mode of drug transport. Antioxidant activity of the released GTP determined through DPPH assay showed potent antioxidant effect of GTP even after 48 h of its release. Our data indicated that casein nanoparticles could be used as a potent vehicle for the delivery of GTP for achieving a sustained release.

Casein nanoparticles as oral delivery carriers of mequindox for the improved bioavailability

Mequindox (Meq) is a promising broad-spectrum antibacterial agent, but the clinical application of Meq has been hampered by its low oral bioavailability. Casein (Cas) can bind to a variety of poorly water-soluble drugs to improve their water solubility through a micellar solubilization mechanism. Here, a low-cost and convenient method was introduced to prepare mequindox-loaded casein nanoparticles (Meq-Cas). Meq-Cas was characterized by several methods including differential scanning calorimetry (DSC), X-ray diffraction (XRD), and fourier transform infrared (FTIR) to illuminate the mutual effect between the drug and carriers. Meq-Cas presented nearly spherical nanoparticles with smooth surfaces and its mean particle size was lower than untreated Cas. Meq-Cas showed a nearly complete release of Meq, which displayed a biphasic drug release pattern in both phosphate-buffered solution (PBS) and simulated gastric fluid (SGF). The relative oral bioavailability of Meq-Cas was found to be about 1.20 times higher than that of the animals treated with Meq suspension (control). These results suggest that Cas is a good candidate to load in Meq for pharmaceutical purposes.

Think Beyond the Core: Impact of the Hydrophilic Corona on Drug Solubilization Using Polymer Micelles

Polymeric micelles are typically characterized as core-shell structures. The hydrophobic core is considered as a depot for hydrophobic molecules, and the corona-forming block acts as a stabilizing and solubilizing interface between the core and aqueous milieu. Tremendous efforts have been made to tune the hydrophobic block to increase the drug loading and stability of micelles, whereas the role of hydrophilic blocks is rarely investigated in this context, with poly(ethylene glycol) (PEG) being the gold standard of hydrophilic polymers. To better understand the role of the hydrophilic corona, a small library of structurally similar A-B-A-type amphiphiles based on poly(2-oxazoline)s and poly(2-oxazine)s is investigated by varying the hydrophilic block A utilizing poly(2-methyl-2-oxazoline) (pMeOx; A) or poly(2-ethyl-2-oxazoline) (pEtOx; A*). In terms of hydrophilicity, both polymers closely resemble PEG. The more hydrophobic block B bears either a poly(2-oxazoline) and poly(2-oxazine) backbone with C3 (propyl) and C4 (butyl) side chains. Surprisingly, major differences in loading capacities from A-B-A > A*-B-A > A*-B-A* is observed for the formulation with two poorly water-soluble compounds, curcumin and paclitaxel, highlighting the importance of the hydrophilic corona of polymer micelles used for drug formulation. The formulations are also characterized by various nuclear magnetic resonance spectroscopy methods, dynamic light scattering, cryogenic transmission electron microscopy, and (micro) differential scanning calorimetry. Our findings suggest that the interaction between the hydrophilic block and the guest molecule should be considered an important, but previously largely ignored, factor for the rational design of polymeric micelles.

Cutaneous Application of Celecoxib for Inflammatory and Cancer Diseases

BACKGROUND

Nonsteroidal anti-inflammatory drugs (NSAIDs) and particularly selective cyclooxygenase-2 (COX-2) inhibitors such as celecoxib (Cxb) are considered promising cancer chemopreventive for colon, breast, prostate, lung, and skin cancers. However, the clinical application to the prevention is limited by concerns about safety, potential to serious toxicity (mainly for healthy individuals), efficacy and optimal treatment regimen. Cxb exhibits advantages as potent antiinflammatory and gastrointestinal tolerance compared with conventional NSAID's. Recent researches suggest that dermatological formulations of Cxb are more suitable than oral administration in the treatment of cutaneous disease, including skin cancer. To date, optimism has been growing regarding the exploration of the topical application of Cxb (in the prevention of skin cancers and treatment of cutaneous inflammation) or transdermal route reducing risks of systemic side effects.

OBJECTIVE

This paper briefly summarizes our current knowledge of the development of the cutaneous formulations or delivery systems for Cxb as anti-inflammatory drug (for topical or transdermal application) as well its chemopreventive properties focused on skin cancer.

CONCLUSION

New perspectives emerge from the growing knowledge, bringing innovative techniques combining the action of Cxb with other substances or agents which act in a different way, but complementary, increasing the efficacy and minimizing toxicity.

Structural Modification of Nanomicelles through Phosphatidylcholine: The Enhanced Drug-Loading Capacity and Anticancer Activity of Celecoxib-Casein Nanoparticles for the Intravenous Delivery of Celecoxib

This study aims to stabilize loaded celecoxib (CX) by modifying the structure of casein nanoparticles through phosphatidylcholine. The results show that Egg yolk phosphatidylcholine PC_98T (PC) significantly increased the stability of CX-PC-casein nanoparticles (NPs) (192.6 nm) from 5 min (CX-β-casein-NPs) to 2.5 h at 37 °C. In addition, the resuspended freeze-dried NPs (202.4 nm) remained stable for 2.5 h. Scanning electron microscopy indicated that PC may block the micropore structures in nanoparticles by ultrasonic treatment and hence improve the physicochemical stability of CX-PC-casein-NPs. The stability of the NPs was positively correlated with their inhibiting ability for human malignant melanoma A375 cells. The structural modification of CX-PC-casein-NPs resulted in an increased intracellular uptake of CX by 2.4 times than that of the unmodified ones. The pharmacokinetic study showed that the Area Under Curve (AUC) of the CX-PC-casein-NPs was 2.9-fold higher in rats than that of the original casein nanoparticles. When CX-PC-casein-NPs were intravenously administrated to mice implanted with A375 tumors (CX dose = 16 mg/kg bodyweight), the tumor inhibition rate reached 56.2%, which was comparable to that of paclitaxel (57.3%) at a dose of 4 mg/kg bodyweight. Our results confirm that the structural modification of CX-PC-casein-NPs can effectively prolong the remaining time of specific drugs, and may provide a potential strategy for cancer treatment.

Enhanced Antifungal Activities of Eugenol-Entrapped Casein Nanoparticles against Anthracnose in Postharvest Fruits

This study aims to improve the antifungal effects of eugenol through low-energy self-assembly fabrication and optimization of eugenol-casein nanoparticles (EC-NPs). Optimized EC-NPs (eugenol/casein ratio of 1:5) were obtained with a mean size of 307.4 ± 2.5 nm and entrapment efficiency of 86.3% ± 0.2%, and showed high stability under incubated at 20 and 37 °C for 48 h. EC-NPs exhibited satisfactory sustained-release effect at 20 °C or 37 °C, with remaining eugenols amounts of 79.51% and 53.41% after 72 h incubation, respectively, which were significantly higher than that of native eugenol (only 26.40% and 19.82% after the first 12 h). EC-NPs exhibited a greater antifungal activity (>95.7%) against spore germination of fungus that was greater than that of native eugenol, showed 100% inhibition of the anthracnose incidence in postharvest pear after 7 d. EC-NPs is potential as an environmental-friendly preservatives in the food industry.

Manufacture and Physicochemical Properties of Chitosan Oligosaccharide/A2 β-Casein Nano-Delivery System Entrapped with Resveratrol

The purposes of this research were to form chitosan oligosaccharide (CSO)/A2 β-casein nano-delivery systems (NDSs) and to investigate the effects of production variables, such as CSO concentration levels (0.1%, 0.2%, and 0.3%, w/v) and manufacturing temperature (5°C, 20°C, and 35°C), on the production and physicochemical characteristics of CSO/A2 β-casein NDSs to carry resveratrol. The morphological characteristics of CSO/A2 β-casein NDSs were assessed by the use of transmission electron microscopy (TEM) and particle size analyzer. High-performance liquid chromatography (HPLC) was applied to determine the entrapment efficiency (EE) of resveratrol. In the TEM images, globular-shaped particles with a diameter from 126 to 266 nm were examined implying that NDSs was successfully formed. As CSO concentration level was increased, the size and zeta-potential values of NDSs were significantly (p<0.05) increased. An increase in manufacturing temperature from 5°C to 35°C resulted in a significant (p<0.05) increase in the size and polydispersity index of NDSs. Over 85% of resveratrol was favorably entrapped in CSO/A2 β-casein NDSs. The entrapment efficiency (EE) of resveratrol was significantly (p<0.05) enhanced with an increase in manufacturing temperature while CSO concentration level did not significantly affect EE of resveratrol. There were no significant (p<0.05) changes observed in the size and polydispersity index of NDSs during heat treatments and storage in model milk and yogurt indicating that CSO/A2 β-casein NDSs exhibited excellent physical stability. In conclusion, the CSO concentration level and manufacturing temperature were the crucial determinants affecting the physicochemical characteristics of CSO/A2 β-casein NDSs containing resveratrol.

Menthol-modified casein nanoparticles loading 10-hydroxycamptothecin for glioma targeting therapy

Chemotherapy outcomes for the treatment of glioma remains unsatisfactory due to the inefficient drug transport across the blood-brain barrier (BBB) and insufficient drug accumulation in the tumor region. Although many approaches, including various nanosystems, have been developed to promote the distribution of chemotherapeutics in the brain tumor, the delivery efficiency and the possible damage to the normal brain function still greatly restrict the clinical application of the nanocarriers. Therefore, it is urgent and necessary to discover more safe and effective BBB penetration and glioma-targeting strategies. In the present study, menthol, one of the strongest BBB penetration enhancers screened from traditional Chinese medicine, was conjugated to casein, a natural food protein with brain targeting capability. Then the conjugate self-assembled into the nanoparticles to load anti-cancer drugs. The nanoparticles were characterized to have appropriate size, spheroid shape and high loading drug capacity. Tumor spheroid penetration experiments demonstrated that penetration ability of menthol-modified casein nanoparticles (M-CA-NP) into the tumor were much deeper than that of unmodified nanoparticles. In vivo imaging further verified that M-CA-NPs exhibited higher brain tumor distribution than unmodified nanoparticles. The median survival time of glioma-bearing mice treated with HCPT-M-CA-NPs was significantly prolonged than those treated with free HCPT or HCPT-CA-NPs. HE staining of the organs indicated the safety of the nanoparticles. Therefore, the study combined the advantages of traditional Chinese medicine strategy with modern delivery technology for brain targeting, and provide a safe and effective approach for glioma therapy.

Self-Assembled Micelles Based on OSA-Modified Starches for Enhancing Solubility of β-Carotene: Effect of Starch Macromolecular Architecture

Self-assembled micelles based on octenyl succinic anhydride (OSA)-modified starch were prepared to enhance the solubility of β-carotene. The critical micelle concentration (CMC) was lower for OSA-modified starch with a lower molecular weight (Mw) or higher degree of substitution (DS). Above the CMC, OSA-modified starch assembled into spherical micelles with an average hydrodynamic diameter of <20 nm, as determined by dynamic light scattering (DLS). All the radii of gyration ( R_g), obtained from Guinier fitting of small-angle X-ray scattering (SAXS) data, were between 3 and 9 nm, and they were positively correlated with the Mw but negatively correlated with both the DS and the starch concentration. β-Carotene was encapsulated effectively into the starch micelles, and the concentration of β-carotene in the micelles was positively correlated with the concentration, Mw, and DS of the starch, with a maximum value of 53.14 μg/mL. The incorporation of β-carotene enlarged the hydrophobic core and induced a significant increase in the R_g of the micelles determined by SAXS, and it may have also promoted the aggregation of the micelles resulting in a marked increase in the D_h determined by DLS.

Progress to Improve Oral Bioavailability and Beneficial Effects of Resveratrol

Resveratrol (3,5,4'-trihydroxystilbene; RSV) is a natural nonflavonoid polyphenol present in many species of plants, particularly in grapes, blueberries, and peanuts. Several in vitro and in vivo studies have shown that in addition to antioxidant, anti-inflammatory, cardioprotective and neuroprotective actions, it exhibits antitumor properties. In mammalian models, RSV is extensively metabolized and rapidly eliminated and therefore it shows a poor bioavailability, in spite it of its lipophilic nature. During the past decade, in order to improve RSV low aqueous solubility, absorption, membrane transport, and its poor bioavailability, various methodological approaches and different synthetic derivatives have been developed. In this review, we will describe the strategies used to improve pharmacokinetic characteristics and then beneficial effects of RSV. These methodological approaches include RSV nanoencapsulation in lipid nanocarriers or liposomes, nanoemulsions, micelles, insertion into polymeric particles, solid dispersions, and nanocrystals. Moreover, the biological results obtained on several synthetic derivatives containing different substituents, such as methoxylic, hydroxylic groups, or halogens on the RSV aromatic rings, will be described. Results reported in the literature are encouraging but require additional in vivo studies, to support clinical applications.

Colloidal properties of protein complexes formed in β-casein concentrate solutions as influenced by heating and cooling in the presence of different solutes

Monomeric bovine β-casein self-associates into micelles under appropriate conditions of protein concentration, serum composition and temperature. The present study investigated self-association characteristics of a β-casein concentrate (BCC) prepared from milk at pilot-scale using membrane filtration. The BCC had a casein:whey protein ratio of 77:23, with ∼95% of casein consisting of β-casein, and the remainder being mostly κ-CN. BCC was reconstituted to 1.2% protein (a typical level in infant formula) in various liquid media at pH 6.8 and incubated at different temperatures from 4 to 63 °C for 30 min. Self-association of β-casein on heating was thermo-reversible in deionised water, lactose (4, 6 or 8%) or calcium (9 mM) solutions. In most serum phases, BCC became highly opaque after incubation at 63 °C, but clarified rapidly during cooling to 25 °C. However, in simulated milk ultrafiltrate (SMUF), which has a high ionic strength and is supersaturated in calcium phosphate (CaP), BCC remained opaque during cooling to 25 °C, and retained residual turbidity after 15 h of holding at 4 °C; if SMUF was prepared without phosphate then turbidity development in BCC solutions was markedly reduced. The complexes responsible for this turbidity development were successfully dissociated with 50 mM trisodium citrate. Analysis of pH during heating and holding at 60 °C indicated that SMUF acidified continuously under the period of study, while acidification in BCC/SMUF mixtures terminated after a short period, indicating that the type of CaP formed on heating is altered in the presence of BCC. This study demonstrates that BCC ingredients exhibit pronounced temperature-dependant changes in colloidal properties that are strongly affected by the presence of minerals commonly found in nutritional product formulations.

Preclinical Explorative Assessment of Celecoxib-Based Biocompatible Lipidic Nanocarriers for the Management of CFA-Induced Rheumatoid Arthritis in Wistar Rats

Celecoxib (CXB), a COX-2 inhibitor, is primarily indicated for long-term treatment of rheumatoid arthritis (RA). The effective therapeutic efficacy of CXB on RA via oral administration shows adverse systemic complications, and therefore, local application of CXB has been recommended. The aim of the present study was to develop and characterize solid lipid nanoparticles (SLNs) with enhanced skin permeation potential of CXB. The particle size, polydispersity index (PDI), and percentage drug entrapment (PDE) of the developed SLNs (CXB-SLNs) were found to be 240 nm, < 0.3, and ~ 86% respectively. The developed SLNs exhibited sustained release up to 70% at the end of 48 h. Drug permeation was found to be 45% for SLN gel and 31% for conventional gel. The dermatokinetic studies also confirmed enhanced permeation of CXB in the epidermis and dermis and revealed superiority of the developed SLN gel vis-à-vis the conventional gel. Further, in the CFA-induced arthritis rat model, % arthritis index (AI) of the CXB-SLN gel formulation was found to be very less (18.54%) as compared to untreated (187.34%) and conventional gel-treated (91.61%) animals. In conclusion, the current study can provide a suitable alternative for the development of an effective topical formulation of CXB in lipid nanocarriers.

Co-Delivery of Ciprofloxacin and Colistin in Liposomal Formulations with Enhanced In Vitro Antimicrobial Activities against Multidrug Resistant Pseudomonas aeruginosa

PURPOSE

This study aims to develop liposomal formulations containing synergistic antibiotics of colistin and ciprofloxacin for the treatment of infections caused by multidrug-resistant Pseudomonas aeruginosa.

METHODS

Colistin (Col) and ciprofloxacin (Cip) were co-encapsulated in anionic liposomes by ammonium sulfate gradient. Particle size, encapsulation efficiency, in vitro drug release and in vitro antibiotic activities were evaluated.

RESULTS

The optimized liposomal formulation has uniform sizes of approximately 100 nm, with encapsulation efficiency of 67.0% (for colistin) and 85.2% (for ciprofloxacin). Incorporation of anionic lipid (DMPG) markedly increased encapsulation efficiency of colistin (from 5.4 to 67.0%); however, the encapsulation efficiency of ciprofloxacin was independent of DMPG ratio. Incorporation of colistin significantly accelerated the release of ciprofloxacin from the DMPG anionic liposomes. In vitro release of ciprofloxacin and colistin in the bovine serum for 2 h were above 70 and 50%. The cytotoxicity study using A549 cells showed the liposomal formulation is as non-toxic as the drug solutions. Liposomal formulations of combinations had enhanced in vitro antimicrobial activities against multidrug resistant P. aeruginosa than the monotherapies.

CONCLUSIONS

Liposomal formulations of two synergistic antibiotics was promising against multidrug resistant P. aeruginosa infections.

Application of Light Scattering Techniques to Nanoparticle Characterization and Development

Over the years, the scientific importance of nanoparticles for biomedical applications has increased. The high stability and biocompatibility, together with the low toxicity of the nanoparticles developed lead to their use as targeted drug delivery systems, bioimaging systems, and biosensors. The wide range of nanoparticles size, from 10 nm to 1 μm, as well as their optical properties, allow them to be studied using microscopy and spectroscopy techniques. In order to be effectively used, the physicochemical properties of nanoparticle formulations need to be taken into account, namely, particle size, surface charge distribution, surface derivatization and/or loading capacity, and related interactions. These properties need to be optimized considering the final nanoparticle intended biodistribution and target. In this review, we cover light scattering based techniques, namely dynamic light scattering and zeta-potential, used for the physicochemical characterization of nanoparticles. Dynamic light scattering is used to measure nanoparticles size, but also to evaluate their stability over time in suspension, at different pH and temperature conditions. Zeta-potential is used to characterize nanoparticles surface charge, obtaining information about their stability and surface interaction with other molecules. In this review, we focus on nanoparticle characterization and application in infection, cancer and cardiovascular diseases.

Protein-Based Delivery Systems for the Nanoencapsulation of Food Ingredients

Many proteins possess functional attributes that make them suitable for the encapsulation of bioactive agents, such as nutraceuticals and pharmaceuticals. This article reviews the state of the art of protein-based nanoencapsulation approaches. The physicochemical principles underlying the major techniques for the fabrication of nanoparticles, nanogels, and nanofibers from animal, botanical, and recombinant proteins are described. Protein modification approaches that can be used to extend their functionality in these nanocarrier systems are also described, including chemical, physical, and enzymatic treatments. The encapsulation, retention, protection, and release of bioactive agents in different protein-based nanocarriers are discussed. Finally, some of the major challenges in the design and fabrication of protein-based delivery systems are highlighted.

Peptide and protein nanoparticle conjugates: versatile platforms for biomedical applications

Peptide- and protein-nanoparticle conjugates have emerged as powerful tools for biomedical applications, enabling the treatment, diagnosis, and prevention of disease. In this review, we focus on the key roles played by peptides and proteins in improving, controlling, and defining the performance of nanotechnologies. Within this framework, we provide a comprehensive overview of the key sequences and structures utilised to provide biological and physical stability to nano-constructs, direct particles to their target and influence their cellular and tissue distribution, induce and control biological responses, and form polypeptide self-assembled nanoparticles. In doing so, we highlight the great advances made by the field, as well as the challenges still faced in achieving the clinical translation of peptide- and protein-functionalised nano-drug delivery vehicles, imaging species, and active therapeutics.

Copaiba oil enhances in vitro/in vivo cutaneous permeability and in vivo anti-inflammatory effect of celecoxib

OBJECTIVES

The aim of this article was to use copaiba oil (C.O) to improve skin permeability and topical anti-inflammatory activity of celecoxib (Cxb).

METHODS

Formulations containing C.O (1-50%) were associated with Cxb (2%). In vitro skin permeability studies were conducted using porcine ear skin. Histological analysis of the hairless mice skin samples after application of formulations was achieved with the routine haematoxylin/eosin technique. The anti-inflammatory activity was assessed using the AA-induced ear oedema mice model.

KEY FINDINGS

The formulation containing 25% C.O promoted the highest levels of in vitro Cxb permeation through pig ear skin, retention in the stratum corneum (SC) and epidermis/dermis of pig ear skin in vitro (~5-fold) and hairless mice skin in vivo (~2.0-fold), as compared with the control formulation. At 25%, C.O caused SC disorganization and increased cell infiltration and induced angiogenesis without clear signs of skin irritation. The formulation added to 25% C.O as adjuvant inhibited ear oedema and protein extravasation by 77.51 and 89.7%, respectively, and that it was, respectively, 2.0- and 3.4-fold more efficient than the commercial diethylammonium diclofenac cream gel to suppress these inflammatory parameters.

CONCLUSIONS

25% C.O is a potential penetration enhancer for lipophilic drugs like Cxb that can improve cutaneous drug penetration and its anti-inflammatory activity.