Cervical pedicle screw guiding jig, an innovative solution

Anatomical and Imaging Study on the Optimum Entry Point and Trajectory for Anterior Transpedicular Root Screw Placement into the Lower Cervical Spine

Objective

To study the optimum entry point and trajectory for anterior transpedicular root screw (ATPRS) placement into the lower cervical spine (LCS), so as to provide a basis for clinical application.

Methods

A retrospective analysis of cervical CT images of patients who underwent cervical CT examination in the Spinal Surgery of Ningbo No. 6 Hospital from January 2020 to August 2021 was conducted. The data were obtained and modeled. On the coronal plane, the vertebral body (VB) between the anterior midline of cervical vertebral segments C_3-7 and the left P line (by drawing the line parallel to the anterior midline of the VB at the intersection of the anterior edge of the Luschka's joint and the upper endplate) was equally divided into 9 zones (a-i). The ideal entry point and path of cervical ATPRS were designed and recorded. Additionally, 7 cadaveric specimens were selected, and the screw placement parameters were regenerated according to the above methods for screw placement.

Results

Zone i of each segment, with the longest screw length, was the best area for screw placement. In all patients, the horizontal angles of vertebrae C_3-7 in zones a, d, and g, zones b, e, and h, and zones c, f, and i showed a gradually decreasing trend. The sagittal angle range of C_3-7 in all patients showed a gradually increasing trend in zones a-c, d-f, and g-i. The distance from the anterior midline of C_3-7 to the P line increased in all patients, and the distance was longer in males than in females, with statistical significance. Pedicle screws were successfully inserted in all the 7 cadaveric specimens.

Conclusions

ATPRS placement can be used for LCS internal fixation, and the precise screw placement parameters can be simulated by the software, which provides theoretical basis for its future clinical application.

Patient-Matched 3-D-Printed Guides for the Insertion of Cervical Pedicle Screws in Tumor Surgery

Background

Pedicle screw fixation in the cervical spine provides biomechanical advantages compared to other stabilization techniques. However, pedicle screw insertion in this area is challenging due to the anatomical conditions with a high risk of breaching the small pedicles and violating the vertebral artery or neural structures. Today, several techniques to facilitate screw insertion and to make the procedure safer are used. 3-D-printed patient-matched guides based on a CT reconstruction are a helpful technique which allows to reduce operation time and to improve the safety of pedicle screw insertion at the cervical spine.

Cases

3-D-printed patient-matched drill guides based on a CT scan with a 3-D reconstruction of the spine were used in two challenging cervical spine surgical tumor cases to facilitate the implantation of the pedicle screws. The screw position was controlled postoperatively by means of the routinely performed CT scan.

Results

Postoperative imaging (conventional radiographs and CT scan) revealed the correct position of the pedicle screws. The time needed for screw insertion was short, and the need for intraoperative fluoroscopy could be reduced. There was no intra- or postoperative complication related to the pedicle screw implantation. Both tumors could be removed completely.

Conclusion

These preliminary results show that 3-D-printed patient-specific guides are a promising tool to support and facilitate the implantation of cervical pedicle screws. The time needed for insertion is short, and intraoperative fluoroscopy time can be reduced. This technique allows for both a meticulous preoperative planning and a correct and therefore safe intraoperative positioning of cervical spine pedicle screws.

Are the common sterilization methods completely effective for our in-house 3D printed biomodels and surgical guides?

INTRODUCTION

In-hospital 3D printing is being implemented in orthopaedic departments worldwide, being used for additive manufacturing of fracture models (or even surgical guides) which are sterilized and used in the operating room. However, to save time and material, prints are nearly hollow, while 3D printers are placed in non-sterile rooms. The aim of our study is to evaluate whether common sterilization methods can sterilize the inside of the pieces, which would be of utmost importance in case a model breaks during a surgical intervention.

MATERIAL AND METHOD

A total of 24 cylinders were designed and printed with a 3D printer in Polylactic Acid (PLA) with an infill density of 12%. Manufacturing was paused when 60% of the print was reached and 20 of the cylinders were inoculated with 0.4 mL of a suspension of S epidermidis ATTCC 1228 in saline solution at turbidity 1 McFarland. Printing was resumed, being all the pieces completely sealed with the inoculum inside. Posteriorly, 4 groups were made according to the chosen sterilization method: Ethylene Oxide (EtO), Gas Plasma, Steam Heat or non-sterilized (positive control). Each group included 5 contaminated cylinders and 1 non-contaminated cylinder as a negative control. After sterilization, the inside of the cylinders was cultured during 7 days.

RESULTS

We observed bacterial growth of just a few Forming Colony Units (FCU) in 4 out of 5 positive controls and in 2 out of 5 contaminated cylinders sterilized with Gas Plasma. We could not assess any bacterial growth in any of the EtO or Steam Heat samples or in any of the negative controls. Pieces sterilized under Steam Heat resulted completely deformed.

CONCLUSIONS

High temperatures reached during the procedure of additive manufacturing can decrease the bacterial load of the biomodels. However, there is a potential risk of contamination during the procedure. We recommend sterilization with EtO for in-hospital 3D-printed PLA hollow biomodels or guides. Otherwise, in case of using Gas Plasma, an infill of 100% should be applied.

Application of Artificial Intelligence in Medicine: An Overview

Artificial intelligence (AI) is a new technical discipline that uses computer technology to research and develop the theory, method, technique, and application system for the simulation, extension, and expansion of human intelligence. With the assistance of new AI technology, the traditional medical environment has changed a lot. For example, a patient's diagnosis based on radiological, pathological, endoscopic, ultrasonographic, and biochemical examinations has been effectively promoted with a higher accuracy and a lower human workload. The medical treatments during the perioperative period, including the preoperative preparation, surgical period, and postoperative recovery period, have been significantly enhanced with better surgical effects. In addition, AI technology has also played a crucial role in medical drug production, medical management, and medical education, taking them into a new direction. The purpose of this review is to introduce the application of AI in medicine and to provide an outlook of future trends.

Anatomic techniques for cervical pedicle screw placement

Instrumentation of the cervical spine with cervical pedicle screws (CPS) is beneficial in patients with various types of spinal pathology. Despite posing greater technical challenges, CPS instrumentation confers better fixation outcomes when compared to lateral mass screws. While developments in technology have augmented the accuracy of CPS insertion, mastery in freehand CPS insertion allows the aforementioned technologies to reach their full potential in improving patient outcomes. The aim of this article is to discuss freehand CPS insertion techniques as established in the current literature while sharing our experience in this context. A comprehensive literature search was performed using the following electronic databases: PubMed, Medline, and EMBASE. Full-text articles focusing on clinical studies with description of freehand techniques were included. Articles which were on cadaveric studies, drill jig, navigation or robotic technology were excluded. Thirteen primary references comprising 1,480 patients were included in this review. Majority of studies reported utilizing the cranial margin of lamina for C2 level as a landmark for entry point, as well as lateral to centre of the articular mass, and just medial to the lateral border of the superior articular process for C3-7 levels. Method of tracking and facilitation of trajectory was reported in multiple studies, with use of instruments ranging from curved pedicle probes to high-speed burrs. Limited studies reported specific trajectories of CPS insertion. Most studies noted testing pedicle wall integrity at various checkpoints, with pedicle screw repositioning or conversion to lateral screw mass following detection of perforation or screw malpositioning. Success in CPS insertion rests on meticulous preoperative planning to identify the ideal screw entry point and trajectory. Patient-specific drill jigs, navigation and robotic technologies, while beneficial to progress in the field of cervical spine surgery and patient outcomes, should serve primarily to augment good expertise in freehand CPS insertion technique.

Techniques of cervical pedicle screw insertion in lower cervical spine - A review

Cervical pedicle screws (CPS) have been used for stabilization of lower cervical spine since its first description by Abumi et al., in 1994^, but the usage has been limited due to the feared complications. Cadaveric studies have discouraged use of CPS in lower cervical spine due to high misplacement rates. On the contrary, clinical studies have shown limited complications due to screw misplacements and have highlighted the benefits of CPS with its superior biomechanical strength. Therefore surgeons have always tried to find a reliable, reproducible and safe CPS insertion technique to expand the usage of CPS with minimal complications. As of today Abumi et al. technique is the most popular free-hand technique used by surgeons, though many modifications have evolved to make the CPS insertions more safe and reproducible. The free hand technique should be considered as the cornerstone technique for CPS insertion and the navigation tools are essential to improve the safety of CPS in complex surgeries with altered cervical anatomy. The present review brings together the literature on the various aspects of cervical pedicle anatomy, the free-hand screw insertion techniques with their modifications, the screw misplacement rates and complications.