Functionality of the storage proteins in gluten-free cereals and pseudocereals in dough systems

In vitro protein digestibility of gluten-free climate-smart cowpea-based pasta

Nutritional optimisation of staple food such as pasta with flours from climate-smart crops (i.e. resilient to climatic hazards and requiring minimal inputs) is in line with actual environmental and nutritional challenges. Although the quantity of protein is important, the quality through protein digestibility is essential. The aim of this work was to assess the protein digestibility of four gluten-free climate-smart pasta all based on cowpea flour with or without the addition of teff and/or amaranth leaf flour(s) using two static in vitro methods: static Infogest digestion protocol and Megazyme® enzymatic kit. The effect of both gluten absence and the high fiber content on the in vitro protein digestibility was investigated through the use of three durum wheat semolina pasta controls with increasing fiber content. Statistical analysis were made through ANOVA with p < 0.05. Despite structural differences, induced by protein origin and the disruption of the protein network by fibers, there was no significant difference in in vitro protein digestibility between cowpea-based and traditional durum wheat semolina pasta. Protein quality was then approached with the measurement of the in vitro Protein Digestibility Corrected Amino Acid Score (i-PDCAAS) for the two methodologies. Thanks to their balanced essential amino acid profile, cowpea-based pasta demonstrated i-PDCAAS that was twice as high as that of wheat-based pasta, as determined by both by the Infogest (68-86 versus 35-44) and enzymatic kit (99-104 versus 49-56) methods. In addition, for the first time both methodologies were compared and Infogest protocol appeared more suitable for more detailed studies.

Effects of zein extractions on the structural properties of SPI-zein composite gels: Implications for gluten-free plant-based products

The growing global interest in physical and environmental health has led to the development of plant-based products. Although soy protein and wheat gluten are commonly utilized, concerns regarding gluten-related health issues have driven exploration into alternative proteins. Zein has emerged as a promising option. This research investigated the impact of extraction methods on zein characteristics and the structures of SPI-zein composite gels. Different extraction methods yielded zein with protein contents ranging from 48.12 % to 64.34 %. Ethanol-extracted Z1 and Z3, obtained at different pH conditions, exhibited zeta potential of -3.25 and 5.43 mV, respectively. They displayed similar characteristics to commercial zein and interacted comparably in composite gels. Conversely, alkaline-extracted Z2 had a zeta potential of -2.37 mV and formed distinct gels when combined with SPI. These results indicated that extraction methods influence zein behaviour in composite gels, offering possibilities for tailored formulations and expanding zein's applications, particularly in gluten-free plant-based products.

Physicochemical, calorimetric and texture profile characteristics of various gluten-free flours

It is important to understand how the composition and structure of proteins from other flours differ from proteins in wheat, in order to have a better option to substitute gluten products with gluten-free food products. The aim of this study was the characterization of gluten-free flours and comparison of their rheological and calorimetric properties against wheat flour, for its use as gluten-free alternative. Chemical composition analysis, water solubility index (WSI), water absorption index (WAI), texture and calorimetric profile were determined. The closest WAI to wheat flour (1.45 g gel/g sample) was corn flour (2.41 g gel/g sample), while the WSI of chickpea flour was 5.51% approaching that of wheat flour of 5.88%. The hardness and adhesiveness values closest to wheat (1.65 kgf and 0.03 mJ) were amaranth flour with 0.85 kgf and 0.01 mJ, respectively. The phenolic content and antioxidant capacity were higher in the corn and bean flours with 244.4 mg GAE/100 g, 148 mg GAE/100 g and 190 mg AAE/100 g and 170 mg AAE/100 g, respectively. The combination of these non-conventional flours can be an innovative source of gluten-free formulas.

Proteins from Legumes, Cereals, and Pseudo-Cereals: Composition, Modification, Bioactivities, and Applications

This review presents a comprehensive analysis of plant-based proteins from soybeans, pulses, cereals, and pseudo-cereals by examining their structural properties, modification techniques, bioactivities, and applicability in food systems. It addresses the critical need for a proper utilization strategy of proteins from various plant sources amidst the rising environmental footprint of animal protein production. The inherent composition diversity among plant proteins, their nutritional profiles, digestibility, environmental impacts, and consumer acceptance are compared. The innovative modification techniques to enhance the functional properties of plant proteins are also discussed. The review also investigates the bioactive properties of plant proteins, including their antioxidant, antimicrobial, and antitumoral activities, and their role in developing meat analogs, dairy alternatives, baked goods, and 3D-printed foods. It underscores the consideration parameters of using plant proteins as sustainable, nutritious, and functional ingredients and advocates for research to overcome sensory and functional challenges for improved consumer acceptance and marketability.

Glycemic Response in Nonhuman Primates Fed Gluten-Free Rice Cakes Enriched with Soy, Pea, or Rice Protein and Its Correlation with Nutrient Composition

Celiac disease (CD) is a chronic disease caused by the consumption of gluten foods and is closely related to type 1 diabetes (T1D). Adherence to a gluten-free (GF) diet is the cornerstone of treating CD, and certain plant proteins added to GF foods affect blood glucose to varying degrees. The aim of this study was to analyze and compare the changes in glycemic index (GI) and incremental area under the postprandial glucose tolerance curve (IAUC) of various foods through consumption of GF foods supplemented with certain plant proteins in non-human primates. The test foods were GF rice cakes with 5%, 10%, and 15% added single plant proteins (rice protein, soy protein, and pea protein) mixed with rice flour, as well as 5%, 10%, and 15% gluten rice cakes, and rice flour alone, for a total of 13 food items, and 12 healthy cynomolgus monkeys were examined for their glucose levels in the blood after fasting and after eating each test food (50 g) for 15, 30, 45, 60, 90, and 120 min after fasting and eating each test food. Fingertip blood glucose levels were measured, and the nutrient content of each food, including protein, fat, starch, ash, and amino acids, was examined. All foods tested had a low GI (<50) when analyzed using one-way ANOVA and nonparametric tests. Postprandial IAUC was significantly lower (p < 0.05) for GF rice cakes with 15% pea protein (499.81 ± 34.46) compared to GF rice cakes with 5% pea protein (542.19 ± 38.78), 15% soy protein (572.94 ± 72.74), and 15% rice protein (530.50 ± 14.65), and GF rice cakes with 15% wheat bran protein (533.19 ± 34.89). A multiple regression analysis showed that glycine was negatively associated with IAUC in GF rice cakes with 5%, 10%, and 15% pea protein added (p = 0.0031 < 0.01). Fat was negatively correlated with IAUC in GF rice cakes supplemented with 5%, 10%, and 15% soy protein (p = 0.0024 < 0.01). In this study, GF rice cakes made with added pea protein were superior to other gluten and GF rice cakes and had a small effect on postprandial glucose.

Nutritional contributions and processability of pasta made from climate-smart, sustainable crops: A critical review

Total or partial replacement of traditional durum wheat semolina (DWS) by alternative flours, such as legumes or wholegrain cereals in pasta improves their nutritional quality and can make them interesting vector for fortification. Climate-smart gluten-free (C-GF) flours, such as legumes (bambara groundnut, chickpea, cowpea, faba bean, and pigeon pea), some cereals (amaranth, teff, millet, and sorghum), and tubers (cassava and orange fleshed sweet potato), are of high interest to face ecological transition and develop sustainable food systems. In this review, an overview and a critical analysis of their nutritional potential for pasta production and processing conditions are undertaken. Special emphasis is given to understanding the influence of formulation and processing on techno-functional and nutritional (starch and protein digestibility) properties. Globally C-GF flours improve pasta protein quantity and quality, fibers, and micronutrients contents while keeping a low glycemic index and increasing protein digestibility. However, their use introduces anti-nutritional factors and could lead to the alteration of their techno-functional properties (higher cooking losses, lower firmness, and variability in color in comparison to classical DWS pasta). Nevertheless, these alternative pasta remain more interesting in terms of nutritional and techno-functional quality than traditional maize and rice-based gluten free pasta.

Determination and Analysis of Composition, Structure, and Properties of Teff Protein Fractions

To develop teff-based food products with acceptable quality, the composition, structure, and properties of teff protein fractions should be better understood. In this study, teff proteins were extracted, and their protein composition, structure, and properties were calculated, analyzed, and compared with those of wheat gliadin and glutenin. Results showed that teff flour contained 9.07% protein, with prolamin as its main protein fraction. The isoelectric points of albumin, globulin, prolamin, and glutelin were at pH 3.6, 3.0, 4.4, and 3.4, respectively. Teff prolamin and glutelin showed a significant difference in amino acids and free energy of hydration compared to wheat gliadins and glutenins. The protein chain length of teff prolamins was smaller than that of wheat gliadins, and teff glutelins lacked high molecular weight glutelin subunits. Teff prolamin had the highest α-helices content (27.08%), whereas no random coils were determined, which is different from wheat gliadin. Teff glutelin had a lower content of β-turn than wheat glutenin, and no α-helices were determined in it. Teff prolamin and glutelin had lower disulfide bond content and surface hydrophobicity. Teff prolamin had significantly higher thermal stability than wheat gliadin, whereas the thermal stability of teff glutelin was significantly lower than that of wheat glutenin.

Effects of quinoa flour (Chenopodium Quinoa Willd) substitution on wheat flour characteristics

Quinoa is a pseudo-cereal with great nutritional and functional qualities, serving as an excellent substitution to develop quinoa-containing foods. This study aimed to explore the influence of quinoa flour substitution on quality characteristics of wheat flour (WF). WF was substituted with different level of quinoa core flour, ground quinoa whole flour and recombined quinoa whole flour. Increasing levels of quinoa flour in WF declined dough swelling index, while increased falling number of composite flours. Besides, quinoa flour substitution considerably decreased the chemical forces of gluten in composite flours. The proportions α-helix and β-sheets reduced, while the random coil proportion increased in gluten secondary structure. SEM images revealed that the gluten network structure was severely damaged. Our findings indicated that substitution of WF with quinoa flours was promising to be developed as an ingredient for food products.

Arabinoxylan supplemented bread: From extraction of fibers to effect of baking, digestion, and fermentation

The intake of dietary fibers is related with important benefits for human health. We produced two different arabinoxylan fibers with (FAX) and without ferulic acid linked (AX), 12.5 and 0.1 mg g^-1 of ferulic acid respectively, by subcritical water extraction of wheat bran. Both FAX and AX fibers were used as supplement in bread production, while non-supplemented bread was used as control. Through an enzymatic deconstruction process we investigated the effect of bread making on the fibers, the preservation of their molecular structure (A/X ratio of 0.13 and Mw of 10⁵ Da) and the interaction with other macromolecules in the bread. By mimicking the upper track digestion, we could confirm the non-digestability of the fibers and we used them for the fermentation with B. ovatus and B. adolescentis. The presence of AX fibers during fermentation showed specific substrate adaptation by the probiotic bacteria in correlation with its potential prebiotic effect.

Nutritional and bioactive characteristics of buckwheat, and its potential for developing gluten-free products: An updated overview

In the present era, food scientists are concerned about exploiting functional crops with nutraceutical properties. Buckwheat is one of the functional pseudocereals with nutraceutical components used in the treatment of health-related diseases, malnutrition, and celiac diseases. As a preferred diet as a gluten-free product for celiac diseases, buckwheat is a good source of nutrients, bioactive components, phytochemicals, and antioxidants. The general characteristics and better nutritional profile of buckwheat than other cereal family crops were highlighted by previous investigations. In buckwheats, bioactive components like peptides, flavonoids, phenolic acids, d-fagomine, fagopyritols, and fagopyrins are posing significant health benefits. This study highlights the current knowledge about buckwheat and its characteristics, nutritional constituents, bioactive components, and their potential for developing gluten-free products to target celiac people (1.4% of the world population) and other health-related diseases.

Incorporation of Buckwheat Flour at Different Particle Sizes and Distinctive Doses in Wheat Flour to Manufacture an Improved Wheat Bread

This study explored the effect of substituting wheat flour (WF) with distinctive optimal doses of buckwheat flour (BF) corresponding to large, medium, and small particle sizes (PS), previously established based on an optimization process, on composite flour characteristics, dough rheology, and bread quality. The optimal dose for each PS was established in a previous study. The highest value for protein, lipid, mineral, and amino acids was found in the optimal composite flour with medium PS, with significant differences between those with large and small PS. The addition of BF in WF at doses corresponding to each fraction provides optimum rheological properties, with the large and medium PS providing higher performance compared to the small one. The same tendency was observed for volume and texture parameters of bread made from optimal composite flours with medium and large PS, respectively, but the crust and crumb lightness presented lower values than bread with small PS. Regarding the bread nutritional profile, the sample with medium PS possessed the highest protein, lipid, and ash content. Compared to the wheat bread, a considerably higher amino acid content, up to 21.22%, was found in bread made from optimal composite flours with medium and small PS, respectively. The bread samples with medium and large PS, respectively were superior in minerals, the value being up to 2.63 times higher compared to the control. Sensory characteristics results revealed that the bread samples containing 9.13% large and 10.57% medium PS were the most preferred by panelists. The results of this research make an important base to suitably develop wheat-buckwheat bread applications in the future.

Bioactive, Mineral and Antioxidative Properties of Gluten-Free Chicory Supplemented Snack: Impact of Processing Conditions

This study aimed to investigate the impact of chicory root addition (20-40%) and extrusion conditions (moisture content from 16.3 to 22.5%, and screw speed from 500 to 900 rpm) on bioactive compounds content (inulin, sesquiterpene lactones, and polyphenols) of gluten-free rice snacks. Chicory root is considered a potential carrier of food bioactives, while extrusion may produce a wide range of functional snack products. The mineral profiles were determined in all of the obtained extrudates in terms of Na, K, Ca, Mg, Fe, Mn, Zn, and Cu contents, while antioxidative activity was established through reducing capacity, DPPH (2,2-diphenyl-1-picrylhydrazyl) and ABTS (2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) tests. Chicory root addition contributed to the improvement of bioactive compounds and mineral contents, as well as antioxidative activities in all of the investigated extrudates in comparison to the pure-rice control sample. An increase in moisture content raised sesquiterpene lactones and minerals, while high screw speeds positively affected polyphenols content. The achieved results showed the important impact of the extrusion conditions on the investigated parameters and promoted chicory root as an attractive food ingredient in gluten-free snack products with high bioactive value.

Yogurt and curd cheese as alternative ingredients to improve the gluten-free breadmaking

Gluten-free products are on today's agenda since they represent the most hastily growing segments in the market, representing an opportunity for food companies. Nevertheless, it is well-known that gluten is a crucial network structure in the wheat dough systems, which accounts for the overall desired technological features of the final bakery goods. Therefore, the absence of gluten negatively affects the characteristics of gluten-free bread, triggering a technological challenge in the manufacturing of products with resembled characteristics of wheat-derived counterparts. The search for new protein sources has been studied as an approach to circumvent the technological drawbacks of gluten removal. Dairy proteins are functional molecules that can likely be capable of building up a protein-network structure so that it would improve the technological properties of gluten-free products. In the present work, different levels of dairy product addition (10 and 20%, w/w) were used to supplement the gluten-free bread formulas, and the impact on dough rheology properties was well correlated to the bread technological quality parameters obtained. Linear correlations (R 2 > 0.904) between steady shear (viscosity) and oscillatory (elastic and viscous moduli) values of the dough rheology with bread quality parameters (volume and firmness) were obtained, suggesting that the bread quality improvements are proportional to the levels of dairies added. Likewise, strong linear correlations (R 2 > -0.910) between pasting properties parameters and bread staling rate supported the hypothesis that the dairies tested have a high potential to generate bread with a low staling rate, which is an advantage to extending the shelf-life. In short, results confirmed that the addition of both dairy products, as bakery ingredients, can constitute a technological advantage to improve the overall gluten-free bread quality.

Gluten-free bakery products: Ingredients and processes

There is an increasing demand for gluten-free products around the world because certain groups of people, which have increased in the last decades, need to eliminate gluten from their diet. A growing number of people consider gluten-free products to be healthier. However, making gluten-free products such as bread is a technological challenge due to the important role of the gluten network in their development. However, other products, such as cakes and cookies usually made with wheat flour, can easily be made with gluten-free starches or flours since gluten does not play an essential role in their production. To replace wheat flour in these elaborations it is necessary to resort to gluten-free starches and/or flours and to gluten substitutes. Additionally, it can be convenient to incorporate other ingredients such as proteins, fibers, sugars or oils, as well as to modify their quantities in wheat flour formulations. Regarding gluten-free flours, it will also be necessary to know the parameters that influence their functionality in order to obtain regular products. These problems have originated a lower availability of gluten-free products which have a worse texture and are less tasty and more expensive than their homologues with gluten. These problems have been partially solved thanks to research on these types of products, their ingredients and their production methods. In recent years, studies about the nutritional improvement of these products have increased. This chapter delves into the main ingredients used in the production of gluten-free products, the processes for making gluten-free breads, cakes and cookies, and the nutritional quality of these products.

Methods for the Modification and Evaluation of Cereal Proteins for the Substitution of Wheat Gluten in Dough Systems

The substitution of wheat gluten in the food industry is a relevant research area because the only known treatment for celiac disease is abstinence from this protein complex. The use of gluten-free cereals in dough systems has demonstrated that the viscoelastic properties of gluten cannot be achieved without the modification of the protein fraction. The quality of the final product is determined by the ability of the modification to form a matrix similar to that of gluten and to reach this, different methods have been proposed and tested. These procedures can be classified into four main types: chemical, enzymatic, physical, and genetic. This article provides a comprehensive review of the most recent research done in protein modification of cereal and pseudocereals for gluten substitution. The reported effects and methodologies for studying the changes made with each type of modification are described; also, some opportunity areas for future works regarding the study of the effect of protein modifications on gluten-free products are presented.

Effects of multi-frequency ultrasound on physicochemical properties, structural characteristics of gluten protein and the quality of noodle

In this study, the influence of multi-frequency ultrasound irradiation on the functional properties and structural characteristics of gluten, as well as the textural and cooking characteristics of the noodles were investigated. Results showed that the textural and cooking characteristics of noodles that contain less gluten pretreated by multi-frequency ultrasonic were ultrasonic frequency dependent. Moreover, the noodles that contain a smaller amount of sonicated gluten could achieve the textural and cooking quality of commercial noodles. There was no significant difference in the cooking and texture characteristics between commercial noodles and noodles with 12%, 11%, and 10% gluten pretreated by single-frequency (40 kHz), dual-frequency (28/40 kHz), and triple-frequency sonication (28/40/80 kHz), respectively. Furthermore, the cavitation efficiency of triple-frequency ultrasound was greater than that of dual-frequency and single-frequency. As the number of ultrasonic frequencies increased, the solubility, water holding capacity and oil holding capacity of gluten increased significantly (p < 0.05), and the particle size was reduced from 197.93 ± 5.28 nm to 110.15 ± 2.61 nm. Furthermore, compared to the control group (untreated), the UV absorption and fluorescence intensity of the gluten treated by multi-frequency ultrasonication increased. The surface hydrophobicity of gluten increased from 8159.1 ± 195.87 (untreated) to 11621.5 ± 379.72 (28/40/80 kHz). Raman spectroscopy showed that the α-helix content of all sonicated gluten protein samples decreased after sonication, while the β-sheet and β-turn content increased, and tryptophan and tyrosine residues were exposed. Through scanning electron microscope (SEM) analysis, the gluten protein network structure after ultrasonic treatment was loose, and the pore size of the gluten protein network increased from about 10 μm (untreated) to about 26 μm (28/40/80 kHz). This work elucidated the effect of ultrasonic frequency on the performance of gluten, indicating that with increasing frequency combination increases, the ultrasound effect became more pronounced and protein unfolding increased, thereby impacting the functional properties and the quality of the final product. This study provided a theoretical basis for the application of multi-frequency ultrasound technology in the modification of gluten protein and noodle processing.

Pseudocereal grains: Nutritional value, health benefits and current applications for the development of gluten-free foods

Nowadays, consumers are more conscious of the environmental and nutritional benefits of foods. Pseudocereals grains, edible seeds belonging to dicotyledonous plant species, are becoming a current trend in human diets as gluten-free (GF) grains with excellent nutritional and nutraceutical value. Pseudocereals are a good source of starch, fiber, proteins, minerals, vitamins, and phytochemicals such as saponins, polyphenols, phytosterols, phytosteroids, and betalains with potential health benefits. The present review aims to summarize the nutritional quality and phytochemical profile of the three main pseudocereal grains: quinoa, amaranth and buckwheat. In addition, current evidence about their health benefits in animal models and human studies is also provided in detail. Based on the accumulating research supporting the inclusion of pseudocereals grains in the diet of celiac persons, this review discusses the recent advances in their application for the development of new GF products. Future directions for a wider cultivation and commercial exploitation of these crops are also highlighted.

Factors Influencing Zein-Whole Sorghum Flour Dough Formation and Bread Quality

Zein is known to able to form viscoelastic dough with wheat-like properties under certain conditions. Several studies have been conducted to explain the mechanism behind this ability and to improve the functionality and end-use quality of zein-based dough systems. However, most of this research has been conducted using zein in combination with isolated starches or high-starch flours. To investigate the production of additional zein-whole sorghum flour breads, experiments were conducted to determine factors impacting zein-whole sorghum flour dough and bread quality. Optimizing water levels, using defatted zein and/or sorghum flour, and increasing zein content in dough formulas were investigated as initial formulation steps. Of these factors, increasing zein content from 20% to 30% (flour weight basis) had the greatest impact, resulting in stronger zein-based dough and improved bread quality. Additives and zein treatments shown to impact zein functionality were then investigated for their effect of zein-whole sorghum flour breads. Mixing zein and whole sorghum flour with 0.5% hydrogen peroxide, 5% ethanol, or 3% hydroxypropyl methylcellulose resulted in improved dough strength and bread quality. Breads made from whole white sorghum flour had improved quality compared to zein-based breads made with black or high-tannin whole sorghum flour. PRACTICAL APPLICATION: Zein is known to be able to form wheat-like dough when mixed under the right conditions. Most of the research on zein-based dough and food products has used high-starch flours. This project investigated optimizing the production of zein-whole sorghum flour dough and bread as an alternative. Increasing the zein content in the formula and using additives including ethanol and HPMC produced breads from zein-whole sorghum flour that were like those made with zein and pure starch.

Structural Basis of Resistant Starch (RS) in Bread: Natural and Commercial Alternatives

Bread is categorized as having a high amount of rapidly digested starch that may result in a rapid increase in postprandial blood glucose and, therefore, poor health outcomes. This is mostly the result of the complete gelatinization that starch undergoes during baking. The inclusion of resistant starch (RS) ingredients in bread formulas is gaining prominence, especially with the current positive health outcomes attributed to RS and the apparition of novel RS ingredients in the market. However, many RS ingredients contain RS structures that do not resist baking and, therefore, are not suitable to result in a meaningful RS increase in the final product. In this review, the structural factors for the resistance to digestion and hydrothermal processing of RS ingredients are reviewed, and the definition of each RS subtype is expanded to account for novel non-digestible structures recently reported. Moreover, the current in vitro digestion methods used to measure RS content are critically discussed with a view of highlighting the importance of having a harmonized method to determine the optimum RS type and inclusion levels for bread-making.

Dynamic viscoelasticity of protease-treated rice batters for gluten-free rice bread making

Papain (cysteine protease), subtilisin (Protin SD-AY10, serine protease), and bacillolysin (Protin SD-NY10, metallo protease) increased the specific volume of gluten-free rice breads by 19-63% compared to untreated bread. In contrast, Newlase F (aspartyl protease) did not expand the volume of the rice bread. In a rheological analysis, the viscoelastic properties of the gluten-free rice batters also depended on the protease categories. Principal component analysis (PCA) analysis suggested that the storage and loss moduli (G' and G″, respectively) at 35 °C, and the maximum values of G' and G″, were important factors in the volume expansion. Judging from the PCA of the viscoelastic parameters of the rice batters, papain and Protin SD-AY10 improved the viscoelasticity for gluten-free rice bread making, and Protin SD-NY effectively expanded the gluten-free rice bread. The rheological properties differed between Protin SD-NY and the other protease treatments.

Proteins of Amaranth (Amaranthus spp.), Buckwheat (Fagopyrum spp.), and Quinoa (Chenopodium spp.): A Food Science and Technology Perspective

There is currently much interest in the use of pseudocereals for developing nutritious food products. Amaranth, buckwheat, and quinoa are the 3 major pseudocereals in terms of world production. They contain high levels of starch, proteins, dietary fiber, minerals, vitamins, and other bioactives. Their proteins have well-balanced amino acid compositions, are more sustainable than those from animal sources, and can be consumed by patients suffering from celiac disease. While pseudocereal proteins mainly consist of albumins and globulins, the predominant cereal proteins are prolamins and glutelins. We here discuss the structural properties, denaturation and aggregation behaviors, and solubility, as well as the foaming, emulsifying, and gelling properties of amaranth, buckwheat, and quinoa proteins. In addition, the technological impact of incorporating amaranth, buckwheat, and quinoa in bread, pasta, noodles, and cookies and strategies to affect the functionality of pseudocereal flour proteins are discussed. Literature concerning pseudocereal proteins is often inconsistent and contradictory, particularly in the methods used to obtain globulins and glutelins. Also, most studies on protein denaturation and techno-functional properties have focused on isolates obtained by alkaline extraction and subsequent isoelectric precipitation at acidic pH, even if the outcome of such studies is not necessarily relevant for understanding the role of the native proteins in food processing. Finally, even though establishing in-depth structure-function relationships seems challenging, it would undoubtedly be of major help in the design of tailor-made pseudocereal foods.