Evaluation of the rheological properties of dough and quality of bread made with the flour obtained from old cultivars and modern breeding lines of spelt (Triticum aestivum ssp. spelta)

Development and Characterization of New Plant-Based Ice Cream Assortments Using Oleogels as Fat Source

The objective of this study was to develop candelilla wax oleogels with hemp seed oil and olive oil and use them as a fat source in the development of new plant-based ice cream assortments. Oleogels were structured with 3 and 9% candelilla wax and characterized by oil-binding capacity, peroxide value and color parameters. The oil-binding capacities of 9% wax oleogels were significantly higher than those of 3% wax oleogels, while peroxide values of oleogels decrease with increasing wax dosage. All oleogel samples are yellow-green due to the pigments present in the oils and candelilla wax. Physicochemical (pH, titratable acidity, soluble solids, fat, protein) and rheological (viscosity and viscoelastic modulus) parameters of plant-based ice cream mixes with oleogels were determined. Also, sensory attributes and texture parameters were investigated. The results showed that titratable acidity and fat content of plant-based ice cream samples increased with increasing wax percentage, while pH, soluble solids and protein values are more influenced by the type of plant milk used. The plant-based ice cream sample with spelt milk, hemp oil and 9% candelilla wax received the highest overall acceptability score. The hardness of the plant-based ice cream samples increased as the percentage of candelilla wax added increased.

Selected Physicochemical, Thermal, and Rheological Properties of Barley Starch Depending on the Type of Soil and Fertilization with Ash from Biomass Combustion

The following study analyzed the impact of fertilizing barley with fly ash from biomass combustion grown on two types of soil, Haplic Luvisol (HL) and Gleyic Chernozem (GC), on the properties of starch. The experiment was conducted in 2019 (A) and 2020 (B), and barley was fertilized with ash doses (D1-D6) differing in mineral content. In the tested barley starch samples, the amylose content, the clarity of the paste, and the content of selected minerals were determined. The thermodynamic characteristics of gelatinization and retrogradation were determined using the DSC method. Pasting characteristics, flow curves, and viscoelastic properties of starch pastes were performed. Starches differed in amylose content and paste clarity. The highest gelatinization and retrogradation enthalpy (ΔHG and ΔHR) values were recorded for samples GCD1A and HLD5B. None of the tested factors significantly affected the pasting temperature (PT), but they had a significant impact on the remaining parameters of the pasting characteristics. The average PT value of barley starches was 90.9 °C. However, GCD2A starch had the highest maximum viscosity and the highest rheological stability during heating. GCD2A paste was characterized by the highest apparent viscosity. It was shown that all pastes showed non-Newtonian flow and shear-thinning and had a predominance of elastic features over viscous ones. The resulting gels had the characteristics of weak gels. Ash from burning wood biomass is an innovative alternative to mineral fertilizers. It was shown that the use of such soil fertilization influenced the properties of barley starch.

Comparison of the Rheological Behavior of Fortified Rye-Wheat Dough with Buckwheat, Beetroot and Flax Fiber Powders and Their Effect on the Final Product

This study was focused on the replacement of the part of the flour (10% w/w) in rye-wheat bread with three different botanical origin powders with a high dietary fiber content (buckwheat hulls, beetroot and flax powder). The dough was based on rye-wheat flour without and with the addition of fiber powders with different botanical origins and was tested, and the quality of the finished baked products made from those doughs were assessed. In order to characterize the flour mixtures, their basic parameters were determined, and their pasting characteristic was performed. The dough parameters were described by the Burger rheological model and also the creep and recovery test. On the other hand, in bread, the basic parameters of baking, crumb and crust color parameters were determined, and an analysis of the crumb texture was carried out. Additionally, a sensory analysis of the finished products was carried out. The applied fiber additives influenced the pasting characteristics of the tested rye-wheat flour and were influenced by the dough rheological properties. It was found that used fiber powders changed the quality parameters of the final products. Despite this, using fiber at the amount of 10% as a flour substitute allowed us to obtain bread of a similar quality to the control sample.

The Influence of Farming Systems, Genotype and Their Interaction on Bioactive Compound, Protein and Starch Content of Bread and Spelt Wheat

An increase in the production and consumption of spelt products can be associated with positive effects on human health, which are attributed to bioactive compounds present in the grain. The basic success of spelt wheat in organic farming might be explained by the fact that spelt wheat belongs to the group of hulled wheat where the presence of a husk protects the seed from abiotic and biotic stress factors, thus demanding less chemical protection. The goal of this study was to investigate the variations in the bioactive compound (alkylresorcinol, arabinoxylan, β-glucan), protein, starch and fructan content of bread and spelt wheat under different farming systems (conventional and organic). The results showed higher protein and alkylresorcinol but lower fructan content in spelt wheat. Organic spelt had significantly higher starch, fiber and alkylresorcinol content but lower β-glucan and protein content than conventionally grown spelt. The spelt variety 'Oberkulmer-Rotkorn' was characterized by the highest values for the majority of analyzed traits under both farming systems. Overall, the environmental conditions (Hungary and Serbia), farming systems (conventional and organic) and wheat species (bread and spelt) contributed to the variations of the compositional traits in different manners.

Techno-Functional Performance of Emmer, Spelt and Khorasan in Spontaneously Fermented Sourdough Bread

The aim of this study was to test the suitability of three different ancient wheat varieties (emmer, spelt and khorasan) to produce spontaneously fermented sourdough bread and to evaluate the impact on the dough rheological properties, ultrastructure and baking quality. Modern wheat sourdough bread and bakery yeast fermented bread were used as controls. Sourdoughs produced from modern and ancient wheats exerted different effects on dough viscoelastic properties, bread specific volume, texture, firming rate, colour and sensory properties, while there was no influence on bread water activity. Both khorasan sourdough, being characterised with the highest dough strength and dense gluten protein matrix, and emmer sourdough, with loose and thin gluten strands of low strength, yielded breads characterised by low specific volume and hard crumb texture. Spelt and modern wheat sourdough were characterised by foam-like dough structures with entrapped gas cells leading to breads of similar specific volume and texture. Although the yeast-fermented wheat flour exerted a higher specific volume and the lowest firmness, the sourdough wheat flour bread had a lower firming rate. A comparison of sourdough bread prepared with modern and ancient wheats revealed that breads based on ancient varieties possess a less noticeable sour taste, odour and flavour, thus contributing to more sensory-appealing sourdough bread.

The Effect of the Addition of Hazelnut or Walnut Flour on the Rheological Characteristics of Wheat Dough

The aim of this study was to evaluate the effect of the addition of hazelnut or walnut flour on the rheological properties of flour and wheat dough (WD). The research material was a system in which wheat flour was replaced with flour based on hazelnuts (HF) or walnuts (WF), i.e., nut flour, in the amounts of 5%, 10% and 15% (WDH, WDW). As a part of the research methodology, we analysed the wet gluten content, and farinographic and extensographic analyses of the dough were performed. Sweep frequency, creep and recovery tests were used to assess the viscoelastic properties of the tested doughs. It was found that the doughs with the addition of walnuts were characterized by different rheological properties compared to the control sample. The systems in which wheat flour was replaced with nuts were characterized by lower water absorption, and this parameter decreased as the share of nuts in the system increased. The mean value of this parameter for WDH was 48.6%, and in the case of WDW it was 47.9%. The development times of WDH and WDW doughs were longer compared to the control, but they decreased as the addition of nut flour was increased. The WDH doughs were characterized by the lowest stability and the highest degree of softening among the examined doughs. It was shown that the addition of nut flour reduced the values of the storage (G′) and loss (G″) modules characterizing the tested doughs, while in each case the G′ value was greater than the G″ value, which proves the advantage of the elastic properties. The creep and recovery tests showed that the nut dough was more susceptible to deformation compared to the control, which indicates that the presence of nut flour weakens the formation of the gluten network forming the dough structure, and makes it more susceptible to stress.

Ancient Wheat and Quinoa Flours as Ingredients for Pasta Dough-Evaluation of Thermal and Rheological Properties

The aim of this study was to investigate thermal and rheological properties of selected ancient grain flours and to evaluate rheological properties of mixtures thereof represented by pasta dough and dry pasta. Flours from spelt, einkorn, and emmer ancient wheat varieties were combined with quinoa flour. All these flour sources are considered healthy grains of high bioactive component content. Research results were compared to durum wheat flour or spelt wheat flour systems. Differential scanning calorimeter (DSC) and a rapid visco analyzer (RVA) were used to investigate the phase transition behavior of the flours and pasting characteristics of the flours and dried pasta. Angular frequency sweep experiments and creep and recovery tests of the pasta dough were performed. The main components modifying the pasta dough structure were starch and water. Moreover, the proportion of the individual flours influenced the rheological properties of the dough. The durum wheat dough was characterized by the lowest values of the K' and K″ parameters of the power law models (24,861 Pa·sⁿ' and 10,687 Pa·sⁿ″, respectively) and the highest values of the instantaneous (J₀) and retardation (J₁) compliances (0.453 × 10^-4 Pa and 0.644 × 10^-4 Pa, respectively). Replacing the spelt wheat flour with the other ancient wheat flours and quinoa flour increased the proportion of elastic properties and decreased values of the J₀ and J₁ of the pasta dough. Presence of the quinoa flour increased pasting temperature (from 81.4 up to 83.3 °C) and significantly influenced pasting viscosities of the spelt wheat pasta samples. This study indicates a potential for using mixtures of spelt, einkorn, and emmer wheat flours with quinoa flour in the production of innovative pasta dough and pasta products.

Evaluation of Flours from Ancient Varieties of Wheat (Einkorn, Emmer, Spelt) used in Production of Bread

The study investigates rheological properties of dough and baking process made from flour obtained by milling grains from ancient varieties of wheat (einkorn, emmer and spelt), compared to common wheat flour dough (Arkadia variety). The findings show that einkorn flour dough and emmer flour dough present poor tolerance to mechanical processing and prolonged fermentation. These types of dough should be mixed through relatively short, and fermentation time should not exceed 80 minutes for einkorn dough and 45 minutes in the case of emmer dough. In the case of spelt flour dough, the optimum duration of mechanical processing and fermentation amounted to 10 minutes and 60 minutes, respectively. In terms of technological and baking parameters, spelt flour was most similar to the flour obtained by milling conventional wheat, and the superiority of the former was in fact identified in the case of selected factors. A one-stage method was used in the baking process and the bread was then subjected to organoleptic and physicochemical assessments and to texture profile analysis (TPA). Measurements were also performed to determine the indicators reflecting the quality of the baking processes, including dough yield, baking loss and bread yield. The physical parameters of the bread produced were significantly related to the wheat variety. The loaves made from einkorn and spelt flour were of good quality, comparable to the bread made from the conventional wheat, while their baking quality indicators were satisfying. Bread dough made from emmer flour did not meet the required parameters mainly related to the organoleptic assessment and selected physical properties of the bread crumb. However, the one-stage production method should not be applied to doughs made from emmer flour. Given the specific characteristics of the breads produced from the ancient wheat varieties, including their pleasant taste and aroma, as well as attractive colour in the case of einkorn bread, these baked products may be an interesting addition to the assortment of breads on offer from bakeries, restaurants and agritourist farms.

Differences in Processing Quality Traits, Protein Content and Composition between Spelt and Bread Wheat Genotypes Grown under Conventional and Organic Production

The unique rheological properties of bread wheat dough and the breadmaking quality of its flour are the main factors responsible for the global distribution and utilization of wheat. Recently, interest in the production and expansion of spelt wheat has been boosted due to its significance in the production of healthy food, mostly originated from organic production. The aim of this study was to examine and compare quality parameters (gluten content, Zeleny sedimentation volume, farinograph dough properties), protein content and composition (by the Dumas method, Size Exclusion (SE) and Reversed Phase (RP) High Performance Liquid Chromatography (HPLC) analyses) of five bread and five spelt wheat varieties grown under conventional and organic production in Hungary and under conventional production in Serbia. Most of the analyzed traits showed significant differences between varieties, wheat species and growing sites. Total protein content was significantly higher in spelt than in bread wheat and under conventional than under organic production. In comparison to spelt, bread wheat showed better breadmaking quality, characterized by a higher amount of glutenins (in particular high molecular weight glutenin subunits) and unextractable polymeric proteins. The proportion of the gliadins was also found to be different under conventional and organic systems. Spelt Ostro and Oberkulmer-Rotkorn and bread wheat varieties Balkan, Estevan and Pobeda proved suitable for low input and organic systems.

Characteristics of Technological Properties of Grain and Flour from Ancient Varieties of Wheat (Einkorn, Emmer and Spelt)

The study presents assessment of commodity characteristics of grains from ancient varieties of wheat (einkorn, emmer and spelt) in comparison to grains of the conventional wheat cultivar Arkadia. The findings related to the grain of einkorn and emmer were very similar, and far worse than those related to spelt grain; the latter were found with better ratings, sometimes even in comparison to the conventional wheat grain (e.g. the highest mass-weight density). Similar relationships were observed between the flours produced by milling the grains. Analysis of the indirect baking quality indicators showed that flours from einkorn and emmer can effectively be used for baking purposes, however they present low technological value. The flour from emmer wheat was found to be the poorest, which was confirmed e.g. by the low gluten number, gluten index, Zeleny’s index, and high gluten spreadability. Spelt flour was found to present moderate technological value. Based on the results it can be concluded that by using adequate modification in the process of dough kneading and fermentation it will be possible to produce high quality baked goods from ancient wheat grains.

Physicochemical and Antioxidant Properties of Wheat Bread Enriched with Hazelnuts and Walnuts

The aim of this study was to evaluate the effect of wheat bread enrichment using hazelnuts and walnuts (1%, 3%, 6%, 9%) on the nutritional value and selected physicochemical and antioxidant properties. The dough and bread yield, volume, specific volume and porosity were also determined. The crumb texture was analyzed by texture profile analysis (TPA) test using a texture meter. The color of the crumb was assessed in the CIE L*a*b* color space. Antioxidant properties were determined by the ABTS⁺ radical method. The contents of phenolic acids, flavonoids and total polyphenols were also determined. The test demonstrated that the enrichment of bread with nuts increased the level of minerals, protein, fiber and fat. Breads containing walnuts were characterized by the highest content of these nutrients. The bread with a 9% walnut content by the smallest volume (380 cm³) had lowest value of L*. The crumb of the enriched breads was characterized by greater hardness, gumminess and chewiness, the values of these parameters generally increasing in parallel to the nut content. Breads enriched with walnuts were characterized by a higher average total content of polyphenols (35.77 mg gallic acid equivalent (GAE)/100 g dry mass (DM)) compared to the breads enriched with walnuts (25.35 mg GAE/100 g DM).

Bread making potential of Triticum aestivum and Triticum spelta species

The aim of this study was to assess the effect of two winter wheat species: Triticum aestivum ssp. vulgare, and Triticum spelta, cultivated in different percentage of cereals in crop rotation, on their bread making potential. The analyzed grain samples were obtained from a field experiment conducted during three years 2014-2016 at the Experimental Station in Osiny (51°35’, 21°55’), Institute of Soil Science and Plant Cultivation, State Research Institute, Puławy, Poland. The experiment was established following different percentages of shared cereals in crop rotation (SCCR): 50, 75 and 100%. Wheat cultivation was performed in accordance with good agricultural practice standards. Protein content, gluten content, Zeleny sedimentation index and alveograph properties were determined. Wheat species strongly influenced bread potential. The Triticum aestivum compared to Triticum spelta was characterized by significantly higher gluten quality and Zeleny sedimentation index as well as better alveograph properties. Common wheat showed the highest baking value (W). Spelt wheat was characterized by the lowest tenacity (P) and the highest extensibility (L). Moreover, the percentage of cereals in crop rotation had an effect on grain and dough quality parameters. Cultivation of wheat in 100% share of cereals resulted in the lowest grain and dough quality.

Comparative Study on Gluten Protein Composition of Ancient (Einkorn, Emmer and Spelt) and Modern Wheat Species (Durum and Common Wheat)

The spectrophotometric Bradford assay was adapted for the analysis of gluten protein contents (gliadins and glutenins) of spelt, durum wheat, emmer and einkorn. The assay was applied to a set of 300 samples, including 15 cultivars each of common wheat, spelt, durum wheat, emmer and einkorn cultivated at four locations in Germany in the same year. The total protein content was equally influenced by location and wheat species, however, gliadin, glutenin and gluten contents were influenced more strongly by wheat species than location. Einkorn, emmer and spelt had higher protein and gluten contents than common wheat at all four locations. However, common wheat had higher glutenin contents than einkorn, emmer and spelt resulting in increasing ratios of gliadins to glutenins from common wheat (< 3.8) to spelt, emmer and einkorn (up to 12.1). With the knowledge that glutenin contents are suitable predictors for high baking volume, cultivars of einkorn, emmer and spelt with good predicted baking performance were identified. Finally, spelt, emmer and einkorn were found to have a higher nitrogen partial factor productivity than common and durum wheat making them promising crops for a more sustainable agriculture.

An Evaluation of Spelt Crosses for Breeding New Varieties of Spring Spelt

This study evaluated F5 breeding lines, which were obtained by crossing five parents of spring spelt from different geographical regions characterized by various morphological and performance traits. A total of 11 quantitative traits were analyzed, including six traits relating to yield components, four traits relating to grain quality, and one trait relating to plant height and sensitivity to lodging. The applied clustering method supported the identification of four groups of breeding lines which were presented graphically in a heatmap with dendrogram. Group I contained 33.0% of the breeding lines, and it was most distant from the remaining groups. It was composed of tall plants characterized by high values of yield components, high fat content, and high sensitivity to lodging. Groups III (30.4%) and IV (17.0%) were most similar and were characterized by lower values of yield components, a high content of protein, ash and fiber, and lower sensitivity to lodging. Group II contained 19.6% of the breeding lines, and it was more similar to groups III and IV than group I. Breeding lines with satisfactory performance traits can be selected from each group and used to breed new varieties with the desired traits.