Optimization of curcumin loaded vaginal in-situ hydrogel by box-behnken statistical design for contraception

Glycyrrhizic Acid-Loaded Poloxamer and HPMC-Based In Situ Forming Gel of Acacia Honey for Improved Wound Dressing: Formulation Optimization and Characterization for Wound Treatment

The present study aims to formulate a stimuli-responsive in situ hydrogel system to codeliver acacia honey and glycyrrhizic acid for topical application that will aid in absorbing wound exudates, control microbial infestation, and produce angiogenic and antioxidant effects to accelerate wound healing. Therefore, both the natural active constituents were incorporated within an in situ hydrogel composed of poloxamer and hydroxypropyl methylcellulose (HPMC), where the concentrations of the polymers were optimized using Design-Expert software considering optimum values of the dependent variables, gelation temperature (34-37 °C), gelation time (<10 min), and the viscosity (2000-3500 cPs). The optimized formulation showed improved physicochemical properties such as mucoadhesiveness, porosity, swelling, and spreadability, which makes it suitable for wound application. Additionally, the in situ hydrogel exhibited potent in vitro and ex vivo antioxidant effects, in vitro antimicrobial activities, and ex ovo angiogenic effects. Furthermore, the optimized formulation was found to be nontoxic while tested in the HaCaT cell line and acute dermal irritation and corrosion study. The findings of the in vivo wound-healing studies in experimental animal models showed complete wound closure within 15 days of treatment and accelerated development of the extracellular matrix. In addition, the antioxidant, antimicrobial, angiogenic, and wound-healing properties of acacia honey and glycyrrhizic acid coloaded in situ hydrogel were also found to be promising when compared to the standard treatments. Overall, it can be concluded that the optimized stimuli-responsive in situ hydrogel containing two natural compounds could be an alternative to existing topical formulations for acute wounds.

Rational design of a Nano-Antibiotic chitosan hydrogel for the bacterial infection Therapy: In vitro & ex vivo Assessments

In modern times, many antibiotics have become less effective as microorganisms develop resistance. Besides antibiotic resistance, another bacterial strategy that contributes to the capacity to withstand antimicrobials is biofilm formation. Because of these bacterial survival strategies, the desired response cannot be achieved with conventional treatment. Considering the limited discovery of new compounds, the most logical approach is to reconstruct existing antimicrobial molecules with nano-drug delivery systems. With this scientific approach, the aim of the study is to develop a novel nano-antibiotic hydrogel formulation containing silver nanoparticles, chitosan, and amoxicillin. Endodontic disease was used as a model of biofilm-mediated infection, and the antibacterial activity of nano-antibiotic hydrogel was evaluated with the E. faecalis standard bacterial strain. By adopting the Box-Behnken design for the optimisation of formulation variables, an innovative pharmaceutical formulation with antimicrobial and antibiofilm activity was successfully obtained. Further characterisation studies, including nanoparticle characterisation, in vitro cytotoxicity, and ex vivo activity studies, were carried out on dental samples using the optimised formulation. All results were compared with antimicrobial agents routinely used in endodontic treatment. The findings mainly conclude that the optimised nano-antibiotic hydrogel may be an alternative antimicrobial formulation since it is non-cytotoxic and exhibits high antibiofilm activity.

(Nano)biotechnological approaches in the treatment of cervical cancer: integration of engineering and biology

Cervical cancer is one of the most malignant gynaecological tumors characterised with the aggressive behaviour of the tumor cells. In spite of the development of different strategies for the treatment of cervical cancer, the tumor cells have developed resistance to conventional therapeutics. On the other hand, nanoparticles have been recently applied for the treatment of human cancers through delivery of drugs and facilitate tumor suppression. The stimuli-sensitive nanostructures can improve the release of therapeutics at the tumor site. In the present review, the nanostructures for the treatment of cervical cancer are discussed. Nanostructures can deliver both chemotherapy drugs and natural compounds to increase anti-cancer activity and prevent drug resistance in cervical tumor. Moreover, the genetic tools such as siRNA can be delivered by nanoparticles to enhance their accumulation at tumor site. In order to enhance selectivity, the stimuli-responsive nanoparticles such as pH- and redox-responsive nanocarriers have been developed to suppress cervical tumor. Moreover, nanoparticles can induce photo-thermal and photodynamic therapy to accelerate cell death in cervical tumor. In addition, nanobiotechnology demonstrates tremendous potential in the treatment of cervical cancer, especially in the context of tumor immunotherapy. Overall, metal-, carbon-, lipid- and polymer-based nanostructures have been utilized in cervical cancer therapy. Finally, hydrogels have been developed as novel kinds of carriers to encapsulate therapeutics and improve anti-cancer activity.

Demonstration of Advanced Data Mining Tools for Optimization of Pellets Employing Modified Extrusion-pelletization Technique

Background:

The multi particulate drug delivery system is preferred due to its numerous advantages but the batch to batch consistency and to achieve desired physical properties are the major challenges in the formulation of such dosage form.

Objective:

The objective of the present study was to explore the concept of quality by design for the development of galantamine HBr controlled release pellets using a modified palletization technique.

Methods:

Compritol 888 and Ethocel were chosen as hydrophobic release retardants, while Avicel was chosen as pelletization aid. A compatibility study was conducted between the drug and excipients. Drug loaded extrudes were prepared by using a mixture of isopropyl alcohol, and dichloromethane. Before converting the wet extrudes into pellets, pregelatinized starch was sprinkled on them to improve the physical properties of the pellets. The pellets were characterized for size, shape, and flow. The critical evaluation parameter was the drug dissolution pattern in distilled water. The dissolution data were treated with advanced data mining techniques. The in-vivo profile was predicted employing pharmacokinetic parameters of the drug and in-vitro drug release data of optimized batch pellets.

Results:

The failure mode and effect analysis revealed that the amount of Compritol 888 ATO and Ethocel were the most critical formulation parameters. The results of FTIR and DSC revealed compatibility between the drug and the excipients. The spherical pellets exhibited good flow. The drug dissolution studies of the batches, prepared according to the central composite design, revealed modified drug release. Multiple regression analysis and analysis of variance were performed to identify statistically significant factors. Contour plots demonstrated the impact of the amount of Compritol 888 and ethyl cellulose. The Design-Expert software was used to identify optimized formulation. The predicted in-vivo plasma concentration-time profile revealed the modified drug release up to 12h.

Conclusions:

Compritol and Ethocel were able to retard the drug release up to 12 hrs in distilled water. The innovative finding of this study is the use of a dry binder (pregelatinized starch) to improve the characteristics of pellets. Other dry binders are expected to show a similar effect. The newer processing technique can be of use in the industry.

Systematic Development of Bicalutamide Immediate Release Pellets Using Aeroperl and Non-MCC Extruder Aid

Background:

The Microcrystalline Cellulose is called as a gold standard for the manufacture of pellets. The poor disintegration leads to incomplete drug release that restricts the use of MCC in the immediate-release formulation.

Objective:

The present work aims to explore non-MCC extruder aid for pellet formulation and solubility modulation potential of Aeroperl® 300 Pharma.

Methods:

Bicalutamide (BCL) was selected as a model BCS class-II drug. The solubility of BCL was assessed in different vehicles such as polyethylene glycol, propylene glycol, and Tween by carrying out phase solubility study. The suitable vehicle was selected based on the higher solubility of BCL. The vehicle was further adsorbed on newer adsorbent Aeroperl® 300 Pharma to formulate liquisolid granules. The liquisolid granules were further incorporated into the pellet using mannitol and microcrystalline cellulose as an extruder aid. Box-Behnken design was adopted for the optimization of formulation considering MCC: mannitol ratio, the concentration of HPMC and spheronizer speed as independent factors whereas drug release at 30 min, disintegration time and aspect ratio were selected as dependent variables. The pellets were evaluated for different evaluation parameters.

Results:

Propylene glycol was selected for the formulation of liquisolid technique based on the results of the phase solubility study. Propylene glycol containing BCL was adsorbed on Aeroperl 300 Pharma. The optimized batch was selected exploring the Design-Expert software by considering the limits of different responses. Pellet had excellent flowability. Friability was found to be within the range (<1%). Pellets were found to be spherical and had pores on the surfaces.

Conclusion:

Liquisolid granules containing newer solubilizer Aeroperl was found to be a promising approach for the improvement in the solubility of the drug. The use of mannitol with MCC has a profound effect on disintegration time, without altering flow property and other parameters. No patents were reported on the combination of Bicalutamide, mannitol and Aeroperl. The critical finding of the present work is to use mannitol as an extruder aid to fasten the disintegration leads to complete drug release within a short period of time. Aeroperl and Mannitol, MCC: mannitol ratio, the concentration of HPMC and spheronizer speed were found to be significant and had the potential effect in pellet formulation.

Development and optimization of nanoemulsion based gel for enhanced transdermal delivery of nitrendipine using box-behnken statistical design

Objective: The purpose of present research was to develop and statistically optimize nitrendipine nanoemulsion gel for transdermal delivery using box-behnken statistical design.Method: The nanoemulsion formulations bearing nitrendipine were prepared by application of ternary phase diagram and spontaneous emulsification method. Box-behnken design was employed for the optimization of nitrendipine loaded nanoemulsion. The independent variables were oil, surfactant and co-surfactant while globule size, drug content and zeta potential were dependent variables. The optimized nanoemulsion formulation was incorporated into gel and evaluated for in-vitro release, ex-vivo permeation studies, confocal laser scanning microscopy, skin irritation and histopathological studies.Results: The optimized formulation through box-behnken statistical design showed globule size of 20.43 ± 1.50 nm, drug content of 97.05 ± 1.77% and zeta potential of -15.45 ± 0.35 mV. The ex-vivo study confirmed the enhanced delivery of nitrendipine from nanoemulsion gel than compare to drug solution by virtue of better permeation and solubility. Nanoemulsion gel was proved significantly superior by confocal laser scanning microscopy for satisfactory permeation and distribution of gel, deep into the rat skin. The optimized gel was found with no allergic dermal effects and was proved safe by histopathological studies for transdermal application.Conclusions: Results reveals that developed nitrendipine nanoemulsion gel overcomes the limitation of low penetration and accentuate permeation through albino Wistar rat skin. It was concluded that nanoemulsion gel could be utilized as a potential carrier for transdermal delivery of nitrendipine.

Systematic Scrutinisation of Vital Factors for Fabrication and Evaluation of PGS-MCC Based Drug Loaded Pellets by Extrusion Spheronization Technique

Objective:

The prime objective was to formulate pellet formulation incorporating a newer extrusion- pelletisation aid, Pregelatinised Starch (PGS) and to scrutinise the factors that can affect the quality of the pellets and to overcome the slower disintegration of Microcrystaline Cellulose (MCC).

Methods:

Pellets were prepared initially using PGS, MCC, water, ethanol, HPMC K 4 M and Febuxostat was employed as model drug. Optimisation of formulation was done by employing Quality by design (QbD) and Design of experiment (DoE) approach. Ratio of PGS and MCC, ratio of binder and spheronisation speed were selected as independent variables and disintegration time and % cumulative drug release as dependent variables. In vitro in vivo correlation of the optimised batch was carried out using Wagner nelson method. Incompatibility studies have indicated compatibility of drug and excipients.

Results:

From the experiments, it was proved that the batch comprising 3:1 ratio of PGS and MCC, 1:1 binder solution and 1500 speed yielded good pellets with decreased disintegration time and improved dissolution rate as compared to pure Febuxostat. IVIVC studies indicated one to one correlation between in vitro and in vivo parameters.

Conclusion:

Pellets with good quality, minimum disintegration time and improved dissolution of model drug were successfully prepared with maximum amount of PGS. Optimisation using QbD approach was worth fruitful that affected the quality of pellets.

Injectable Vaginal Hydrogels as a Multi-Drug Carrier for Contraception

Injectable intravaginal hydrogels could deliver drugs systemically without hepatic first pass effect. This paper focuses on the contraceptive function of an injectable temperature-sensitive four-arm star-shaped poly(D,L-lactic-co-glycolic acid)-b-methoxy poly(ethylene glycol) (4sPLGA-mPEG) block copolymer hydrogels as a carrier of three drugs. In vitro controlled release profiles were investigated via HPLC, and it showed that the cumulative release amounts of indomethacin (IMC), gestodene (GSD), and ethinyl estradiol (EE) from copolymer hydrogels could be regulated by adjusting the lactide/glycolide (LA/GA) mol ratio. In addition, in vitro release profiles of IMC, GSD, and EE well corresponded to Higuchi model. The acute toxicity of copolymer hydrogels loaded with different dosage contents multi-drug was evaluated in vivo. As to the high dosage group, the uterus was hydropic at day 1 and ulcerated at day 5, followed with intestinal adhesion. Regarding the middle dosage group, no festering of tissues was observed and, blood coagulum existed in the uterus at different days. For low dosage group, no significant tissue necrosis was found. Finally, the antifertility experiments confirmed that hydrogels loaded with the multi-drug had an excellent contraceptive effect. The above results indicated that injectable copolymer hydrogel as a multi-drug carrier was promising as a novel contraception method.

Development of Biodegradable Injectable In situ Forming Implants for Sustained Release of Lornoxicam

OBJECTIVE

The focus of this study was to develop in situ injectable implants of Lornoxicam which could provide sustained drug release.

METHODS

Biodegradable in situ injectable implants were prepared by polymer precipitation method using polylactide-co-glycolide (PLGA). An optimized formulation was obtained on the basis of drug entrapment efficiency, gelling behavior and in vitro drug release. The compatibility of the formulation ingredients were tested by Fourier transform infrared (FT-IR) spectroscopy, and differential scanning colorimetry (DSC). SEM study was performed to characterize in vivo behavior of in situ implant. Pharmacokinetic study and in vivo gelling study of the optimized formulation were performed on Sprague-Dawley rats. Stability testing of optimized formulation was also performed.

RESULTS

The drug entrapment efficiency increased and burst release decreased with an increase in the polymer concentration. Sustained drug release was obtained up to five days. SEM photomicrographs indicated uniform gel formation. Chemical interaction between the components of the formulation was not observed by FT-IR and DSC study. Pharmacokinetic studies of the optimized formulation revealed that the maximum plasma concentration (Cmax), time to achieve Cmax (Tmax) and area under plasma concentration curve (AUC) were significantly higher than the marketed intramuscular injection of lornoxicam. Stability study of optimized batch showed no change in physical and chemical characteristics.

CONCLUSION

Lornoxicam can be successfully formulated as in situ injectable implant that provides long-term management of inflammatory disorders with improved patient compliance.

Optimization of the preparation conditions of thermo-sensitive chitosan hydrogel in heterogeneous reaction using response surface methodology

A thermo-sensitive hydroxybutyl chitosan (HBC) hydrogel was prepared by using 1,2‑butene oxide as an etherification modifying agent. To obtain the maximum yield of HBC, response surface methodology (RSM) was applied to optimize its preparation conditions. Key factors were chosen firstly by Plackett-Burman design (PBD) experiments, such as the concentration of NaOH, the ratio of isopropanol to water and reaction temperature. Steepest ascent experiments were employed to reach the top region of the response and determine the appropriate levels of three key factors. A three-level-three-variable Box-Behnken design (BBD) was used to further optimize the synthesis parameters. The results indicated that when the concentration of NaOH and the ratio of isopropyl alcohol to water were 40.65% and 2.68:1 at reaction temperature of 59 °C, respectively, the yield of HBC production was 5.897 ± 0.112 g and close to the predicted value (6.002 g), which demonstrated that the effectiveness of BBD model and the controllability for the yield of HBC in the heterogeneous reaction system.

Biological activities of curcuminoids, other biomolecules from turmeric and their derivatives - A review

In recent years, several drugs have been developed deriving from traditional products and current drug research is actively investigating the possible therapeutic roles of many Ayruvedic and Traditional Indian medicinal therapies. Among those being investigated is Turmeric. Its most important active ingredient is curcuminoids. Curcuminoids are phenolic compounds commonly used as a spice, pigment and additive also utilized as a therapeutic agent used in several foods. Comprehensive research over the last century has revealed several important functions of curcuminoids. Various preclinical cell culture and animals studies suggest that curcuminoids have extensive biological activity as an antioxidant, neuroprotective, antitumor, anti-inflammatory, anti-acidogenic, radioprotective and arthritis. Different clinical trials also suggest a potential therapeutic role for curcuminoids in numerous chronic diseases such as colon cancer, lung cancer, breast cancer, inflammatory bowel diseases. The aim of this review is to summarize the chemistry, analog, metal complex, formulations of curcuminoids and their biological activities.

Vaginal delivery of carboplatin-loaded thermosensitive hydrogel to prevent local cervical cancer recurrence in mice

Local tumor recurrence after cervical cancer surgery remains a clinical problem. Vaginal delivery of thermosensitive hydrogel may be suited to reduce tumor relapse rate with more efficacy and safety. A pilot study was carried out to evaluate the efficacy of carboplatin-loaded poloxamer hydrogel to prevent local recurrence of cervical cancer after surgery. In vivo vaginal retention evaluation of 27% poloxamer hydrogel in mice was proven to be a suitable vaginal drug delivery formulation due to its low gelation temperature. A mimic orthotopic cervical/vaginal cancer recurrence model after surgery was established by injecting murine cervical cancer cell line U14 into the vaginal submucosa to simulate the residual tumor cells infiltrated in the surgical site, followed by drug administration 24 h later to interfere with the formation/recurrence of the tumor. By infusing fluorescein sodium-loaded hydrogel into the vagina of mice, a maximized accumulation of fluorescein sodium (Flu) in the vagina was achieved and few signals were observed in other organs. When used in the prevention of the cervical cancer formation/recurrence in mice, the carboplatin-loaded poloxamer hydrogel exhibited great efficacy and systemic safety. In conclusion, thermosensitive hydrogel presents a simple, practical approach for the local drug delivery via vagina against cervical cancer recurrence.

A 32full factorial design for development and characterization of a nanosponge-based intravaginal in situ gelling system for vulvovaginal candidiasis

The rationale behind present research effort was to enhance CTZ solubility and efficacyviaforming complex with hydroxypropyl β-cyclodextrin (HP-β-CD) nanosponges.