Development and application of an osthole microemulsion hydrogel for external drug evaluation

DPD Simulation on the Transformation and Stability of O/W and W/O Microemulsions

The dissipative particle dynamics simulation method is adopted to investigate the microemulsion systems prepared with surfactant (H1T1), oil (O) and water (W), which are expressed by coarse-grained models. Two topologies of O/W and W/O microemulsions are simulated with various oil and water ratios. Inverse W/O microemulsion transform to O/W microemulsion by decreasing the ratio of oil-water from 3:1 to 1:3. The stability of O/W and W/O microemulsion is controlled by shear rate, inorganic salt and the temperature, and the corresponding results are analyzed by the translucent three-dimensional structure, the mean interfacial tension and end-to-end distance of H1T1. The results show that W/O microemulsion is more stable than O/W microemulsion to resist higher inorganic salt concentration, shear rate and temperature. This investigation provides a powerful tool to predict the structure and the stability of various microemulsion systems, which is of great importance to developing new multifunctional microemulsions for multiple applications.

Development of Licorice Flavonoids Loaded Microemulsion for Transdermal Delivery Using CCD-Optimal Experimental Approach: Formulation Development and Characterization

In this research, we sought to surmount the poor dissolvability and transdermal absorption rate of licorice flavonoids (LFs) by fabricating a LFs microemulsion. LFs content was determined using high performance liquid chromatography. Initial studies such as dissolution testing, emulsification testing, and pseudo ternary phase diagram generation were implemented for screening components and optimized adopting the central composite design. While the tested responses were solubility, droplet size and PDI, thirteen trials were performed using two different variables, oil percentage and optimized emulsifier and co-emulsifier ratio. Microemulsions were then characterized for droplet size, PDI, transmission electron microscopy, viscosity, electrical conductivity, pH, entrapment efficiency, drug content and stability. Additionally, skin release profile, percutaneous absorption and retention were investigated adopting Franz diffusion cell. The optimal formulation was found to compose of laureth-9 (emulsifier, 6.72 g), propylene glycol (co-emulsifier, 1.80 g), isopropyl myristate (IPM, oil, 1.48 g), LFs (1.50 g) and at least more than 85% deionized water. The optimized and storage for 3 months of microemulsion was found to clear, light yellow color without phase separation or precipitation indicated the stability of the preparation to long-term placement. The mean droplet size, PDI, entrapment efficiency and drug content were discovered as 12.68 ± 0.12 nm, 0.049 ± 0.005, 97.28 ± 0.13% and 122.67 ± 0.40 mg·g−1, respectively. Furthermore, the optimal formulation sustained release LFs, remarkably deliver more LFs through the skin layer (644.95 ± 6.73 μg cm−2) and significantly retained LFs in the skin layer (9.98 μg cm−2). The study concluded that optimized microemulsion has potential and enhanced the dissolvability and cumulative penetration amount of LFs.

Permeation, stability and acute dermal irritation of miroestrol and deoxymiroestrol from Pueraria candollei var. mirifica crude extract loaded transdermal gels

In this study, permeation behaviors and chemical stability of miroestrol and deoxymiroestrol from Pueraria candollei var. mirifica (PM), Thai traditional medicine, crude extract containing transdermal gels were firstly evaluated. Three different PM extract containing gels were formulated, including hydroalcoholic and microemulsion gels using carbomer, and silicone gel using silicone elastomer. In vitro permeation through porcine ear skin demonstrated that the flux and 24 h cumulative permeation of miroestrol and deoxymiroestrol were in the order of hydroalcoholic > silicone > microemulsion gels. Hydroalcoholic gel provided the highest partition coefficient from gel onto skin, and thus the skin permeability coefficient. After 24 h permeation, no miroestrol and deoxymiroestrol remained deposited in the skin. Accelerated study using heating-cooling revealed insignificant difference between the remaining percentages of miroestrol and deoxymiroestrol in aqueous and non-aqueous based gels. Long-term stability study showed that miroestrol contents remained constant for 90 d and 30 d under 5 ± 3 °C and 30 ± 2 °C, 75 ± 5%RH, respectively; whereas the percentage of deoxymiroestrol decreased significantly after 30 d storage, irrespective of storage conditions. Acute dermal irritation test on New Zealand White rabbits showed that PM hydroalcoholic gels were non-irritant, with no signs of erythema or oedema.[Figure: see text].