Water-associated attributes in the contemporary dentin bonding milieu

Effect of Nisin-based pretreatment solution on dentin bond strength, antibacterial property, and MMP activity of the adhesive interface

OBJECTIVE

To evaluate the effect of a Nisin-based dentin pretreatment solution on microtensile bond strength, antibacterial activity, and matrix metalloproteinase (MMP) activity of the adhesive interface.

MATERIALS AND METHODS

100 human molars were sectioned to expose dentin. The teeth were assigned to five groups (n = 20), according to the dentin pretreatment: 0.5%, 1.0%, or 1.5% Nisin; 0.12% chlorhexidine (positive control), and no solution (negative control), and divided into 2 subgroups: no aging, and thermomechanical aging. Specimens were etched with 37% H3PO4 for 15 s and submitted to the dentin pretreatment. Then, they were bonded with an adhesive (Adper Single Bond 2) and a resin composite for microtensile bond strength (μTBS) evaluation. Antibacterial activity against Streptococcus mutans was qualitatively examined using an agar diffusion test. Anti-MMP activity within hybrid layers was examined using in-situ zymography. Data were analyzed with two-factor ANOVA and post-hoc Tukey's test (α = 0.050).

RESULTS

For μTBS, significant differences were identified for the factors "solutions" (p = 0.002), "aging" (p = 0.017), and interaction of the two factors (p = 0.002). In the absence of aging, higher μTBS was observed for the group 0.5% Nisin. In the presence of aging, all groups showed similar μTBS values. All Nisin concentrations were effective in inhibiting the growth of S. mutans. Endogenous MMP activity was more significantly inhibited using 0.5% and 1.0% Nisin (p < 0.050).

CONCLUSION

0.5% and 1.0% Nisin solutions do not adversely affect resin-dentin bond strength and exhibit a potential bactericidal effect against S. mutans. Both concentrations effectively reduce endogenous gelatinolytic activity within the hybrid layer.

CLINICAL RELEVANCE

The use of 0.5% and 1.0% Nisin solutions for dentin pretreatment potentially contributes to preserving the adhesive interface, increasing the longevity of composite restorations.

A glycol chitosan derivative with extrafibrillar demineralization potential for self-etch dentin bonding

OBJECTIVES

Extrafibrillar demineralization is an etching technique that removes only minerals from around the collagen fibrils for resin infiltration. The intrafibrillar minerals are left intact to avoid their replacement by water that is hard for adhesive resin monomers to displace. The present work reported the synthesis of a water-soluble methacryloyloxy glycol chitosan-EDTA conjugate (GCE-MA) and evaluated its potential as an extrafibrillar demineralization agent for self-etch dentin bonding.

METHODS

Glycol chitosan-EDTA was functionalized with a methacryloyloxy functionality. Conjugation was confirmed using Fourier transform-infrared spectroscopy. The GCE-MA was used to prepare experimental self-etch primers. Extrafibrillar demineralization of the primers was evaluated with scaning electron microscopy and transmission electron microscopy. The feasibility of this new self-etch bonding approach was evaluated using microtensile bond strength testing and inhibition of dentin gelatinolytic activity. The antibacterial activity and cytotoxicity of GCE-MA were also analyzed.

RESULTS

Conjugation of EDTA and the methacryloyloxy functionality to glycol chitosan was successful. The functionalized conjugate was capable of extrafibrillar demineralization of mineralized collagen fibrils. Tensile bond strength of the experimental self-etch primer to dentin was comparable to that of phosphoric acid-etched dentin and the commercial self-etch primer Clearfil SE Bond 2. The GCE-MA also inhibited soluble rhMMP-9. In-situ zymography detected minimal fluorescence in hybrid layers conditioned with the experimental primer. The GCE-MA was noncytotoxic and possessed antibacterial activities against planktonic bacteria.

SIGNIFICANCE

Synthesis of GCE-MA brought into fruition a self-etch conditioner that selectively demineralizes the extrafibrillar mineral component of dentin. A self-etch primer prepared with GCE-MA achieved bond strengths comparable to commercial reference adhesive systems.

Enhanced Bonding to Caries-Affected Dentin Using an Isocyanate-Based Primer

Dental caries is the most common oral disease and the most common cause of resin restorations. In minimally invasive dentistry, the principle behind cavity preparation is to remove external caries-infected dentin (CID) and preserve internal caries-affected dentin (CAD) and sound dentin (SD). The cavity floor is mainly composed of CAD, but the poor bonding performance of CAD has become a widespread concern. This study evaluated the performance of a new collagen-reactive monomer (ITCM) used as a primer to improve the bonding performance of CAD. The experimental specimens were grouped as follows: SD, CAD, and ITCM-pretreated CAD (CAD-ITCM). Dentin slices were obtained for attenuated total reflectance-Fourier transform infrared (ATR-FTIR) analysis. The bonded samples were subjected to microtensile bond strength analysis after 24 h of water storage or aging by thermocycling, and the bonding interface quality was evaluated by nanoleakage assessment, interfacial nanoindentation testing, and in situ zymography. Cytotoxicity experiments with ITCM were performed. ATR-FTIR showed that the isocyanate groups in ITCM can covalently bind and form hydrogen bonds with the collagen in CAD to mediate chemical bonding. ITCM pretreatment significantly improved the bond strength of CAD (P < 0.05), reduced interfacial nanoleakage, improved the sealing of the bonding interface, enhanced the homogeneity of the hybrid layer, and inhibited matrix metalloproteinase activity. In addition, ITCM presented acceptable biocompatibility for dental restorative application. Taken together, this study reported the application of ITCM to induce collagen-based chemical bonding in the CAD bonding system, which fills the gap in strategies to improve the bonding performance of CAD immediately and after aging and has important clinical application prospects.

Er:YAG Laser Physical Etching and Ultra-High-Molecular-Weight Cross-Linked Sodium Polyacrylate Chemical Etching for a Reliable Dentin Dry Bonding

Dentin bond interface stability is the key issue of dental adhesion in present clinical dentistry. The concept of selective extrafibrillar demineralization has opened a new way to maintain intrafibrillar minerals to prevent interface degradation. Here, using ultra-high-molecular-weight sodium polyacrylate [Carbopol (Carbo) > 40 kDa] as a calcium chelator, we challenge this concept and propose a protocol for reliable dentin dry bonding. The results of high-resolution transmission electron microscopy revealed periodic bands of 67 nm dentin collagen fibrils after Carbo etching, and the hydroxyproline concentration increasing with prolonged chelating time denied the concept of extrafibrillar demineralization. The results that wet and dry bonding with Carbo-based demineralization produced a weaker bond strength than the traditional phosphoric acid wet adhesion suggested that the Carbo-based demineralization is an unreliable adhesion strategy. A novel protocol of Er:YAG laser physical etching followed by Carbo chemical etching for dentin adhesion revealed that a micro-/nano-level rough, rigid, and non-collagen exposed dentin surface was produced, the micro-tensile bond strength was maintained after aging under dry and wet bonding modes, and in situ zymography and nanoleakage within the hybrid layers presented lower signals after aging. Cell culture in vitro and a rabbit deep dentin adhesion model in vivo proved that this protocol is safe and biocompatible. Taken together, the concept of extrafibrillar demineralization is limited and insufficient to use in the clinic. The strategy of Er:YAG laser physical etching followed by Carbo chemical etching for dentin adhesion produces a bonding effect with reliability, durability, and safety.

Influence of calcium-based desensitizing toothpastes on the bonding performance of universal adhesive

The study evaluated the effect of calcium-based desensitizing toothpastes on the dentinal tubule occlusion and its influence on the dentin bond strength of universal adhesive. Mid-coronal dentin samples were prepared for hypersensitivity model and treated by the following calcium-based desensitizing toothpastes: no treatment (Control), Clinpro (fTCP), Pro-Relief (Pro-Argin), and Repair & Protect (Novamin). Single Bond Universal adhesive was applied in self-etch or etch-and-rinse mode. The dentinal tubule occlusion and adhesion interface were evaluated under scanning electron microscope (SEM). A double-fluorescence technique was used to examine interfacial permeability under confocal laser scanning microscopy (CLSM). The micro-tensile bond strength (μTBS) was employed, followed by the fracture interface observation. SEM showed the toothpastes occluded dentinal tubules, and the occlusion exhibited stability against acid and abrasion. Hindered resin infiltration was observed in the adhesion interface after desensitization. CLSM showed more water permeation within or under the adhesion interface in etch-and-rinse mode than self-etch mode. Desensitization decreased the μTBS in self-etch mode. When using etch-and-rinse mode, the desensitized samples presented similar μTBS to the control group. No difference in μTBS was found between the two bonding modes, except for the control group. Calcium-based desensitizing toothpastes can effectively occlude the exposed dentinal tubules with acid-resistant and abrasion-resistant stability. The desensitization reduced the dentin bond strength of the universal adhesive system in self-etch mode but did not affect the bond strength of etch-and-rinse mode.

Enhancing adhesive-dentin interface stability of primary teeth: From ethanol wet-bonding to plant-derived polyphenol application

OBJECTIVES

To investigate whether the adhesive-dentin interface stability of primary teeth would be enhanced by epigallocatechin-3-gallate (EGCG) with ethanol wet-bonding.

METHODS

Non-caries primary molars were sliced to achieve a flat dentin surface and etched then randomly distributed into five groups in accordance with different treatments: group 1, no treatment; group 2, applying absolute ethanol wet-bonding for 60 s; groups 3-5, applying 0.1%, 0.5%, and 1% (w/v) EGCG-incorporating ethanol wet-bonding (0.1%, 0.5%, and 1% EGCG) for 60 s. Singlebond universal adhesive was then applied followed by resin composite construction. Microtensile bond strength, fracture mode, and nanoleakage at adhesive-dentin interface were evaluated after 24 h of water storage or 10,000 times of thermocycling. Zymography of hybrid layer, biofilm formation of Streptococcus mutans by CLSM, FESEM, and MTT test, and cytotoxicity by CCK-8 assay were respectively assessed.

RESULTS

Irrespective of thermocycling, the dentin bond strength was preserved with reduced nanoleakage in the 0.5% and 1% EGCG groups. Furthermore, the activity of endogenous proteases and the growth of Streptococcus mutans biofilm were inhibited after treatment with 0.5% and 1% EGCG/ethanol solutions (groups 4 and 5). CCK-8 results of the 0.1% and 0.5% EGCG groups showed acceptable biocompatibility.

CONCLUSIONS

Treatment by EGCG/ethanol solutions effectively enhanced the bond stability of primary teeth at the adhesive-dentin interface.

CLINICAL SIGNIFICANCE

Synergistic application of EGCG and ethanol wet-bonding suggesting a promising strategy to improve dentin bonding durability with bacterial biofilm inhibition, thus increasing resin-based restorations' service life in primary dentition.

Development of an Antibacterial Dentin Adhesive

Nisin is a peptide that possesses potent antibacterial properties. This study evaluated the antibacterial activity of a nisin-doped adhesive against Streptococcus mutans, as well as its degree of conversion and microtensile bond strength (μTBS) to dentin. Nisin was added to the adhesive Adper Single Bond 2 (3M ESPE), resulting in four groups: Control Group (Single Bond 2); Group 1% (1 wt% nisin-incorporated), Group 3% (3 wt% nisin-incorporated) and Group 5% (5 wt% nisin-incorporated). Antibacterial activity against S. mutans was evaluated using colony-forming unit counts (CFU). The degree of conversion was tested using FTIR. Forty human teeth were restored for μTBS evaluation. Data were statistically analyzed with ANOVA and Tukey tests at α = 0.05. The nisin-doped adhesives, for all concentrations, exhibited a significant inhibition of the growth of S. mutans (p < 0.05); Incorporation of 5% and 3% nisin decreased the degree of conversion of the adhesive (p < 0.05). The μTBS (in MPa): Control Group—38.3 ± 2.3A, Group 1%—35.6 ± 2.1A, Group 3%—27.1 ± 1.6B and Group 5%—22.3 ± 1.0C. Nisin-doped adhesives exerted a bactericidal effect on S. mutans. The μTBS and degree of conversion of adhesive were not affected after incorporation of 1% nisin.

Influence of chlorhexidine, propolis, pulpal pressure simulation, and aging on dentin bond strength

The present study evaluated the bond strength (μTBS) of dentin treated with chlorhexidine and propolis subjected to simulated pulpal pressure (SPP) and thermocycle aging. One hundred and twenty healthy human molars were sectioned to obtain 2 mm of dentin thickness and were divided into two groups (n = 60): SPP (15 cm H₂ O) and no SPP (Control group). Dentin surfaces were conditioned with 37% phosphoric acid for 15 s and were divided according to the dentin treatment (n = 20): Control; Chlorhexidine gluconate (0.2% for 30 s) and Propolis (aqueous propolis extract for 30 s). Half of the specimens were submitted to 15,000 thermocycle aging (5 ± 2°C and 55 ± 2°C). The samples were sectioned into beams and submitted to μTBS. Data were analyzed by three-way ANOVA (SPP × Dentin treatment × Thermocycle aging) and the Tukey's tests (p < .001). With regard to the SPP, ANOVA revealed that the Control group (32.98 MPa) had significantly higher values of μTBS when compared to the SPP (29.19 MPa). With regard to Thermocycle aging, no aging (34.05 MPa) had significantly higher values of μTBS when compared to the aging (28.12 MPa). With regard to the dentin treatment, Propolis and Chlorhexidine did not statistically influence the results (p > .05). The SPP and thermocycle aging negatively influenced the bond strength between the dentin and resin; the 0.2% chlorhexidine digluconate and aqueous propolis extract solutions did not interfere in the bond strength between the resin and dentin. The use of chlorhexidine and propolis as a dental treatment may not influence the dentin bond strength, but SPP and thermocycle aging may damage the longitudinal dentin bond strength.

Chlorhexidine-loaded poly (amido amine) dendrimer and a dental adhesive containing amorphous calcium phosphate nanofillers for enhancing bonding durability

OBJECTIVE

A novel method of combining chlorhexidine (CHX) loaded poly (amido amine) (PAMAM) dendrimers with a dental adhesive containing amorphous calcium phosphate (ACP) nanofillers are proposed for etch-and-rinse bonding system to enhance resin-dentin bonding durability.

METHODS

The CHX-loaded PAMAM and ACP nanofillers were synthesized and characterized. Their effects on the cytotoxicity were tested by MTT assay. Micro-tensile bond strength (μTBS) before and after thermomechanical challenges were used to evaluate the bonding durability. Anti-matrix metalloproteinase (MMPs) property was examined using in-situ zymography. A double-fluorescence technique was used to examine interfacial permeability after bonding. Dentin remineralization in Ca/P lacking solution was observed under scanning electron microscopy.

RESULTS

Compared with a 0.2 wt% CHX solution, the PAMAM loaded CHX had less cytotoxicity, while the in situ zymography showed it could still inhibit MMPs activity within the hybrid layer after released from PAMAM. The application of the novel method maintained the μTBS better than the control group after thermomechanical challenges, and it did not negatively affect water permeability of the bonding interfaces. CHX-loaded PAMAM regulated the calcium (Ca) and phosphate (P) ions provided by the ACP-containing adhesives to remineralize the demineralized dentin surfaces without initial Ca/P in the environment.

SIGNIFICANCE

The novel method can reduce the cytotoxicity of CHX, inhibit MMPs activities, maintain μTBS, and induce dentin remineralization, which are crucial factors for enhancing bonding durability.

A novel dentin bonding scheme based on extrafibrillar demineralization combined with covalent adhesion using a dry-bonding technique

Dentin bonding is a dynamic process that involves the penetration of adhesive resin monomers into the extrafibrillar and intrafibrillar demineralized collagen matrix using a wet-bonding technique. However, adhesive resin monomers lack the capacity to infiltrate the intrafibrillar space, and the excess water that is introduced by the wet-bonding technique remains at the bonding interface. This imperfectly bonded interface is inclined to hydrolytic degradation, severely jeopardizing the longevity of bonded clinical restorations. The present study introduces a dentin bonding scheme based on a dry-bonding technique, combined with the use of extrafibrillar demineralization and a collagen-reactive monomer (CRM)-based adhesive (CBA). Selective extrafibrillar demineralization was achieved using 1-wt% high-molecular weight (MW) carboxymethyl chitosan (CMCS) within a clinically acceptable timeframe to create a less aggressive bonding substance for dentin bonding due to its selectively extrafibrillar demineralization capacity. CMCS demineralization decreased the activation of in situ collagenase, improved the shrinking resistance of demineralized collagen, and thus provided stronger and more durable bonding than traditional phosphoric acid etching. The new dentin bonding scheme that contained CMCS and CBA and used a dry-bonding technique achieved an encouraging dentin bonding strength and durability with low technical sensitivity. This bonding scheme can be used to improve the stability of the resin-dentin interface and foster the longevity of bonded clinical restorations.

Effects of calcium-phosphate, laser and adhesive on dentin permeability and bond strength

Objectives

The present study examined a technique for reducing dentin permeability through the application of a calcium phosphate (CaP)-based desensitiser with a laser-assisted process and evaluated adhesive-dentin bond strength. Methods: Thirty dentin discs were divided into two groups according to whether the selected desensitiser (TeethMate; Kuraray Noritake) was used prior to dentin bonding. Each group was subdivided into three subgroups (n = 5): A- Adhesive (Single Bond Universal, 3M ESPE), AL- Adhesive + Laser (Nd:YAG 60 mJ) and LAL- Laser + Adhesive + Laser. Dentin permeability values (%) were recorded before and after desensitiser application. Resin composites were placed over the bonded specimens; the latter were aged prior to microtensile bond strength evaluation. Gelatinolytic activity within the hybrid layers was examined with in-situ zymography using confocal laser scanning microscopy. Data were analysed with ANOVA and Tukey test (α = 0.05).

Results

Significant differences in dentin permeability were identified for all groups (p = 0.00). Both laser treatment (p = 0.182) and desensitiser application (p = 0.687) did not significantly improve dentin bond strength. Ultrastructure of the resin-dentin interface identified presence of calcium phosphate within dentinal tubules. Laser treatment did not affect hybrid layer ultrastructure. Both treatment modalities (intratubular CaP occlusion and laser) had no influence on gelatinolytic activity within hybrid layers.

Conclusion

Although intratubular CaP occlusion and laser treatment were effective in reducing dentin permeability, they did not affect bond strength, interfacial ultrastructure and gelatinolytic activity within hybrid layers.

Clinical relevance

Treatment of etched dentin with Nd:YAG Laser at 60 mJ does not adversely affect collagen ultrastructure and gelatinolytic activity within the hybrid layer. The application of a calcium phosphate-based desensitiser to etch dentin does not affect dentin bond strength.

Effects of resveratrol/ethanol pretreatment on dentin bonding durability

To determine the effects of resveratrol/ethanol solution on the durability of resin-dentin bonding interfaces. Sixty-four non-caries third molars were randomly divided into four groups (n = 16) after sectioning, and then pretreated with one of the following concentrations of resveratrol/ethanol solutions: 0 (control group), 1, 10 and 20 mg/mL, followed by a universal adhesive and resin composites. All microtensile samples were divided into three subgroups: immediate group, collagenase ageing group and thermocycled group. The microtensile bond strength (MTBS), failure modes, interfacial nanoleakage and in situ zymography were measured, whereas the inhibitory effects of pretreated dentin slices on S. mutans biofilms were determined by confocal laser scanning microscopy and MTT assay. The results indicated that bonding strength was not only influenced by pretreatment factors (P < 0.05) but also ageing factors (P < 0.05). Regardless of collagenase ageing or thermocycling, the 10 mg/mL resveratrol/ethanol pretreatment group presented significantly higher (P < 0.05) MTBS and lower (P < 0.05) expression of nanoleakage than the control group, showed better inhibitory effect of matrix metalloproteinases and S. mutans activity with acceptable cytotoxicity. Meanwhile, cohesive failure in dentin decreased gradually with increasing resveratrol concentration. Therefore, the resveratrol/ethanol solution had the potential to serve as a versatile dentin primer, which can effectively improve dentin bonding durability and prevent secondary caries.

Evaluation of a Collagen-Reactive Monomer with Advanced Bonding Durability

This study evaluated the use of a new collagen-reactive monomer (CRM), isocyanate-terminated urethane methacrylate precursor, which has covalent affinity to dental collagen, in the formation of dentin-resin bonds and compared it with 2 other dental adhesives. Dentin specimens were bonded with either the CRM-based adhesive (CBA), One-Step (OS; Bisco, Inc.), or a negative adhesive (NA) control and subjected to 24-h storage in water, thermocycling to simulate 1-y clinical function, or a matrix metalloproteinase-mediated aging process. We tested the microtensile bond strength (µTBS), characterized the bonding interface with an atomic force microscope, conducted micro-Raman analysis, and performed leakage tests and in situ zymography. CBA and OS exhibited comparable bonding strength after 24 h (P > 0.05); however, there was a sharp decrease in µTBS after aging for all except CBA (P < 0.001). Raman spectra results indicated increased collagen crosslinking and chemical reaction between the adhesive and collagen in the CBA group. CBA achieved high-quality hybridization with collagen, improving mechanical properties and integrity, and decreased the enzyme-mediated degradation of the bonding interface by inhibiting collagenolytic activity. With the promising bonding durability of coapplied CBA, CRM may be the first dental adhesive to provide strong and long-lasting resin-dental collagen bonding without the additional conditioning step. The use of CBA results in high-quality hybrid layers that protect the resin-dentin interface from harmful biological and chemical activities commonly occurring in the oral environment.

Degree of Conversion Contributes to Dentin Bonding Durability of Contemporary Universal Adhesives

Clinical Relevance

The degree of conversion of contemporary universal adhesives positively correlates with the bond strength to dentin. The correlation is more marked after thermocycling, suggesting that a high degree of conversion is required for long-term dentin bonding durability.

SUMMARY

Purpose: The objectives of this study were to evaluate the micro-tensile bond strength (μTBS) of five contemporary universal adhesives to dentin after 24 hours and thermocycling (TC), to measure their degrees of conversion (DC) and to test the correlation between μTBS and DC.

Methods and Materials: Four commercially available universal adhesives, Prime&Bond universal (PBU), Ecosite Bond (EB), G-Premio Bond (GPB), and Clearfil Universal Bond Quick (UBQ), and one experimental adhesive, UBQ without an amide monomer (UBQ-A), were used in this study. For the μTBS test, midcoronal dentin of 50 human molars was exposed, ground using 600-grit SiC paper, and the adhesives were applied according to the manufacturers’ instructions. After resin-composite buildup and 24-hour water storage, one-half of the specimens were subjected to 15,000 thermal cycles. The specimens were sectioned into beams and stressed in tension at a crosshead speed of 1 mm/min until failure. The DC of adhesives applied to dentin was evaluated using attenuated total reflectance Fourier-transform infrared spectroscopy immediately after light-curing. All data were statistically analyzed at a significance level of 0.05.

Results: The highest μTBSs were obtained with UBQ, UBQ-A, and PBU, which were not significantly different from each other both after 24 hours and TC. The μTBS of GPB was lower compared with the aforementioned adhesives, but significantly only after TC, and the lowest μTBSs were obtained with EB. TC did not affect the μTBSs of UBQ, UBQ-A, and PBU significantly, but a significant decrease was observed with GPB and EB. The highest DC was obtained with PBU and UBQ, followed by 2-hydroxyethyl methacrylate–rich adhesives UBQ-A and EB, which exhibited significantly lower DCs. The DC of GPB could not be determined because the reference peak at 1608 cm−1 was not detected in its spectra. A significant positive correlation was shown between μTBS and DC after 24 hours (r=0.716) and TC (r=0.856).

Conclusion: μTBS and DC were positively correlated, more markedly after TC, which suggests that DC may be an important factor for bond durability.

Chitosan-Based Extrafibrillar Demineralization for Dentin Bonding

Instability of resin-dentin bonds is the Achilles’ heel of adhesive dentistry. To address this problem, a chelate-and-rinse extrafibrillar dentin demineralization strategy has been developed that keeps intrafibrillar minerals within collagen fibrils intact to prevent activation of endogenous proteases that are responsible for collagen degradation within hybrid layers. The objective of the present study was to evaluate the potential of using chitosan >40 kDa as an antimicrobial extrafibrillar dentin-chelating agent to enhance bond durability. Transmission electron microscopy provided evidence for retention of intrafibrillar minerals and smear plugs in dentin conditioned with 1 wt% chitosan. Analyzed by Kruskal-Wallis analysis of variance, Dunn’s statistic, and separate Mann-Whitney tests, tensile bond strengths to wet- and dry-bonded dentin indicated that chelating dentin with chitosan for 60 s prior to bonding did not result in a significant decline in resin-dentin bond strength when compared with that of phosphoric acid etching ( P > 0.05). Gelatinolytic activity within the hybrid layers was examined via in situ zymography after 24-h storage or after thermomechanical cycling and analyzed with 3-factor analysis of variance. After 24 h, enzymatic activity was detected only within completely demineralized phosphoric acid–etched dentin, with values derived from dry bonding significantly higher than those derived from wet bonding ( P < 0.05). Negligible fluorescence was detected within hybrid layers when dentin was conditioned with chitosan, even after thermomechanical cycling, as compared with the controls. Reduction in water permeability in chitosan-conditioned dentin, attributed to smear plug retention, also fostered long-term bond stability. Antibacterial testing performed with live/dead staining indicated that the acetic acid–solubilized chitosan possessed antibacterial activities against 3 single-species biofilms: Streptococcus mutans, Actinomyces naeslundii, and Enterococcus faecalis. Taken together, the new chitosan-based extrafibrillar demineralization strategy retains intrafibrillar minerals, reduces endogenous protease-initiated collagen degradation, prevents water permeation within hybrid layers, and kills bacteria on dentin surfaces, which are crucial factors for enhancing resin-dentin bond durability.