Experimentation and numerical modeling of cyclic voltammetry for electrochemical micro-sized sensors under the influence of electrolyte flow

An innovative experimental and mathematical approach in electrochemical sensing for mapping a drug sensor landscape

Our study delves into the examination of an electrochemical sensor through both experimentation and mathematical analysis. The sensor demonstrates the ability to identify a specific antipsychotic medication, namely Chlorpromazine Hydrochloride (CPH), even at incredibly low concentrations, reaching the picomolar level. The identification process relies on the utilization of a Glassy Carbon Electrode (GCE) that has been modified with a ceria-doped zirconia (CeO2/ZrO2) nanocomposite. The nanocomposite was synthesized using the co-precipitation technique and extensively characterized through various analytical methods. It is crucial to detect the presence of CPH as an overdose can result in hyperactivity and severe bipolar disorders among both children and adults. The average size of the nanocomposite was estimated to be 10 nm. The electrode surface area after CeO2/ZrO2 modification of the GCE was found to be 0.059 cm2, which was significantly higher than the electrode surface area of the bare GCE (0.0307 cm2). The limit of detection and limit of quantification for CPH were calculated to be 99.3 pM and 3.010 nM, respectively, with the linear dynamic range of CPH detection found to be between 0.10 and 1.90 μM. The modified sensor electrode was tested on human urine samples with good recoveries and exhibited high selectivity, repeatability, reproducibility, and long-term stability. The experimental voltammograms and the simulated stochastic voltammograms exhibited a fair amount of agreement. Examination of the experimental findings alongside analytical and numerical solutions enables a comprehensive analysis of the factors influencing the outcome of electrochemical measurements. The precise findings can be leveraged for the development of efficient sensing devices for medical diagnostics and environmental monitoring.

Preparation of electrochemical sensor based on glassy carbon electrode and its specificity and sensitivity for directional detection of antibiotic resistance genes spreading in the water environment

Antibiotic-resistant bacteria/resistance genes (ARB/ARGs) have been paid much attention due to the environmental risks they might bring. They were demonstrated to be widespread in surface water and wastewater. Determining the concentrations of ARGs is the first step to evaluate the degree of pollution. In this study, electrochemical detection technology was studied due to its advantages of low cost, fast response, and satisfactory selectivity. Additionally, the electrochemical sensor technology was used to determine the concentration of a ubiquitous ARG (ampicillin gene bla_TEM) in the water environment. A kind of electrochemical sensor was prepared on a glassy carbon electrode (GCE). The results of X-ray photoelectron spectroscopy (XPS) and cyclic voltammetry (CV) curves indicated that the single-stranded DNA (ssDNA) probe can be successfully immobilized on the surface of the GCE. In addition, the performance of hybridization between the ssDNA probe and the target DNA at diverse temperatures was compared, of which 35 °C was the optimum. Moreover, the change of charge transfer resistance (ΔRct) for the GCE sensor hybridizing with complementary DNA was much higher than that of DNA with the mismatched base, which indicated that the electrochemical sensor prepared in this study was specific. The sensitivity of the sensor was also proved by the strong correlation between the concentrations of ARGs and ΔRct (with the correlation coefficient (R²) of 0.9905). All in all, this study is meaningful for the comprehend on the detection of ARGs through the electrochemical method.

Design and Finite Element Model of a Microfluidic Platform with Removable Electrodes for Electrochemical Analysis

A microfluidic platform for hydrodynamic electrochemical analysis was developed, consisting of a poly(methyl methacrylate) chip and three removable electrodes, each housed in 1/16" OD polyether ether ketone tube which can be removed independently for polishing or replacement. The working electrode was a 100-μm diameter Pt microdisk, located flush with the upper face of a 150 μm × 20 μm × 3 cm microchannel, smaller than previously reported for these types of removable electrodes. A commercial leak-less reference electrode was utilized, and a coiled platinum wire was the counter electrode. The platform was evaluated electrochemically by oxidizing a potassium ferrocyanide solution at the working electrode, and a typical limiting current behavior was observed after running linear sweep voltammetry and chronoamperometry, with flow rates 1-6 μL/min. While microdisk channel electrodes have been simulated before using a finite difference method in an ideal 3D geometry, here we predict the limiting current using finite elements in COMSOL Multiphysics 5.3a, which allowed us to easily explore variations in the microchannel geometry that have not previously been considered in the literature. Experimental and simulated currents showed the same trend but differed by 41% in simulations of the ideal geometry, which improved when channel and electrode imperfections were included.