Bimetallic gold-nickel nanoparticles as a sensitive amperometric sensing platform for acetaminophen in human serum

A systematic review on electrochemical sensors for the detection of acetaminophen

Considerable progress has been made in the electrochemical determination of acetaminophen (AP) over the past few decades. Nanomaterials or enzymes as electrode modifiers greatly improve the performance of AP electrochemical sensors. This review focuses on the development potential, detection principles and techniques for the electrochemical analysis of AP. In particular, the design and construction of AP electrochemical sensors are discussed from the perspective of non-enzyme materials (such as nanomaterials, including precious metals, transition metals and non-metals) and enzyme substances (such as aryl acylamidase, polyphenol oxidase and horseradish peroxidase). Moreover, the influencing factors for AP electrochemical sensors and the simultaneous detection of AP and other targets are summarized, and the future prospective of AP electrochemical sensors is outlined. This review provides a reference and guidance for the development and application of electrochemical sensors for AP detection.

Gold nanoparticles capped with L-glycine, L-cystine, and L-tyrosine: toxicity profiling and antioxidant potential

Biomolecules-based surface modifications of nanomaterials may yield effective and biocompatible nanoconjugates. This study was designed to evaluate gold nanoconjugates (AuNCs) for their altered antioxidant potential. Gold nanoparticles (AuNPs) and their conjugates gave SPR peaks in the ranges of 512-525 nm, with red or blueshift for different conjugates. Cys-AuNCs demonstrated enhanced (p < 0.05) and Gly-AuNCs (p > 0.05) displayed reduced DPPH activity. Gly-AuNCs and Tyr-AuNCs displayed enhanced ferric-reducing power and hydrogen peroxide scavenging activity, respectively. Cadmium-intoxicated mice were exposed to gold nanomaterials, and the level of various endogenous parameters, i.e., CAT, GST, SOD, GSH, and MTs, was evaluated. GSH and MTs in liver tissues of the cadmium-exposed group (G2) were elevated (p < 0.05), while other groups showed nonsignificance deviations than the control group. It is concluded that these nanoconjugates might provide effective nanomaterials for biomedical applications. However, more detailed studies for their safety profiling are needed before their practical applications.

Nanomaterials-based portable electrochemical sensing and biosensing systems for clinical and biomedical applications

Miniaturized electrochemical sensing systems are employed in day-to-day uses in the several area from public health to scientific applications. A variety of electrochemical sensor and biosensor systems may not be effectively employed in real-world diagnostic laboratories and biomedical industries due to their limitation of portability, cost, analytical period, and need of skilled trainer for operating devices. The design of smart and portable sensors with high sensitivity, good selectivity, rapid measurement, and reusable platforms is the driving strength for sensing glucose, lactate, hydrogen peroxide, nitric oxide, mRNA, etc. The enhancement of sensing abilities of such sensor devices through the incorporation of both novel sensitive nanomaterials and design of sensor strategies are evidenced. Miniaturization, cost and energy efficient, online and quantitative detection and multiple sensing ability are the beneficial of the nanostructured-material-based electrochemical sensor and biosensor systems. Owing to the discriminating catalytic action, solidity and biocompatibility for designing sensing system, nanoscale materials empowered electrochemical detection systems are accomplished of being entrenched into/combined with portable or miniaturized devices for specific applications. In this review, the advance development of portable and smart sensing/biosensing systems derived from nanoscale materials for clinical and biomedical applications is described.

Graphical Abstract

AuCo nanoparticles: ordering, magnetisation, and morphology trends predicted by DFT

The rapid development of applications relying on magnetism at the nanoscale has put a spotlight on nanoparticles with novel morphologies that are associated with enhanced electronic and magnetic properties. In this quest, nanoalloys combining highly magnetic cobalt and weakly reactive gold could offer many application-specific advantages, such as strong magnetic anisotropy. In the present study, we have employed density functional theory (DFT) calculations to provide a systematic overview of the size- and morphology-dependence of the energetic order and magnetic properties of AuCo nanoparticles up to 2.5 nm in diameter. The core-shell icosahedron was captured as the most favourable morphology, showing a small preference over the core-shell decahedron. However, the magnetic properties (total magnetic moments and magnetic anisotropy) were found to be significantly improved within the L1₀ ordered structures, even in comparison to monometallic Co nanoparticles. Atom-resolved charges and orbital moments accessed through the DFT analysis of the electronic level properties permitted insight into the close interrelation between the AuCo nanoparticle morphology and their magnetism. These results are expected to assist in the design of tailored magnetic AuCo nanoalloys for specific applications.

Computational Characterization of the Intermixing of Iron Triade (Fe, Co, and Ni) Surfaces and Sub-nanometric Clusters with Atomic Gold

Dispersion-corrected density functional theory (DFT-D3) is applied to model iron triade (Fe, Co, and Ni) surfaces upon exchange of surface atoms with atomic gold. One first goal is to analyze the contact problem at the triade surface-Au interface and to correlate our findings with recent observations on iron triade nanoparticles (with diameters of around 5 nm) passivated by a few layers of gold. For this purpose, we analyze: (1) the energies of substitution; (2) the restructuring of the iron triade surfaces upon the atomic exchange; (3) the density of the orbitals bearing the largest projection on d(Au) atomic orbitals and, particularly, their overlap with orbitals from neighboring atoms of the triade surfaces; (4) the modification of the electronic density of states; and (5) the redistribution of the electronic density upon intermixing of Au and triade atoms. Inspite of the similarities between Ni, Co, and Fe in the condensed phase, significant differences are found in the features characterizing the exchange process. In particular, we find a better integration of the Au atom on the substitutional site of the Ni(001) surface than on those of the Fe(001) and Co(001) surfaces. This is in agreement with the fact that the electronic density of states is almost indistinguishable before and after Ni-Au intermixing. This outcome is correlated with the experimental observation on the allowing transition of Ni-Au core-shell nanoparticles before reaching the melting temperature. Our second objective is to explore the Au-triade atom intermixing process in sub-nanometric clusters, finding that it is energetically more favored than at solid surfaces yet endothermic at 0 K. This feature is explained as the result of the structural fluxionality characterizing clusters at the sub-nanometer scale. Entropy contributions make mixed Au-Ni clusters more stable than the unmixed counterpart already at 650 K while unmixed Co clusters remain energetically more favored up to 1295 K and iron clusters are predicted to be stable against intermixing over the experimentally relevant range of temperatures (up to 1100 °C). Remarkably, the net charge donated from the three triade atoms to atomic gold upon intermixing is similar in triade sub-nanometeric clusters and at extended triade surfaces. Gold clusters are prone to host Fe, Co, and Ni atoms at the center of their structures and the exchange process is predicted to be exothermic at 0 K even for a small cluster made of 13 atoms. More generally, our work highlights the importance of the polarity of the chemical bond between unlike metal atoms in alloys.

Preparation of IgG imprinted polymers by metal-free visible-light-induced ATRP and its application in biosensor

Immunoglobulin G (IgG) is related to the occurrence of many diseases, such as measles and inflammatory. In this paper, IgG imprinted polymers (IgGIPs) were fabricated on the surface of nano Au/nano Ni modified Au electrode (IgGIPs/AuNCs/NiNCs/Au) via metal-free visible-light-induced atom transfer radical polymerization (MVL ATRP). The IgGIPs were prepared by IgG conjugated with fluorescein isothiocyanate (FITC-IgG) as both a template and a photocatalyst. After the templates were removed, the photocatalysts (FITC) would not remain in the polymer and avoided all the effect of catalysts on the electrode. The fabricated electrodes were examined by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS). Under the optimized conditions, IgGIPs/AuNCs/NiNCs/Au was prepared and used as an electrochemical biosensor. The biosensor could be successfully applied for the determination of IgG by differential pulse voltammetry (DPV) measurement. The results showed that the proposed biosensor displayed a broader linear range and a lower detection limit for IgG determination when it was compared to those similar IgG sensors. The linear range from 1.0 × 10-6 mg L-1 to 1.0 × 101 mg L-1 was obtained with a low detection limit (LOD) of 2.0 × 10-8 mg L-1 (S/N = 3). Briefly, the biosensor in this study introduced an easy and non-toxic method for IgG determination and also provided a progressive approach for designing protein imprinted polymers.

Non-Enzymatic Glucose Detection Based on NiS Nanoclusters@NiS Nanosphere in Human Serum and Urine

Herein, we report a non-enzymatic electrochemical glucose sensing platform based on NiS nanoclusters dispersed on NiS nanosphere (NC-NiS@NS-NiS) in human serum and urine samples. The NC-NiS@NS-NiS are directly grown on nickel foam (NF) (NC-NiS@NS-NiS|NF) substrate by a facile, and one-step electrodeposition strategy under acidic solution. The as-developed nanostructured NC-NiS@NS-NiS|NF electrode materials successfully employ as the enzyme-mimic electrocatalysts toward the improved electrocatalytic glucose oxidation and sensitive glucose sensing. The NC-NiS@NS-NiS|NF electrode presents an outstanding electrocatalytic activity and sensing capability towards the glucose owing to the attribution of great double layer capacitance, excessive electrochemical active surface area (ECASA), and high electrochemical active sites. The present sensor delivers a limit of detection (LOD) of ~0.0083 µM with a high sensitivity of 54.6 µA mM-1 cm-2 and a wide linear concentration range (20.0 µM-5.0 mM). The NC-NiS@NS-NiS|NF-based sensor demonstrates the good selectivity against the potential interferences and shows high practicability by glucose sensing in human urine and serum samples.

Nano-sized Metal and Metal Oxide Modified Electrodes for Pharmaceuticals Analysis

:

The electrochemical analysis offers a number of important advantages such as providing information on pharmaceuticals analysis and their in vivo redox processes and pharmacological activity. The interest in developing electrochemical sensing devices for use in clinical assays is growing rapidly. Metallic nanoparticles can be synthesized and modified with various chemical functional groups, which allow them to be conjugated with antibodies, ligands, and drugs of interest.

:

In this article, the novel developments to enhance the performance of sensor modified with metal nanoparticles of pharmaceuticals were reviewed. A discussion of the properties of metal nanostructures and their application in drug analysis is presented. Their application as a modifier agent in determining low levels of drugs in pharmaceutical dosage forms and biological samples is discussed. It has been found that the electrocatalytic effect of the electrode, sensitivity and selectivity were increased using various working electrodes modified with nano-sized metal, metal oxide and metal/metal oxide particles.

Metal-organic framework precursors derived Ni-doping porous carbon spheres for sensitive electrochemical detection of acetaminophen

The sensitive and selective determination of acetaminophen (AP) in the human body is highly desirable to ensure human health. In this work, nickel-doping nanoporous carbon (Ni/C) was fabricated by directly calcining Ni based metal-organic framework (Ni-MOF). The Ni/C based electrochemical sensor was developed for sensitive and selective determination of AP in human blood serum and urine samples. The prepared Ni/C composite possess plentiful catalytic active sites, ordered mesoporous structure and large specific surface area, which endow the constructed Ni/C sensor with a prominent performance for acetaminophen sensing. Under the optimal conditions, the developed method offered good linearity in the range of 0.20-53.75 μM with a low detection limit (S/N = 3) of 4.04 × 10^-2 μM. The electrocatalytic performance of the sensor towards AP was further measured by differential pulse voltammetry and cyclic voltammetry. The results demonstrated that the Ni/C sensor can be feasibly employed for the determination of AP in human blood serum and urine samples with excellent anti-interference stability and good reproducibility. The research reveals a great promising of the Ni/C electrochemical sensor for clinical applications and paves a way for the construction of high-performance electrochemical sensors for AP determination.

Metal Nanocomposites Based Electrochemical Sensor Platform for few Emerging Biomarkers

:

Design of high-performance electrochemical sensor and biosensor platforms has attracted much devotion for the sensitive and selective detection of emergent biomarkers. Electrochemical sensor offers numerous advantageous features include cost-effective and ease of miniaturization, rapid and online monitoring, simultaneous detection ability, etc., which have captivated the potential interdisciplinary research. In this review, the advances and challenges towards the electrochemical detection of emergent biomarkers such as hydrogen peroxide, nitric oxide, β-nicotinamide adenine acetaminophen, dinucleotide (NADH) in biofluids are highlighted based on the recent research outcomes. In fact, the effective utility and benefits of transition metal nanocomposites without the utilization of biological materials, including enzymes, antibodies, etc. as electrode materials towards the detection of selected biomarkers in practical biofluids, monitoring early-stage and diagnosis of disease related biomarkers, are also described. These promising metal nanomaterials based electrochemical sensor platforms concrete the tactic for a new generation of sensing devices.

Thermally Induced Diffusion and Restructuring of Iron Triade (Fe, Co, Ni) Nanoparticles Passivated by Several Layers of Gold

The temperature-induced structural changes of Fe-, Co-, and Ni-Au core-shell nanoparticles with diameters around 5 nm are studied via atomically resolved transmission electron microscopy. We observe structural transitions from local toward global energy minima induced by elevated temperatures. The experimental observations are accompanied by a computational modeling of all core-shell particles with either centralized or decentralized core positions. The embedded atom model is employed and further supported by density functional theory calculations. We provide a detailed comparison of vacancy formation energies obtained for all materials involved in order to explain the variations in the restructuring processes which we observe in temperature-programmed TEM studies of the particles.

Novel ratiometric electrochemical sensor for no-wash detection of fluorene-9-bisphenol based on combining CoN nanoarrays with molecularly imprinted polymers

No-wash detection of small molecules in real samples has been attracting attention in the field of sensors including electroanalytical biosensors. Based on the direct electrochemical oxidation of fluorene-9-bisphenol (BHPF) on a CoN nanoarray electrode, we developed a ratiometric molecularly imprinted polymeric electrochemical (MIP-EC) sensor to realize no-wash detection of BHPF in serum and tap water. The CoN nanoarray in situ grown on carbon cloth (CC) served as the working electrode, which could load the electroactive toluidine blue (TB) and be modified by the MIPs. As the MIP concentration on the modified electrode surface was increased, the amount of BHPF exposed on the electrode surface increased and the amount of exposed TB decreased. Thus, the values of ΔI_TB and ΔI_BHPF decreased and increased, respectively, with an increasing amount of BHPF. Therefore, a ratiometric strategy was established by using the value of ΔI_TB/ΔI_BHPF as the instruction response to realize detection of BHPF with high sensitivity and reliability. The developed ratiometric MIP-EC sensor showed strong anti-interference ability, good detection reproducibility and stability towards no-wash detection of BHPF as shown from tests with real samples. This work can further provide theoretical and practical guidance for the detection of other familiar small molecules.

Simultaneous detection of paracetamol and 4-aminophenol at nanomolar levels using biocompatible cysteine-substituted phthalocyanine

Extension of the conjugation and biocompatibility of the phthalocyanine molecule is expected to improve its stability and interaction with bio-molecules without any fouling.

Effects of the Core Location on the Structural Stability of Ni-Au Core-Shell Nanoparticles

Structural changes of Ni-Au core-shell nanoparticles with increasing temperature are studied at atomic resolution. The bimetallic clusters, synthesized in superfluid helium droplets, show a centralized Ni core, which is an intrinsic feature of the growth process inside helium. After deposition on SiN _x , the nanoparticles undergo a programmed temperature treatment in vacuum combined with an in situ transmission electron microscopy study of structural changes. We observe not only full alloying far below the actual melting temperature, but also a significantly higher stability of core-shell structures with decentralized Ni cores. Explanations are provided by large-scale molecular dynamics simulations on model structures consisting of up to 3000 metal atoms. Two entirely different diffusion processes can be identified for both types of core-shell structures, strikingly illustrating how localized, atomic features can still dictate the overall behavior of a nanometer-sized particle.

Ultrasensitive Detection of 2,4-Dinitrophenol Using Nanowire Biosensor

The method for the detection of 2,4-dinitrophenol (DNP) in solution is proposed. This method employs the sensors based on silicon nanowire field-effect transistors with protective layers of high-k dielectrics, whose surface is functionalized with an amino silane. Direct highly sensitive detection of DNP has been demonstrated, and the lowest detectable concentration of DNP was determined to be 10−14 M. Silicon-on-insulator nanowire (SOI-NW) sensors can well be employed for the rapid detection of a wide range of toxic and explosive compounds by selection of sensor surface modification techniques.