A DNA electrochemical biosensor based on homogeneous hybridization for the determination of Cryptococcus neoformans

Label-Free Ratiometric Homogeneous Electrochemical Strategy Based on Exonuclease III-Aided Signal Amplification for Facile and Rapid Detection of miR-378

MiR-378 is abnormally expressed in various cancers, such as hepatocellular carcinoma, renal cell carcinoma, and nonsmall cell lung cancer. Here, we developed a label- and immobilization-free ratiometric homogeneous electrochemical strategy based on exonuclease III (Exo III) for the facile and rapid determination of miR-378. Two 3'-protruding hairpin DNA probes (HPs) are designed in this strategy. Doxorubicin (DOX) and potassium ferrocyanide (Fe2+) were used as label-free probes to produce a response signal (IDOX) and a reference signal (IFe2+) in the solution phase. When no target was present in the solution, the HP was stable, most of the DOX was intercalated in the stem of the HP, and the diffusion rate of DOX was significantly reduced, resulting in reduced electrochemical signal response. When miR-378 was present, double-cycle signal amplification triggered by Exo III cleavage was initiated, ultimately disrupting the hairpin structures of HP1 and HP2 and releasing a large amount of DOX into the solution, yielding a stronger electrochemical signal, which was low to 50 pM. This detection possesses excellent selectivity, demonstrating high application potential in biological systems, and offers simple and low-cost electrochemical detection for miR-378.

Highly specific and sensitive sandwich-type electrochemiluminescence biosensor for HPV16 DNA detection based on the base-stacking effect and bovine serum albumin carrier platform

The detection of specific DNA sequences and the identification of single nucleotide polymorphisms are important for disease diagnosis. Herein, by combining the high specificity of the base-stacking effect with the high reproducibility of bovine serum albumin (BSA) modified electrodes and the high loading performance of DNA nanoclews (DNA NCs), a novel sandwich-type electrochemiluminescence (ECL) biosensor is reported for the highly specific detection of HPV16 (chosen as the model target). The capture probes are loaded by BSA carrier platforms modified on the gold electrode surface to improve reproducibility. DNA NCs loaded with a large amount of Ru(phen)32+ worked as signal probes. The template probe is composed of the complementary strand of the target and two free nucleic acid anchors at the head and tail. In the presence of the target DNA, the template probes can form stacked base pairs with target, generating high base-stacking energy. This results in the shorter free anchors of template probes being able to bind to the capture and signal probes. This eventually forms a sandwich structure that allows Ru(phen)32+ to be near the electrode surface, producing an ECL signal. There is a linear relationship between the signal and the target concentration range from 10 fM to 100 pM, with a detection limit of 5.03 fM (S/N=3). Moreover, the base-stacking effect has single base recognition ability for base pairs, effectively avoiding false positive signals. The results of this strategy for clinical samples are consistent with classical methods.

Highly Reproducible and Sensitive Electrochemiluminescence Biosensors for HPV Detection Based on Bovine Serum Albumin Carrier Platforms and Hyperbranched Rolling Circle Amplification

Most DNA-based electrochemiluminescence (ECL) biosensors are established through the self-assembly of thiolated single-stranded DNA (ssDNA) probes on the Au electrode surface. Because of this random assembly process, a significant discrepancy exists in the distribution of a modified DNA film on different electrodes, which greatly affects the reproducibility of a biosensor. In this study, a porous bovine serum albumin (BSA) layer was first modified on the electrode surface, which can improve the position distribution and spatial orientation of the self-assembly ssDNA probe. It was then coupled with hyperbranched rolling circle amplification to develop the high-reproducibility-and-sensitivity ECL biosensor for human papillomavirus 16 E6 and E7 oncogene detection. In the presence of the target DNA, the surface of the electrode accumulates abundant amplified products through reaction, which contain double-stranded DNA (dsDNA) fragments of different lengths, followed by plentiful dichlorotris (1,10-phenanthroline) ruthenium(II) hydrate (Ru(phen)₃²⁺, acting as an ECL indicator) insertion into grooves of dsDNA fragments, and a strong signal can be detected. There is a linear relationship between the signal and the target concentration range from 10 fM to 15 pM, and the detection limit is 7.6 fM (S/N = 3). After the BSA modification step, the relative standard deviation was reduced from 9.20 to 3.96%, thereby achieving good reproducibility. The proposed ECL strategy provides a new method for constructing high-reproducibility-and-sensitivity ECL biosensors.

A homogeneous electrochemical DNA sensor on the basis of a self-assembled thiol layer on a gold support and by using tetraferrocene for signal amplification

An unmodified electrochemical biosensor has been constructed, which can directly detect DNA in homogeneous solution. The synthesized new compound tetraferrocene was used for signal amplification. The dual-hairpin probe DNA was tagged with a tetraferrocene at the 3' terminal and a thiol at the 5' terminal. Without being hybridized with target DNA, the loop of probe prevented the thiol from contacting the exposed gold electrode surface with an applied potential. After hybridization with the target DNA, the loop-stem structure of the probe was opened, which led to the formation of the hairpin DNA structure. Afterwards, the thiol easily contacted the electrode and accomplished potential-assisted Au-S self-assembly. Its current signal depends on the concentration of target DNA in the 1.8 × 10-13 to 1.8 × 10-9 M concentration range, and the detection limit is 0.14 pM. The technique is a meaningful study because of its high selectivity and sensitivity. Graphical abstract Schematic diagram of the electrochemical DNA sensor operation. Target DNA and probe DNA hybridization, resulting in the disappearance of the steric hindrance of the probe stem ring. A higher signal was generated when tetraferrocene reached the electrode. The electrochemical signals were determined by differential voltammetric pulses (DPV).

A novel ligase chain reaction-based electrochemical biosensing strategy for highly sensitive point mutation detection from human whole blood

Challenged by the detection of trace amounts of mutants and disturbance from endogenous substances in clinical samples, herein, we present a novel electrochemical biosensor based on ligase chain reaction (eLCR) via the thermostable ligase with high mutation recognizing ability. The lengthened double-stranded DNAs exponentially generated via LCR were uniformly distributed on a bovine serum albumin-modified gold electrode, in which the phosphate buffer was tactfully added to remove adsorbed uninterested-probes, and thereafter the amperometry current was collected for the specific binding of streptavidin-poly-HRP and subsequent catalysis in the 3, 3', 5, 5'-tetramethylbenzidine substrate that contained hydrogen peroxide. It found that, under optimized conditions, the proposed biosensor exhibited a high selectivity of mutant targets from the 10⁴-fold excess of co-existent wild targets within a detection limit of 0.5 fM. Impressively, without the involvement of pre-PCR, the homozygous mutants were specifically distinguished from the wild genotype of CYP2C19*2 allele in human whole blood samples. Therefore, the proposed eLCR, due to its advantages in simple primer design, operational ease and ease of miniaturization, has demonstrated its considerable potential for point-of-care testing in the diagnosis of point mutation-related diseases and personalized medicine.

Ultrasensitive Electrochemical Biosensor Developed by Probe Lengthening for Detection of Genomic DNA in Human Serum

As an alternative to most of the reported nucleic acid amplification-based electrochemical DNA biosensors used for detection of trace levels of genomic DNA, we herein present a novel detection concept. The proposed system involves the conversion of two short double-stranded DNAs (dsDNAs), labeled with a thiol-tag or biotin-tag, into a single integrated dsDNA containing thiol and biotin at both terminals in the presence of target DNA through ligase chain reaction (LCR) and followed by the immobilization of these integrated dsDNAs on a bovine serum albumin (BSA)-modified gold electrode surface. Owing to rapid depletion of the two short dsDNAs via LCR, the integrated dsDNAs were generated in an exponential manner so that this sensoring approach offered a limit of detection of 25 yoctomoles (15 copies in 50 μL sample volumes), a high discrimination of single-base mismatch and a wide linear concentration range (across 6 orders of magnitude) for target DNA. Significantly, the proposed sensor, which has simplicity in operation and ease of miniaturization, detected the target of interest in total nucleic acid extracts derived from clinical serum samples with excellent results, thereby demonstrating its considerable diagnostic potential in fields ranging from virus detection to the diagnosis of genetic diseases.