Label-free electrochemical immunosensor for sensitive HER2 biomarker detection using the core-shell magnetic metal-organic frameworks

HER-2-Targeted Electrochemical Sensors for Breast Cancer Diagnosis: Basic Principles, Recent Advancements, and Challenges

In this literature review, methods for the detection of breast cancer biomarkers and the operation of electrochemical sensors are considered. The work of sensors in the determination of breast cancer biomarkers was systematized, a comparative table with other methods was compiled, as was a classification of sensors depending on their intended use. The various traditional methods for the diagnosis of breast cancer biomarkers are described, including mammography, ultrasound, magnetic resonance imaging, positron emission computed tomography, computed tomography, single-photon emission computed tomography, and biopsy, and their advantages and disadvantages are presented. Key sensor parameters for the detection of breast cancer biomarkers are compared, such as the detection limit, linear detection range, response time, sensitivity, and other characteristics depending on the analyte being analyzed. Based on the reviewed scientific papers, the significance of electrochemical sensors in detecting the biomarkers of breast cancer is demonstrated. The types of tumor biomarkers identified by biosensors were analyzed, with a particular focus on HER2. Studies on HER2 detection using electrochemical methods are compared and systematized, and the features of electrochemical biosensors for determining this biomarker are characterized. Possible interfering agents affecting the accuracy of HER2 determination under experimental conditions are considered, their mechanisms of action are analyzed, and ways to eliminate them are proposed. This report provides a summary of the current aspects of scientific research on electrochemical sensors for the detection of breast cancer biomarkers. The development of electrochemical biosensors opens up new prospects for the early diagnosis and prognosis of breast cancer treatment.

An electrochemical biosensor using AuNPs-Ti3C2Tx and ARGET ATRP reactions as signal amplification strategies for ultra-sensitive detection of HER2 protein

Human epidermal growth factor receptor 2 (HER2) status is an important factor in evaluating the prognosis of breast cancer patients. Therefore, it is particularly important to develop a simple and sensitive method for the detection of HER2-positive breast cancer. Here, an ultra-sensitive electrochemical biosensor for detecting HER2-specific proteins was assembled using gold nanoparticles and Two-dimensional carbides (AuNPs-Ti3C2Tx) as a conducting substrate. The prepared AuNPs-Ti3C2Tx not only has good electrical conductivity and strong electrochemical signal output, but also provides a large number of active sites for the AuS bonds assembly aptamer. In addition, the antibodies-modified functionalized graphene oxide (GO) as a carrier platform, which provides an additional boost for the detection of trace targets with high sensitivity under optimal conditions. Afterwards,HER2 protein was detected by signal amplification effect of AuNPs-Ti3C2Tx and functionalized GO combined with Electron transfer activated regeneration catalyst atomic transfer radical polymerization (ARGET ATRP). In the range of 1 to 105 ng·mL-1, there was a good linear relationship between the HER2 concentration and the signal intensity, with a limit of detection of 0.19 pg·mL-1. Moreover, this method has good selectivity and stability, and then still maintains good detection performance and strong anti-interference ability in the complex environment of normal human serum, which is expected to be applied in clinical application.

Nanobodies' duo facilitates ultrasensitive serum HER-2/neu immunoassays via enhanced avidity interactions

BACKGROUND

Existing liquid biopsy assays for protein biomarkers of cancer are mostly based on antibodies (Ab) contributing unfavorably to their high cost. Easy to express and modify in vitro, nanobodies may be a cost-effective alternative to Ab.

RESULTS

We show that serum HER-2/neu, a biomarker and target of aggressive HER-2/neu(+) cancers, can be accurately detected in a 1.2 h electrochemical cellulase-linked sandwich nanobody/aptamer assay on magnetic beads. Using a single nanobody receptor, 2Rs15d or 2Rb17c, reduces immunoassay's sensitivity by 35%-26 %. A combination of two nanobodies as a duo-receptor recovers the sensitivity of the enzyme-linked nanobody/aptamer-sorbent assay (ELNASA) to 11.9 ± 2.8 μC fM-1, due to the avidity effects making the nanobodies-duo binding properties comparable to those of Ab. Down to 0.1 fM HER-2/neu was detected by ELNASA in serum samples, with no interference from other blood-circulating proteins. In a 30 healthy-volunteers trial, ELNASA more accurately than optical ELISA assayed serum HER-2/neu.

SIGNIFICANCE

ELNASA performance rivals that of ELISA, yet estimated to be at least 200 times cheaper, due to the lower cost of nanobodies production, and may be better suited for routine clinical analysis of HER-2/neu, particularly, in low- and middle-income settings with limited resources. The ELNASA approach is generic and may be adapted for specific and ultrasensitive analysis of other blood-circulating proteins.

A new insight into the early detection of HER2 protein in breast cancer patients with a focus on electrochemical biosensors approaches: A review

Breast cancer is one of the leading causes of death in women and is a prevalent kind of cancerous growth, representing a substantial risk to women's health. Early detection of breast cancer is essential for effective treatment and improved survival rates. Biomarkers, active substances that signal the existence and advancement of a tumor, play a significant role in the early detection of breast cancer. Hence, accurate identification of biomarkers for tumors is crucial for diagnosing and treating breast cancer. However, the primary diagnostic methods used for the detection of breast cancer require specific equipment, skilled professionals, and specialized analysis, leading to elevated detection expenses. Regarding this obstacle, recent studies emphasize electrochemical biosensors as more advanced and sensitive detection tools compared to traditional methods. Electrochemical biosensors are employed to identify biomarkers that act as unique indicators for the onset, recurrence, and monitoring of therapeutic interventions for breast cancer. This study aims to provide a summary of the electrochemical biosensors that have been employed for the detection of breast cancer at an early stage over the past decade. Initially, the text provides concise information about breast cancer and tumor biomarkers. Subsequently, an in-depth analysis is conducted to systematically review the progress of electrochemical biosensors developed for the stable, specific, and sensitive identification of biomarkers associated with breast cancer. Particular emphasis was given to crucial clinical biomarkers, specifically the human epidermal growth factor receptor-2 (HER2). The analysis then explores the limitations and challenges inherent in the design of effective biosensors for diagnosing and treating breast cancer. Ultimately, we provided an overview of future research directions and concluded by outlining the advantages of electrochemical biosensor approaches.

An ultrasensitive ratiometric electrochemical aptasensor based on metal-organic frameworks and nanoflower-like Bi2CuO4 for human epidermal growth factor receptor 2 detection

An ultra-sensitive ratiometric electrochemical aptasensor was constructed based on metal-organic frameworks (MOFs) and bimetallic oxides for the detection of the human epidermal growth factor receptor 2 (HER2), a breast cancer marker. The aluminum metal-organic framework (Al-MOF) and cerium-metal-organic framework (Ce-MOF) have higher specific surface area, which is conducive to load more aptamers or complementary DNA (cDNA), and realize the amplification of internal reference signal Fc. Furthermore, nanoflower-like bismuth copper oxide (Bi2CuO4) with abundant active sites was introduced to modify more aptamers on its surface, which were then fixed to the glassy carbon electrode (GCE) to amplify the detection signal. The quantitative detection of HER2 was achieved by differential pulse voltammetry (DPV), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The materials were characterized by scanning electron microscope, transmission electron microscope, Zeta potential analyzer, X-ray diffraction and X-ray photoelectron spectroscopy. The ratiometric electrochemical aptasensor based on nanomaterial and chain displacement signal amplification technology could discern HER2 in a very wide range (0.001-20.0 ng/mL) with an extremely low detection limit (0.049 pg/mL) and has demonstrated good performance in clinical serum analysis. This strategy also provides a feasible idea for sensitive analysis of other clinical tumor markers.

Electrochemical Cellulase-Linked ELASA for Rapid Liquid Biopsy Testing of Serum HER-2/neu

Non-invasive liquid biopsy assays for blood-circulating biomarkers of cancer allow both its early diagnosis and treatment monitoring. Here, we assessed serum levels of protein HER-2/neu, overexpressed in a number of aggressive cancers, by the cellulase-linked sandwich bioassay on magnetic beads. Instead of traditional antibodies we used inexpensive reporter and capture aptamer sequences, transforming the enzyme-linked immuno-sorbent assay (ELISA) into an enzyme-linked aptamer-sorbent assay (ELASA). The reporter aptamer was conjugated to cellulase, whose digestion of nitrocellulose film electrodes resulted in the electrochemical signal change. ELASA, optimized relative aptamer lengths (dimer vs monomer and trimer), and assay steps allowed 0.1 fM detection of HER-2/neu in the 10% human serum in 1.3 h. Urokinase plasminogen activator and thrombin as well as human serum albumin did not interfere, and liquid biopsy analysis of serum HER-2/neu was similarly robust but 4 times faster and 300 times cheaper than both electrochemical and optical ELISA. Simplicity and low cost of cellulase-linked ELASA makes it a perspective diagnostic tool for fast and accurate liquid biopsy detection of HER-2/neu and of other proteins for which aptamers are available.

Electrochemical aptasensor based on the engineered core-shell MOF nanostructures for the detection of tumor antigens

It is essential to develop ultrasensitive biosensors for cancer detection and treatment monitoring. In the development of sensing platforms, metal-organic frameworks (MOFs) have received considerable attention as potential porous crystalline nanostructures. Core-shell MOF nanoparticles (NPs) have shown different diversities, complexities, and biological functionalities, as well as significant electrochemical (EC) properties and potential bio-affinity to aptamers. As a result, the developed core-shell MOF-based aptasensors serve as highly sensitive platforms for sensing cancer biomarkers with an extremely low limit of detection (LOD). This paper aimed to provide an overview of different strategies for improving selectivity, sensitivity, and signal strength of MOF nanostructures. Then, aptamers and aptamers-modified core-shell MOFs were reviewed to address their functionalization and application in biosensing platforms. Additionally, the application of core-shell MOF-assisted EC aptasensors for detection of several tumor antigens such as prostate-specific antigen (PSA), carbohydrate antigen 15-3 (CA15-3), carcinoembryonic antigen (CEA), human epidermal growth factor receptor-2 (HER2), cancer antigen 125 (CA-125), cytokeratin 19 fragment (CYFRA21-1), and other tumor markers were discussed. In conclusion, the present article reviews the advancement of potential biosensing platforms toward the detection of specific cancer biomarkers through the development of core-shell MOFs-based EC aptasensors.

Electrochemical and Photoelectrochemical Immunosensors for the Detection of Ovarian Cancer Biomarkers

Photoelectrochemical (PEC) sensing is an emerging technological innovation for monitoring small substances/molecules in biological or non-biological systems. In particular, there has been a surge of interest in developing PEC devices for determining molecules of clinical significance. This is especially the case for molecules that are markers for serious and deadly medical conditions. The increased interest in PEC sensors to monitor such biomarkers can be attributed to the many apparent advantages of the PEC system, including an enhanced measurable signal, high potential for miniaturization, rapid testing, and low cost, amongst others. The growing number of published research reports on the subject calls for a comprehensive review of the various findings. This article is a review of studies on electrochemical (EC) and PEC sensors for ovarian cancer biomarkers in the last seven years (2016-2022). EC sensors were included because PEC is an improved EC; and a comparison of both systems has, expectedly, been carried out in many studies. Specific attention was given to the different markers of ovarian cancer and the EC/PEC sensing platforms developed for their detection/quantification. Relevant articles were sourced from the following databases: Scopus, PubMed Central, Web of Science, Science Direct, Academic Search Complete, EBSCO, CORE, Directory of open Access Journals (DOAJ), Public Library of Science (PLOS), BioMed Central (BMC), Semantic Scholar, Research Gate, SciELO, Wiley Online Library, Elsevier and SpringerLink.

Label-Free Electrochemical Biosensor Platforms for Cancer Diagnosis: Recent Achievements and Challenges

With its fatal effects, cancer is still one of the most important diseases of today's world. The underlying fact behind this scenario is most probably due to its late diagnosis. That is why the necessity for the detection of different cancer types is obvious. Cancer studies including cancer diagnosis and therapy have been one of the most laborious tasks. Since its early detection significantly affects the following therapy steps, cancer diagnosis is very important. Despite researchers' best efforts, the accurate and rapid diagnosis of cancer is still challenging and difficult to investigate. It is known that electrochemical techniques have been successfully adapted into the cancer diagnosis field. Electrochemical sensor platforms that are brought together with the excellent selectivity of biosensing elements, such as nucleic acids, aptamers or antibodies, have put forth very successful outputs. One of the remarkable achievements of these biomolecule-attached sensors is their lack of need for additional labeling steps, which bring extra burdens such as interference effects or demanding modification protocols. In this review, we aim to outline label-free cancer diagnosis platforms that use electrochemical methods to acquire signals. The classification of the sensing platforms is generally presented according to their recognition element, and the most recent achievements by using these attractive sensing substrates are described in detail. In addition, the current challenges are discussed.

Design and Application of Electrochemical Sensors with Metal-Organic Frameworks as the Electrode Materials or Signal Tags

Metal-organic frameworks (MOFs) with fascinating chemical and physical properties have attracted immense interest from researchers regarding the construction of electrochemical sensors. In this work, we review the most recent advancements of MOF-based electrochemical sensors for the detection of electroactive small molecules and biological macromolecules (e.g., DNA, proteins, and enzymes). The types and functions of MOF-based nanomaterials in terms of the design of electrochemical sensors are also discussed. Furthermore, the limitations and challenges of MOF-based electrochemical sensing devices are explored. This work should be invaluable for the development of MOF-based advanced sensing platforms.

Point-of-care electrochemical testing of biomarkers involved in inflammatory and inflammatory-associated medical conditions

Recent years have shown that the diagnosis and monitoring of biomarkers involved in inflammatory-associated medical conditions such as cancer, neurological disorders, viral infections, or daily physical activities offer real benefits in increasing the quality of medical care and patient life quality. In this context, the use of integrated and portable platforms as point-of-care testing devices for biomedical analysis to enable early disease diagnosis and monitoring, which can be successfully used even at the patient's bed, is an emergency nowadays. The development of low-cost, miniaturized, and portable, user-friendly devices that provide an answer in a timely manner, such as electrochemical sensors, is relevant for the elaboration of point-of-care testing devices. This review focuses on the recent progress in bioanalysis of both specific biomarkers and inflammatory-associated biomarkers present in several diseases like neoplasia, severe neurological disorders, viral infections, and usual physical activity and provides an overview of the state of the art over the most recent electrochemical (bio)sensors for the detection of inflammation-related biomarkers. Future perspectives of point-of-care testing to improve healthcare management are also discussed.

Simultaneous determination of BoNT/A and /E using an electrochemical sandwich immunoassay based on the nanomagnetic immunosensing platform

Developing new ultrasensitive assays for the detection of the presence, and determination of the serotype of the most poisonous material known i.e. botulinum neurotoxin (BoNT) is vital to human health and the wellbeing of the surrounding environment. Here, an electrochemical sandwich immunoassay with high sensitivity is adopted to achieve simultaneous determination of BoNT serotypes A and E based on polystyrene@polydopamine/Cd²⁺ and Ag nanoparticles acting as monoclonal antibody labels. Two well-separated peaks with strong electrochemical signals are generated by the labels, allowing for the simultaneous detection of two analytes existing on the electrode. To obtain well-oriented polyclonal antibodies immobilization, boronic acid is directly attached to the magnetic core/metal-organic framework (MOF) shell nanoagent surfaces without the requirement of a long and flexible spacer. Accordingly, it is possible to directly detect the metal ion labels through square wave voltammetry without the metal pre-concentration step. This results in distinct and well-defined voltammetric peaks, pertaining to each sandwich-type immunocomplexes. The limits of detection of BoNT/A and BoNT/E analyses were found to be 0.04 and 0.16 pg mL^-1 with the linear dynamic ranges of 0.1-1000 and 0.5-1000 pg mL^-1, respectively. Based on the obtained results, this immunosensor has the wide linear ranges, while also exhibiting low limits of detection along with good stability and reproducibility.

A Sandwich-Type Electrochemical Immunosensor Using Antibody-Conjugated Pt-Doped CdTe QDs as Enzyme-Free Labels for Sensitive HER2 Detection Based on a Magnetic Framework

Tumor markers are highly sensitive and play an important role in the early diagnosis of cancer. We developed an electrochemical sandwich-type immunosensor that detects human epidermal growth factor receptor 2 (HER2). Magnetic framework (Fe₃O₄@ TMU-24) and AuNPs (Fe₃O₄@ TMU-24 -AuNPs) are utilized in this sensing platform. In addition to their high specific surface area and excellent biocompatibility, Fe₃O₄@ TMU-24-AuNPs nanocomposites exhibited excellent electrocatalytic properties. The primary antibody of HER2 (Ab₁) was immobilized on the surface of the Fe₃O₄@ TMU-24-AuNPs. In this sensing method, palatine doped to CdTe QDs (Pt: CdTe QDs) is utilized as a novel labeling signal biomolecule (secondary antibodies). Pt: CdTe QDs own good biocompatibility and excellent catalytic performance. The amperometric technique was used to achieve the quantitative determination of HER2 by using a sandwich-type electrochemical immunosensor. Under the optimum conditions, the dependency of the current signal and HER2 concentration showed a linear region from 1 pg ml⁻¹–100 ng ml⁻¹ with 0.175 pg ml⁻¹ as the limit of detection. This biosensing device also showed long stability and good reproducibility, which can be used for the quantitative assay of HER2.

A high-performance electrochemical aptasensor based on graphene-decorated rhodium nanoparticles to detect HER2-ECD oncomarker in liquid biopsy

Evaluation of extracellular domain of human epidermal growth factor receptor-2 (HER2-ECD) oncomarker status is an impressive factor in screening, diagnosing and monitoring early-stage breast cancer (BC). Electrochemical aptamer-based nanobiosensor with high sensitivity and selectivity for quantitative and qualitative measurement of HER2-ECD oncomarker was developed. In this study, the nanocomposite made by distinct materials included reduced graphene oxide nano-sheets (rGONs) and rhodium nanoparticles (Rh-NPs) on the graphite electrode (GE) surface. This structure resulted in amplified electrochemical activity, high surface area, stability, and bio-compatibility. Each of the steps of preparing nanomaterials and setting up biosensor were carefully examined by analytical and electrochemical techniques. Various modified electrodes were constructed and analyzed in terms of electrochemical performance, morphology, size, and shape of nanomaterials. The GE-based aptasensor had a noteworthy and conducive results against HER2-ECD with a wide dynamic range of 10.0-500.0 ng/mL, a low limit of detection (LOD) of 0.667 ng/mL (significantly less than the clinical cut-off), and a low limit of quantification (LOQ) of 2.01 ng/mL. The benefits provided by this aptasensor such as broad dynamic range, high sensitivity, selectivity, stability, reproducibility, and low cost suggest tremendous potential for non-invasive detection and monitoring of the HER2-ECD levels of BC care and clinical diagnosis.

Nanotechnology-based approaches for effective detection of tumor markers: A comprehensive state-of-the-art review

As well-appreciated biomarkers, tumor markers have been spotlighted as reliable tools for predicting the behavior of different tumors and helping clinicians ascertain the type of molecular mechanism of tumorigenesis. The sensitivity and specificity of these markers have made them an object of even broader interest for sensitive detection and staging of various cancers. Enzyme-linked immunosorbent assay (ELISA), fluorescence-based, mass-based, and electrochemical-based detections are current techniques for sensing tumor markers. Although some of these techniques provide good selectivity, certain obstacles, including a low sample concentration or difficulty carrying out the measurement, limit their application. With the advent of nanotechnology, many studies have been carried out to synthesize and employ nanomaterials (NMs) in sensing techniques to determine these tumor markers at low concentrations. The fabrication, sensitivity, design, and multiplexing of sensing techniques have been uplifted due to the attractive features of NMs. Various NMs, such as magnetic and metal nanoparticles, up-conversion NPs, carbon nanotubes (CNTs), carbon-based NMs, quantum dots (QDs), and graphene-based nanosensors, hyperbranched polymers, optical nanosensors, piezoelectric biosensors, paper-based biosensors, microfluidic-based lab-on-chip sensors, and hybrid NMs have proven effective in detecting tumor markers with great sensitivity and selectivity. This review summarizes various categories of NMs for detecting these valuable markers, such as prostate-specific antigen (PSA), human carcinoembryonic antigen (CEA), alpha-fetoprotein (AFP), human chorionic gonadotropin (hCG), human epidermal growth factor receptor-2 (HER2), cancer antigen 125 (CA125), cancer antigen 15-3 (CA15-3, MUC1), and cancer antigen 19-9 (CA19-9), and highlights recent nanotechnology-based advancements in detection of these prognostic biomarkers.

Recent Progress in Electrochemical Immunosensors

Biosensors used for medical diagnosis work by analyzing physiological fluids. Antibodies have been frequently used as molecular recognition molecules for the specific binding of target analytes from complex biological solutions. Electrochemistry has been introduced for the measurement of quantitative signals from transducer-bound analytes for many reasons, including good sensitivity. Recently, numerous electrochemical immunosensors have been developed and various strategies have been proposed to detect biomarkers. In this paper, the recent progress in electrochemical immunosensors is reviewed. In particular, we focused on the immobilization methods using antibodies for voltammetric, amperometric, impedimetric, and electrochemiluminescent immunosensors.

Recent advances in nanomaterials-based electrochemical immunosensors and aptasensors for HER2 assessment in breast cancer

Human epidermal growth factor receptor 2 (HER2) is one of the key molecular targets in breast cancer pathogenesis. Overexpression and/or amplification of HER2 in approximately 15-20% of breast cancer patients is associated with high mortality and poor prognosis. Accumulating evidence shows that accurate and sensitive detection of HER2 improves the survival outcomes for HER2-positive breast cancer patients from targeted therapies. The current methods of clinical determination of HER2 expression levels are based on slide-based assays that rely on invasively collected primary tumours. Alternatively, ELISA-based detection of the shredded HER2 extracellular domain (HER2-ECD) of has been suggested as a surrogate method for monitoring disease progress and treatment response in breast cancer patients. In the past decade, biosensors have emerged as an alternative modality for the detection of circulating HER2-ECD in human serum samples. In particular, electrochemical biosensors based on nanomaterials and antibodies and aptamers have been increasingly developed as promising tools for rapid, sensitive, and cost-effective detection of HER2-ECD. These biosensors harness the high affinity and specificity of antibodies and aptamers, and unique conductive properties, biocompatibility, large surface area, and chemical stability of nanomaterials for selective and sensitive assessment of the HER2. This review provides an overview of the recent advances in the application of nanomaterials-based immunosensors and aptasensors for detection of circulating HER2-ECD. In particular, various electrochemical techniques, detection approaches, and nanomaterials are discussed. Further, analytical figures of merit of various HER2 immunosensors and aptasensors are compared. Finally, possible challenges and potential opportunities for biosensor-based detection of HER2-ECD are discussed.

Signal amplification of novel sandwich-type genosensor via catalytic redox-recycling on platform MWCNTs/Fe3O4@TMU-21 for BRCA1 gene detection

The MWCNTs/Fe₃O₄@TMU-21 as a novel electrochemical sandwich-type genosensor was fabricated to detect the BRCA1 gene using the redox-cycling ferrocene functionalized reporter label probe (r-Fc-DNA). In the designed genosensor, the capture probe (cDNA) and r-Fc-DNA were used to detect the BRCA1 gene in sandwich-type genosensor, in which DNA sequences are well -hybridized with the BRCA1 gene (t-DNA). The cDNA was immobilized on the multiwall carbon nanotube and metal-organic framework with Fe₃O₄ nanoparticle core, which is the sensor platform. Target DNA was assayed by redox-recycling reporter probe (r-Fc-DNA) using the electro-catalytic activity of ferri/ferrocyanide, which results in significantly enhanced the oxidation peak current of r-Fc-DNA. The electrochemical redox cycling led to a high signal-to-noise ratio for gene assay. MWCNTs and Fe₃O₄@TMU-21 were applied to increase the platform conductivity and suitable binding of the recognition elements. This constructed genosensor plays an influential role in increasing the sensitivity of BRCA1 gene sequence recognition. So that under optimal conditions, this genosensor illustrated a wide linear range from 1.0×10^-15 to 1.0×10^-10 M with a detection limit of 0.57 × 10^-15 M. Moreover, the genosensor exhibited high selectivity, stability, and reproducibility. The obtained recoveries (between 91 and 105%) of the BRCA1 gene assay in human blood samples satisfactory, which can be used for BRCA1 gene measurement in the laboratory.

Aptamer-based sensing of breast cancer biomarkers: a comprehensive review of analytical figures of merit

INTRODUCTION

Accurate determination of the aberrantly expressed biomarkers such as human epidermal growth factor receptor 2 (HER2), carcinoembryonic antigen (CEA), platelet-derived growth factor (PDGF), mucin 1 (MUC1), and vascular endothelial growth factor VEGF₁₆₅ have played an essential role in the clinical management of the breast cancer. Assessment of these cancer-specific biomarkers has conventionally relied on time-taking methods like the enzyme-linked immunosorbent assay and immunohistochemistry. However, recent development in the aptamer-based diagnostics has allowed developing tools that may substitute the conventional means of biomarker assessment in breast cancer. Adopting the aptamer-based diagnostic tools (aptasensors) to clinical practices will depend on their analytical performance on clinical samples.

AREAS COVERED

In this review, we provide an overview of the analytical merits of HER2, CEA, PDGF, MUC1, and VEGF₁₆₅ aptasensors. Scopus and Pubmed databases were searched for studies reporting aptasensor development for the listed breast cancer biomarkers in the past one decade. Linearity, detection limit, and response time are emphasized.

EXPERT OPINION

In our opinion, aptasensors have proven to be on a par with the antibody-based methods for detection of various breast cancer biomarkers. Though robust validation of the aptasensors on significant sample size is required, their ability to detect pathophysiological range of biomarkers suggest the possibility of future clinical adoption.

Multimodal/Multifunctional Nanomaterials in (Bio)electrochemistry: Now and in the Coming Decade

Multifunctional nanomaterials, defined as those able to achieve a combined effect or more than one function through their multiple functionalization or combination with other materials, are gaining increasing attention in the last years in many relevant fields, including cargo targeted delivery, tissue engineering, in vitro and/or in vivo diseases imaging and therapy, as well as in the development of electrochemical (bio)sensors and (bio)sensing strategies with improved performance. This review article aims to provide an updated overview of the important advances and future opportunities exhibited by electrochemical biosensing in connection to multifunctional nanomaterials. Accordingly, representative aspects of recent approaches involving metal, carbon, and silica-based multifunctional nanomaterials are selected and critically discussed, as they are the most widely used multifunctional nanomaterials imparting unique capabilities in (bio)electroanalysis. A brief overview of the main remaining challenges and future perspectives in the field is also provided.