The influence of myosin heavy chain isoform content on mechanical behavior of the vastus lateralis in vivo

Influence of Pennation Angle and Muscle Thickness on Mechanomyographic Amplitude-Torque Relationships and Sex-Related Differences in the Vastus Lateralis

This study examined potential sex-related differences and correlations among the pennation angle (PA), muscle thickness (MT), and mechanomyographic amplitude (MMG_RMS)-torque relationships of the vastus lateralis (VL) in 11 healthy males and 12 healthy females. The PA and MT of the VL were quantified with ultrasound. Participants performed an isometric muscle action of the knee extensors that linearly increased to 70% of maximal strength followed by a 12 s plateau. MMG was recorded from the VL. Linear regression models were fit to the log-transformed MMG_RMS-torque relationships to calculate b terms (slopes) for the linearly increasing segment. MMG_RMS was averaged during the plateau. Males exhibited greater PA (p < 0.001), MT (p = 0.027), b terms (p = 0.005), and MMG_RMS (p = 0.016). The b terms were strongly (p < 0.001, r = 0.772) and moderately correlated (p = 0.004, r = 0.571) with PA and MT, respectively, while MMG_RMS was moderately correlated with PA (p = 0.018, r = 0.500) and MT (p = 0.014, r = 0.515). The greater mechanical behavior of individuals possessing a larger PA and MT of the VL may reflect increased cross-bridge activity within the muscle fibers. Additionally, PA may help explain sex-related differences in MMG_RMS between sexes.

A noninvasive test for estimating myosin heavy chain of the vastus lateralis in females with mechanomyography

This study examined relationships between percent myosin heavy chain (%MHC) expression and mechanomyographic amplitude (MMG_RMS). Fifteen females (age ± SD=21.3 ± 5.3 yrs) completed isometric trapezoidal contractions at 30% and 70% maximal voluntary contraction (MVC). MMG was recorded from the vastus lateralis (VL). Participants gave a muscle biopsy of the VL post-testing. MMG_RMS-torque relationships during the linearly varying segments were log-transformed and linear regressions were applied to calculate b terms (slopes). For the steady torque segment, MMG_RMS was averaged. Correlations were performed for type I%MHC with the MMG variables. Multiple regression was utilized to examine prediction equations for type I%MHC. Type I%MHC was significantly correlated with the b terms during the increasing segment of the 70% MVC (p = 0.003; r = -0.718), and MMG_RMS during steady torque at 30% (p = 0.008; r = -0.652) and 70% MVC (p = 0.040; r = -0.535). Type I%MHC reduced the linearity of the MMG_RMS-torque relationship during the high-intensity linearly increasing segment, and MMG_RMS at a low- and high-intensity steady torque. A combination of MMG variables estimated type I%MHC expression with 81.2% accuracy. MMG recorded during a low- and high-intensity isometric trapezoidal contraction may offer a simple, noninvasive test for estimating type I%MHC expression of the VL in sedentary females.

Effects of Endurance Cycling on Mechanomyographic Median Power Frequency of the Vastus Lateralis

This study examined the effects of cycling training on mechanomyographic median power frequency (MMGMDF)–torque relationships of the vastus lateralis (VL). Ten males (Age ± SD; 20.20 ± 1.87 years) and 14 females (21.93 ± 5.33 years) performed isometric trapezoidal muscle actions with the knee extensors at 40% maximal voluntary contraction (MVC) before (PRE) and following 10 weeks of cycling training at the same absolute submaximal torque as pre-training (POSTABS). MMGMDF–torque relationships (increasing and decreasing segment) were log-transformed and b terms (slopes) were calculated. MMGMDF was averaged during steady torque. For POSTABS, the b terms for the females (0.133 ± 0.190) were greater than for the males (−0.083 ± 0.200; p = 0.013) and compared to PRE (0.008 ± 0.161; p = 0.036). At PRE, the b terms for the linearly increasing-muscle action (0.123 ± 0.192) were greater compared to the linearly decreasing-muscle action (−0.061 ± 0.188; p < 0.001), whereas no differences existed between muscle actions for POSTABS (p > 0.05). In conclusion, 10 weeks of cycling training resulted in different motor unit (MU) control strategies between sexes and altered MU control strategies between muscle actions for the VL during a moderate-intensity contraction.

A Coupled Piezoelectric Sensor for MMG-Based Human-Machine Interfaces

Mechanomyography (MMG) is a technique of recording muscles activity that may be considered a suitable choice for human–machine interfaces (HMI). The design of sensors used for MMG and their spatial distribution are among the deciding factors behind their successful implementation to HMI. We present a new design of a MMG sensor, which consists of two coupled piezoelectric discs in a single housing. The sensor’s functionality was verified in two experimental setups related to typical MMG applications: an estimation of the force/MMG relationship under static conditions and a neural network-based gesture classification. The results showed exponential relationships between acquired MMG and exerted force (for up to 60% of the maximal voluntary contraction) alongside good classification accuracy (94.3%) of eight hand motions based on MMG from a single-site acquisition at the forearm. The simplification of the MMG-based HMI interface in terms of spatial arrangement is rendered possible with the designed sensor.

Endurance training alters motor unit activation strategies for the vastus lateralis, yet sex-related differences and relationships with muscle size remain

PURPOSE

To examine the effects of 10 weeks of endurance cycling training on mechanomyographic amplitude (MMG_RMS)-torque relationships and muscle cross-sectional area (mCSA) of the vastus lateralis (VL) for 10 sedentary males (Age ± SD; 20.2 ± 1.9 years) and 14 sedentary females (21.9 ± 5.3 years).

METHODS

Participants performed maximal voluntary contractions (MVCs) and an isometric ramp up muscle action to 70% MVC of the knee extensors before (PRE) and after training at the same absolute pre-treatment submaximal torque (POST_ABS). MMG was recorded from the VL and b terms were calculated from the natural log-transformed MMG_RMS-torque relationships for each subject. mCSA was determined with ultrasonography.

RESULTS

Cycling decreased MVCs from pre- (168.10 ± 58.49 Nm) to post-training (160.78 ± 58.39 Nm; p = 0.005) without changes in mCSA. The b terms were greater for POST_ABS (0.623 ± 0.204) than PRE (0.540 ± 0.226; p = 0.012) and for males (0.717 ± 0.171) than females (0.484 ± 0.168; p = 0.003). mCSA was correlated with the b terms for PRE (p < 0.001, r = 0.674) and POST_ABS (p = 0.020, r = 0.471).

CONCLUSION

The decrease in MVC and increase in MMG_RMS (b terms) post-training suggests increased motor unit (MU) recruitment to match pre-training torques. The greater acceleration in the b terms by males may reflect sex-related differences in fiber-type area. MMG_RMS-torque relationships during a high-intensity contraction provided insight on MU activation strategies following endurance training and between sexes. Furthermore, the findings suggest a relationship between MMG_RMS and muscle size.

Sex- and fiber-type-related contractile properties in human single muscle fiber

This study aimed to examine the distribution and contractile properties of single muscle fiber sex/myosin heavy chain (MHC) type-related differences and to evaluate the correlation of cross-sectional area (CSA) and specific force (SF) in a single muscle fiber. Six young men and six young women were participated in this study. Muscle sample was obtained from vastus lateralis muscle. To examine potential gender differences within each fiber contractile properties (CSA, maximal isometric force, SF, maximal shortening velocity) and relationship between CSA and SF of single fiber using Pearson correlation. After mechanical measurements, single muscle fiber determined MHC isoforms using silver stain. MHC isoform composition did not differ by sex (chi-square=6.978, P=0.073). There were sex-related differences in CSA and maximal isometric force (P<0.05), but no fiber type-related differences (P>0.05). Related to SF and maximal shortening velocity, there were no sex-related differences only fiber type-related differences (P<0.05). However, there were differences in SF between single fiber types in men but not in women. A negative correlation was found between CSA and SF in both men and women (P<0.05). It is suggested that there might be different mechanical properties of cross-bridges according to sex.

The influence of input excitation on the inter- and intra-day reliability of the motor unit firing rate versus recruitment threshold relationship

Decomposition of the surface electromyographic (sEMG) signal is commonly used to examine motor unit (MU) firing behavior. However, the intra- and inter-day reliability of these measurements has yet to be quantified or reported. This investigation 1) examined the effect of input excitation on the mean firing rate (MFR) vs. recruitment threshold (RT) relationship and 2) determined the inter- and intra-day reliability of the MFR vs. RT relationship at 30%, 50%, and 70% of maximum voluntary isometric strength (MVIC). Twenty-eight healthy males (23 ± 3 yr) completed two experimental visits, during which they performed MVIC testing and isometric ramp contractions at 30%, 50%, and 70% MVIC. sEMG signals were recorded from the vastus lateralis during the ramp contractions and decomposed to establish the MFR vs. RT relationship for the detected MUs. Intra- and inter-day reliability was then established for the slopes and y-intercepts of the MFR vs. RT relationship at each contraction intensity. All participants displayed significant MFR vs. RT relationships ( r range: -0.662 to -0.999; P ≤ 0.001-0.006). Intra- and inter-day intraclass correlation coefficients (ICCs) ranged from 0.766-0.824 and 0.867-0.919 for the slopes and from 0.780-0.915 and 0.804-0.927 for the y-intercepts, respectively. Furthermore, the slope coefficient was significantly greater at 70% than at 30% MVIC, and the y-intercepts increased with increasing contraction intensities. Changes in input excitation to the MU pool alter the magnitude, but not the reliability, of the slopes and y-intercepts of the MFR vs. RT relationship. NEW & NOTEWORTHY The firing behavior of the motor unit (MU) pool is often characterized using the mean firing rate vs. recruitment threshold relationship of the active MUs. Although this relationship has been widely used, this is the first study to report the effects of input excitation (contraction intensity) on the intra- and inter-day reliability of this relationship. The criteria used for MU analysis and the model utilized in this study allow for generalization to outside investigators and laboratories.

Differences in the motor unit firing rates and amplitudes in relation to recruitment thresholds during submaximal contractions of the first dorsal interosseous between chronically resistance-trained and physically active men

Previous investigations report no changes in motor unit (MU) firing rates during submaximal contractions following resistance training. These investigations did not account for MU recruitment or examine firing rates as a function of recruitment threshold (REC). Therefore, MU recruitment and firing rates in chronically resistance-trained (RT) and physically active controls (CON) were examined. Surface electromyography signals were collected from the first dorsal interosseous during isometric muscle actions at 40% and 70% maximal voluntary contraction (MVC). For each MU, force at REC, mean firing rate (MFR) during the steady force, and MU action potential amplitude (MUAP_AMP) were analyzed. For each individual and contraction, the MFRs were linearly regressed against REC, whereas, exponential models were applied to the MFR versus MUAP_AMP and MUAP_AMP versus REC relationships with the y-intercepts and slopes (linear) and A and B terms (exponential) calculated. For the 40% MVC, the RT had less negative slopes (p = 0.001) and lower y-intercepts (p = 0.006) of the MFR versus REC relationships and lower B terms (p = 0.011) of the MUAP_AMP versus REC relationships. There were no differences in either relationship between groups for the 70% MVC. During the 40% MVC, the RT had a smaller range of MFRs and MUAP_AMPS in comparison with the CON, likely because of reduced MU recruitment. The RT had lower MFRs and recruitment during the 40% MVC, which may indicate a leftward shift in the force-frequency relationship, and thus require less excitation to the motoneuron pool to match the same relative force.

Mechanomyographic responses for the biceps brachii are associated with failure times during isometric force tasks

In order to characterize the physiological adjustments within the neuromuscular system that contribute to task failure, this study examined the surface mechanomyographic (MMG) response during maximal and submaximal isometric force tasks of the elbow flexors sustained to failure. The time and frequency components of the MMG signal have shown to be influenced by motor unit activation patterns as well as tetanus. Therefore, it was hypothesized that the rate of change for the MMG response would associate with failure times and would be reduced to a similar degree between the two tasks. The isometric force tasks were performed by the dominant elbow flexors of twenty healthy males (age: 25 ± 4 years) and MMG was collected from the biceps brachii. Regression analyses were used to model the relationships between the rates of change for MMG versus failure times. There were high levels of interindividual variability in the response patterns, yet the models demonstrated significant negative associations between the rate of change for the MMG responses and failure times during both tasks (R2  = 0.41-0.72, P < 0.05). Similarly, the mean MMG amplitude and frequency values were reduced to comparable levels at the failure point of the two tasks. The results of this study demonstrated that force failure is associated with the rate of diminution in the properties of the muscle force twitch.