The influence of the precursor and synthesis method on the CO2 capture capacity of carpet waste-based sorbents

Natural Products Derived Porous Carbons for CO2 Capture

As it is now established that global warming and climate change are a reality, international investments are pouring in and rightfully so for climate change mitigation. Carbon capture and separation (CCS) is therefore gaining paramount importance as it is considered one of the powerful solutions for global warming. Sorption on porous materials is a promising alternative to traditional carbon dioxide (CO2 ) capture technologies. Owing to their sustainable availability, economic viability, and important recyclability, natural products-derived porous carbons have emerged as favorable and competitive materials for CO2 sorption. Furthermore, the fabrication of high-quality value-added functional porous carbon-based materials using renewable precursors and waste materials is an environmentally friendly approach. This review provides crucial insights and analyses to enhance the understanding of the application of porous carbons in CO2 capture. Various methods for the synthesis of porous carbon, their structural characterization, and parameters that influence their sorption properties are discussed. The review also delves into the utilization of molecular dynamics (MD), Monte Carlo (MC), density functional theory (DFT), and machine learning techniques for simulating adsorption and validating experimental results. Lastly, the review provides future outlook and research directions for progressing the use of natural products-derived porous carbons for CO2 capture.

Biomass-Based N-Rich Porous Carbon Materials for CO2 Capture and in-situ Conversion

Capturing CO₂ and subsequently converting into valuable chemicals has attracted extensive attention. Herein, a series of biomass-based N-rich porous carbon materials with high specific surface area and pore volume were prepared using biomass waste soybean dregs as precursors. The nitrogen content was up to 4 % with different forms in the carbon skeleton such as pyridine-N, pyrrole-N. The synergistic effect of ultra-micropore (pore size <0.7 nm) and N-containing groups endowed the materials with a high CO₂ adsorption capacity, reaching 6.3 and 3.6 mmol g^-1 at 0 and 25 °C under atmospheric pressure, respectively. In addition, the sufficient interaction between N-containing groups and CO₂ was demonstrated by solid-state nuclear magnetic resonance spectroscopy, and the captured CO₂ was possibly activated in the form of carbamate, which is conducive to subsequent conversion. Therefore, the supported catalyst with the as-synthetic porous carbon material as the carrier and Zn^II as catalytic sites was prepared and successfully applied for carboxylative cyclization of propargylic amine with CO₂ to afford the 3-benzyl-5-methyleneoxazolidin-2-one. The results showed that CO₂ capture and in-situ conversion work effectively to produce highly value-added chemicals. In this process, the captured CO₂ could be activated and fixed into chemicals in mild conditions. More importantly, the energy consumption in CO₂ desorption and adsorbent regeneration could be avoided. The valorization of both solid waste and CO₂ to valuable chemicals provides an elegant strategy of killing three birds with one stone.

A review on application of activated carbons for carbon dioxide capture: present performance, preparation, and surface modification for further improvement

The atmosphere security and regulation of climate change are being continuously highlighted as a pressing issue. The crisis of climate change owing to the anthropogenic carbon dioxide emission has led many governments at federal and provincial levels to promulgate policies to address this concern. Among them is regulating the carbon dioxide emission from major industrial sources such as power plants, petrochemical industries, cement plants, and other industries that depend on the combustion of fossil fuels for energy to operate. In view of this, various CO2 capture and sequestration technologies have been investigated and presented. From this review, adsorption of CO2 on porous solid materials has been gaining increasing attention due to its cost-effectiveness, ease of application, and comparably low energy demand. Despite the myriad of advanced materials such as zeolites, carbons-based, metal-organic frameworks, mesoporous silicas, and polymers being researched, research on activated carbons (ACs) continue to be in the mainstream. Therefore, this review is endeavored to elucidate the adsorption properties of CO2 on activated carbons derived from different sources. Selective adsorption based on pore size/shape and surface chemistry is investigated. Accordingly, the effect of surface modifications of the ACs with NH3, amines, and metal oxides on adsorption performance toward CO2 is evaluated. The adsorption performance of the activated carbons under humid conditions is also reviewed. Finally, activated carbon-based composite has been surveyed and recommended as a feasible strategy to improve AC adsorption properties toward CO2. The activated carbon surface in the graphical abstract is nitrogen rich modified using ammonia through thermal treatment. The values of CO2 emissions by sources are taken from (Yoro and Daramola 2020).

Preparation and evaluation of nitrogen-tailored hierarchical meso-/micro-porous activated carbon for CO2 adsorption

In this study, nitrogen-tailored hierarchical meso-/micro-porous activated carbons were successfully fabricated from cypress sawdust by H₃PO₄ activation with further nitrogen modification using three kinds of nitrogen source (i.e. nitic acid, urea and melamine). The produced carbons were used as adsorbents for CO₂ capture. The physic-chemical properties of the produced carbons were characterized by N₂ adsorption-desorption, fourier-transform infrared spectroscopy, scanning electron microscopy and X-ray photoelectron spectroscopy. The effects of pore structure and nitrogen content on CO₂ adsorption were investigated. It was found that H₃PO₄ activation would turn cypress sawdust into mesoporous carbon (AC), nitrogen doping could induce the development of microporosity and also increase the basicity of the carbon framework, which favoured for CO₂ adsorption. Among the nitrogen-tailed carbons, HNO₃-treated activated carbon (AC-N) showed the highest V _mic (0.127 cm³/g), the largest CO₂ adsorption capacity (2.8 mmol/g at 273 K, 1 bar) and the best CO₂/N₂ selectivity as compared to urea and melamine treated ones. The adsorption experiments showed that the presence of microporosity and pyrrolic-N on the carbons were responsible for CO₂ adsorption, the oxygen functional groups on AC-N might also contribute to higher CO₂ uptake, and the mesoporous structure could favour for the fast mass transfer of CO₂. The results of CO₂ adsorption heat confirmed the high affinity of the prepared carbons to CO₂. This study provides a strategy to produce hierarchical meso-/micro-porous activated carbons with enriched nitrogen functional groups, which favoured for CO₂ adsorption.

Solid-Waste-Derived Carbon Dioxide-Capturing Materials

Solid sorbents are considered to be promising materials for carbon dioxide capture. In recent years, many studies have focused on the use of solid waste as carbon dioxide sorbents. The use of waste resources as carbon dioxide sorbents not only leads to the development of relatively low-cost materials, but also eliminates waste simultaneously. Different types of waste materials from biomass, industrial waste, household waste, and so forth were used as carbon dioxide sorbents with sufficient carbon dioxide capture capacities. Herein, progress on the development of carbon dioxide sorbents produced from waste materials is reviewed and covers key factors, such as the type of waste, preparation method, further modification method, carbon dioxide sorption performance, and kinetics studies. In addition, a new research direction for further study is proposed. It is hoped that this critical review will not merely sum up the major research directions in this field, but also provide significant suggestions for future work.

Enhanced CO2 capturing over ultra-microporous carbon with nitrogen-active species prepared using one-step carbonization of polybenzoxazine for a sustainable environment

Nitrogen-enriched porous carbon has been a promising material for CO₂ capture in the recent decades. To enhance the performance of CO₂ adsorption, both an N-active site and the textural properties are crucial determinants. Herein, ultra-microporous carbon with N-active species was prepared using two synthesis procedures: 1) one-step carbonization of a polybenzoxazine (PBZ) precursor at 800 °C, and 2) the CO₂ activation process at 900 °C. The activated porous carbon had the higher specific surface area (943 m²/g) and a total pore volume (0.51 cm³/g) compared to un-activated porous carbon (335 m²/g and 0.19 cm³/g, respectively). In addition, the presence of N-active species such as pyridine-N, secondary-N, pyridone-N, and oxide-N in the carbon structures could be clearly observed in the high-resolution XPS spectra. The CO₂ adsorption measurement was performed at 30 and 50 °C under a wide range of pressures (1-7 bar). The maximum amount of CO₂ uptake was ca. 3.59 mmol/g for the activated porous carbon operated at 30 °C and a CO₂ pressure of 7 bar, which was due to the high specific surface area and the large micropore volume. Specifically, carbon with a 3D interconnected pore structure, derived from the sol-gel process of the PBZ precursor, exhibited good structural stability and consequently led to better absorption capability under the high atmospheric pressure of CO₂. The enhanced CO₂ adsorption capability for the as-prepared porous carbon was based on two mechanisms: physisorption as a result of textural properties and chemisorption as a result of the acid-base interaction between the basic N functionality and the acidic CO₂ gas. All results suggested that ultra-microporous carbon with N-active species prepared from polybenzoxazine is a promising adsorbent for CO₂ capture and storage, which can be used at a wide range of pressures and in many applications e.g. flue gas adsorption and natural gas production.

Urea-formaldehyde derived porous carbons for adsorption of CO2

The aim of the research work is to develop high nitrogen content carbon adsorbents with high textural and surface properties using as a precursor urea-formaldehyde resin and as a template mesoporous-zeolite (MCM-41) through a nanocasting technique.

Synthesis of zeolite from multilayer food packing and sugar cane bagasse ash for CO2 adsorption

The X/A zeolite crystal mixtures were synthesized using sugar cane bagasse ash (SCBA) as a silicon source and multilayer food packing (MFP) as an aluminum source under hydrothermal conditions at 80 °C for 79–296 hours.

Development and Environmental Applications of Activated Carbon Cloths

Activated carbon cloths have received growing attention because they offer comparative advantages over the traditional powdered or granular forms of this well-known adsorbent, providing further potential uses for technological innovations in several fields. The present article provides an overview of research studies and advances concerned with the development of activated carbon cloths and their use as adsorbent in environmental applications, mostly reported in the last years. The influence of some fabrics and textile wastes used as precursors, and of main activation process variables on the development and physicochemical, mechanical and/or electrical properties of the resulting activated carbon cloths are first reviewed. Then, investigations dealing with the removal of water and air pollutants by adsorption onto activated carbon cloths, including advances toward optimizing their regeneration after organic vapors saturation, are presented.

Sustainable and hierarchical porous Enteromorpha prolifera based carbon for CO2 capture

Nitrogen-containing porous carbon was synthesized from an ocean pollutant, Enteromorpha prolifera, via hydrothermal carbonization and potassium hydroxide activation. Carbons contained as much as 2.6% nitrogen in their as-prepared state. Physical and chemical properties were characterized by XRD, N(2) sorption, FTIR, SEM, TEM, and elemental analysis. The carbon exhibited a hierarchical structure with interconnected microporosity, mesoporosity and macroporosity. Inorganic minerals in the carbon matrix contributed to the development of mesoporosity and macroporosity, functioning as an in situ hard template. The carbon manifested high CO(2) capacity and facile regeneration at room temperature. The CO(2) sorption performance was investigated in the range of 0-75°C. The dynamic uptake of CO(2) is 61.4 mg/g and 105 mg/g at 25°C and 0°C, respectively, using 15% CO(2) (v/v) in N(2). Meanwhile, regeneration under Ar at 25°C recovered 89% of the carbon's initial uptake after eight cycles. A piecewise model was employed to analyze the CO(2) adsorption kinetics; the Avrami model fit well with a correlation coefficient (R(2)) of 0.98 and 0.99 at 0°C and 25°C, respectively.