Bioethanol production from Ficus religiosa leaves using microwave irradiation

Study of the Influence of Bamboo Suspension Water-Removal Processes on the Properties of Bamboo-Based Molding Materials

Bamboo is a fast-growing lignocellulosic plant in nature. It is an abundant and renewable resource with wide applications. The processing of bamboo results in a large amount of residue. In this paper, we developed a method to utilize bamboo residue to prepare a novel lightweight porous molding material. A hydrated thermochemical grinding process was proposed to disintegrate bamboo fibers and activate bamboo's own binding components. The influence of the water removal by pressure from bamboo suspension and subsequent different drying methods on the product's properties was evaluated. The two-step drying ensured a low production cost and high product quality. The bamboo molding material was characterized based on thermal stability, morphology, functional groups, particle size distribution, crystallinity, and mechanical strength. A lightweight porous material was obtained with a density of 0.23-0.35 g/cm3 by freeze-drying. A high mechanical strength was obtained with a tensile strength of 0.62 MPa and a compressive strength of 10.31 MPa by oven drying. The auto-adhesive mechanisms, including fiber anchorage, polymerization, water plasticization, and heat plasticization, were discussed. The bamboo molding material is a reconstruction of bamboo cell wall components and is easy to recycle. It has potential applications in construction and buildings, packaging, and indoor furnishings.

Microwave Assisted Alkaline Pretreatment of Algae Waste in the Production of Cellulosic Bioethanol

Biomass pretreatment has an important role in the production of cellulosic bioethanol. In this study, the effectiveness of microwave assisted alkaline pretreatment of algae waste was analysed. After pretreatment, the product was hydrolysed using sulphuric acid. The effects of microwave power, irradiating time, solid–liquid ratio and NaOH concentration were examined. Under the best conditions, the fermentable sugars were converted to cellulosic bioethanol using Saccharomyces Cerevisiae with a bioethanol yield of 1.93 ± 0.01 g/g and a fermentation efficiency of 40.4%. The reducing sugars concentration was 30% higher than that obtained from conventional hydrolysis without pretreatment. The obtained results suggest that microwave assisted alkaline pretreatment is effective in improving the production of cellulosic bioethanol of algae waste compared to that without microwave effect. Considering energy consumption, low microwave power and short microwave irradiation time are favourable for this pretreatment.

Microwave support of the alcoholic fermentation process of cyanobacteria Arthrospira platensis

The search for a balance between the energy-related challenges of the future and providing nutritional security has resulted in the development of a market for biofuels of successive generations. The larger their portion in biofuel production, the less the prices of agricultural products will increase. The use of algae, cyanobacteria and aquatic plants in the production of liquid fuels is an alternative. The aim of this study was to determine the effect of thermal hydrolysis on degradation of polysaccharides contained in biomass of cyanobacteria Arthrospira platensis and to assess the effectiveness of ethanol production from preconditioned biomass. The study is aimed at the selection of the most advantageous parameters of thermochemical hydrolysis to reach the experiment variant with the best effects, degree of polysaccharide degradation and effectiveness of alcohol fermentation. The experiment was divided into two stages; in stage I, the possibility of obtaining fermentable sugars by hydrothermal and chemical treatment of the substrate was tested. Stage II involved an assessment of the effectiveness of the pretreatment methods to produce bioethanol in alcohol fermentation. Yeast used in industrial ethanol production-Saccharomyces cerevisiae As4-was used in the alcohol fermentation. The results have shown that the temperature of 150 °C was the most beneficial for the process of thermohydrolysis, and the mash in the microwave-heated sample contained the highest concentration of alcohol (0.97 g/l), which is 98% more than in the control mash and 37% more than in the conventionally heated sample.

Improvement of ethanol and biogas production from sugarcane bagasse using sodium alkaline pretreatments

Sugarcane bagasse was pretreated with sodium carbonate, sodium sulfite, and sodium acetate in concentrations of 0.5 M and 0.25 M, as well as hydrothermal pretreatment, to break down its structural recalcitrance and improve biogas and ethanol production. The pretreatments were conducted at 100, 140, and 180 °C for 1 h. The highest biogas and ethanol production was observed for sugarcane bagasse pretreated with 0.5 M sodium carbonate solution at 140 °C, which was 239 ± 20 Nml CH₄/g VS, and 7.27 ± 0.70 g/l, respectively, containing gasoline equivalents of 164.2 ± 14.3 l/ton of raw bagasse and 147.8 ± 14.2 l/ton of raw bagasse, respectively. The highest gasoline equivalent was obtained for biogas production from the substrate pretreated with 0.5 M sodium sulfite solution at 100 °C (190.2 ± 2.1 l/ton of raw bagasse). In comparison to sodium carbonate and sodium sulfite, sodium acetate had less effect on biofuel production and was comparable with hydrothermal pretreatment. In contradiction to sodium acetate pretreated bagasse, in which increased pretreatment temperature intensified biofuel production, a reduction of biofuel production was observed for sodium carbonate and sodium sulfite pretreatment when temperature was increased from 140 to 180 °C. Besides considerable amounts of biofuel production at the best conditions obtained, over 762 and 543 kilotons of equivalent CO₂ can be reduced annually in Iran by biogas and ethanol production from sugarcane, respectively.

Bioethanol production from wheat straw by phosphoric acid plus hydrogen peroxide (PHP) pretreatment via simultaneous saccharification and fermentation (SSF) at high solid loadings

Phosphoric acid plus hydrogen peroxide (PHP) pretreatment was employed on wheat straw for ethanol conversion by simultaneous saccharification and fermentation (SSF) at high loadings. Results showed solid loading of PHP-pretreated wheat straw can be greatly promoted to 20%. Although more enzyme input improved ethanol conversion significantly, it still can be potentially reduced to 10-20 mg protein/g cellulose. Increasing yeast input also promoted ethanol conversion, however, the responses were not significant. Response surface method was employed to optimize SSF conditions with the strategy of maximizing ethanol conversion and concentration and minimizing enzyme and yeast input. Results indicated that ethanol conversion of 88.2% and concentration of 69.9 g/L were obtained after 120 h SSF at solid loading of 15.3%, and CTec2 enzyme and yeast were in lower input of 13.2 mg protein/g cellulose and 1.0 g/L, respectively. Consequently, 15.5 g ethanol was harvested from 100 g wheat straw in the optimal conditions.

Impact and significance of alkaline-oxidant pretreatment on the enzymatic digestibility of Sphenoclea zeylanica for bioethanol production

Gooseweed (Sphenoclea zeylanica Gaertn.) is a pest on the rice field that has a potential to be a promising substrate for bioethanol production. Dry powdered gooseweed was firstly pretreated with 1% NaOH, following 1% H₂O₂ at variety conditions. The hydrolysis process was set at 50°C for 24-72h with enzyme cellulase (β-glucosidase) while the fermentation process was carried using Saccharomyces cerevisiae TISTR 5020 at 33°C for nine days. The ethanol concentration was recorded for three, five, seven, and nine days using an ebulliometer. The results showed that the treatment with only 1% NaOH for 24h has the highest sugar performance. In regard with hydrolysis, the optimum retention time was at 24h. Lastly, the highest ethanol concentration was achieved at 11.84g/L after five days and a rapid decreasing after seven to nine days was also observed.

Anaerobic digestion of lignocellulosic biomasses pretreated with Ceriporiopsis subvermispora

Fungal pretreatment by Ceriporiopsis subvermispora of two forest residues (hazel and acacia branches) and two agricultural lignocellulosic residues (barley straw and sugarcane bagasse) were studied as a pretreatment to improve their subsequent anaerobic digestion for methane production. Biomass samples were grinded to 2 ranges of particle sizes (<4 or 1 mm), autoclaved, inoculated with two strains of C. subvermispora (ATCC 90467 and ATCC 96608) and incubated at 28 °C for 28 days. The effects of fungal pretreatment were assessed by analyzing the samples before and after incubations for dry solids mass, biochemical composition, bio-methane production (BMP) and availability of cellulose to hydrolysis. The production of ligninolytic enzymes MnP and/or laccase was observed with both strains during incubation on most of the samples tested. It almost doubled the hazel branches BMP per unit mass of dry solids but did not improve however the BMP of the agricultural residues and acacia branches. These observations were explained by the fact that although both strains were able to degrade 20-25% of lignin in <1 mm and <4 mm hazel branches samples, none of them was successful however to significantly degrade lignin in the other samples, except for sugarcane bagasse.