Substituting freshwater: Can ocean desalination and water recycling capacities substitute for groundwater depletion in California?

Effective salt removal from domestic reverse osmosis reject water in a microbial desalination cell

Microbial desalination cells (MDC) are evaluated as an environmentally friendly approach for purifying saline water by using power generated by the decomposition of organic materials in the wastewater. The present study is to evaluate the ferrocyanide-redox and biocathode approach in treating simulated saline water and subsequently recovering bio-electricity using actual domestic reverse osmosis reject water. For the desalination of simulated saline water and domestic reverse osmosis reject water, a three-chamber microbial desalination cell with graphite electrodes and anion and cation exchange membranes was constructed. When treating simulated saline water, the biocathode technique achieved a 5% improvement in salt removal and a 4.9% increase in current and power density when compared to the ferrocyanide-redox approach. When biocathode MDC was used to treat domestic reverse osmosis reject water, a maximum current and power density of 3.81 μA/cm² and 0.337 μW/cm², respectively, were recorded, as well as COD removal of 83.9% at the desalination chamber and ions reduction for Na, K, and Ca of up to 79%, 76.5%, and 72%, respectively, in a batch operation for 31 days with a stable pH (≈ 7). Thus, the study revealed a microbial desalination cell capable of recovering bioenergy and reducing salt from domestic reverse osmosis reject water with a consistent pH range.

Water Saving and Cost Analysis of Large-Scale Implementation of Domestic Rain Water Harvesting in Minor Mediterranean Islands

This paper describes a novel methodology to evaluate the benefits of large-scale installation of domestic Rain Water Harvesting (RWH) systems in multi-story buildings. The methodology was specifically developed for application to small settlements of the minor Mediterranean islands characterized by sharp fluctuations in precipitation and water demands between winter and summer periods. The methodology is based on the combined use of regressive models for water saving evaluation and of geospatial analysis tools for semi-automatic collection of spatial information at the building/household level. An application to the old town of Lipari (Aeolian islands) showed potential for high yearly water savings (between 30% and 50%), with return on investment in less than 15 years for about 50% of the installed RWH systems.