The potential use of natural vs commercial biosorbent material to remediate stream waters by removing heavy metal contaminants

Recent approaches and advancement in biochar-based environmental sustainability: Is biochar fulfilling the sustainable development goals?

This review highlights the application of biochar (BC) for attaining different SDGs (SDG 6: clean water and sanitation, SDG 7: affordable and clean energy, SDG 13: climate action, and SDG 15: life on land). These goals coincide with the various existing environmental problems including wastewater treatment, soil amendment, greenhouse gas remediation, and bioenergy generation. So, the review encompasses the various mechanisms involved in the BC-assisted treatment and reclamation of water, pollutant immobilization and enhancing soil properties, reduction of greenhouse gas emission during the wastewater treatment process and soil amendment mechanisms, bioenergy generation through various electrode material, biodiesel production, and many more. The review also explains the various drawbacks and limitations of BC application to the available environmental issues. Conclusively, it was apprehended that BC is an appropriate material for several environmental applications. More research interventions are further required to analyze the applicability of different BC materials for attaining other available SDGs.

Heavy metals biosorption in unary, binary, and ternary systems onto bacteria in a moving bed biofilm reactor

Toxic and heavy metals cause direct and indirect damage to the environment and ultimately to humans. This study involved the isolation of indigenous bacteria from heavy metal-contaminated environments that have the ability to bioabsorb heavy metals such as cadmium, nickel, and lead. The bioabsorption process was optimized by varying parameters such as temperature, metal concentration, number of bacteria, pH, and more. The bacterial isolates were investigated in terms of morphology, biochemistry, and phylogeny, with 12 strains chosen in the initial stage and one strain chosen in the final stage. It should be remembered that the metal uptake capacity of all isolates was approximately calculated. A box and reactor were designed to house these optimized microorganisms. Based on biochemical, morphological, and molecular results, the isolated strain was found to be closely related to the Bacillus genus. In the first five steps of testing, the ideal pH for removing lead alone, lead with cadmium, lead with nickel, and lead ternary (with cadmium and nickel) by Bacillus bacteria was found to be 7, 6, 5.5, and 6.5, respectively. The absorption efficiencies for single lead (unary), lead together with nickel, cadmium (binary), and ternary (lead with cadmium and nickel) were found to be 0.36, 0.25, 0.22, and 0.21 mmol/g, respectively. The ideal temperature for lead removal was around 30 °C. The adsorption isotherm for each lead metal in different states was found to be similar to the Langmuir isotherm, indicating that the surface absorption process is a single-layer process. The kinetics of the process follow the second-order kinetic model. The amount of Bacillus bacteria biomass obtained during this process was approximately 1.5 g per liter.

Removing Heavy Metals: Cutting-Edge Strategies and Advancements in Biosorption Technology

This article explores recent advancements and innovative strategies in biosorption technology, with a particular focus on the removal of heavy metals, such as Cu(II), Pb(II), Cr(III), Cr(VI), Zn(II), and Ni(II), and a metalloid, As(V), from various sources. Detailed information on biosorbents, including their composition, structure, and performance metrics in heavy metal sorption, is presented. Specific attention is given to the numerical values of the adsorption capacities for each metal, showcasing the efficacy of biosorbents in removing Cu (up to 96.4%), Pb (up to 95%), Cr (up to 99.9%), Zn (up to 99%), Ni (up to 93.8%), and As (up to 92.9%) from wastewater and industrial effluents. In addition, the issue of biosorbent deactivation and failure over time is highlighted as it is crucial for the successful implementation of adsorption in practical applications. Such phenomena as blockage by other cations or chemical decomposition are reported, and chemical, thermal, and microwave treatments are indicated as effective regeneration techniques. Ongoing research should focus on the development of more resilient biosorbent materials, optimizing regeneration techniques, and exploring innovative approaches to improve the long-term performance and sustainability of biosorption technologies. The analysis showed that biosorption emerges as a promising strategy for alleviating pollutants in wastewater and industrial effluents, offering a sustainable and environmentally friendly approach to addressing water pollution challenges.

Porous carbons prepared from a novel hard wood composite waste for effective adsorption of Pb(ii) and Cd(ii) ions

In our previous investigations, a hard wood composite (HWC) was formulated by adding rice straw, as a filler to the recycled polystyrene foam waste at mass ratio (50/50) at 170 °C and pressed under 40 kPa. Here, the disposed HWC product as a model scrap was applied for production of porous carbons enclosed with graphene sheets. To attain this approach, HWC was hydrothermally carbonized (S1) followed by either post-heat treatment (S2) or potassium hydroxide (KOH, S3) activation at 750 °C for 2 hours. The properties of prepared samples were evaluated using SEM, ATR-IR, and porosity measurements. The adsorption performance of the obtained porous carbons toward removal of lead (Pb(ii)) and cadmium (Cd(ii)) ions from aqueous solutions was investigated under different operating conditions like contact time, initial pH, initial metal ions concentration and adsorbent dose. Kinetic models such as pseudo-first order, pseudo-second order and intraparticle diffusion were used to analyze the adsorption data. Langmuir, Freundlich, Dubinin-Radushkevich and Redlich-Peterson isotherms were applied. Thermodynamics and regeneration studies were performed. The sample (S3) comprised a micro-mesoporous carbon structure encompassed by graphene sheets, with the largest total surface area (422 m2 g-1) and adsorption capacities for Pb(ii) and Cd(ii) ions of 207.9 and 119.6 mg g-1, respectively. The experimental adsorption data were best elucidated using Langmuir and pseudo second-order kinetic models. Thermodynamic experiments confirmed that adsorption is an endothermic and spontaneous process. Conclusively, the investigated HWC waste is a promising carbonaceous precursor for preparing effective porous graphene-carbons used in the removal heavy metals from their aqueous stream.

Rhizosphere environmental factors regulated the cadmium adsorption by vermicompost: Influence of pH and low-molecular-weight organic acids

Vermicompost is a promising amendment for immobilization of cadmium (Cd) in soils; however, its effectiveness can be influenced by rhizosphere environment conditions, such as pH and the presence of low-molecular-weight organic acids (LMWOAs). In this study, a batch experiment was conducted to examine the characteristics of Cd adsorption by vermicompost at different pH (pH = 3, 5, and 7) and after the addition of different LMWOAs (oxalic acid; citric acid; malic acid). Furthermore, a series of morphology and structural analyses were conducted to elucidate the mechanisms of observed effects. The results showed that the adsorption capacity of vermicompost for Cd increased as pH increased, and chemisorption dominated the adsorption process. Changes in pH altered adsorption performance by affecting the -OH groups of alcohol/phenol and the -CH2 groups of aliphatics. Further, the addition of oxalic acid promoted Cd adsorption, and the effect was concentration dependent. Modifying the verimicompost surface with more adsorption sites might be the main reason. Conversely, citric acid and malic acid showed the ability to inhibit Cd adsorption by vermicompost. Citric acid caused a blocking effect by covering flocculent substances on the vermicompost surface while reducing surface adsorption sites by dissolving mineral components such as iron oxides. However, the action of malic acid did not appear to be related to changes in morphology or the structure of vermicompost. Overall, the results of this study partially explain the limited effectiveness of Cd immobilization within the rhizosphere by vermicompost, and provide theoretical support for regulating rhizosphere environments to improve the effectiveness of vermicompost immobilization of Cd.

A comprehensive review on immobilized microbes - biochar and their environmental remediation: Mechanism, challenges and future perspectives

The environment worldwide has been contaminated by toxic pollutants and chemicals through anthropogenic activities, industrial growth, and urbanization. Microbial remediation is seen to be superior compared to conventional remediation due to its low cost, selectivity towards particular metal ions, and high efficiency. One key strategy in enhancing microbial remediation is employing an immobilization technique with biochar as a carrier. This review provides a comprehensive summary of sources and toxic health effects of hazardous water pollutants on human health and the environment. Biochar enhances the growth and proliferation of contaminant-degrading microbes. The combined activity of biochar and microbes in eliminating the contaminants has gained the researcher's interest. Biochar demonstrates its biocompatibility by fostering microbial populations, the release of enzymes, and protecting the microbes from the acute toxicity of surrounding contaminants. The current review complies with the immobilization technique and remediation mechanisms of microbes in pollutant removal. This review also emphasizes the combined utilization, environmental adaptability, and the potential of the combined effect of immobilized microbes and biochar in the remediation of contaminants. Challenges and future outlooks are urged to commercialize the immobilized microbes-biochar interaction mechanism for environmental remediation.

An application of waste algae biochar in aquaculture water to remove co-existed cadmium and PAHs and the corresponding mechanism

Water quality in aquaculture farms is highly related to the quality of aquaculture products and the connected environment. Cadmium (Cd²⁺) and polycyclic aromatic hydrocarbons (PAHs) are two of the most common pollutants in the aquaculture water, while biochar derived from waste algae (Enteromorpha prolifera), namely BE, was applied in farms ponds to improve water quality. Firstly, the adverse environmental impact of BE was minor, while the concentrations of the heavy metal (Cd²⁺ in the present study) and PAHs (FLU, PHE, FLT and PYR) were removed with efficiencies of 49%, 88%, 90%, 91% and 88%, respectively. The ecological risk values (RQs) were reduced subsequently with a rate of 58 ± 11%. After dosing BE, the ecological risk values in all the studied ponds were lower than 1, indicating no ecological risk in the corresponding aquaculture environment. The sorption capacities (q_m) of BE were 15, 12, 6.3, 0.41, 0.29 and 0.56 mg·g^-1 for Cd²⁺, FLU, PHE, FLT, PYR and BaP, respectively. The sorption capacities were acceptable compared with those derived from other types of biomass. The removal mechanisms were partition (PAHs), complexation (Cd²⁺), π-π interaction (Cd²⁺ and PAHs), precipitation (Cd²⁺) and ion-exchange (Cd²⁺). Practically and theoretically, the algae biochar is applicable in the aquaculture environment, where Cd²⁺ and PAHs co-exist.

Removal of copper from sulfate solutions using biochar derived from crab processing by-product

Increasing metal demand is accelerating the mining and processing of minerals, however to ensure sustainable growth innovative approaches are required to better manage associated effluents. Biochar from the fast pyrolysis of residues from fishery and forestry operations has been studied as a low-cost, environmentally and economically friendly method for treating mine tailings and processing effluents. However, the bulk of the studies focus on terrestrial biomass (e.g. wood) and do not include potential inhibition/enhancement of adsorption due to pH controlling compounds. In this work biochar generated from snow crab (Chionoecetes Opilio) processing was studied as an adsorbent for copper solutions containing sulfate (a key compound in sulfide ore mining waters) with the objective of assessing adsorption capacity and the impact of sulfate on copper adsorption. The biochar, a porous structure comprised of calcite (CaCO₃), was alkaline and has a negative zeta potential under neutral and basic conditions. The crab biochar removed over 99% of Cu²⁺ from a 100 mg/L solution (sourced as CuSO₄) at a dosage of 5 g/L, which was higher than lignocellulosic biochar at the same biochar dosage. While metal adsorption can often be impacted at acidic conditions, Cu²⁺ adsorption was not impacted by initial acidic pH due to the biochar's buffering capacity. The Pseudo-Second Order (PSO) model fit the adsorption rate with maximum adsorption achieved in approximately 2 h. The maximum adsorption isotherm capacity was 184.8 ± 10.2 mg/g for Cu²⁺, much higher than existing commercial activated carbons and previously studied lignocellulosic biochars and followed the Freundlich isotherm. The adsorption mechanism responsible for removal of Cu²⁺ was found to be precipitation, in the form of the mineral posnjakite (Cu₄[(OH)₆SO₄]·H₂O). These results indicate for the first time that crab-based biochars are capable of adsorbing large quantities of Cu²⁺ from sulfate-rich solution, while also buffering solution pH, demonstrating promise as an acid mine drainage treatment for removal of harmful metals and reduction of acidity.

Arsenic removal approaches: A focus on chitosan biosorption to conserve the water sources

Globally, millions of people have no access to clean drinking water and are either striving for that or oppressed to intake polluted water. Arsenic is considered one of the most hazardous contaminants in water bodies that reaches there due to various natural and anthropogenic activities. Modified chitosan has gained much attention from researchers due to its potential for arsenic removal. This review focuses on the need and potential of chitosan-based biosorbents for arsenic removal from water systems. Chitosan is a low-cost, abundant, biodegradable biopolymer that possesses unique structural aspects and functional sites for the adsorption of contaminants like arsenic species from contaminated water. The chitosan-based biosorbents had also been modified using various techniques to enhance their arsenic removal efficiencies. This article reviews various forms of chitosan and parameters involved in chitosan modification which eventually affect the arsenic removal efficiency of the resultant sorbents. The literature revealed that the modified chitosan-based sorbents could express higher adsorption efficiency compared to those prepared from native chitosan. The sustainability of the chitosan-based sorbents has also been considered in terms of reusability. Finally, some recommendations have been underlined for further improvements in this domain.

A review on adsorptive separation of toxic metals from aquatic system using biochar produced from agro-waste

Water is a basic and significant asset for living beings. Water assets are progressively diminishing due to huge populace development, industrial activities, urbanization and rural exercises. Few heavy metals include zinc, copper, lead, nickel, cadmium and so forth can easily transfer into the water system either direct or indirect activities of electroplating, mining, tannery, painting, fertilizer industries and so forth. The different treatment techniques have been utilized to eliminate the heavy metals from aquatic system, which includes coagulation/flocculation, precipitation, membrane filtration, oxidation, flotation, ion exchange, photo catalysis and adsorption. The adsorption technique is a better option than other techniques because it can eliminate heavy metals even at lower metal ions concentration, simplicity and better regeneration behavior. Agricultural wastes are low-cost biosorbent and typically containing cellulose have the ability to absorb a variety of contaminants. It is important to note that almost all agro wastes are no longer used in their original form but are instead processed in a variety of techniques to improve the adsorption capacity of the substance. The wide range of adsorption capacities for agro waste materials were observed and almost more than 99% removal of toxic pollutants from aquatic systems were achieved using modified agro-waste materials. The present review aims at the water pollution due to heavy metals, as well as various heavy metal removal treatment procedures. The primary objectives of this research is to include an overview of adsorption and various agriculture based adsorbents and its comparison in heavy metal removal.

Review on upgrading organic waste to value-added carbon materials for energy and environmental applications

Value-added materials such as biochar and activated carbon that are produced using thermo-chemical conversion of organic waste have gained an emerging interest for the application in the fields of energy and environment because of their low cost and unique physico-chemical properties. Organic waste-derived materials have multifunctional abilities in the field of environment for capturing greenhouse gases and remediation of contaminated soil and water as well as in the field of energy storage and conversion. This review critically evaluates and discusses the current thermo-chemical approaches for upgrading organic waste to value-added carbon materials, performance enhancement of these materials via activation and/or surface modification, and recent research findings related to energy and environmental applications. Moreover, this review provides detailed guidelines for preparing high-performance organic waste-derived materials and insights for their potential applications. Key challenges associated with the sustainable management of organic waste for ecological and socio-economic benefits and potential solutions are also discussed.

Towards a Circular Economy: Analysis of the Use of Biowaste as Biosorbent for the Removal of Heavy Metals

Industrial human activity has led to the release of substantial amounts of heavy metals into the environment. Contamination of water with heavy metals such as lead, cadmium, copper, zinc, chromium, or nickel represents a serious problem. As part of the circular economy, it is appropriate to use biowaste from agriculture, fisheries, and the timber industry as biosorbents. In this literature review, the potential of using these biowaste groups as biosorbents for metal removal is presented. This biowaste is characterized by the presence of carboxyl, hydroxyl, carbonyl, amide, amine, sulfydryl, and other groups on their surface, which form complexes and chelates with metals present in water. Biosorption seems to be a potential alternative to conventional technologies for removing or recovering heavy metals from water or wastewater, which are uneconomical and generate additional waste. The paper demonstrates that harnessing the potential of biowaste to remove metals is beneficial to the environment as they can solve the problem of incineration and realise recycling that meets the circular economy. Although the choice of a suitable biosorbent for the removal of a particular metal involves a lot of research, the high biosorption efficiency, low cost, and renewability justify their use.

Application of biochars in the remediation of chromium contamination: Fabrication, mechanisms, and interfering species

Chromium (Cr) is one of the most toxic pollutants that has accumulated in terrestrial and aqueous systems, posing serious risks towards living beings on a worldwide scale. The immobilization, removal, and detoxification of active Cr from natural environment can be accomplished using multiple advanced materials. Biochar, a carbonaceous pyrolytic product made from biomass waste, is considered as a promising material for the elimination of Cr contamination. The preparation and properties of biochar as well as its remediation process for Cr ions have been well investigated. However, the distinct correlation of the manufacturing, characteristics, and mechanisms involved in the remediation of Cr contamination by various designed biochars is not summarized. Herein, this review provides information about the production, modification, and characteristics of biochars along with their corresponding effects on Cr stabilization. Biochar could be modified via physical, hybrid, chemical, and biological methods. The remediating mechanisms of Cr contamination using biochars involve adsorption, reduction, electron shuttle, and photocatalysis. Moreover, the coexisting ions and organic pollutants change the pattern of the remediating process of biochar in actual Cr contaminated water and soil. Finally, the present limitations and future perspectives are proposed.

Chemical structure and mechanism of polysaccharide on Pb2+ tolerance of Cordyceps militaris after Pb2+ domestication

In this study, the purified polysaccharide (DCP-I) was extracted from Cordyceps militaris domesticated with Pb²⁺. After that, the structural feature and mechanism of lead resistance of DCP-I were investigated using novel approaches. The results showed that the average molecular weight of DCP-I was 1.206 × 10³ kDa and mainly consist of Rhamnose, Galactose, Glucose, Galacturonic acid and Glucuronic acid in a molar ratio of 0.130:47.687:40.784:1.795:0.48. Besides, the main chain of DCP-I was composed by →6)-Galp-(1→, →4)-Glcp-(1→ and →1,4)-Glcp-(6→, while the side chain was →1)-Rhaf-(2→ and D-Glcp-(1→, and the DCP-I contained Alacturonic acid and Glucuronic acid. In addition, the result of Congo red test showed that DCP-I did not exist triple-helical structures. SEM, EDX and XPS analyses results showed that the functional groups of DCP-I related to C, H and O (-OH, -COOH and -C=O) could combined with Pb²⁺effectively. The adsorption processes were described by the Pseudo-second-order kinetic model (R² = 0.9978) and Langmuir isotherm (R² = 0.9979) for Pb²⁺ indicating that adsorption process of DCP-I to Pb²⁺ was a kind of single molecular layer chemical adsorption.

Determination of Cu, Ni, Mn and Zn in diesel oil samples using energy dispersive X-ray fluorescence spectrometry after solid phase extraction using sisal fiber

As a natural adsorbent, sisal (agave sisalana) fibers were used to extract Cu, Ni, Mn, and Zn from diesel oil samples for posterior determination (i.e., direct analytical measurements on the solid support) of the analytes by energy dispersive X-ray fluorescence spectrometry (EDXRF). In the proposed procedure, 0.2 g of sisal fiber was directly added to 5.0 mL of diesel oil contained in a glass tube. After 5 min of contact time, the mixture was filtered, and the collected fibers were oven-dried for 30 min at 70 °C. After drying, the analytes were quantified directly by EDXRF using the sisal fibers as a solid support. The calibration curves showed linear concentration ranges of 0.09-1.00, 0.12-1.00, 0.09-1.00, 0.06-1.0 μg g^-1 for Cu, Ni, Mn, and Zn, respectively. The limits of detection (LOD) for Cu, Ni, Mn, and Zn were 0.03, 0.04, 0.03, and 0.02 μg g^-1, respectively. The repeatability, evaluated by performing ten measurements at a concentration of 0.50 μg g^-1 for each metal, with the results expressed in terms of the relative standard deviation (RSD), was 3.2, 6.5, 6.8, and 6.1% for Cu, Ni, Mn, and Zn, respectively. The results obtained by the proposed method were compared with the results obtained by a comparative method using inductively coupled plasma optical emission spectrometry, and both results showed good agreement. The proposed method was applied for Ni, Cu, Mn, and Zn determination in diesel oil samples collected from different gas stations.

Ultrasound assisted preparation of calcium alginate beads to improve absorption of Pb+2 from water

Calcium alginate (CaAlg) beads were prepared using ultrasound for use in the removal of lead from natural and wastewaters by ion exchange. Ultrasound was applied in a batch mode with an ultrasonic bath or in a flow mode using an ultrasonic clamp-on device. For comparison purposes the synthesis was performed in batch mode in the absence of the ultrasound. The beads prepared using ultrasound showed a greater ion exchange capability which could be ascribed to a larger specific surface area as a result of surface roughening induced by cavitation. Scanning Electron Microscopy (SEM) images revealed that the roughening was in the form of corrugation for the product with the best ion exchange capability obtained in the flow process where preformed CaAlg droplets were subjected to ultrasound during the setting process. These beads performed 11% better for lead removal than those synthesized in the absence of ultrasound.

Application of a polyethylenimine-modified polyacrylonitrile-biomass waste composite fiber sorbent for the removal of a harmful cyanobacterial species from an aqueous solution

Cyanobacterial harmful algal blooms (Cyano-HABs) in water resources involving algal species such as Microcystis aeruginosa have become a serious environmental issue due to their severely negative effects. In the present study, an adsorption-based strategy was employed to control M. aeruginosa, with industrial waste-derived Escherichia coli biomass valorized to produce polyethylenimine-modified polyacrylonitrile-E. coli biomass composite fiber (PEI-PANBF). PEI-PANBF removed approximately 80% of M. aeruginosa cells from an aqueous solution without causing any cell damage. Interestingly, the thickness of PEI-PANBF had a strong influence on the efficiency of M. aeruginosa cell removal. In addition, PEI-PANBF simultaneously removed M. aeruginosa cells and their toxic secondary metabolite, microcystin-LR, from aqueous media. Thus, our proposed fiber represents a feasible utilization method of industrial waste biomass as a biosorbent for the control of Cyano-HABs.

Seafood Waste as Attractive Source of Chitin and Chitosan Production and Their Applications

Chitosan is a cationic polymer obtained by deacetylation of chitin, found abundantly in crustacean, insect, arthropod exoskeletons, and molluscs. The process of obtaining chitin by the chemical extraction method comprises the steps of deproteinization, demineralization, and discoloration. To obtain chitosan, the deacetylation of chitin is necessary. These polymers can also be extracted through the biological extraction method involving the use of microorganisms. Chitosan has biodegradable and biocompatible properties, being applied in the pharmaceutical, cosmetic, food, biomedical, chemical, and textile industries. Chitosan and its derivatives may be used in the form of gels, beads, membranes, films, and sponges, depending on their application. Polymer blending can also be performed to improve the mechanical properties of the bioproduct. This review aims to provide the latest information on existing methods for chitin and chitosan recovery from marine waste as well as their applications.

Comparison of adsorption behavior studies of Cd2+ by vermicompost biochar and KMnO4-modified vermicompost biochar

Cd²⁺ pollution in aquatic environments can pose a serious threat to human health. Biochar can remove Cd²⁺ from aquatic environments, but the Cd²⁺adsorption capacity of conventional biochar is low, therefore, we focused on exploring the Cd²⁺ adsorption capacity of modified biochar. In this study, KMnO₄ was used to modify vermicompost biochar (VBC), and static adsorption tests for Cd²⁺ were carried out. The biochar properties and its adsorption efficiency toward Cd²⁺ before and after modification were studied by kinetics and isotherm model fitting, scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDS), Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). Additionally, an adsorption mechanism was discussed. The results showed that the KMnO₄-modification resulted in a successful loading of the vermicompost biochar with MnO₂, which greatly improved its adsorption capacity for Cd²⁺. The adsorption of Cd²⁺ by VBC and MVBC was a spontaneous, endothermic, and monolayer chemical adsorption process. Mineral precipitation mechanism accounted for the largest proportion, and CdCO₃ was the main precipitate. After modification the proportion of surface precipitation and other mechanisms (π-electron coordination and the inner/outer sphere surface coordination) increased，while adsorption via cation exchange, oxygen-containing functional groups, physical adsorption and electrostatic attraction reduced. Hence, KMnO₄ modification has a significant effect on the Cd²⁺ adsorption behavior of vermicompost biochar.

Soil amendments enhanced the growth of Nicotiana alata L. and Petunia hydrida L. by stabilizing heavy metals from wastewater

Due to the non-degradable nature of heavy metals (HMs), the industrial effluent, whether treated or untreated, carrying HMs, eventually end up into the water bodies, soil, and sediments. Numerous countermeasures were applied, but the use of ornamental plants for the stress mitigation associated with HMs on the environment is a neglected research domain. The composition of wastewater influences bioremediation strategies. As the wastewater is contaminated with multiple HMs, many lab studies, with the plants, failed in the industrial field. This work focuses on the potential of Nicotiana alata L. and Petunia hydrida L. against multiple HMs contaminated synthetic wastewater. To improve plant tolerance, soil amendments (biochar, compost, and moss, each at 5% v/v in soil) were used, individually and in combination. After 6 weeks of the exposure, plant physiological, biochemical and enzymatic parameters, as well as the distribution of HMs, (Cd, Cr, Cu, Pb, Mn, Ni, and Zn) in the plant (flower, leaves, root, and shoot) and soil, were measured. The HMs uptake positivity influenced the malondialdehyde content, hydrogen peroxide content and electrolyte leakage, while negatively to photosynthetic pigments, and resulted in increased catalase, guaiacol peroxidase, glutathione s-transferase, ascorbate peroxidase, while reduced superoxide dismutase activity. It was found that all amendments improved the plant growth by metal stabilization, and best results were obtained with the combined application of biochar + compost + moss. So, HMs stabilization can be achieved by growing ornamental plants, like Nicotiana alata L. and Petunia hydrida L. along with soil amendments.

Editorial: Technically-based use of by-products as a tool to control pollution

This Virtual Special Issue of Journal of Environmental Management dealt with the recycling of waste and by-products, focusing on their use in controlling environmental pollution. The field of research was previously considered as promising, in view of its relevance and the increasing number of papers published in last years. And this Special Issue allows going a step ahead in the matter, with 90 submissions and a number of 48 high quality papers finally accepted and published. We think that it will be useful at a global level, especially for researchers, social partners, and social actors involved in environmental and public health issues related to environmental pollution.

The effect of biochar mild air oxidation on the optimization of lead(II) adsorption from wastewater

In the present study, the effects of mild air oxidation of a biochar produced by the Pyrovac Inc. pyrolysis process, on the adsorption of lead(II) from synthetic wastewater under batch experimental conditions have been investigated. The adsorption experiments were performed under several conditions suggested by the response surface methodology, which allowed finding the optimal conditions, in order to maximize the adsorption capacity (Q(mgg^-1)), as well as the extraction efficiency (E (%)). The optimal conditions of lead ions adsorption were as follows: pH = 5, agitation time = 300 min, adsorbent mass = 0.5 g (per 50 cm³ of solution), and lead initial concentration = 100gm^-3, resulted in an adsorption capacity of 7.9 mg g^-1. Equilibrium adsorption was then obtained by keeping pH and adsorbent mass at the optimal values and changing the lead initial concentration for a sufficient agitation time. Results showed that mild air oxidation increased the equilibrium adsorption capacity of biochar from 2.5 to 44 mg g^-1. Oxidized biochar after equilibrium adsorption was submitted to SEM/EDX and XPS analysis. From SEM it was found that lead particles were distributed heterogeneously after adsorption. From XPS analysis, it was revealed that the external surface of oxidized biochar particles becomes saturated for the initial point of equilibrium diagram, obtained at lead initial concentration of 100gm^-3, suggesting that for a higher concentration, the internal surfaces of particles participate in the cations adsorption. The participation of surface functional groups in the adsorption process showed that carbonyl, carboxylic, and aromatic rings of oxidized biochar were involved in the adsorption. This work suggests that the very simple process of mild air oxidation can be used instead of the usual costly chemical activation, in order to improve biochar cation exchange capacity.