Enhanced tetracycline removal by in-situ NiFe nanoparticles coated sand in column reactor

Study on mechanism of removal of sudden Tetracycline by compound modified biological sand filtration process

The removal of tetracycline from the sewage plant effluents through advanced treatment methods is key to controlling tetracycline levels in the water environment. In this study, modified quartz sands (QS) were used in a biological sand filter to remove tetracycline. The modified QS, with different surface characteristics, were prepared using glass etching technology combined with subsequent chemical modification methods, including hydroxylation treatment, metal ion modification, and amino modification. The adsorption efficiency of hydroxylated QS was higher than that of metal ion modified and amino modified QS, with adsorption efficiencies of 20.4331 mg/kg, 12.8736 mg/kg, and 10.1737 mg/kg, respectively. Results indicated that QS primarily reduce tetracycline through adsorption. Adsorption on ordinary QS fit the pseudo-first-order kinetic model, while adsorption on other modified QS and biofilm-coated QS fit the pseudo-second-order kinetics model. Biodegradation was identified as another mechanism for tetracycline reduction, which fit the zero-order kinetic model. Pseudomonas alcaligenes and unclassified Pseudomonas accounted for 96.6% of the total tetracycline-degrading bacteria. This study elucidates the effectiveness and mechanisms of five types of QS in treating tetracycline from sewage plant effluents. It provides a novel method for tetracycline reduction in real-world wastewater scenarios.

Recent advances in bimetallic nanoscale zero-valent iron composite for water decontamination: Synthesis, modification and mechanisms

The environmental pollution of water is one of the problems that have plagued human society. The bimetallic nanoscale zero-valent iron (BnZVI) technology has increased wide attention owing to its high performance for water treatment and soil remediation. In recent years, the BnZVI technology based on the development of nZVI has been further developed. The material chemistry, synthesis methods, and immobilization or surface stabilization of bimetals are discussed. Further, the data of BnZVI (Fe/Ni, Fe/Cu, Fe/Pd) articles that have been studied more frequently in the last decade are summarized in terms of the types of contaminants and the number of research literatures on the same contaminants. Five contaminants including trichloroethylene (TCE), Decabromodi-phenyl Ether (BDE209), chromium (Cr(VI)), nitrate and 2,4-dichlorophenol (2,4-DCP) were selected for in-depth discussion on their influencing factors and removal or degradation mechanisms. Herein, comprehensive views towards mechanisms of BnZVI applications including adsorption, hydrodehalogenation and reduction are provided. Particularly, some ambiguous concepts about formation of micro progenitor cell, production of hydrogen radicals (H·) and H2 and the electron transfer are highlighted. Besides, in-depth discussion of selectivity for N2 from nitrates and co-precipitation of chromium are emphasized. The difference of BnZVI is also discussed.

Remediation of Pb (II), Cd (II), and Zn (II) from aqueous solutions using porous (styrene-divinylbenzene)/Cu-Ni bimetallic nanocomposite microspheres: continuous fixed-bed column study

Bimetallic nanoparticles (BNPs) have been used as a new line of defence against heavy metal contamination among several types of nanoparticles (NPs) due to their enhanced, synergistic activity. In this study, we investigated the adsorption behaviour of porous (styrene-divinylbenzene)/CuNi bimetallic nanocomposite (P(St-DVB)/CuNi BNC) in a continuous flow fixed-bed column and its ability to remove Pb (II), Cd (II), and Zn (II) ions from aqueous solutions. We examined how the initial metal concentration, flow rate, and bed height affected the adsorption characteristics. Experimental results confirmed that the adsorption capacity increased with increase in influent metal concentration and bed height and decreased with increase in flow rate. The breakthrough and the column kinetic parameters were successfully predicted with three mathematical models: Thomas, Yoon-Nelson, and Adams-Bohart models. Both Thomas and Yoon-Nelson models showed good agreement with the experimental results for all the operating conditions. Successful desorption of heavy metals from the P(St-DVB)/CuNi BNC was performed using 0.5 M NaOH solution, and it showed good reusability of the adsorbent during four adsorption-desorption cycles. The results show that P(St-DVB)/CuNi BNC are effective and low-cost adsorbents, and they can be used in real-time large-scale industrial water treatment processes for the removal of heavy metals.

A Comprehensive Review for Groundwater Contamination and Remediation: Occurrence, Migration and Adsorption Modelling

The provision of safe water for people is a human right; historically, a major number of people depend on groundwater as a source of water for their needs, such as agricultural, industrial or human activities. Water resources have recently been affected by organic and/or inorganic contaminants as a result of population growth and increased anthropogenic activity, soil leaching and pollution. Water resource remediation has become a serious environmental concern, since it has a direct impact on many aspects of people's lives. For decades, the pump-and-treat method has been considered the predominant treatment process for the remediation of contaminated groundwater with organic and inorganic contaminants. On the other side, this technique missed sustainability and the new concept of using renewable energy. Permeable reactive barriers (PRBs) have been implemented as an alternative to conventional pump-and-treat systems for remediating polluted groundwater because of their effectiveness and ease of implementation. In this paper, a review of the importance of groundwater, contamination and biological, physical as well as chemical remediation techniques have been discussed. In this review, the principles of the permeable reactive barrier's use as a remediation technique have been introduced along with commonly used reactive materials and the recent applications of the permeable reactive barrier in the remediation of different contaminants, such as heavy metals, chlorinated solvents and pesticides. This paper also discusses the characteristics of reactive media and contaminants' uptake mechanisms. Finally, remediation isotherms, the breakthrough curves and kinetic sorption models are also being presented. It has been found that groundwater could be contaminated by different pollutants and must be remediated to fit human, agricultural and industrial needs. The PRB technique is an efficient treatment process that is an inexpensive alternative for the pump-and-treat procedure and represents a promising technique to treat groundwater pollution.

Measuring the occurrence of antibiotics in surface water adjacent to cattle grazing areas using passive samplers

A wide variety of antibiotics and other pharmaceuticals are used in livestock production systems and residues passed to the environment, often unmetabolized, after use and excretion. Antibiotic residues may be transported from manure-treated soils via runoff and are also capable of reaching surface and groundwater systems through a variety of pathways. The occurrence and persistence of antibiotics in the environment is a concern due to the potential for ecological effects and proliferation of environmental antibiotic resistance in pathogenic organisms. In the present study, the occurrence and seasonal variation of 24 commonly-used veterinary antibiotics was evaluated in surface water adjacent to several livestock production systems using Polar Organic Chemical Integrative Samplers (POCIS). Uptake rates for all compounds, nine of which have not been previously reported, were measured in the laboratory to permit estimation of changes in the time-weighted average (TWA) antibiotic concentrations during exposure. The antibiotics detected in POCIS extracts included sulfadimethoxine, sulfamethoxazole, trimethoprim, sulfamerazine, sulfadiazine, lincomycin, erythromycin, erythromycin anhydro- and monensin. The maximum TWA concentration belonged to sulfadiazine (25 ng/L) in the August-September sampling period and coincided with the highest number of precipitation events. With the exception of monensin that showed an increase in concentration over the stream path, none of the detected antibiotics were prescribed to livestock at the facility. The detection of antibiotics not prescribed by the facility may be attributable to the environmental persistence of previously used antibiotics, transfer by wind from other nearby livestock production sites or industrial uses, and/or the natural production of some antibiotics.

Tetracycline affects the toxicity of P25 n-TiO2 towards marine microalgae Chlorella sp

Pollutants such as n-TiO2 and tetracycline enter the marine environment through various sources starting from their production until disposal. Hence, it is vital to determine the interactive effect of one pollutant with the other when they coexist in the environment. In the present study, the effect of antibiotic - tetracycline (TC) on the toxicity of P25 n-TiO2 was studied with marine microalgae, Chlorella sp. The impact of TC (1 mg L-1) on five different concentrations of n-TiO2 (0.25, 0.5, 1, 2 and 4 mg L-1) under both visible and UV-A illuminations was evaluated. Effective diameter of n-TiO2 in ASW at 0th h increased from 690.69 ± 19.55 nm (0.25 mg L-1) to 1183.04 ± 37.10 nm (0.25 mg L-1 + 1 mg L-1) and 971.51 ± 14.61 nm (4 mg L-1) to 1324.12 ± 11.59 nm (4 mg L-1 + 1 mg L-1) in presence of TC. A significant increase in the toxicity of 4 mg L-1 n-TiO2 upon the addition of TC (68.16 ± 0.37% under visible and 80.21 ± 0.3% under UV-A condition) was observed. No significant difference in toxicity was observed between visible and UV-A illuminations. Further the toxicity data was corroborated through the measurement of oxidative stress and antioxidant enzyme activities. Independent action model showed antagonistic effect for lower concentrations of n-TiO2 and additive effect for higher concentrations of n-TiO2 when present in mixture with TC under both illuminations. For the higher mixture concentration of 4 mg L-1 n-TiO2 and 1 mg L-1 TC, the percentage TC removal was about 55.29% and 30% and the corresponding TOC removal was found to be 54.29% and 31.04% under visible and UV-A illuminations respectively. The site of ROS generation in Chlorella sp. was identified with electron transfer chain inhibitors. Both mitochondria and chloroplast acted as the site for the ROS generation in Chlorella sp. The SEM images of the algal cells upon exposure to n-TiO2 and mixture revealed the aggregation of cells and distortion of cell membrane.

Photo-Assisted Removal of Tetracycline Using Bio-Nanocomposite-Immobilized Alginate Beads

In the present study, we report an efficient method for tetracycline (TC) removal from contaminated wastewater using alginate beads, immobilized with bio nanocomposite (BNC) consisting of Fe3O4 (iron oxide) and TiO2 (titanium dioxide) nanoparticles along with dead biomass of TC-resistant bacteria Acinetobacter sp. Chemically synthesized Fe3O4 nanoparticles and commercially available TiO2 (P25) nanoparticles were combined to form nanocomposite followed by encapsulation within alginate beads along with heat-killed biomass of Acinetobactersp. for the efficient degradation and adsorption of the target pollutant. The primary characterization of chemically synthesized nanoparticles was carried out with Fourier transform infrared, scanning electron microscopy-energy-dispersive X-ray spectrometry, transmission electron microscopy, and X-ray diffraction techniques. The batch studies for TC removal were performed by varying the reaction parameters such as bead weight, initial TC concentration, and pH in a photoreactor with UV-C irradiation. TC concentration of 10 mg/L, bead weight 10 g, and pH 6 were fixed as the optimum condition where 98 ± 0.5% of TC was removed from the solution. The possible removal mechanism was investigated with the help of UV-visible, total organic carbon, oxidation-reduction potential, Brunauer-Emmett-Teller, and liquid chromatography-mass spectroscopy analyses. The applicability of the process was successfully tested with the natural water systems spiked with TC at 10 mg/L. To assess the ecotoxic effects of the treated effluents, the cell viability assay was performed with the algal strains, Chlorella, and Scenedesmussp. and the bacterial strains, Pseudomonas aeruginosaand Escherichia coli. Finally, the reusability of the BNC bead was successfully established up to the 4th cycle.