The biodegradation of carbaryl in soil with Rhodopseudomonas capsulata in wastewater treatment effluent

Improved photocatalytic decomposition of carbaryl pesticide in wastewater using ZnO nanorods

This study explores the enhanced photocatalytic performance of ZnO nanorods (ZnO-R) for degrading the carbaryl pesticide (CB) in wastewater. For comparison, commercial ZnO (ZnO-C) was used to evaluate the differences in the photocatalytic decomposition of CB between ZnO-R and ZnO-C. The results regarding the material properties demonstrated that ZnO-R enhances CB removal performance due to its unique rod shape, which extends light absorption and improves electron-hole separation. The removal rates of the carbaryl pesticide from the aqueous solution using ZnO-R and ZnO-C were 98.2% and 87.3%, respectively. Besides, the presence of other pesticides had a more negative impact on the performance of CB than inorganic contaminants. The degradation rates of CB using ZnO-R in wastewater were 99.8%, 68.2%, and 21.7% under UV, solar, and visible light, respectively. In addition, the degradation mechanism of CB using ZnO-R under UV light was proposed based on the n-type photocatalysis process. This work provides a method for selecting a suitable type of ZnO photocatalyst to control pesticide residue pollutants that are commonly found in agricultural activities.

Preparation of Au-RGO/TiO2 nanotubes and study on the photocatalytic degradation of ciprofloxacin

Au-RGO/TiO₂ nanotubes were prepared by anodic oxidation and electrochemical deposition, and their performance in the photocatalytic degradation of ciprofloxacin was investigated. The results showed that, compared with TiO₂ nanotubes and RGO/TiO₂ nanotubes, the Au-RGO/TiO₂ nanotubes had the highest ciprofloxacin degradation rate, reaching 96.93% in 180 min of photocatalysis. In addition, the possible degradation products of ciprofloxacin were analyzed by liquid chromatography-mass spectrometry, and the mechanism of degradation of ciprofloxacin by Au-RGO/TiO₂ nanotubes was analyzed.

Highly porous seeding-free boron-doped ultrananocrystalline diamond used as high-performance anode for electrochemical removal of carbaryl from water

Boron-doped diamond (BDD) electrodes are regarded as the most promising catalytic materials that are highly efficient and suitable for application in advanced electrochemical oxidation processes targeted at the removal of recalcitrant contaminants in different water matrices. Improving the synthesis of these electrodes through the enhancement of their morphology, structure and stability has become the goal of the material scientists. The present work reports the use of an ultranano-diamond electrode with a highly porous structure (B-UNCD_WS/TDNT/Ti) for the treatment of water containing carbaryl. The application of the proposed electrode at current density of 75 mA cm^-2 led to the complete removal of the pollutant (carbaryl) from the synthetic medium in 30 min of electrolysis with an electric energy per order of 4.01 kWh m^-3 order^-1. The results obtained from the time-course analysis of the carboxylic acids and nitrogen-based ions present in the solution showed that the concentrations of nitrogen-based ions were within the established maximum levels for human consumption. Under optimal operating conditions, the proposed electrode was successfully employed for the complete removal of carbaryl in real water. Thus, the findings of this study show that the unique, easy-to-prepare BDD-based electrode proposed in this study is a highly efficient tool which has excellent application potential for the removal of recalcitrant pollutants in water.

Simultaneous multi-residue pesticide analysis in southern Brazilian soil based on chemometric tools and QuEChERS-LC-DAD/FLD method

A simple and straightforward QuEChERS extraction method was proposed for the simultaneous determination of atrazine (ATZ), desethylatrazine (DEA), desisopropylatrazine (DIA), carbaryl (CBL), carbendazim (CBD), and diuron (DIU) in soil with high agricultural activity from southeastern Brazil, using high-performance liquid chromatography-diode-array detection/fluorescence detection. Screening studies carried out by 2⁴ factorial design indicate better recoveries when less sample (1.0 g) and the volume of solvent (2.0 mL of ACN) were applied, compared to the original QuEChERS method. Furthermore, interactions between factors were not negligible in the experimental set, except for ATZ and DIU, in which only water volume influenced their recovery. The influence of the type (primary secondary amine (PSA), C18, and Florisil) and the sorbent amount ratio to the compounds' concentration were also considered. PSA (25 mg) was selected as the best sorbent without losing analytical response. The limits of quantification (LOQ) were estimated to be 5.0 to 15 µg kg^-1 in the soil matrix. Analytical performances were consistent with linearity (R² ≥ 0.998), recovery from 74.7 to 108%, and relative standard deviations (RSD) between 2.6 and 20.2%. Robustness was assessed by fractional factorial Plackett-Burman design. The method is recommended for chemicals that are soluble in water, and it was successfully applied in the analysis of real soil samples containing the analytes in the range of μg kg^-1, proving to be suitable for the study of soils strongly impacted by agricultural activity.

Display of a novel carboxylesterase CarCby on Escherichia coli cell surface for carbaryl pesticide bioremediation

Background

Carbamate pesticides have been widely used in agricultural and forestry pest control. The large-scale use of carbamates has caused severe toxicity in various systems because of their toxic environmental residues. Carbaryl is a representative carbamate pesticide and hydrolase/carboxylesterase is the initial and critical enzyme for its degradation. Whole-cell biocatalysts have become a powerful tool for environmental bioremediation. Here, a whole cell biocatalyst was constructed by displaying a novel carboxylesterase/hydrolase on the surface of Escherichia coli cells for carbaryl bioremediation.

Results

The carCby gene, encoding a protein with carbaryl hydrolysis activity was cloned and characterized. Subsequently, CarCby was displayed on the outer membrane of E. coli BL21(DE3) cells using the N-terminus of ice nucleation protein as an anchor. The surface localization of CarCby was confirmed by SDS–PAGE and fluorescence microscopy. The optimal temperature and pH of the engineered E. coli cells were 30 °C and 7.5, respectively, using pNPC4 as a substrate. The whole cell biocatalyst exhibited better stability and maintained approximately 8-fold higher specific enzymatic activity than purified CarCby when incubated at 30 °C for 120 h. In addition, ~ 100% and 50% of the original activity was retained when incubated with the whole cell biocatalyst at 4 ℃ and 30 °C for 35 days, respectively. However, the purified CarCby lost almost 100% of its activity when incubated at 30 °C for 134 h or 37 °C for 96 h, respectively. Finally, approximately 30 mg/L of carbaryl was hydrolyzed by 200 U of the engineered E. coli cells in 12 h.

Conclusions

Here, a carbaryl hydrolase-containing surface-displayed system was first constructed, and the whole cell biocatalyst displayed better stability and maintained its catalytic activity. This surface-displayed strategy provides a new solution for the cost-efficient bioremediation of carbaryl and could also have the potential to be used to treat other carbamates in environmental bioremediation.

Supplementary information

The online version contains supplementary material available at 10.1186/s12934-022-01821-5.

Pesticide residues in drinking water, their potential risk to human health and removal options

The application of pesticides in agricultural and public health sectors has resulted in substantially contaminated water resources with residues in many countries. Almost no reviews have addressed pesticide residues in drinking water globally; calculated hazard indices for adults, children, and infants; or discussed the potential health risk of pesticides to the human population. The objectives of this article were to summarize advances in research related to pesticide residues in drinking water; conduct health risk assessments by estimating the daily intake of pesticide residues consumed only from drinking water by adults, children, and infants; and summarize options for pesticide removal from water systems. Approximately 113 pesticide residues were found in drinking water samples from 31 countries worldwide. There were 61, 31, and 21 insecticide, herbicide, and fungicide residues, respectively. Four residues were in toxicity class IA, 14 residues were in toxicity class IB, 55 residues were in toxicity class II, 17 residues were in toxicity class III, and 23 residues were in toxicity class IV. The calculated hazard indices (HIs) exceeded the value of one in many cases. The lowest HI value (0.0001) for children was found in Canada, and the highest HI value (30.97) was found in Egypt, suggesting a high potential health risk to adults, children, and infants. The application of advanced oxidation processes (AOPs) showed efficient removal of many pesticide classes. The combination of adsorption followed by biodegradation was shown to be an effective and efficient purification option. In conclusion, the consumption of water contaminated with pesticide residues may pose risks to human health in exposed populations.