Effect of the gradual increase of Na2SO4 on performance and microbial diversity of aerobic granular sludge

Insight into simultaneous urea hydrolysis and total nitrogen removal in textile printing wastewater: Focus on the impact of sodium sulfate salinity

The textile printing industry discharges large volumes of effluent containing high concentrations of urea and nitrogenous compounds. Anoxic-oxic (AO) treatment is a promising method for treating printing wastewater. However, the effect of sodium sulfate (Na2SO4) salinity on the urea hydrolysis and nitrogen removal simultaneously in the AO process has received little attention. In this study, five batch reactors were used to treat synthetic printing wastewater with high urea and nitrogen concentrations. A strategy was applied to increase the Na2SO4 concentration from 0 to 19 g/L in the anoxic stage of each reactor. The effect of Na2SO4 on urea hydrolysis, total nitrogen removal and COD removal, sludge characteristics, and bacterial community structure were investigated. The findings showed that urea hydrolysis increased with increasing Na2SO4 concentration. The main mechanism of urea removal was intracellular hydrolysis, with a urea removal efficiency (URE%) of approximately 98% in all batch reactors. In addition, under the stress of Na2SO4, the total nitrogen and COD removal performances were partially inhibited. The most significant removal performances after AO treatment were observed at 0 g/L Na2SO4, with nitrogen and COD removal efficiencies of 88% and 95%, respectively. When Na2SO4 concentration reached 19 g/L, the sludge settling performance and compactness were enhanced. The extracellular polymeric substance (EPS) components in the sludge were dependent on their ability of removing organics. Bacterial community diversity analysis revealed that the enrichment of the Proteobacteria, Firmicutes, and Gemmatimonadota phyla in the anoxic stages of batch reactors was related to intracellular urea hydrolysis. Bacteriodota and Chloroflexi were responsible for total nitrogen removal in all anoxic and oxic stages. This research will develop the understanding of Na2SO4 salinity impact on simultaneous urea hydrolysis and nitrogen removal during AO treatment process.

Evaluating AGS efficiency in PHA synthesis and extraction integrated with nutrient removal: The impact of COD concentrations

As natural and biodegradable biopolymers, Polyhydroxyalkanoates (PHA) were synthetized by aerobic granules sludge (AGS) in a sequential batch reactor in this study. The effect of different COD concentrations on PHA accumulation and nutrients removal were investigated. At the same time, different pretreatment methods for PHA extraction, including NaClO pretreatment for extracellular polymeric substances (EPS) removal, Na2CO3 pretreatment for EPS recovery, and grinding pretreatment to reduce particle size and augment the surface area available for interaction with the extraction solvent, were compared. The results showed that the PHA yield increased more than 2 times (from 91.1 to 233.3 mgPHA/gCDW (cell dry weight)) when COD concentration increased from 800 to 1600 mg/L. Polyhydroxybutyrate (PHB) and polyhydroxyvalerate (PHV) both accounted for half of the total, while PHB fraction rose to 71% when COD concentration went up to 1600 mg/L. The PHB can be consumed 3 times faster than PHV. High COD concentration (1600 mg/L) adversely impacted the structure stability of AGS and the phosphorus removal efficiency, while the system consistently exhibited robust nitrogen removal capabilities, with ammonium and TN removal efficiencies exceeding >90%. The dominant bacteria shifted from Flavobacterium to Halomona and Hydrogenophaga as the COD concentration increased. In terms of PHA extraction, Na2CO3 pretreatment, which was used for EPS recovery, had the best PHA recovery with nearly 100% purity and EPS removal efficiency compared with NaClO and grinding pretreatments.

Examining the impacts of salt specificity on freshwater microbial community and functional potential following salinization

The degradation of freshwater systems by salt pollution is a threat to global freshwater resources. Salinization is commonly identified by increased specific conductance (conductivity), a proxy for salt concentrations. However, conductivity fails to account for the diversity of salts entering freshwaters and the potential implications this has on microbial communities and functions. We tested 4 types of salt pollution-MgCl2, MgSO4, NaCl, and Na2SO4-on bacterial taxonomic and functional α-, β-diversity of communities originating from streams in two distinct localities (Nebraska [NE] and Ohio [OH], USA). Community responses depended on the site of origin, with NE and OH exhibiting more pronounced decreases in community diversity in response to Na2SO4 and MgCl2 than other salt amendments. A closer examination of taxonomic and functional diversity metrics suggests that core features of communities are more resistant to induced salt stress and that marginal features at both a population and functional level are more likely to exhibit significant structural shifts based on salt specificity. The lack of uniformity in community response highlights the need to consider the compositional complexities of salinization to accurately identify the ecological consequences of instances of salt pollution.

Pollutants removal and connections among sludge properties, metabolism potential and microbial characteristics in aerobic granular sequencing batch reactor for petrochemical wastewater treatment

Petrochemical wastewater contains inhibitory compounds such as aromatics that are toxic to microorganisms during biological treatment. The compact and layered structure and the high amount of extracellular polymeric substances (EPS) in aerobic granular sludge (AGS) can contribute to protecting microorganisms from the harsh environment. This study evaluated the changes in the granule properties, pollutants removal, microbial metabolic potential and molecular microbial characteristics of the AGS process for petrochemical wastewater treatment. Granules treating petrochemical wastewater had a higher SVI30/SVI5 value (0.94) than that treating synthetic wastewater. An increase in bioactivity and EPS secretion with higher bio-polymer composition, specifically the functional groups such as hydroxyl, alkoxy and amino in protein, was observed, which promoted biomass aggregation. The granules also had more than 2-fold higher specific oxygen utilization rate. The AGS-SBR process obtained an average COD removal of 93% during petrochemical wastewater treatment and an effluent bCOD of below 1 mg L-1. No obvious inhibition of nitrification and denitrification activity was observed in the processes attributed to the layered structure of AGS. The average effluent NH4+-N of 5.0 mg L-1 was obtained and TN removal efficiencies of over 80.0% was achieved. Molecular microbial analysis showed that abundant functional genera Stenotrophomonas and Pseudoxanthomonas contributed to the degradation of aromatics and other petroleum organic pollutants. They were enriched with the variation of group behavior while metabolisms of amino acids and carboxylic acids by the relevant functional genera (e.g., Cytophagia) were significantly inhibited. The enrichment of Flavobacterium and Thermomonas promoted nitrification and denitrification, respectively. This research revealed the rapid start-up, enhanced granule structural strength, high inhibition resistance and considerable performance of AGS-SBR for petrochemical wastewater treatment.

Responses of halophilic microbial communities to changes in salt composition: Comparison between autotrophic nitrification and heterotrophic ammonia assimilation biosystems

The concentration and proportion of chlorine (Cl-) and sulfate ions (SO42-) in actual high salinity wastewater exhibit significant fluctuations due to their diverse sources. This study compared the response of halophilic autotrophic nitrification (AN) and heterotrophic ammonia assimilation (HAA) sludges to changes in salt composition. The results demonstrated that both the AN and HAA systems maintained high ammonia removal efficiency even when exposed to mixed salt ions or pure sulfate conditions. Increasing the concentration of SO42- resulted in an increase in extracellular polymeric substances content, sludge settleability, sludge hydrophobicity, and the relative abundance of Nitrosomonas in the AN system (from 2.3% to 10.4%). The dominant heterotrophic bacteria in the HAA system underwent turnover in response to changes in salt composition conditions. The robustness and the cooperation between microorganisms of the HAA system surpassed those of the AN system. This study provides scientific foundation for treating multi-ion high salinity wastewater.

Granule formation mechanism, key influencing factors, and resource recycling in aerobic granular sludge (AGS) wastewater treatment: A review

The high-efficiency and additionally economic benefits generated from aerobic granular sludge (AGS) wastewater treatment have led to its increasing popularity among academics and industrial players. The AGS process can recycle high value-added biomaterials including extracellular polymeric substances (EPS), sodium alginate-like external polymer (ALE), polyhydroxyfatty acid (PHA), and phosphorus (P), etc., which can serve various fields including agriculture, construction, and chemical while removing pollutants from wastewaters. The effects of various key operation parameters on formation and structural stability of AGS are comprehensively summarized. The degradable metabolism of typical pollutants and corresponding microbial diversity and succession in the AGS wastewater treatment system are also discussed, especially with a focus on emerging contaminants removal. In addition, recent attempts for potentially effective production of high value-added biomaterials from AGS are proposed, particularly concerning improving the yield, quality, and application of these biomaterials. This review aims to provide a reference for in-depth research on the AGS process, suggesting a new alternative for wastewater treatment recycling.

Aerobic granular sludge formation and stability in enhanced biological phosphorus removal system under antibiotics pressure: Performance, granulation mechanism, and microbial successions

Wastewater containing antibiotics can pose a significant threat to biological wastewater treatment processes. This study investigated the establishment and stable operation of enhanced biological phosphorus removal (EBPR) by aerobic granular sludge (AGS) under mixed stress conditions induced by tetracycline (TC), sulfamethoxazole (SMX), ofloxacin (OFL), and roxithromycin (ROX). The results show that the AGS system was efficient in removing TP (98.0%), COD (96.1%), and NH₄⁺-N (99.6%). The average removal efficiencies of the four antibiotics were 79.17% (TC), 70.86% (SMX), 25.73% (OFL), and 88.93% (ROX), respectively. The microorganisms in the AGS system secreted more polysaccharides, which contributed to the reactor's tolerance to antibiotics and facilitated granulation by enhancing the production of protein, particularly loosely bound protein. Illumina MiSeq sequencing revealed that putative phosphate accumulating organisms (PAOs)-related genera (Pseudomonas and Flavobacterium) were enormously beneficial to the mature AGS for TP removal. Based on the analysis of extracellular polymeric substances, extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory, and microbial community, a three-stage granulation mechanism was proposed including adaption to the stress environment, formation of early aggregates and maturation of PAOs enriched microbial granules. Overall, the study demonstrated the stability of EBPR-AGS under mixed antibiotics pressure, providing insight into the granulation mechanism and the potential use of AGS for wastewater treatment containing antibiotics.

Performance and Bacterial Characteristics of Aerobic Granular Sludge in Treatment of Ultra-Hypersaline Mustard Tuber Wastewater

Mustard tuber wastewater (MTW) is an ultra-hypersaline high-strength acid organic wastewater. Aerobic granular sludge (AGS) has been demonstrated to have high tolerance to high organic loading rate (OLR), high salinity, and broad pH ranges. However, most studies were conducted under single stress, and the performance of AGS under multiple stresses (high salinity, high OLR, and low pH) was still unclear. Herein, mature AGS was used to try to treat the real MTW at 9% salinity, pH of 4.1–6.7, and OLR of 1.8–7.2 kg COD/m3·d. The OLR was increased, and the results showed that the upper OLR boundary of AGS was 5.4 kg COD/m3·d (pH of 4.2) with relatively compact structure and high removal of TOC (~93.1%), NH4+-N (~88.2%), and TP (~50.6%). Under 7.2 kg COD/m3·d (pH of 4.1), most of the AGS was fragmented, primarily due to the multiple stresses. 16S rRNA sequencing indicated that Halomonas dominated the reactor during the whole process with the presence of unclassified-f-Flavobacteriaceae, Aequorivita, Paracoccus, Bradymonas, and Cryomorpha, which played key roles in the removal of TOC, nitrogen, and phosphorus. This study investigated the performance of AGS under multiple stresses, and also brought a new route for highly-efficient simultaneous nitrification–denitrifying phosphorus removal of real MTW.

Uncover the secret of the stability and interfacial Gibbs free energy of aerobic granular sludge

Interfacial Gibbs free energy (IGFE) as a thermodynamic indicator characterize the stability of the natural system. For aerobic granular sludge (AGS), how IGFE determines the stability of sludge remains to be determined. The Gibbs free energy change at the AGS-water interface (ΔG_sw^a) and AGS interfaces (ΔG_s^c) were selected as the main interfacial thermodynamic factors. Results indicated that the stable AGS was guaranteed with ΔG_s^c at the range of -31 to - 46 J m^-2. Pearson correlation coefficients between ΔG_sw^a/ ΔG_s^c and relative hydrophobicity, water content, SVI₃₀, integrity coefficient were -0.9, 0.8, 0.85, and 0.84, which illustrated that the IGFE could be a more comprehensive thermodynamic indicator. Microbial community and EPS analysis verified the importance of denitrifiers, Amide III, protein-like substances for AGS stability. This work offers a new insight into the development of AGS stability based on IGFE.

Response difference of simultaneous sulfide and nitrite removal process to different cooling modes

The effects of various cooling modes (sudden cooling (25℃→10℃) and step cooling (25℃→20℃→15℃→10℃)) on the performance of simultaneous sulfide and nitrite removal process were reported. Regardless of cooling mode adopted, the process maintained good sulfide removal performance, and removal percentage was 100.00%. Considering nitrite removal percentage, the process was more sensitive to step cooling mode (k = 0.06707) in comparison to sudden cooling mode (k = 0.02760). Lowering temperature promoted the transformation from sulfate to elemental sulfur, and it was easier to increase the proportion of elemental sulfur (79.90%) by means of step cooling. The sulfide oxidation rate and nitrite reduction rate were 0.01540 mg /(L∙min) and 0.00354 mg /(L∙min), respectively, in the sudden cooling mode, and 0.01168 mg /(L∙min) and 0.00138 mg /(L∙min), respectively, in the step cooling mode. Low temperature reduced the diversity of microbial community, and Sulfurovum was still a dominant bacterial member in both cooling modes.

Solid-phase denitrification in high salinity and low-temperature wastewater treatment

Nitrogen removal from wastewater is often deteriorated under high salinity and low temperature. Solid-phase denitrification (SPD) might improve total nitrogen removal efficiency (TNRE) by stably supplying carbon resources under adverse conditions. In this study, an SPD biofilm reactor was successfully established by inoculating halophilic sludge and filling poly (butanediol succinate) (PBS) granules, and achieved over 96% TNRE at low temperature. More extracellular polysaccharides were produced at low temperature. Microbial network analysis evidenced dominant heterotrophic denitrifiers (Marinicella, Fusibacter, Saccharicrinis and Vitellibacter) at 25 °C were replaced by genera Melioribacter, Marinobacter, Desulfatitalea and Thiomicrospira at 15 °C. At low temperature, genes nirS and narG might be mainly responsible for denitrification. Fluorescence spectrum coupled with fluorescence regional integration and parallel factor analysis revealed low temperature increased the proportion of proteins of soluble microbial products. This study provides guidance for the practical application of SPD in the treatment of high salinity and low-temperature wastewater.