How anammox responds to the emerging contaminants: Status and mechanisms

Potential electron acceptors for ammonium oxidation in wastewater treatment system under anoxic condition: A review

Anaerobic ammonium oxidation has been considered as an environmental-friendly and energy-efficient biological nitrogen removal (BNR) technology. Recently, new reaction pathway for ammonium oxidation under anaerobic condition had been discovered. In addition to nitrite, iron trivalent, sulfate, manganese and electrons from electrode might be potential electron acceptors for ammonium oxidation, which can be coupled to traditional BNR process for wastewater treatment. In this paper, the pathway and mechanism for ammonium oxidation with various electron acceptors under anaerobic condition is studied comprehensively, and the research progress of potentially functional microbes is summarized. The potential application of various electron acceptors for ammonium oxidation in wastewater is addressed, and the N2O emission during nitrogen removal is also discussed, which was important greenhouse gas for global climate change. The problems remained unclear for ammonium oxidation by multi-electron acceptors and potential interactions are also discussed in this review.

Recovery strategies and mechanisms of anammox reaction following inhibition by environmental factors: A review

Anaerobic ammonium oxidation (anammox) is a promising biological method for treating nitrogen-rich, low-carbon wastewater. However, the application of anammox technology in actual engineering is easily limited by environmental factors. Considerable progress has been investigated in recent years in anammox restoration strategies, significantly addressing the challenge of poor reaction performance following inhibition. This review systematically outlines the strategies employed to recover anammox performance following inhibition by conventional environmental factors and emerging pollutants. Additionally, comprehensive summaries of strategies aimed at promoting anammox activity and enhancing nitrogen removal performance provide valuable insights into the current research landscape in this field. The review contributes to a comprehensive understanding of restoration strategies of anammox-based technologies.

Effects of microplastics on the properties of different types of sewage sludge and strategies to overcome the inhibition: A review

Microplastics have been identified as an emerging pollutant. When microplastics enter wastewater treatment plants, the plant traps most of the microplastics in the sludge during sewage treatment. Therefore, the effects of microplastics on sludge removal performance, and on the physical and chemical properties and microbial communities in sludge, have attracted extensive attention. This review mainly describes the presence of microplastics in wastewater treatment plants, and the effects of microplastics on the decontamination efficiency and physicochemical properties of activated sludge, aerobic granular sludge, anaerobic granular sludge and anaerobic ammonium oxidation sludge. Further, the review summarizes the effects of microplastics on microbial activity and microbial community dynamics in various sludges in terms of type, concentration, and contact time. The mechanisms used to strengthen the reduction of microplastics, such as biochar and hydrochar, are also discussed. This review summarizes the mechanism by which microplastics influence the performance of different types of sludge, and proposes effective strategies to mitigate the inhibitive effect of microplastics on sludge and discusses removal technologies of microplastics in sewage. Biochar and hydrochar are one of the effective measures to overcome the inhibition of microplastics on sludge. Meanwhile, constructed wetland may be one of the important choice for the future removal of microplastics from sewage. The goal is to provide theoretical support and insights for ensuring the stable operation of wastewater treatment plants and reducing the impact of microplastics on the environment.

Feasibility of anaerobic ammonium oxidation process for treatment of pretreated printed circuit board wastewater

The treatment of pretreated printed circuit board (PCB) wastewater by anaerobic ammonium oxidation (anammox) process has been rarely reported. This study sought to investigate the performance of the anammox process during various phases of pretreated PCB wastewater treatment. The nitrogen removal efficiency (NRE) reached 90 ± 10% at a Cu2+ concentration of 2.5 mg·L-1, but declined to 22 ± 11% as the Cu2+ level increased to 10.3  mg·L-1. During phase III, there was a 38% increase in the relative abundance of Candidatus Kuenenia compared to phase I. By adjusting the substrate concentration and introducing synthetic wastewater into the reactor, the anammox performance was nearly restored to that of phase I. These findings underscore the potential of the anammox process for treating pretreated PCB wastewater and expanding its practical applications to industrial wastewater treatment.

Insight into response characteristics and inhibition mechanisms of anammox granular sludge to polyethylene terephthalate microplastics exposure

Currently, in-depth understanding of response characteristics and mechanisms of anammox process under microplastics (MPs) stress remains quite limited. This study investigated the influence of 0.1-1.0 g/L polyethylene terephthalate (PET) on anammox granular sludge (AnGS). Compared with the control, 0.1-0.2 g/L PET did not significantly affect the anammox efficiency, while the anammox activity decreased by 16.2% at 1.0 g/L PET. Integrity coefficient and transmission electron microscopy analysis demonstrated that the strength and structural stability of the AnGS became weaken following exposure to 1.0 g/L PET. With the PET increasing, the abundance of anammox genera and genes related to energy metabolism and cofactors and vitamins metabolism decreased. The reactive oxygen species generated in the interaction between microbial cells and PET resulting in cellular oxidative stress was responsible for inhibiting anammox. These findings give novel insights into the anammox behavior in biological nitrogen removal systems treating PET-loaded nitrogenous wastewater.

Performance changes in the anammox process under the stress of rare-earth element Ce(III) and the evolution of microbial community and functional genes

The high Ce(III) content in ionic rare-earth tailings wastewater has hindered the application of anammox process in this field. Here, the effect of Ce(III) on the performance of anammox processes was investigated, and the evolution of microbial communities and functional genes was explored using metagenomic sequencing. The results showed that the reactor nitrogen removal rate decreased when the Ce(III) concentration reached 25 mg/L, although ammonia nitrogen removal (92.31%) and nitrogen removal efficiency (81.33%) remained at a high level; however, both showed a significant decreasing trend. The relative abundance of anammox bacteria increased continuously from P1-P5, reaching 48.81%, whereas the relative abundance of Candidatus jettenia reached 33.71% at P5, which surpassed that of Candidatus brocadia as the most abundant anammox bacteria, and further analysis of functional genes and metabolic pathways revealed that Candidatus brocadia was richer in biochemical metabolic genes, whereas Candidatus jettenia had richer efflux genes.

Insights into heavy metals shock on anammox systems: Cell structure-based mechanisms and new challenges

Anaerobic ammonium oxidation (anammox) as a low-carbon and energy-saving technology, has shown unique advantages in the treatment of high ammonia wastewater. However, wastewater usually contains complex heavy metals (HMs), which pose a potential risk to the stable operation of the anammox system. This review systematically re-evaluates the HMs toxicity level from the inhibition effects and the inhibition recovery process, which can provide a new reference for engineering. From the perspective of anammox cell structure (extracellular, anammoxosome membrane, anammoxosome), the mechanism of HMs effects on cellular substances and metabolism is expounded. Furthermore, the challenges and research gaps for HMs inhibition in anammox research are also discussed. The clarification of material flow, energy flow and community succession under HMs shock will help further reveal the inhibition mechanism. The development of new recovery strategies such as bio-accelerators and bio-augmentation is conductive to breaking through the engineered limitations of HMs on anammox. This review provides a new perspective on the recognition of toxicity and mechanism of HMs in the anammox process, as well as the promotion of engineering applicability.

A review of anammox metabolic response to environmental factors: Characteristics and mechanisms

Anaerobic ammonium oxidation (anammox) is a promising low carbon and economic biological nitrogen removal technology. Considering the anammox technology has been easily restricted by environmental factors in practical engineering applications, therefore, it is necessary to understand the metabolic response characteristics of anammox bacteria to different environmental factors, and then guide the application of the anammox process. This review presented the latest advances of the research progress of the effects of different environmental factors on the metabolic pathway of anammox bacteria. The effects as well as mechanisms of conventional environmental factors and emerging pollutants on the anammox metabolic processes were summarized. Also, the role of quorum sensing (QS) mediating the bacteria growth, gene expression and other metabolic process in the anammox system were also reviewed. Finally, interaction and cross-feeding mechanisms of microbial communities in the anammox system were discussed. This review systematically summarized the variations of metabolic mechanism response to the external environment and cross-feeding interactions in the anammox process, which would provide an in-depth understanding for the anammox metabolic process and a comprehensive guidance for future anammox-related metabolic studies and engineering applications.

The optimum particle size of anaerobic ammonia oxidation granular sludge under different substrate concentrations

The nitrogen removal performance of anaerobic ammonia oxidation granular sludge (AnGS) varies widely among particle sizes. In this paper, the nitrogen removal performance, extracellular polymeric substances (EPS) secretion level and microbial community of AnGS with different particle sizes were investigated to select the optimal particle size for different substrate concentrations. The results showed that the optimal particle size migrated from 0.6-1.6 mm to 1.6-2.5 mm and then to 2.5-3.2 mm as the substrate concentration increased. When the influent concentration of NH₄⁺-N was 110 mg/L, granular sludge with particle size of 1.6-2.5 mm showed excellent nitrogen removal performance with the highest EPS secretion, while the highest EPS secretion gradually migrated to smaller particles as the substrate concentration decreased. The nitrogen removal performance of AnGS with different particle sizes depends on different proportions of anaerobic ammonium-oxidizing (anammox) bacteria (Candidates_Jettenia, Candidates_Kuenenia, Candidatus_Brocadia), heterotrophic nitrification aerobic denitrifying bacteria (Acinetobacter) and denitrifying bacteria (Denitratisoma). The optimum particle size range for AnGS has been clarified for different influent nitrogen concentrations, which can provide some new understanding for the application of anammox reactors.

Acute stress of the typical disinfectant glutaraldehyde-didecyldimethylammonium bromide (GD) on sludge microecology in livestock wastewater treatment plants: Effect and its mechanisms

Glutaraldehyde and didecyldimethylammonium bromide (GD) is a disinfectant widely used to prevent African swine fever (ASF) in livestock farms. However, the effect of residual GD on the activated sludge microbial ecology of receiving wastewater treatment plants (WWTPs) remains largely unknown. In this study, seven simulated systems were established to research the effects of GD on WWTPs and reveal the underlying mechanisms of microecological responses to GD at different concentrations. Both the nitrogen and carbon removal rates decreased with increasing GD concentrations, and nitrogen metabolism was inhibited more obviously, but the inhibition weakened with increasing stress duration. Microorganisms activated their SoxRS systems to promote ATP synthesis and electron transfer to support the hydrolysis and efflux of GD by producing a small number of ROS when exposed to GD at less than 1 mg/L. The overproduction of ROS led to a decrease of antioxidant and nitrogen removal enzyme activities, and upregulation of the porin gene increased the risk of GD entering the intracellular space upon exposure to GD at concentrations higher than 1 mg/L. Some denitrifiers survived via resistance and their basic capabilities of sugar metabolism and nitrogen assimilation. Notably, low concentrations of disinfectants could promote vertical and horizontal transfer of multiple resistance genes, especially aminoglycosides, among microorganisms, which might increase not only the adaptation capability of denitrifiers but also the risk to ecological systems. Therefore, the risks of disinfectants targeting ASF on ecology and health as well as the effects of disinfectant residuals from the COVID-19 epidemic should receive more attention.

Short-term responses of the anammox process to Ni(II): nitrogen removal, mechanisms and inhibition recovery

Anaerobic ammonia oxidizing (anammox) has already been recognized as an innovative and economical nitrogen removal technology. However, the effect of heavy metals on anammox bacteria in aquatic ecosystem remains largely unknown. Ni(II) is a common kind of heavy metals detected in industrial wastewater and municipal sewage treatment plants. Hence, the responses of the anammox process to Ni(II) were studied here. The results showed that anammox was the dominant reaction with Ni(II) concentrations no more than 25 mg/L. 1 mg/L of Ni(II) addition promoted nitrogen removal by anammox. The higher the Ni(II) concentrations and longer exposure time, the more inhibition for anammox bacteria was gotten. The IC₅₀ of Ni(II) to anammox was determined as 83.86 mg/L by an exponential regression equation. The inhibition of Ni(II) on anammox activity was mainly attributed to intracellular accumulation Ni(II) inhibition to HDH activity. Two times increase of IC₅₀ after 4 times circles of domestication suggests multiple intermittent domestication can increase the tolerance of anammox bacteria to Ni(II). EDTA washing can eliminate the inhibition of anammox activity by Ni(II) with Ni(II) addition no more than 25 mg/L.

Wastewater treatment and emerging contaminants: Bibliometric analysis

In recent years, emerging contaminants have been found in the wastewater, surface water, and even drinking water, which should be treated to ensure the safety of our living environment. In this study, we provide a comprehensive summary of wastewater treatment and emerging contaminants research from 1998 to 2021 by using the bibliometric analysis. This study is conducted based on the Web of Science Core Collection Database. The bibliometix R-package, VOSviewer and CiteSpace software are used for bibliometric analysis and science mapping. A dataset of 10, 605 publications has been retrieved. The analysis results show that China has produced the most publications. China and the United States have the closest cooperation. Analysis of the most cited papers reveals that the purification or removal techniques such as ozonation or membrane filtration can effectively remove pharmaceutical compounds from the water environment. We also found that the efficient detection of emerging contaminants and the optimization of removal methods are current challenges. Finally, future research directions are discussed.

Impact of engineered nanoparticles on the fate of antibiotic resistance genes in wastewater and receiving environments: A comprehensive review

Nanoparticles (NPs) and antibiotic resistance elements are ubiquitous in wastewater and consequently, in receiving environments. Sub-lethal levels of engineered NPs potentially result in a selective pressure on antibiotic resistance gene (ARG) propagation in wastewater treatment plants. Conversely, emergent NPs are being designed to naturally attenuate ARGs based on special physical and electrochemical properties, which could alleviate dissemination of ARGs to the environment. The complex interactions between NPs and antibiotic resistance elements have heightened interest in elucidating the potential positive and negative implications. This review focuses on the properties of NPs and ARGs and how their interactions could increase or decrease antibiotic resistance at wastewater treatment plants and in receiving environments. Further, the potential for sub-lethal level NPs to facilitate horizontal gene transfer of ARGs and increase mutagenesis rates, which adds a layer of complexity to combatting antibiotic resistance associated with wastewater management, is discussed. Notably, the literature revealed that sub-lethal exposure of engineered NPs may facilitate conjugative transfer of ARGs by increasing cell membrane permeability. The enhanced permeability is a result of direct damage via NP attachment and indirect damage by generating reactive oxygen species (ROS) and causing genetic changes relevant to conjugation. Finally, current knowledge gaps and future research directions (e.g., deciphering the fate of NPs in the environment and examining the long-term cytotoxicity of NPs) are identified for this emerging field.

Advances in Studies on Microbiota Involved in Nitrogen Removal Processes and Their Applications in Wastewater Treatment

The discharge of excess nitrogenous pollutants in rivers or other water bodies often leads to serious ecological problems and results in the collapse of aquatic ecosystems. Nitrogenous pollutants are often derived from the inefficient treatment of industrial wastewater. The biological treatment of industrial wastewater for the removal of nitrogen pollution is a green and efficient strategy. In the initial stage of the nitrogen removal process, the nitrogenous pollutants are converted to ammonia. Traditionally, nitrification and denitrification processes have been used for nitrogen removal in industrial wastewater; while currently, more efficient processes, such as simultaneous nitrification-denitrification, partial nitrification-anammox, and partial denitrification-anammox processes, are used. The microorganisms participating in nitrogen pollutant removal processes are diverse, but information about them is limited. In this review, we summarize the microbiota participating in nitrogen removal processes, their pathways, and associated functional genes. We have also discussed the design of efficient industrial wastewater treatment processes for the removal of nitrogenous pollutants and the application of microbiome engineering technology and synthetic biology strategies in the modulation of the nitrogen removal process. This review thus provides insights that would help in improving the efficiency of nitrogen pollutant removal from industrial wastewater.