Polymer-based immobilized Fe2O3-TiO2/PVP catalyst preparation method and the degradation of triclosan in treated greywater effluent by solar photocatalysis

Analysis of heavy metal pollution sources caused by sulfide minerals in tunnel waste under photocatalytic oxidation conditions

The rapid expansion of global transportation infrastructure has significantly increased tunnel construction in mountainous regions, generating substantial amounts of sulfide-rich excavation waste. Current disposal practices relying on open-air storage pose critical environmental risks through land occupation and potential heavy metal pollution, while the intrinsic pollutant release mechanisms from sulfide mineral weathering remain insufficiently investigated. This study elucidates a novel pollution pathway through photocatalytic oxidation-triggered heavy metal liberation in tunnel waste. Conducted comprehensive mineralogical characterization of sulfide-bearing tunnel residues and systematically examined heavy metal migration patterns under controlled photooxidative conditions (variable illumination duration, temperature (25-45 °C), moisture content (20-60%), and aeration status). Parallel experiments monitored pH evolution and heavy metal release kinetics, particularly focusing on Cd, As, Cr, Pb, and Mn. Results revealed the presence of photochemically active Fe- and Ti-bearing phases in sulfide matrices that drive acid generation through solar-induced sulfite oxidation. This catalytic process established strongly acidic conditions (pH 2.0 ± 0.3) under optimal parameters: 35 °C, 40% moisture content, and 48-h photoexposure with aeration. The resultant acidification promoted mineral dissolution, yielding maximum leachate concentrations of 0.09 mg/L Cd, 1.8 μg/L As, 0.05 mg/L Cr, 0.36 mg/L Pb, and 8.54 mg/L Mn, representing 3-eightfold increases compared to dark controls. This work provides the first mechanistic evidence of photocatalysis-mediated acid mine drainage formation in tunnel waste systems, challenging conventional geochemical weathering paradigms. The findings establish a theoretical framework for predicting heavy metal pollution risks and inform remediation strategies through photochemical parameter control, ultimately supporting sustainable management of tunnel excavation byproducts.

Efficient synthesis of 3D ZnO nanostructures on ITO surfaces for enhanced photoelectrochemical water splitting

New photoactive materials with uniform and well-defined morphologies were developed for efficient and sustainable photoelectrochemical (PEC) water splitting and hydrogen production. The investigation is focused on hydrothermal deposition of zinc oxide (ZnO) onto indium tin oxide (ITO) conductive surfaces and optimization of hydrothermal temperature for growing uniform sized 3D ZnO morphologies. Fine-tuning of hydrothermal temperature enhanced the scalability, efficiency, and performance of ZnO-decorated ITO electrodes used in PEC water splitting. Under UV light irradiation and using eco-friendly low-cost hydrothermal process in the presence of stable ZnO offered uniform 3D ZnO, which exhibited a high photocurrent of 0.6 mA/cm2 having stability up to 5 h under light-on and light-off conditions. The impact of hydrothermal temperature on the morphological properties of the deposited ZnO and its subsequent performance in PEC water splitting was investigated. The work contributes to advancement of scalable and efficient fabrication technique for developing energy converting photoactive materials.

Biopolymer templated strategized greener protocols for fabrication of ZnO nanostructures and their application in photocatalytic technology for phasing out priority pollutants

Zinc oxide (ZnO) nanostructures have been successfully synthesized via template-assisted and template-free route using three different synthetic methods, i.e., sonochemical, mechanochemical, and hydrothermal. Biopolymer xanthan gum (XG) served as sacrificial template for ZnO synthesis as provided the surface for the growth of nanostructures in a controlled manner. The employment of multifarious synthetic techniques resulted in fabrication of ZnO nanoparticles with diverse morphologies such as needle shaped, hexagonal, and spherical particles. Further, the template-assisted protocols generated thermally stable highly crystalline nanostructures along with high surface area, larger pore size, and low band gap energies in contrast to template-free protocol. The structural and other physicochemical studies were manifested by XRD, N₂ adsorption desorption, FESEM, TGA, and UV-Vis spectral analysis. The template-assisted ZnO nanostructures were explored as a potential photocatalyst for the catalytic degradation of emerging pollutants, i.e., triclosan (TCS) and imidacloprid (IMD) under the exposure of UV light. The products formed during the photocatalytic reaction were monitored by UV-Vis spectroscopy and HPLC. The results obtained revealed the high catalytic efficiency of ZnO synthesized via template-assisted sonochemical method for TCS (99.60%) and IMD (96.09%) which is attributed to the high surface area and lower band gap energy of the catalyst. The high catalytic potential of the sonochemically synthesized ZnO also substantiated from the kinetic data as high-rate constant was obtained. Thus, the template-assisted protocols developed led to preparation of nanostructures having tailored properties for efficient photocatalysis and can rapidly degrade selected emerging contaminants such as personal care products and organophosphate pesticides. Hence, environment-friendly synthesized photocatalyst can be appropriately employed to wastewater treatment contaminated with emerging pollutants.

Synthesis and application of titanium dioxide photocatalysis for energy, decontamination and viral disinfection: a review

Global pollution is calling for advanced methods to remove contaminants from water and wastewater, such as TiO₂-assisted photocatalysis.  The environmental applications of titanium dioxide have started after the initial TiO₂ application for water splitting by Fujishima and Honda in 1972. TiO₂ is now used for self-cleaning surfaces, air and water purification systems, microbial inactivation and selective organic conversion. The synthesis of titanium dioxide nanomaterials with high photocatalytic activity is actually a major challenge. Here we review titanium dioxide photocatalysis with focus on mechanims, synthesis, and applications. Synthetic methods include sol-gel, sonochemical, microwave, oxidation, deposition, hydro/solvothermal, and biological techniques. Applications comprise the production of energy, petroleum recovery, and the removal of microplastics, pharmaceuticals, metals, dyes, pesticides, and of viruses such as the severe acute respiratory syndrome coronavirus 2.

Extraction of iron from laterite soil and green synthesis of laterite nano iron catalyst (GLaNICs) for its application as Fenton's catalyst in the degradation of triclosan

Laterite based nano iron particles were synthesized using natural laterite extract as a precursor and Psidium guajava plant extract for its application as Fenton's catalyst in the degradation of triclosan. Chemical digestion method was used for the extraction of iron from laterite soil. Synthesized nano iron catalyst was characterized using SEM-EDS, XRD and FTIR and evaluated for its catalytic application in the Fenton's oxidation of triclosan. Maximum triclosan degradation of 69.5% was observed with nano iron catalyst dosage of 0.1 g/L and hydrogen peroxide dosage of 200 mg/L at acidic pH of 3. Hydrogen peroxide influence on the process was observed with Fenton's oxidation. Role of iron in the process has been accessed by control experiment with no nano catalyst addition in which degradation is considerably low. Fenton's oxidation was compared with conventional Fenton's oxidation driven by a green nano iron catalyst. Study claims the usage of natural laterite iron as a replacement for commercial iron in Fenton's degradation of triclosan. Regeneration and reusability studies on catalyst were studied and synthesized catalyst was observed to be reusable in three consecutive cycles. Degradation of triclosan in Fenton's oxidation follows pseudo-second order reaction with linear fit.

Recent insights into greywater treatment: a comprehensive review on characteristics, treatment technologies, and pollutant removal mechanisms

With the rapid socio-economic and industrial development, the problem of water shortage is becoming increasingly serious. Seeking alternative water sources to reduce the need for freshwater resources is an increasing concern. Household greywater production is high and accounts for about 50-80% of domestic wastewater. In recent years, the in situ treatment and reuse of greywater have received widespread attention. Treated greywater can be used for non-potable purposes such as toilet flushing and irrigation, which can greatly reduce the pressure of freshwater resource shortage. This paper reviews the sources and characteristics of greywater and analyzes its quantity and quality. In addition, this paper outlines and summarizes various greywater treatment technologies commonly used, including physical, biological, and chemical treatment technologies, as well as combination technologies. Understanding the mechanisms of contaminant removal is essential for effective greywater treatment. While discussing different treatment technologies, we focus on the removal mechanisms of pollutants from greywater, including organics, nutrients, surfactants, and emerging contaminants. Finally, future perspectives on greywater management and reuse are presented. Through a comprehensive review, we expect that this review will help the reader to better understand the characteristics of greywater and to more rationally select the appropriate treatment technology based on the removal mechanism of pollutants.

Novel assembly of BiVO4@N-Biochar nanocomposite for efficient detoxification of triclosan

The wide spread of antibacterial and antifungal agents demands in growing multifunctional materials to completely eliminate these organic contaminants in water. BiVO₄ (Bismuth vanadate) is a superior catalyst under visible light but suffers with high photoelectron-hole pair recombination rate and poor adsorption capacity which limits its efficiency. Addition of N-doped Biochar (N-Biochar) to BiVO₄ with large specific surface area and high conductivity are anticipated to overcome the problem and promote the catalytic performance. Thus, the present study developed a simple hydrothermal method to prepare BiVO₄@N-Biochar catalyst for efficient detoxification of Triclosan (TCS). The morphological analysis results suggested that BiVO₄ particles were evenly distributed on carbon surface amongst the N-Biochar matrix. Within 60 min of visible light irradiation, nearly 94.6% TCS degradation efficiency was attained by BiVO₄@N-Biochar (k = 0.02154 min^-1) while only 56.7% was attained with pure BiVO₄ (k = 0.00637 min^-1). In addition, LC-MS/MS technique was utilized to determine the TCS degradation products generation in the photodegradation process and pathway was proposed. Furthermore, the E. coli (Escherichia coli) colony forming unit assay was used to determine the biotoxicity of the degradation products in which 72.3 ± 2.6% of detoxification efficiency was achieved and suggested a substantial reduction in biotoxicity during the photodegradation.

Recent Advances in Endocrine Disrupting Compounds Degradation through Metal Oxide-Based Nanomaterials

Endocrine Disrupting Compounds (EDCs) comprise a class of natural or synthetic molecules and groups of substances which are considered as emerging contaminants due to their toxicity and danger for the ecosystems, including human health. Nowadays, the presence of EDCs in water and wastewater has become a global problem, which is challenging the scientific community to address the development and application of effective strategies for their removal from the environment. Particularly, catalytic and photocatalytic degradation processes employing nanostructured materials based on metal oxides, mainly acting through the generation of reactive oxygen species, are widely explored to eradicate EDCs from water. In this review, we report the recent advances described by the major publications in recent years and focused on the degradation processes of several classes of EDCs, such as plastic components and additives, agricultural chemicals, pharmaceuticals, and personal care products, which were realized by using novel metal oxide-based nanomaterials. A variety of doped, hybrid, composite and heterostructured semiconductors were reported, whose performances are influenced by their chemical, structural as well as morphological features. Along with photocatalysis, alternative heterogeneous advanced oxidation processes are in development, and their combination may be a promising way toward industrial scale application.