Experimental investigation on electromagnetic induction thermal desorption for remediation of petroleum hydrocarbons contaminated soil

Environmental factors influencing the soil-air partitioning of semi-volatile petroleum hydrocarbons: Laboratory measurements and optimization model

The soil-air partition coefficient (KSA) values are commonly utilized to examine the fate of organic contaminants in soils; however, their measurement has been lacking for semi-volatile petroleum hydrocarbons within soil contaminated by crude oil. This research utilized a solid-phase fugacity meter to determine the KSA values of n-alkanes and polycyclic aromatic hydrocarbons (PAHs) under crucial environmental conditions. The results showed a notable increase in KSA values with the extent of crude oil contamination in soil. Specifically, in the 3 % crude oil treatment, the KSA values for n-alkanes and PAHs increased by 1.16 and 0.66 times, respectively, compared to the 1 % crude oil treatment. However, the KSA values decreased with changes in temperature, water content, and particle size within the specified experimental range. Among these factors, temperature played a significant role. The KSA values for n-alkanes and PAHs decreased by 0.27-0.89 and 0.61-0.83 times, respectively, with a temperature increase from 5 °C to 35 °C. Moreover, the research identified that the molecular weight of n-alkanes and PAHs contributed to variations in KSA values under identical environmental factors. With an increase in temperature from 5 °C to 35 °C, the range of n-alkanes present in the air phase expanded from C11 to C34, and PAHs showed elevated levels of acenaphthene (ACE) and benzo (b) fluoranthene (BbFA). Furthermore, heightened water content and particle size were observed to facilitate the volatilization of low molecular weight petroleum hydrocarbons. The effect of environmental variables on soil-air partitioning was evaluated using the Box-Behnken design (BBD) model, resulting in the attainment of the lowest log KSA values. These results illustrate that soil-air partitioning is a complex process influenced by various factors. In conclusion, this study improves our comprehension and predictive capabilities concerning the behavior and fate of n-alkanes and PAHs within soil-air systems.

Electrokinetically-delivered persulfate coupled with thermal conductive heating for remediation of petroleum hydrocarbons contaminated low permeability soil

In this study, electrokinetically-delivered persulfate (PS) coupled with thermal conductive heating (TCH) method was proposed for the remediation of petroleum hydrocarbons (PHs) contaminated low-permeability soil, based on the investigation of PS injection and activation by different electric field form, effective heating radius of TCH to activate PS, and their influencing factors. The uniform delivery and effective activation of PS were unrealizable by one-dimensional electric field (1 V/cm) with the operation of cathode injection, anode injection, bipolar injection, polarity-reversal, or bipolar injection coupled polarity-reversal, which would result in large spatial difference of soil pH and PHs residual. Similar results were obtained under the two-dimensional symmetric electric field (TEF) due to the large spatial difference in electric field intensity. Superimposed electric field (SEF, 1 V/cm) that based on the intermittent worked electrode groups coupled with polarity-reversal (every 3 h) and bipolar injection (10% PS solution) operation could achieve homogenized mass transfer of PS (53.8-65.7 g/kg, average 60.0 g/kg) in 15 days, due to the positive correlation between electric field intensity and transport of ionic substance. Meanwhile, the difference in decontamination efficiency caused by difference in PS activation efficiency could be reduced, since the heating rod was placed at the position where the concentrations of PS was the lowest, whereat the removal of PHs could not rely on alkali activated PS (cathode), anodic oxidation (anode), and electrochemical activated PS (cathode and anode). The residual concentration of PHs in soil remediated by SEF/PS-TCH was in the range of 640.7-763.8 mg/kg (average 701.5 mg/kg), and the corresponding removal efficiency was 73.3%-77.6% (average75.4%). The research can provide an in-situ remediation method for organic contaminants in low permeability soil featured with more uniform PS injection and activation, and small spatial differences in remediation efficiency.

Simultaneous remediation of diesel-polluted soil and promoted ryegrass growth by non-thermal plasma pretreatment

The remediation of petroleum-polluted soil has garnered significant global attention. In this study, a pot-culture experiment was conducted to assess the feasibility of using non-thermal plasma (NTP) as an efficient and economic-friendly pretreatment method in the phytoremediation of diesel-polluted soil. The remediation effectiveness was evaluated via both the removal of diesel and the ryegrass growth. Specifically, at the 50th d of ryegrass growth, the increase of diesel removal efficiency with NTP pretreatment ranged from 16 % to 30 %. Moreover, both clean and diesel-polluted soils pretreated by NTP promoted the growth of ryegrass in shoot lengths and biomass especially after the 35th d. It was found that nitrate nitrogen fixed by NTP not only stimulated the nitrate reductase activities in leaves and promoted plant growth, but also was transformed to more ammonia nitrogen for organism life activity. Subsequent investigation proved that the related nitrogen-metabolism activities of microbes were enriched in rhizosphere soils with NTP pretreatment. Furthermore, NTP treatment increased the abundance of beneficial microbial communities in diesel soil rhizosphere on the 42nd d of growth period. In addition, changes in the proportions of soil dissolved organic matter indicated enhanced nutrient cycling in soils with NTP pretreatment. These promotional effects underscored the contribution of NTP pretreatment in rapidly detoxifying diesel-contaminated soil within 10 min and accelerated the establishment of ryegrass ecosystem. This study provides valuable insights into the role of nitrogen fixation and offers an efficient and promising advanced approach for the phytoremediation of diesel-polluted soil with NTP pretreatment.

Quantifying the roles of thermal volatilization and decomposition in microwave remediation of polycyclic aromatic hydrocarbon-polluted soil and modeling remediation effectiveness

Microwave irradiation is a promising technology for the remediation of soil contaminated by organic contaminants. However, the roles of volatilization and decomposition in microwave removal of polycyclic aromatic hydrocarbons (PAHs) in soil have not yet been quantitatively determined. A model describing the removal efficiency of benz(a)anthracene (BaA) at different treatment times and varied conditions was constructed, wherein BaA removal efficiency was positively and linearly correlated with soil temperature. BaA removal in soil was attributed to thermal volatilization (97.8%) and decomposition (2.2%). Radicals such as ∙OH and ∙O 2- were found to initiate BaA decomposition, the pathway of which was elucidated through HPLC-MS analysis, revealing benz(a)anthracene-7,12-dione as the main intermediate product. The new ideas and perspectives founded in this study offer theoretical support for microwave remediation of organic compound-contaminated sites.

In-situ thermal conductive heating (TCH) for soil remediation: A review

This paper provides a comprehensive overview of research works on in-situ thermal conductive heating (TCH), including heat transfer in soil, desorption behavior of pollutants, and mass transfer mechanism within the site. Each stage influences the effectiveness of subsequent stages. Comparison of simulation and experimental results demonstrates that heat transfer and temperature rise in soil are related to the hydrogeological conditions, wells layout and pollutants contents. Thermal desorption of pollutants from soil particles can be influenced by four aspects: energy input, pollutant properties, soil characteristics, and the binding state of pollutant in soil. The exponential decay kinetic model exhibits better applicability for fitting thermal desorption processes. After desorption, the pollutants migrate in soil driven by high temperature and extraction pressure, while hydrogeological conditions of the site determine the actual migration path and rate. Applying convection-dispersion model allows for quantitatively describing the complex migration behavior of pollutants in heterogeneous sites. Future research should focus more on the composite effects of multiple factors in TCH and develop multi-field coupling models through the combination of numerical simulation and in-situ experiments. Accurate characterization and prediction of entire TCH process can improve remediation efficiency, reduce energy costs, and achieve sustainable low-carbon remediation.

New insights into thermal desorption remediation of pyrene-contaminated soil based on an optimized numerical model

Thermal desorption (TD) is known as an effective technique to remediate PAHs-contaminated sites. However, effectively removing PAHs using TD while saving time, and energy, and minimizing soil damage remains a challenge. In this study, we examined the combined effects of various factors on the removal efficiency of pyrene (PYR) by TD and developed an optimal numerical model based on conducting a series of soil experiments. The results showed that temperature (T) and time (t) promoted the desorption of PYR, while water (Sw) and organic matter (fom) were just the opposite. Besides, water and organic matter had a synergistic effect proportionally. It was found that adjusting the soil-water ratio (which can be controlled by organic matter) maximized the desorption rate of PYR. An ideal Sw/fom 1.56 and a minimized recommended temperature (173 °C) were proposed based on the model. Finally, the efficacy of the optimized scheme was validated in real-world site soil. These findings not only mechanistically revealed the desorption behavior of PYR under the influence of various factors, but also provided an optimized scheme for efficiently removing PAHs using TD, thereby accelerating the remediation process and reducing energy consumption. The modeling ideas and conclusions obtained may be applicable to other PAHs, guiding the effective remediation of PAHs-polluted sites.

Effect of electromagnetic induction drying on the drying-incineration process of dyeing sludge: focus on migration and conversion of sulfur

Secondary sulfur pollution in dyeing sludge (DS) during drying and incineration is a major environmental problem necessitating in-situ control. To robustly immobilise sulfur during drying-incineration, the authors introduce an electromagnetic induction (EMI) drying method and reveal the corresponding migration and conversion of sulfur in DS. The EMI-drying efficiency reached 10.69%/min, five times that of thermal drying. EMI drying increases the relative sulfoxide ratio from that of thermal drying. In a sludge-sulfur model, the proposed treatment promoted the oxidation and decomposition of organic sulfur without noticeably affecting the inorganic sulfur. The selective oxidation process during EMI drying promotes sulfur stabilisation in dried DS, decreasing the performance and stability of DS combustion. The sulfur-containing pollutants released during the incineration of DS mainly contain H2S, followed by CH3SH and SO2. EMI drying increases the outputs of SO2 and CH3SH but decreases the outputs H2S and total sulfur compared with the outputs of thermal drying. Under the sulfur-model conditions, EMI promoted the conversion of inorganic sulfur to sulfur-containing gases (especially H2S) during incineration. In contrast, the sulfur stabilised by partial oxidation of organic sulfur in the EMI-dried DS was not easily converted to gaseous sulfur during subsequent combustion. Overall, EMI inhibits the release of sulfur during the combined drying-incineration process of DS.

Optimisation of soil washing method for removal of petroleum hydrocarbons from contaminated soil around oil storage tanks using response surface methodology

Total petroleum hydrocarbons (TPHs), which are often found in soil, water, sediments, and air. These compounds are a type of pollutant that can have a serious negative impact on living things and human health. Soil washing method is a remediation technique used to remove contaminants from the soil. This process involves the use of water or other solvents to extract contaminants from the soil, followed by separation and disposal of the contaminated solution. This research engineered the effectiveness of soil washing method to remove TPHs from a genuine, sullied soil sample. After analyzing the physical and chemical properties of the soil, the Box-Benken Design (BBD) technique was used to optimize the variables that influence the process's effectiveness. A quadratic model was suggested based on the BBD design, correlation coefficients, and other factors. The minimum, maximum and mean removal of TPHs during the stages of the study were 63.5, 94.5 and 76.7%, respectively. The correlation between the variables was strong, as shown by the analysis of variance (ANOVA), F-value (1064.5) and P-value (0.0001), and the proposed model was highly significant. The most effective soil washing method (SWM) was obtained with pH 7.8, liquid to solid ratio 50:1, reaction time 52 min, surfactant concentration 7.9 mg kg-1, and three washings. A removal rate of 98.8% was accomplished for TPHs from the soil in this context. The kinetic results indicate that the kinetic of TPHs removal follows the first-order kinetics (R2 = 0.96). There was not a major difference in the process's efficiency based on temperature. The removal efficiency heightened from 0 to 150 rpm and then remained steady. Introducing air flow increased the rate of removal, and the combination of ultrasonic waves with the reaction environment increased the process efficiency and decreased the time for the process and the amount of times it needed to be washed. An analysis of the washed soil both physically and chemically revealed a substantial decrease in the concentration of other elements.

Feasibility of soil oxidation-reduction potential in judging shear behaviour of hydrocarbon-contaminated soil

This study investigates the indicative role of oxidation-reduction potential (ORP) and pH of hydrocarbon-contaminated soils on their shear characteristics, contributing to safer and more efficient ex-situ remediation and management processes. The presence of hydrocarbons alters the soil's shear strength by affecting the hydration shell thickness, fluid's dielectric properties, and ion/electron exchange, as well as the soil's electrochemical force, which in turn affects the ORP and pH. The relationship between hydrocarbon concentrations in contaminated soils (0.1-15%) and corresponding ORP/pH values could be fitted linearly with a good correlation coefficient r (0.978), highlighting the potential of ORP/pH as an indicator for pollutant occurrence. Furthermore, the relationships between ORP/pH and shear strength, as tested in our study and obtained after processing from relevant literature sources, exhibited a strong fit (r = 0.976-0.995). The Mohr-Coulomb criterion modified using the ORP/pH parameter was established, which could improve the fitting effect of these relationships (r = 0.988-0.996), verifying the reliability of the novel criterion and application feasibility of ORP/pH. In future research, this modified criterion can be employed to conveniently assess the shear strength of contaminated soil by considering the shear behaviour of virgin soil and the ORP/pH values of the contaminated soil.