Application of aluminosilicate clay mineral-based composites in photocatalysis

Optimization of photodegradation of acid blue 1 dye on aluminosilicate supported Cu doped TiO2 magnetic nanocatalyst using response surface methodology

In this study, the magnetic TiO2/Cu/aluminosilicate (MCTA) catalyst was synthesized through a two-step process using the hydrothermal and solvothermal methods. The synthesized materials underwent comprehensive characterization using various analytical techniques. These materials were subsequently applied for the effective elimination of Acid Black 1 dye (AB1). To establish robust correlations among these influential parameters, the research adopted the Box-Behnken design (BBD) within the framework of RSM. This approach ensures a systematic and thorough exploration of the interplay between various variables in the photocatalytic degradation process. In this study, sunlight was utilized as an energy source for the degradation process. The degradation of AB1 reached its peak efficiency under the following optimal conditions: catalyst mass of 0.75 g/L, AB1 concentration of 37.5 mg/L, pH of 3, and a contact time of 45 min. The efficiency, based on the model prediction, was 98.9%, while experimental results showed a 99.1% efficiency. Dark adsorption tests were also conducted, revealing that the dye degradation rate through the photocatalytic process was 18-22 times higher compared to the adsorption process at different concentrations. Toxicity tests revealed that the remaining AB1 in the aquatic environment lost its antibacterial activity after undergoing the studied process. The scavenger experiment provided confirmation that successful photodegradation of AB1 is attributed to the indispensable contribution of both •OH and •O2-. Additionally, MCTA demonstrated outstanding cycle stability in the photocatalytic degradation of AB1. MCTA emerges as a dependable sunlight-responsive heterostructure photocatalyst with significant potential for the photodegradation of pollutants in wastewater treatment.

Insight into hemostatic performance and mechanism of natural mixed-dimensional Attapulgite clay

Clay minerals have attracted wide attention as biomedical materials due to the unique crystal structure, abundant morphology and good biocompatibility. However, the relevant studies on the abundant natural mixed clay deposits were scarcely reported. Herein, the hemostatic performance of natural mixed-dimensional attapulgite clay (MDAPT) composed of one-dimensional attapulgite and multiple two-dimensional clay were systematically investigated based on the structural evolution using oxalic acid for different time. The results of hemostatic evaluation showed that MDAPT leached by oxalic acid with 1 h presented the shortest clotting time (134 ± 12.17 s), a 15.09 % and 41.74 % reduction of relative hemoglobin absorbance at 180 s and 120 s when compared with the control group, respectively, and an increase of 19.45 % of the blood clotting index in vitro, as well as MDAPT obtained the shortest bleeding time (158.5 ± 6.9 s), nearly 66 % and 31 % reduction blood loss as compared to the blank group and the YNBY group in vivo. This improvement was primarily ascribed to the synergistic effect of lamellar non-expandable illite, and nano rod-like attapulgite. Furthermore, the rapid hemostasis of MDAPT was also due to the joint effect of superhydrophobic property toward blood, minimizing blood loss, surface negative charge, metal ions from MDAPT structural skeleton, promoting an average increase of 21 % for platelet activation. The results suggested that MDAPT could be served as a promising efficient inorganic hemostatic materials, which provided a feasible strategy to realize the high-valued utilization of natural mixed clay resources.

Recent advances in nanomaterial-stabilized pickering foam: Mechanism, classification, properties, and applications

Pickering foam is a type of foam stabilized by solid particles known as Pickering stabilizers. These solid stabilizers adsorb at the liquid-gas interface, providing superior stability to the foam. Because of its high stability, controllability, versatility, and minimal environmental impact, nanomaterial-stabilized Pickering foam has opened up new possibilities and development prospects for foam applications. This review provides an overview of the current state of development of Pickering foam stabilized by a wide range of nanomaterials, including cellulose nanomaterials, chitin nanomaterials, silica nanoparticles, protein nanoparticles, clay mineral, carbon nanotubes, calcium carbonate nanoparticles, MXene, and graphene oxide nanosheets. Particularly, the preparation and surface modification methods of various nanoparticles, the fundamental properties of nanomaterial-stabilized Pickering foam, and the synergistic effects between nanoparticles and surfactants, functional polymers, and other additives are systematically introduced. In addition, the latest progress in the application of nanomaterial-stabilized Pickering foam in the oil industry, food industry, porous functional material, and foam flotation field is highlighted. Finally, the future prospects of nanomaterial-stabilized Pickering foam in different fields, along with directions for further research and development directions, are outlined.

Fabrication of engineered biochar for remediation of toxic contaminants in soil matrices and soil valorization

Biochar has emerged as an efficacious green material for remediation of a wide spectrum of environmental pollutants. Biochar has excellent characteristics and can be used to reduce the bioavailability and leachability of emerging pollutants in soil through adsorption and other physico-chemical reactions. This paper systematically reviewed previous researches on application of biochar/engineered biochar for removal of soil contaminants, and underlying adsorption mechanism. Engineered biochar are derivatives of pristine biochar that are modified by various physico-chemical and biological procedures to improve their adsorption capacities for contaminants. This review will promote the possibility to expand the application of biochar for restoration of degraded lands in the industrial area or saline soil, and further increase the useable area. This review shows that application of biochar is a win-win strategy for recycling and utilization of waste biomass and environmental remediation. Application of biochar for remediation of contaminated soils may provide a new solution to the problem of soil pollution. However, these studies were performed mainly in a laboratory or a small scale, hence, further investigations are required to fill the research gaps and to check real-time applicability of engineered biochar on the industrial contaminated sites for its large-scale application.

Natural Nano-Minerals (NNMs): Conception, Classification and Their Biomedical Composites

Natural nano-minerals (NNMs) are minerals that are derived from nature with a size of less than 100 nm in at least one dimension in size. NNMs have a number of excellent properties due to their unique nanostructure and have been applied in various fields in recent years. They are rising stars in various disciplines, such as materials, biomedicine, and chemistry, taking advantage of their huge surface area, multiple active sites, excellent adsorption capacity, large quantity, low cost, and nontoxicity, etc. To provide a more comprehensive overview of NNMs and the biomedical applications of NNMs-based nanocomposites, this review classifies NNMs into three types by dimension, lists the structure and properties of typical NNMs, and illustrates their biomedical applications. Furthermore, a novel concept of natural nanomineral medical materials (NNMMs) is proposed, focusing on the medical value of NNMs. In addition, this review attempts to address the current challenges and delineate future directions for the advancement of NNMs. With the deepening of biomedical applications, it is believed that NNMMMs will inevitably play an important role in the field of human health and contribute to its promotion.

Enhanced photocatalytic performance of Bi2O2CO3/Bi4O5Br2/reduced graphene oxide Z-schemehe terojunction via a one-pot room-temperature synthesis

Bi2O2CO3(BOC)/Bi4O5Br2(BOB)/reduced graphene oxide (rGO) Z-scheme heterojunction with promising photocatalytic properties was synthesized via a facile one-pot room-temperature method. Ultra-thin nanosheets of BOC and BOB were grown in situ on rGO. The formed 2D/2D direct Z-scheme heterojunction of BOC/BOB with oxygen vacancies (OVs) effectively leads to lower negative electron reduction potential of BOB as well as higher positive hole oxidation potential of BOC, showing improved reduction/oxidation ability. Particularly, rGO is an acceptor of the electrons from the conduction band of BOC. Its dual roles significantly improve the transfer performance of photo-induced charge carriers and accelerate their separation. With layered nanosheet structure, rich OVs, high specific surface area, and increased utilization efficiency of visible light, the multiple synergistic effects of BOC/BOB/rGO can achieve effective generation and separation of the electron-holes, thereby generating more •O2- and h+. The photocatalytic reduction efficiency of CO2 to CO (12.91 µmol/(g·hr)) is three times higher than that of BOC (4.18 µmol/(g·hr)). Moreover, it also achieved almost 100% removal of Rhodamine B and cyanobacterial cells within 2 hours.

Nanosized tubular clay minerals as inorganic nanoreactors for energy and environmental applications: A review to fill current knowledge gaps

Modern society pays further and further attention to environmental protection and the promotion of sustainable energy solutions. Heterogeneous photocatalysis is widely recognized as one of the most economically viable and ecologically sound technologies to combat environmental pollution and the global energy crisis. One challenge is finding a suitable photocatalytic material for an efficient process. Inorganic nanotubes have garnered attention as potential candidates due to their optoelectronic properties, which differ from their bulk equivalents. Among them, clay nanotubes (halloysite, imogolite, and chrysotile) are attracting renewed interest for photocatalysis applications thanks to their low production costs, their unique physical and chemical properties, and the possibility to functionalize or dope their structure to enhance charge-carriers separation into their structure. In this review, we provide new insights into the potential of these inorganic nanotubes in photocatalysis. We first discuss the structural and morphological features of clay nanotubes. Applications of photocatalysts based on clay nanotubes across a range of photocatalytic reactions, including the decomposition of organic pollutants, elimination of NOx, production of hydrogen, and disinfection of bacteria, are discussed. Finally, we highlight the obstacles and outline potential avenues for advancing the current photocatalytic system based on clay nanotubes. Our aim is that this review can offer researchers new opportunities to advance further research in the field of clay nanotubes-based photocatalysis with other vital applications in the future.

Synthesis of Kaolin-Supported Nickel Oxide Composites for the Catalytic Oxidative Degradation of Methylene Blue Dye

Organic dye contamination of water is a contributing factor to environmental pollution and has a negative impact on aquatic ecology. In this study, unsupported NiO and kaolin-supported NiO composites were synthesized by a one-step wet impregnation-precipitation method through the precipitation of nickel hydroxide onto locally accessible, inexpensive, and easily treated kaolin surfaces by using sodium hydroxide as a precipitating agent. The product was calcined at 500 °C and used for the catalytic oxidative degradation of methylene blue (MB) dye in an aqueous solution. The morphology, structure, and interactions of the synthesized materials were explored by SEM, XRD, and FT-IR spectroscopy. The characterization results revealed the fabrication and the growth of NiO on the kaolin surface. To determine the catalytic oxidative degradation performance of the catalyst, many experiments have been performed using the MB dye as a model dye. The catalytic degradation tests confirmed the importance of NiO and the high catalytic activity of the synthesized NiO/kaolin composite toward MB dye degradation. The oxidative degradation results showed that the optimized precursor amount on the kaolin surface could efficiently enhance the removal of MB dye. The kinetic investigation of the catalytic degradation of MB dye fitted the pseudo-first-order kinetic model. High removal efficiency was observed after eight reuse cycles, proving the exceptional stability and reusability of the composite. The catalytic process also proceeded with a low activation energy of 30.5 kJ/mol. In conclusion, the kaolin-supported NiO composite was established to be a favorable catalyst to degrade a model dye (MB) from an aqueous solution in the presence of inexpensive and easily available NaOCl with a catalytic efficiency of the material higher than 99% of the 20.3 mg catalyst within 6 min with an apparent rate constant, kapp, higher than 0.44625 min-1, which is far better than that of the unsupported catalyst with a kapp of 0.0926 min-1 at 10 mg dose in 20 min.

New Insight into the Natural Detoxification of Cr(VI) in Fe-Rich Surface Soil: Crucial Role of Photogenerated Silicate-Bound Fe(II)

Photoexcitation of natural semiconductor Fe(III) minerals has been proven to generate Fe(II), but the photogeneration of Fe(II) in Fe-rich surface soil as well as its role in the redox biogeochemistry of Cr(VI) remains poorly understood. In this work, we confirmed the generation of Fe(II) in soil by solar irradiation and proposed a new mechanism for the natural reductive detoxification of Cr(VI) to Cr(III) in surface soil. The kinetic results showed that solar irradiation promoted the reduction of Cr(VI) in Fe-rich soils, while a negligible Cr(VI) reduction was observed in the dark. Fe(II), mainly in the form of silicate-bound Fe(II), was generated under solar irradiation and responsible for the reduction of Cr(VI) in soils, which was evidenced by sequential extraction, transmission electron microscopy with electron energy loss spectroscopy, and electron transfer calculation. Photogenerated silicate-bound Fe(II) resulted from the massive clay-iron (hydr)oxide associations, consisting of iron (hydr)oxides (e.g., hematite and goethite) and kaolinite. These associations could generate Fe(II) under solar irradiation either via intrinsic excitation to produce photoelectrons or via the ligand-to-metal charge transfer process after the formation of clay-iron (hydr)oxide-organic matter complexes, which was proven by photoluminescence spectroscopy and X-ray photoelectron spectroscopy. These findings highlight the important role of photogenerated Fe(II) in Cr(VI) reduction in surface soil, which advances a fundamental understanding of the natural detoxification of Cr(VI) as well as the redox biogeochemistry of Cr(VI) in soil.

Progress and future prospects of hemostatic materials based on nanostructured clay minerals

The occurrence of uncontrolled hemorrhage is a significant threat to human life and health. Although hemostatic materials have made remarkable advances in the biomaterials field, it remains a challenge to develop safe and effective hemostatic materials for global medical use. Natural clay minerals (CMs) have long been used as traditional inorganic hemostatic agents due to their good hemostatic capability, biocompatibility and easy availability. With the advancement of science, technology and ideology, CM-based hemostatic materials have undergone continuous innovations by integrating new inspirations with conventional concepts. This review systematically summarizes the hemostatic mechanisms of different natural CMs based on their nanostructures. Moreover, it also comprehensively reviews the latest research progress for CM-based hemostatic hybrid and nanocomposite materials, and discusses the challenges and developments in this field.

Nanomaterials Aspects for Photocatalysis as Potential for the Inactivation of COVID-19 Virus

Coronavirus disease-2019 is caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and is the most difficult recent global outbreak. Semiconducting materials can be used as effective photocatalysts in photoactive technology by generating various reactive oxidative species (ROS), including superoxide (•O2−) and hydroxyl (•OH) radicals, either by degradation of proteins, DNA, and RNA or by inhibition of cell development through terminating the cellular membrane. This review emphasizes the capability of photocatalysis as a reliable, economical, and fast-preferred method with high chemical and thermal stability for the deactivation and degradation of SARS-CoV-2. The light-generated holes present in the valence band (VB) have strong oxidizing properties, which result in the oxidation of surface proteins and their inactivation under light illumination. In addition, this review discusses the most recent photocatalytic systems, including metals, metal oxides, carbonaceous nanomaterials, and 2-dimensional advanced structures, for efficient SARS-CoV-2 inactivation using different photocatalytic experimental parameters. Finally, this review article summarizes the limitations of these photocatalytic approaches and provides recommendations for preserving the antiviral properties of photocatalysts, large-scale treatment, green sustainable treatment, and reducing the overall expenditure for applications.

Synergistic Effect of Iron and Copper Oxides in the Removal of Organic Dyes Through Thermal Induced Catalytic Degradation Process

This study proposes a new method for producing α-Fe2O3–CuO nanocatalyst that is both cost-effective and ecologically benign. The α-Fe2O3–CuO nanocomposite was prepared via moderate thermal oxidative decomposition of copper hexacyanoferrate. Its structure and surface morphology are affirmed via XRD, SEM, FTIR, EDX, TEM, XPS, and VSM. In the presence of H2O2, α-Fe2O3–CuO is employed as a heterogeneous catalyst to stimulate thermally induced degradation of dyes such as direct violet 4, rhodamine b, and methylene blue. The synergistic effect of Fe2O3 and CuO enhanced the catalytic activity of the nanocomposite compared to Fe2O3 and CuO separately. The effectiveness of DV4 degradation is optimized by evaluating multiple reaction parameters. The reaction rate increased substantially with the temperature, revealing its key role in the degradation process. Higher H2O2 levels and the inclusion of inorganic anions like chloride or nitrate also sped up the degradation process. While sulfate and humic acid, particularly at high doses, slowed it. The mechanism of H2O2 activation on α-Fe2O3–CuO is studied. The measurements of chemical oxygen demand and total organic carbon indicate that all dyes are highly mineralized. The remarkable performance and stability of this nanocomposite in removing diverse dyes render it a promising option for wastewater remedy.

Kaolin-Supported Silver Nanoparticles as an Effective Catalyst for the Removal of Methylene Blue Dye from Aqueous Solutions

Water contamination by organic dyes has become a reason for severe environmental pollution and has been threatening the aquatic ecosystem. In this study, kaolin-supported silver nanoparticle (Ag-NP) composites were synthesized by a facile two-step adsorption-reduction method through the reduction of silver ions adsorbed onto locally available, inexpensive, and easily pretreated kaolin surfaces by using sodium borohydride (NaBH₄) for the catalytic degradation of methylene blue (MB) dye in aqueous solution. The morphology, structure, surface area, and interaction of the synthesized materials were investigated by scanning electron microscopy, X-ray diffraction, Brunauer-Emmett-Teller, and Fourier transform infrared spectroscopy, respectively. Characterization results showed the successful growth of Ag-NPs on the kaolin surface. To understand the catalytic degradation performance of the catalyst, batch experiments were carried out using MB dye as a model dye. The catalytic reduction tests confirmed the importance of Ag-NPs and the high catalytic activities of the synthesized Ag-NPs/kaolin composite toward MB dye reduction. The degradation results indicated that the increased Ag-NP content on the kaolin surface through repeating cycles could effectively enhance the removal of MB dye from an aqueous solution. The kinetic analysis of the MB dye degradation of the catalyst has fitted the pseudo-first-order kinetic model. More than 97% removal efficiency was still present after five reuse cycles, demonstrating exceptional stability and reusability of the composite. In conclusion, the Ag-NPs supported kaolin (Ag-NPs/kaolin) composite was found to be a promising catalyst for the excellent catalytic activity to reduce a model dye MB from the aqueous solution in the presence of NaBH₄ with catalytic efficiency higher than 97% and a reduction rate constant, k _red, higher than 0.86 min^-1.

Biochar for the removal of contaminants from soil and water: a review

Biochar shows significant potential to serve as a globally applicable material to remediate water and soil owing to the extensive availability of feedstocks and conducive physio-chemical surface characteristics. This review aims to highlight biochar production technologies, characteristics of biochar, and the latest advancements in immobilizing and eliminating heavy metal ions and organic pollutants in soil and water. Pyrolysis temperature, heat transfer rate, residence time, and type of feedstock are critical influential parameters. Biochar’s efficacy in managing contaminants relies on the pore size distribution, surface groups, and ion-exchange capacity. The molecular composition and physical architecture of biochar may be crucial when practically applied to water and soil. In general, biochar produced at relatively high pyrolysis temperatures can effectively manage organic pollutants via increasing surface area, hydrophobicity and microporosity. Biochar generated at lower temperatures is deemed to be more suitable for removing polar organic and inorganic pollutants through oxygen-containing functional groups, precipitation and electrostatic attraction. This review also presents the existing obstacles and future research direction related to biochar-based materials in immobilizing organic contaminants and heavy metal ions in effluents and soil.

Graphical Abstract

Application of biochar-based photocatalysts for adsorption-(photo)degradation/reduction of environmental contaminants: mechanism, challenges and perspective

The fast increase of population results in the quick development of industry and agriculture. Large amounts of contaminants such as metal ions and organic contaminants are released into the natural environment, posing a risk to human health and causing environment ecosystem problems. The efficient elimination of contaminants from aqueous solutions, photocatalytic degradation of organic pollutants or the in-situ solidification/immobilization of heavy metal ions in solid phases are the most suitable strategies to decontaminate the pollution. Biochar and biochar-based composites have attracted multidisciplinary interests especially in environmental pollution management because of their porous structures, large amounts of functional groups, high adsorption capacities and photocatalysis performance. In this review, the application of biochar and biochar-based composites as adsorbents and/or catalysts for the adsorption of different contaminants, adsorption-photodegradation of organic pollutants, and adsorption-(photo)reduction of metal ions are summarized, and the mechanism was discussed from advanced spectroscopy analysis and DFT calculation in detail. The doping of metal or metal oxides is the main strategy to narrow the band gap, to increase the generation and separation of photogenerated e−-h+pairs, to produce more superoxide radicals (·O2−) and hydroxyl radicals (·OH), to enhance the visible light absorption and to increase photocatalysis performance, which dominate the photocatalytic degradation of organic pollutants and (photo)reduction of high valent metals to low valent metals. The biochar-based composites are environmentally friendly materials, which are promising candidates in environmental pollution cleanup. The challenge and perspective for biochar-based catalysts are provided in the end.

Graphical Abstract

Low-temperature plasma induced phosphate groups onto coffee residue-derived porous carbon for efficient U(VI) extraction

For the continuous utilization of nuclear energy and efficient control of radioactive pollution, low-cost materials with high efficient U(VI) removal are of great importance. In this study, low temperature plasma method was applied for the successful modification of O-phosphorylethanolamine (O-PEA) on the porous carbon materials. The produced materials (Cafe/O-PEA) could adsorb U(VI) efficiently with the maximum sorption capacity of 648.54 mg/g at 1 hr, T=298 K, and pH=6.0, much higher than those of most carbon-based composites. U(VI) sorption was mainly controlled by strong surface complexation. From FTIR, SEM-EDS and XPS analyses, the sorption of U(VI) was related to the complexation with -NH₂, phosphate and -OH groups on Cafe/O-PEA. The low temperature plasma method was an efficient, environmentally friendly and low-cost method for surface modification of materials for the effective enrichment of U(VI) from aqueous solutions.

Mineral-Supported Photocatalysts: A Review of Materials, Mechanisms and Environmental Applications

Although they are of significant importance for environmental applications, the industrialization of photocatalytic techniques still faces many difficulties, and the most urgent concern is cost control. Natural minerals possess abundant chemical inertia and cost-efficiency, which is suitable for hybridizing with various effective photocatalysts. The use of natural minerals in photocatalytic systems can not only significantly decrease the pure photocatalyst dosage but can also produce a favorable synergistic effect between photocatalyst and mineral substrate. This review article discusses the current progress regarding the use of various mineral classes in photocatalytic applications. Owing to their unique structures, large surface area, and negatively charged surface, silicate minerals could enhance the adsorption capacity, reduce particle aggregation, and promote photogenerated electron-hole pair separation for hybrid photocatalysts. Moreover, controlling the morphology and structure properties of these materials could have a great influence on their light-harvesting ability and photocatalytic activity. Composed of silica and alumina or magnesia, some silicate minerals possess unique orderly organized porous or layered structures, which are proper templates to modify the photocatalyst framework. The non-silicate minerals (referred to carbonate and carbon-based minerals, sulfate, and sulfide minerals and other special minerals) can function not only as catalyst supports but also as photocatalysts after special modification due to their unique chemical formula and impurities. The dye-sensitized minerals, as another natural mineral application in photocatalysis, are proved to be superior photocatalysts for hydrogen evolution and wastewater treatment. This work aims to provide a complete research overview of the mineral-supported photocatalysts and summarizes the common synergistic effects between different mineral substrates and photocatalysts as well as to inspire more possibilities for natural mineral application in photocatalysis.

Modification of Thin Film Composite PVA/PAN Membranes for Pervaporation Using Aluminosilicate Nanoparticles

The effect of the modification of the polyvinyl alcohol (PVA) selective layer of thin film composite (TFC) membranes by aluminosilicate (Al₂O₃·SiO₂) nanoparticles on the structure and pervaporation performance was studied. For the first time, PVA-Al₂O₃·SiO₂/polyacrylonitrile (PAN) thin film nanocomposite (TFN) membranes for pervaporation separation of ethanol/water mixture were developed via the formation of the selective layer in dynamic mode. Selective layers of PVA/PAN and PVA-Al₂O₃·SiO₂/PAN membranes were formed via filtration of PVA aqueous solutions or PVA-Al₂O₃·SiO₂ aqueous dispersions through the ultrafiltration PAN membrane for 10 min at 0.3 MPa in dead-end mode. Average particle size and zeta potential of aluminosilicate nanoparticles in PVA aqueous solution were analyzed using the dynamic light scattering technique. Structure and surface properties of membranes were studied using scanning electron microscopy (SEM), atomic force microscopy (AFM) and water contact angle measurements. Membrane performance was investigated in pervaporation dehydration of ethanol/water mixtures in the broad concentration range. It was found that flux of TFN membranes decreased with addition of Al₂O₃·SiO₂ nanoparticles into the selective layer due to the increase in selective layer thickness. However, ethanol/water separation factor of TFN membranes was found to be significantly higher compared to the reference TFC membrane in the whole range of studied ethanol/water feed mixtures with different concentrations, which is attributed to the increase in membrane hydrophilicity. It was found that developed PVA-Al₂O₃·SiO₂/PAN TFN membranes were more stable in the dehydration of ethanol in the whole range of investigated concentrations as well as at different temperatures of the feed mixtures (25 °C, 35 °C, 50 °C) compared to the reference membrane which is due to the additional cross-linking of the selective layer by formation hydrogen and donor-acceptor bonds between aluminosilicate nanoparticles and PVA macromolecules.

Carbamazepine Removal by Clay-Based Materials Using Adsorption and Photodegradation

Carbamazepine (CBZ) is one of the most common emerging contaminants released to the aquatic environment through domestic and pharmaceutical wastewater. Due to its high persistence through conventional degradation treatments, CBZ is considered a typical indicator for anthropogenic activities. This study tested the removal of CBZ through two different clay-based purification techniques: adsorption of relatively large concentrations (20–500 μmol L−1) and photocatalysis of lower concentrations (<20 μmol L−1). The sorption mechanism was examined by FTIR measurements, exchangeable cations released, and colloidal charge of the adsorbing clay materials. Photocatalysis was performed in batch experiments under various conditions. Despite the neutral charge of carbamazepine, the highest adsorption was observed on negatively charged montmorillonite-based clays. Desorption tests indicate that adsorbed CBZ is not released by washing. The adsorption/desorption processes were confirmed by ATR-FTIR analysis of the clay-CBZ particles. A combination of synthetic montmorillonite or hectorite with low H2O2 concentrations under UVC irradiation exhibits efficient homo-heterogeneous photodegradation at μM CBZ levels. The two techniques presented in this study suggest solutions for both industrial and municipal wastewater, possibly enabling water reuse.

New insight into the regulation mechanism of visible light in naproxen degradation via activation of peroxymonosulfate by MOF derived BiFeO3

BiFeO₃ (BFO) nanocage prepared by metal-organic-framework derivatization (MOF-d) was adopted as activator to first investigate the effect mechanism of visible-light on naproxen-degradation via peroxymonosulfate (PMS) activation. MOF-d BFO expressed more excellent PMS activation ability than hydrothermal-synthetic BFO, due to highly ordered mesopores. A 3.0 times higher pseudo-first-order degradation rate constant was achieved after visible-light introduced. The quenching experiments indicated that the contribution of ROS in naproxen degradation followed the order of SO₄^•->¹O₂ ≈ •OH in MOF-d BFO/PMS/dark system, while changed into h⁺>¹O₂ > >O₂^•-≈SO₄^•-> •OH after visible-light introduced^. EPR tests first revealed that visible-light promoted ¹O₂ yield (non-radical pathway) but suppressed •OH and SO₄^•- generation (free-radical pathways). N₂-purging experiments further proved that ¹O₂ primarily originates from the reaction between h⁺ and PMS, equivalently to that between O₂ and e^--h⁺ in MOF-d BFO/PMS/vis system. Under visible-light, PMS activation via Fe (III) might be hindered by e^- filling on Fe 3d orbital and anion PMS preferred to approach h⁺ rather than e^-, resulting in the decrease of •OH and SO₄^•- yields. Moreover, PMS faces competition from adsorbed-O₂ and oxygen-vacancies for e^- capture. The degradation-pathways for naproxen in dark and under visible light were both proposed in MOF-d BFO/PMS system.

Photoelectrochemical and photo-Fenton mechanism of enhanced visible light-driven nanocatalyst synthesis of ZnFe2O4/BiOI

Based on the fact that the photo-Fenton process can directly use solar energy to degrade various pollutants, it has received widespread attention. However, it has attracted widespread attention due to the rapid recombination of photo-generated carriers and the low light response range. Therefore, the construction of a Z-scheme heterojunction in this paper can effectively enhance the electron-hole separation, increase the reduction and oxidation potential, and enhance the redox capability of the photocatalysis. This paper reports the successful preparation of visible-light-induced ZnFe₂O₄/BiOI composite photocatalysis. There is a Z-scheme heterojunction structure of ZnFe₂O₄ and BiOI. At the same time, the PL and UV absorption spectra showed that the light absorption performance of the composite nanomaterials was enhanced, the photo-generated carrier recombination rate was reduced, and the photo-Fenton performance was also significantly improved. And the photocurrent of ZnFe₂O₄/BiOI is more than 27 times that of pure ZnFe₂O₄. In addition, ZnFe₂O₄/BiOI can degrade the simulated pollutant RhB 100% within 20 min under simulated sunlight. It shows that ZnFe₂O₄/BiOI binary composite has excellent photo-Fenton properties. In addition, ZnFe₂O₄/BiOI still maintains a high photo-Fenton ability after three cycles. Therefore, it has potential application prospects of the industrial photodegradation of organic pollutants.

Degradation of Benzotriazole UV-stabilizers in the presence of organic photosensitizers and visible light: A time-resolved mechanistic study

Benzotriazole UV-stabilizers (BUVSs) are commonly used in industry as solar filters, due to their strong UV light absorption. Because of their extended usage, environmental contamination of waters due to BUVSs constitutes a growing concern. Direct photodegradation of BUVSs is not efficient due to their intrinsic thermal pathways to release the absorbed light. Nevertheless, their abatement in natural environments could be assisted by chromophoric dissolved organic matter. Among the BUVSs, three representative candidates were selected, UV-326, UV-327 and UV-328, to demonstrate the potential of Riboflavin (RF) as a natural visible-light absorbing photocatalyst for the abatement of these recalcitrant pollutants under reductive conditions. The use of visible light and DABCO, as a model sacrificial electron donor, generates the radical anion RFTA^.-. This key species reacts with the solar filters, achieving their reductive abatement from the medium. Moreover, the participation of every potential reactive species has been investigated by photophysical techniques, together with determination of the quenching rate constant for every reaction pathway. Consequently, evidence supported the main role of the reductive photodegradation pathway, being RFTA^.- the key species in the abatement of BUVSs.

Halloysite-Zinc Oxide Nanocomposites as Potential Photocatalysts

The synthesis and structural characterization of synthetic zinc oxide and halloysite-based zinc oxide nanocomposites (with 2–28 m/m% ZnO content) are presented. The chemical precipitation of zinc hydroxide precursors and its subsequent drying at 80 °C yielded dominantly zinc oxide (zincite). Thermal treatment at 350 °C completely transformed the remaining precursor to ZnO without causing structural dehydroxylation of the halloysite support. The procedure yielded zinc oxide nanoparticles with 10–22 nm average size having quasi-spherical scale-like morphology. The specific surface area of the synthetic zinc oxide was found to be low (13 m2/g), which was significantly enhanced after nanocomposite preparation (27–47 m2/g). The photocatalytic activity of the prepared nanocomposites was probed by the degradation of a phenolic compound (4-nitrophenol) upon UV irradiation in liquid phase. Compared to their individual constituents, an increased activity of the nanocomposites was observed, while the SSA-normalized photocatalytic activity revealed a synergic effect in nanocomposites above 9 m/m% ZnO content. The nanocomposites were found to be stable at pH = 5.6, with a minor and major mobilization of zinc ions at pH = 12.4 and pH = 1.9, respectively. The toxicity of leachates in different pH environments by Vibrio fischeri bioluminescence indicated low toxicity for ZnO nanoparticles and insignificant toxicity for the nanocomposites. The enhanced photocatalytic activity together with the lower toxicity of the halloysite-ZnO nanocomposites highlight their application potential in water treatment.

Synthesis of carbon-based nanomaterials and their application in pollution management

With the fast development of industry, large amounts of organic and inorganic pollutants are inevitably released into the natural environment, which results in the pollution of the environment and are thereby dangerous to human health. The efficient elimination of these pollutants is crucial to environment protection and human health. The high sorption capacity of carbon-based materials and high photocatalytic ability of carbon-based composites result in the application of carbon-based materials in environmental pollution cleanup. In this review article, we summarized recent studies on the synthesis of carbon-based materials, and their application in the sorption of organic and inorganic pollutants, the photocatalytic degradation of organic pollutants, and the in situ photocatalytic reduction-solidification of heavy metal ions. The sorption method is useful to remove pollutants from aqueous solutions. The sorption-photocatalytic degradation of organic pollutants is applicable, especially at low concentrations, whereas the catalytic reduction of metal ions is the best method for the in situ immobilization of high valent metal ions under complicated conditions. The interaction mechanism is discussed using advanced spectroscopy analysis and theoretical calculations, and at the end the challenges in the future are described.

A novel scheme for the utilization of Cu slag flotation tailings in preparing internal electrolysis materials to degrade printing and dyeing wastewater

About 60 million tons of Fe-rich Cu slag (IRCS) are generated annually worldwide during Cu slag flotation and cause irreversible water and soil pollution. Current research provides an environmentally friendly technology, the preparation of internal electrolysis materials (IEMs) through the carbothermal reduction of IRCS, for the degradation of printing and dyeing wastewater. XRD and SEM-EDS indicated that carbothermal reduction could promote the conversion of fayalite to zero-valent iron (ZVI), and ZVI could effectively form IEM with residual carbon. The degradation capacity of IEM for methylene blue (MB) was remarkably improved compared with raw IRCS after roasting for 60 min at 1100 °C with 35% anthracite dosage. MB degradation efficiency improved by increasing the IEM dosage and reaction temperature and decreasing the MB concentration and solution pH. FTIR, XRD, SEM-EDS, and XPS all detected the formation of Fe oxide or Fe hydroxide. UV-vis and TOC demonstrated that the characteristic groups of MB were destroyed and resulted in the mineralization of MB. MB degradation could be attributed to the Fe²⁺, [H], and ·OH produced by the galvanic reaction induced by IEM. Overall, this study offers theoretical guidance in the treatment of printing and dyeing wastewater and the reuse of IRCS.

Fabrication and Characterization of Co-Doped Fe2O3 Spindles for the Enhanced Photo-Fenton Catalytic Degradation of Tetracycline

Co-doped Fe2O3 spindles with different Co contents were successfully fabricated by a facile one-step hydrothermal method. The crystalline structure, morphology, optical properties, and chemical state of the as-prepared catalysts before and after photo-Fenton reaction were characterized. Co2+ incorporated into the Fe2O3 lattice was confirmed by the above characterizations. Also, the photocatalytic and photo-Fenton catalytic performances of the samples were evaluated by the degradation of tetracycline (TC) under visible light irradiation in the absence/presence of H2O2. The results demonstrated that Co-doped Fe2O3 spindles exhibited better catalytic degradation performance in comparison with single Fe2O3 spindles, and the sample of Co(5%)-Fe2O3 spindles displayed the highest activity and best stability. The improvement of photo-Fenton activity might be attributed to two reasons: On the one hand, Co-doped Fe2O3 spindles not only formed the Fe vacancies to reduce the band gap but also could build up an internal electric field, which inhibits electron/hole pair recombination and facilitates the transfer of photoexcited charge carriers. On the other hand, the intrinsic Co2+/Co3+ redox cycling can accelerate the circulation between Fe2+ and Fe3+ in Co(5%)-Fe2O3 spindles to facilitate H2O2 consumption and produce more ·OH radicals for TC degradation.

Metal-Organic-Framework Based Functional Materials for Uranium Recovery: Performance Optimization and Structure/Functionality-Activity Relationships

Uranium recovery has profound significance in both uranium resource acquisition and pollution treatment. In recent years, metal-organic frameworks (MOFs) have attracted much attention as potential uranium adsorbents owing to their tunable structural topology and designable functionalities. This review explores the research progress in representative classic MOFs (MIL-101, UiO-66, ZIF-8/ZIF-67) and other advanced MOF-based materials for efficient uranium extraction in aqueous or seawater environments. The uranium uptake mechanism of the MOF-based materials is refined, and the structure/functionality-property relationship is further systematically elucidated. By summarizing the typical functionalization and structure design methods, the performance improvement strategies for MOF-based adsorbents are emphasized. Finally, the present challenges and potential opportunities are proposed for the breakthrough of high-performance MOF-based materials in uranium extraction.