Feasibility of low-intensity ultrasound treatment with hydroxylamine to accelerate the initiation of partial nitrification and allow operation under intermittent aeration

Low-Frequency Ultrasound Assisted in Improvement in Cell Development and Production of Parasporal Crystals from Bacillus thuringiensis HD1

Bacillus thuringiensis is widely utilized as a microbial insecticide due to its production of parasporal crystals during the spore-forming stage. However, lower fermentation efficiency coupled with elevated production costs limit its broad application. Low-frequency ultrasound (LFU) has been employed in the fermentation industry to enhance microbial growth and metabolism. In this study, the effect of LFU on the growth of B. thuringiensis HD1 and the yields of parasporal crystals was investigated. The maximum biomass accumulation of Bacillus thuringiensis and parasporal crystal production yield were achieved following low-frequency ultrasonic (LFU) treatment applied during the logarithmic growth phase (18 h of cultivation) under optimized parameters: a frequency of 40 kHz, a power output of 176 W, and an irradiation duration of 45 min. Under optimal conditions, LFU significantly increased the cell membrane permeability and secretory inositol, favoring cell growth and parasporal crystal production. FESEM/CLSM and TEM analyses visually displayed the changes in cell morphology. In addition, the germination rate of spores was increased after LFU treatment, which further confirmed the positive effect of LFU on the growth of B. thuringiensis. Compared to the control, parasporal crystals harvested under LFU exhibited significant modifications in their physicochemical characteristics; the particle size increased, the surface electronegativity intensified, and there was a morphological transition from spherical to cubic geometry. Importantly, the parasporal crystals exhibited strong insecticidal activity against S. zeamais adults, a typical stored-product insect pest, with an LC50 of 10.795 mg/g on day 14 and a Kt50 of 4.855 days at a concentration of 30 mg/g. These findings will provide new insights into the product development and application of B. thuringiensis in the future.

Influence of high-load shocks on achieving mainstream partial nitrification: Microbial community succession

Driving microbial community succession through the regulation of operational strategies is crucial for achieving partial nitrification (PN) in municipal wastewater. However, at present, there is a decoupling between the strategic regulation of PN systems and the succession characteristics of the microbial community. This study examined the correlation between microbial community succession and PN performance under two high-load shocks (HLS1 and HLS2) treating actual sewage. During HLS1, the influent organic loading rate (OLR) and nitrogen loading rate (NLR) increased from 116.7 ± 37.7 to 219.7 ± 24.7 mg COD/(g VSS·d) and 0.21±0.02 to 0.33±0.02 kg N/m3/d respectively, with the nitrite concentration and nitrite accumulation ratio only reaching 11.7 ± 2.7 mg/L and 49.3 ± 13.9 %, respectively. During HLS2, the influent OLR and NLR increased from 123.5 ± 17.2 to 300.3 ± 49.2 mg COD/(g VSS·d) and 0.19±0.03 to 0.32±0.03 kg N/m3/d respectively, resulting in a nitrite accumulation ratio of 89.4 ± 10.7 %. The system achieved efficient PN performance and sustained for 124 days. High-throughput sequencing results showed that community diversity remained consistently high, and the community composition returned to its initial state following a minor succession during HLS1. During HLS2, the high-load shock reduced the richness and evenness of the microbial community. The community underwent succession in a new direction, leading to community composition and function changes. The results indicate that the realization, stabilization, and disruption of PN are influenced not only by operational parameters but also by microbial community structure.