Stability-indicating spectrofluorimetric method with enhanced sensitivity for determination of vancomycin hydrochloride in pharmaceuticals and spiked human plasma: Application to degradation kinetics

Micellar media effect on the ultrasensitive quantitation of a diuretic medication at nano-scale levels with environmentally benign impact

A novel micelle-augmented spectrofluorimetric method is proposed for the ultrasensitive estimation of bumetanide (BUM) at nanoscale concentrations. The method utilizes the unique properties of micelles to enhance the fluorescence intensity of BUM and measures its native fluorescence at 415 nm after excitation at 267 nm. The proposed method was optimized by evaluating the effect of organized media, buffer pH, and diluting solvent. The method validity was further assessed following the ICH guidelines, where excellent linearity was obtained over a concentration range of 40.0-400.0 ng mL-1, with a correlation coefficient of 0.9999 and a low limit of detection (LOD) of 5.31 ng mL-1. The method was further applied for the determination of BUM in different dosage forms with % recoveries greater than 98%, as well as for content uniformity testing. Ultimately, a comprehensive assessment of the method's environmental impact was performed using different metrics, highlighting the eco-friendly nature of the method and underlining its potential for sustainable analytical practices in pharmaceutical research and beyond.

Boosting bepotastine fluorescence by switching off intramolecular photoinduced electron transfer: Application to eye drops and aqueous humor

Bepotastine (BPT), a second-generation antihistamine used for treating allergic rhinitis and pruritus, requires precise dosage calculation and accurate measurement in aqueous humor to ensure therapeutic efficacy and avoid adverse effects. This study presents a highly sensitive, cost-effective, readily-implementable, and ecologically sustainable method to detect BPT by enhancing its weak native fluorescence. This has been achieved by switching off the intramolecular photoinduced electron transfer (PET) process through phosphoric acid-induced protonation of the nitrogen in the piperidinyl ring. Further fluorescence enhancement was achieved by incorporating a solution of sodium dodecyl sulfate (SDS) surfactant thus increasing the quantum yield of BPT up to 10 folds. Fluorescence intensity was measured at 425 nm following excitation at 265 nm. The method, validated according to ICH guidelines, demonstrated linearity over the range of 0.70-6.0 µg/mL with a correlation coefficient of 0.9972 and a low detection limit of 0.046 µg/mL. It was successfully applied to measure BPT in aqueous humor and eye drops with % recoveries between 97.59 % and 102.62 %. Finally, sustainability was assessed using various tools, confirming the method's practicality for routine clinical and pharmaceutical quality control analyses.

Electrochemical and optical (bio)sensors for analysis of antibiotic residuals

Antibiotic residuals in foods may lead to crucial health and safety issues in the human body. Rapid and in-time analysis of antibiotics using simple and sensitive techniques is in high demand. Among the most commonly applicable modalities, chromatography-based techniques like HPLC and LC-MS, along with immunological approaches, particularly ELISA have been exampled in the analysis of antibiotics. Despite being highly sensitive, these methods are considerably time-consuming, thus the presence of skilled personnel and costly equipment is essential. Nanomaterial-based (bio)sensors, however, are de novo analytical equipment with some beneficial characteristics, such as simplicity, low price, on-site, high accuracy, and sensitivity for the detection of analytes. This review aimed to collect the latest developments in NM-based sensors and biosensors for the observation of highly used antibiotics like Vancomycin (Van), Linezolid (Lin), and Clindamycin (Clin). The current challenges and developmental perspectives are also debated in detail for future research directions.

Cobalt-modulated dual emission carbon dots for ratiometric fluorescent vancomycin detection

This work presents a simple yet selective fluorometric protocol for the quantification of vancomycin, an important antibiotic for treating infections caused by Gram-positive bacteria. A novel ratiometric fluorometric method for the determination of vancomycin is developed based on dual emissive carbon dots (DECDs) with emission at 382 nm and 570 nm in combination with Co2+ ions. Upon addition of Co2+ions, the fluorescence at 382 nm of DECDs is enhanced while emission at 570 nm remains constant. In the presence of vancomycin, it complexes with Co2+ leading to quenching of the 382 nm fluorescence due to strong binding with Co2+ in the Co@DECDs system. The DECDs are fully characterized by TEM and different spectroscopic techniques. The proposed ratiometric method is based on measuring fluorescence ratio (F570/F382) against vancomycin concentration and the method exhibits a good linearity range from 0.0 to 120.0 ng mL-1 with a low limit of detection (S/N = 3) of 0.31 ng mL-1. The method shows good selectivity with minimal interference from potential interfering species. This ratiometric fluorometric approach provides a promising tool for sensitive and specific vancomycin detection in clinical applications.

Simple and affordable synchronous spectrofluorimetric determination of the natural anticancer polyphenols; resveratrol and curcumin in human plasma

In this work, resveratrol and curcumin, two natural polyphenols, were simultaneously determined in human plasma samples using a rapid, sensitive, green, and affordable synchronous fluorescence spectroscopic approach. Several factors affecting the performance of the procedure, including Δλ, pH, diluting solvent, and organized medium, were optimized. Based on the findings, the fluorescence of resveratrol and curcumin was measured at 304 and 443 nm, respectively, with Δλ of 80.0 nm and ethanol as the diluting solvent. Excellent linearity was demonstrated by the approach (r = 0.9999) over the concentration range of 5.00-1000.00 and 2.00-400.00 ng/mL for resveratrol and curcumin, respectively. The obtained detection limits for resveratrol and curcumin were 0.027 and 0.042 ng/mL, respectively, indicating the high sensitivity of the proposed method. Moreover, the method exhibited excellent precision (both inter and intra-day), with %RSD < 1 %. The "green analytical process index" and "Analytical GREEnness" metric tools were used to compare the green profiles of the proposed method to those of the published methods. These two greenness evaluation tools verified that the suggested methodology satisfied the greatest number of green criteria, proposing its usage as a green alternative for the routine analysis of the investigated natural anticancer polyphenols in human plasma.

Anionic polysaccharides for stabilization and sustained release of antimicrobial peptides

Chemical and enzymatic in vivo degradation of antimicrobial peptides represents a major challenge for their therapeutic use to treat bacterial infections. In this work, anionic polysaccharides were investigated for their ability to increase the chemical stability and achieve sustained release of such peptides. The investigated formulations comprised a combination of antimicrobial peptides (vancomycin (VAN) and daptomycin (DAP)) and anionic polysaccharides (xanthan gum (XA), hyaluronic acid (HA), propylene glycol alginate (PGA) and alginic acid (ALG)). VAN dissolved in buffer of pH 7.4 and incubated at 37 °C showed first order degradation kinetics with a reaction rate constant k_obs of 5.5 × 10^-2 day^-1 corresponding with a half-life of 13.9 days. However, once VAN was present in a XA, HA or PGA-based hydrogel, k_obs decreased to (2.1-2.3) × 10^-2 day^-1 while k_obs was not affected in an alginate hydrogel and a dextran solution (5.4 × 10^-2 and 4.4 × 10^-2 day^-1). Under the same conditions, XA and PGA also effectively decreased k_obs for DAP (5.6 × 10^-2 day^-1), whereas ALG had no effect and HA even increased the degradation rate. These results demonstrate that the investigated polysaccharides (except ALG for both peptides and HA for DAP) slowed down the degradation of VAN and DAP. DSC analysis was used to investigate on polysaccharide ability to bind water molecules. Rheological analysis highlighted that the polysaccharides containing VAN displayed an increase in G' of their formulations, pointing that the peptides interaction act as crosslinker of the polymer chains. The obtained results suggest that the mechanism of stabilization of VAN and DAP against hydrolytic degradation is conferred by electrostatic interactions between the ionizable amine groups of the drugs and the anionic carboxylate groups of the polysaccharides. This, in turn, results in a close proximity of the drugs to the polysaccharide chain, where the water molecules have a lower mobility and, therefore, a lower thermodynamic activity.

Green synchronous spectrofluorimetric method for the simultaneous determination of agomelatine and venlafaxine in human plasma at part per billion levels

A novel sustainable, simple, sensitive, and green spectrofluorimetric method was developed for the concurrent estimation of venlafaxine and agomelatine in pharmaceuticals and biological fluids. The method relies on synchronous fluorescence spectroscopy, where venlafaxine and agomelatine were measured at 276 and 328 nm, respectively, using Δλ of 20 nm. The potential factors affecting the fluorescence intensity were optimized by the one-factor-at-a-time (OFAT) strategy, where synchronous fluorescence intensity was significantly enhanced using a 1% w/v sodium dodecyl sulfate micellar system. The method was fully validated and exhibited excellent linearity (r² > 0.999 for both drugs) with very low limits of detection (LODs) in the range of 0.14-0.84 ng/mL. Consequently, the proposed approach was efficiently adopted to analyze the co-administered drugs in their pharmaceuticals and in spiked human plasma with excellent % recovery between 97.4 and 102.2%. Finally, the method's greenness was evaluated using different metric tools, including Green Analytical Procedure Index (GAPI) and Analytical GREEnness (AGREE), which proved its excellent greenness.

An Overview of Analytical Methodologies for Determination of Vancomycin in Human Plasma

Vancomycin is regarded as the last resort of defense for a wide range of infections due to drug resistance and toxicity. The detection of vancomycin in plasma has always aroused particular concern because the performance of the assay affects the clinical treatment outcome. This article reviews various methods for vancomycin detection in human plasma and analyzes the advantages and disadvantages of each technique. Immunoassay has been the first choice for vancomycin concentration monitoring due to its simplicity and practicality, occasionally interfered with by other substances. Chromatographic methods have mainly been used for scientific research due to operational complexity and the particular requirement of the instrument. However, the advantages of a small amount of sample needed, high sensitivity, and specificity makes chromatography irreplaceable. Other methods are less commonly used in clinical applications because of the operational feasibility, clinical application, contamination, etc. Simplicity, good performance, economy, and environmental friendliness have been points of laboratory methodological concern. Unfortunately, no one method has met all of the elements so far.

Smartphone-based digital image colorimetry for the determination of vancomycin in drugs

A simple smartphone-based digital image colorimetry is proposed for the determination of vancomycin in drugs. The analytical method relied on the reaction of vancomycin with copper(II) in ethanol–water medium with pH 4.3. The reaction resulted in the formation of a blue–grey complex, presenting an absorption maximum at 555 nm. A mobile application was used for smartphone-based analysis to decompose the individual channels of the colour model representations. The determination was performed using three smartphones followed by a comparison of the outcomes with spectrophotometric measurements. The most optimal analytical parameters were achieved for the H channel. The linear ranges obtained for the smartphone-based method proved to be comparable to the spectrophotometric range of 0.044–1.500 g dm−3 and were 0.049–1.500 g dm−3, 0.057–1.500 g dm−3, and 0.040–1.500 g dm−3 for Smartphones 1–3, respectively. Moreover, the determined coefficients of variance (CV, n = 9) and limits of detection (LOD) were 2.3% and 0.015 g dm−3, 6.2% and 0.017 g dm−3, and 2.5% and 0.012 g dm−3, respectively. Whereas for spectrophotometry, the obtained precision, CV was of 0.9% and a LOD of 0.013 g dm−3. The accuracy of the method was verified using model samples, generally the results were obtained with accuracy better than 10.9% (relative error). The method was applied to the determination of vancomycin in drugs. The results obtained by smartphone-based colorimetry did not differ from the expected values for more than 2.6%, were consistent with each other and with the results of spectrophotometric determinations.

Graphical abstract

Chemiluminescence determination of vancomycin by using NiS nanoparticles-luminol-O2 system

In this research, NiS nanoparticles (NPs) were produced using a hydrothermal technique and characterized by several spectroscopic methods. Here, for the first time, it was shown that NiS NPs could be exploited as a nanocatalyst in a chemiluminescence (CL) reaction. Here, it was introduced that NiS NPs could intensify luminol-O₂ CL reaction, remarkably. Besides, it was shown that vancomycin (VAN) suppresses the CL intensity of NiS NPs-luminol-O₂ reaction. By exploiting the results obtained, a new and straightforward CL method was developed for the measurement of VAN. The linear concentration range of the CL method was 4.00 × 10^-6 - 1.00 × 10^-3 mol L^-1. The limit of detection (LOD) was equal to 1.40 × 10^-6 mol L^-1 and the relative standard deviation (RSD) of the CL method was 3.00% (n = 6) for the determination of 8.00 × 10^-5 mol L^-1 VAN. The established CL method was applied to quantify VAN in the injection and spiked human serum.

Concurrent estimation of some co-administered antimicrobial drugs applying conventional and first derivative synchronous fluorescence spectroscopy techniques

For the estimation of some co-administered antimicrobials, two highly accurate and precise spectrofluorimetric methods were developed. Fluconazole (FLZ) is co-administered with either ciprofloxacin (CPR) or ofloxacin (OFX) for the treatment of certain microbial infections. On the other hand, another antimicrobial drug, vancomycin (VNC) is co-administered with ciprofloxacin (CPR) for peritonitis treatment. In method I, conventional spectrofluorimetry has been introduced for the concurrent quantitative estimation of FLZ in presence of OFX or CPR. While in method II, a first derivative synchronous spectrofluorimetric technique was adapted for quantitation of VNC and CPR co-administered combination. Both of them were utilized for estimation of the considered drugs in raw materials, laboratory prepared mixtures, dosage forms, and biological fluids. Method I was relied on simultaneous measuring of the native fluorescence of FLZ and OFX or CPR without any overlapping between the emission spectra of each binary mixture (FLZ / OFX) and (FLZ / CPR). Fluorescence intensities were measured at 283.0, 483.0 and 436.0 nm after excitation at 262.0, 292.0 and 275.0 nm for FLZ, OFX and CPR, respectively. Method II was utilized the synchronous fluorescence intensity of VNC and CPR in methanol at Δλ = 40 nm. The first derivative synchronous spectra were calibrated at 297.0 nm for VNC and at 379.5 nm for CPR. Different variables influencing conventional and synchronous fluorescence intensities of the four antimicrobials under investigation were precisely optimized. Both methods were successfully investigated for the determination of the studied drugs in plasma. The linear data analysis for the calibration curves reveals a good relationship in the ranges of 1.0-10.0, 0.25-2.5 and 0.06-0.6 μg/mL for FLZ, OFX and CPR for method I with limits of detection 0.144, 0.038 and 0.007 μg/mL and limits of quantitation of 0.437, 0.114 and 0.021 μg/mL for FLZ, OFX and CPR, respectively. Linearity range for method II was 0.5 -10.0 μg/mL for VNC and CPR with detection limits of 0.127 and 0.110 μg/mL and quantitation limits of 0.380 and 0.334 μg/mL for VNC and CPR, respectively. International Council on Harmonization ICH Q2 (R1) Guidelines were followed in the developed methods validation. The achieved outcomes were statistically compared with those found by the reported ones, and no significant difference was observed.

Utility of Silver-nanoparticles for Nano-fluorimetric Determination of Vancomycin Hydrochloride in Pharmaceutical Formulation and Biological Fluids: Greenness Assessment

Vancomycin hydrochloride (VANH) is a glycopeptide antibiotic commonly employed in the prophylaxis and therapy of various gram-positive bacterial life-threatening infections. Due to the narrow therapeutic window of VANH, its serum levels should be well-monitored to avoid its toxicity and to optimize its therapy. Herein, an innovative silver-nanoparticles enhanced fluorescence technique was designed for VANH rapid analysis in its pharmaceutical formulation and biological fluids. This technique is based on reinforcement of VANH fluorescence intensity with silver-nanoparticles that were synthesized by a redox reaction between VANH and silver nitrate in NaOH alkaline medium using polyvinylpyrrolidone as a stabilizer. The produced silver-nanoparticles were characterized by using UV-visible spectroscopy where they have an intense absorption maximum at 415 nm and transmission electron microscope (TEM) micrograph where they are spherical in shape with smooth surface morphology and size of 10.74 ± 2.44 nm. The fluorescence intensity was measured at 394 nm after excitation at 259 nm. Under optimum conditions, a good linear relationship was accomplished between the VANH concentration and the fluorescence intensity in a range of (1-36) ng/mL with a limit of detection of 0.29 ng/mL. Greenness assessment was performed using two assessment tools namely; eco-scale scoring and green analytical procedure index revealing excellent greenness of the proposed technique. The proposed technique was validated according to the International Conference on Harmonisation (ICH) recommendations and statistically compared with the reported HPLC method revealing no significant difference concerning accuracy and precision at p = 0.05. The proposed technique depended primarily on water as a cheap and eco-friendly solvent.

Investigation of some univariate and multivariate spectrophotometric methods for concurrent estimation of Vancomycin and Ciprofloxacin in their laboratory prepared mixture and application to biological fluids

Four simple, rapid, accurate and precise spectrophotometric methods were established and validated in accordance with ICH Q2 (R1) guidelines for the simultaneous determination of Vancomycin (VNC) and Ciprofloxacin (CPR) in their raw materials, laboratory prepared mixtures and pharmaceutics. Method A depends on using first derivative spectrophotometry (D¹) where VNC and CPR were resolved at 243.6 and 262.0 nm, respectively. Concerning method B, it is based on utilizing first derivative of ratio spectra (DD¹) where determination was performed at the peak maxima at 244.0 nm and 258.0 nm for VNC and CPR, respectively. Two chemometric models were applied for the quantitative analysis of both drugs in their laboratory prepared mixtures, namely, partial least squares (PLS) (method C) and artificial neural network (ANN) (method D). For univariate methods linearity range for both drugs was in the range of 3-30 and 1-10 μg/mL for VNC and CPR, respectively. Multivariate calibration methods using five level, two factor calibration model for the development of 25 mixtures were also applied for the simultaneous estimation of the two drugs in their laboratory prepared mixture using spectral region from 200.0 to 300.0 nm using interval 1 nm. The suggested methods have been successfully extended to the assay of the two studied drugs in laboratory-prepared mixtures and pharmaceuticals with excellent recovery. First derivative spectrophotometry (D¹) was also applied for the assay of both analytes in spiked human plasma with good recovery. No interaction with common pharmaceutical additives has been observed which indicate the selectivity of the method. The results obtained were favourably compared with those obtained applying the reported methods. The methods are validated in compliance with the ICH Q2 (R1) guidelines and the measured accuracy and precision are assessed to be within the accepted limits.