Decontamination of solutions containing Cu(II) and ligands tartrate, glycine and quadrol using metallic iron

Quadrol-Pd(II) complexes: phosphine-free precatalysts for the room-temperature Suzuki-Miyaura synthesis of nucleoside analogues in aqueous media

Commercially available Quadrol, N,N,N',N'-tetrakis(2-hydroxypropyl)ethylenediamine (THPEN), has been used for the first time as a N^N-donor neutral hydrophilic ligand in the synthesis and characterization of new water soluble palladium(II) complexes containing chloride, phthalimidate or saccharinate as co-ligands. [PdCl₂(THPEN)] (1) [Pd(phthal)₂(THPEN)] (2), [Pd(sacc)₂(THPEN)] (3) and the analogous complex with the closely related N,N,N',N'-tetrakis(2-hydroxyethyl)ethylenediamine (THEEN) [Pd(sacc)₂(THEEN)] (4) were efficiently prepared in a one-pot reaction from [PdCl₂(CH₃CN)₂] or Pd(OAc)₂. Structural characterization of 1 and 3 by single crystal X-ray diffraction produced the first structures reported to date of palladium complexes with Quadrol. The resultant palladium complexes are highly soluble in water and were found to be effective as phosphine-free catalysts for the synthesis of functionalized nucleoside analogues under room-temperature Suzuki-Miyaura cross-coupling conditions between 5-iodo-2'-deoxyuridine (& 5-iodo-2'-deoxycytidine) with different aryl boronic acids in neat water. This is the first report of the coupling process performed on nucleosides in water at room temperature.

Disodium N,N-bis-(dithiocarboxy)ethanediamine: synthesis, performance, and mechanism of action toward trace ethylenediaminetetraacetic acid copper (II)

A new effective multi-dithiocarbamate heavy metal precipitant, disodium N,N-bis-(dithiocarboxy) ethanediamine (BDE), was synthesized by mixing ethanediamine with carbon disulfide under alkaline conditions, and it was utilized for removing trace ethylenediaminetetraacetic acid copper (II) (EDTA-Cu) from wastewater. Its structure was confirmed by ultraviolet spectra, Fourier transform infrared spectra, scanning electron microscopy, thermogravimetric analysis, and elemental analysis. The removal performance of EDTA-Cu by BDE was evaluated according to BDE dosage, initial concentration, pH, and reaction time through single-factor experiments. With the optimized conditions of a pH range of 3-9, dosage ratio of BDE/Cu of 1:1, PAM dosage of 1 mg/L, and reaction time of 4 min, the removal efficiency of Cu(2+) was more than 98 % from simulated wastewater containing EDTA-Cu with initial concentrations of 5-100 mg/L. Treatment of actual EDTA-Cu wastewater showed that BDE performed superior effectiveness, and the average residential concentration of Cu(2+) was 0.115 mg/L. Besides, the stability of chelated precipitate and the reaction mechanism of BDE and EDTA-Cu were also introduced. The toxicity characteristic leaching procedure (TCLP) and semi-dynamic leaching test (SDLT) indicated that the chelated precipitate was non-hazardous and stable in weak acid and alkaline conditions. The BDE reacts with EDTA-Cu at a stoichiometric ratio, and the removal of Cu(2+) was predominantly achieved through the replacement reaction of BDE and EDTA-Cu.

Decomplexation and subsequent reductive removal of EDTA-chelated Cu II by zero-valent iron coupled with a weak magnetic field: Performances and mechanisms

The feasibility of EDTA-chelated Cu(II) (Cu(II)-EDTA) removal by zero-valent iron (Fe(0)) in the presence of a weak magnetic field (WMF) and the involved mechanisms were systematically investigated. Fe(0) combined with WMF (Fe(0)/WMF) was very effective for removing Cu(II)-EDTA at pH 4.0-6.0 with the rate constants ranging from 0.1190 min(-1) to 0.0704 min(-1). Little passivation of Fe(0) was observed during Cu(II)-EDTA removal by Fe(0)/WMF in 8 consecutive runs when 10.0 mg L(-1) Cu(II)-EDTA was dosed before the initiation of each run. The evidences presented in this study verified that Cu(II)-EDTA was removed by decomplexation followed by reduction/adsorption. In brief, Fe(II) released from Fe(0) corrosion was rapidly oxidized by oxygen to Fe(III) to chelate with EDTA and release free Cu(II), and the detached Cu(II) ions were subsequently reduced/removed by Fe(0)/Fe(II) and co-precipitated by the generated iron (hydr)-oxides. To advance the application of Fe(0)/WMF technology in real practice, a magnetic propeller agitator was designed to offer WMF inside the reactor, which could greatly improve Cu(II)-EDTA removal by Fe(0) and be easily amplified.

Comments on "Decontamination of solutions containing Cu(II) and ligands tartrate, glycine and quardol using metallic iron" [J. Hazard. Mater. (175 (2010) 452-459)]

This letter presents ways for an improved discussion of the data provided in a recent article on aqueous removal of Cu(II) complexes from aqueous solutions using metallic iron (Fe(0)) by Gyliene and his co-workers. It is shown that the authors have furnished another brilliant validation of the concept that adsorption onto iron corrosion products and co-precipitation with iron corrosion products are the fundamental mechanisms of dissolved contaminant removal in Fe(0)/H(2)O systems.