Slurry analysis of cadmium and copper collected on 11-mercaptoundecanoic acid modified TiO2 core-Au shell nanoparticles by flame atomic absorption spectrometry

An effective procedure used metal-organic framework for determination of cadmium ions in real tap water and human blood plasma samples

A newly developed 2H5MA-MOF sensor by covalently linking NH2-MIL-53(Al) with 2'-Hydroxy-5'-methylacetophenon, designed for highly sensitive and selective detection of Cd2+ ions using fluorometric methods. Detailed structural and morphological analyses confirmed the sensor's unique properties. It demonstrated an impressive linear detection range from 0 to 2 ppm, with an exceptionally low detection limit of 5.77 × 10-2 ppm and a quantification limit of 1.75 × 10-1 ppm, indicating its high sensitivity (R2 = 0.9996). The sensor also responded quickly, detecting Cd2+ within just 30 s at pH 4. We successfully tested it on real samples of tap water and human blood plasma, achieving recovery rates between 96 % and 104 %. The accuracy of these findings was further validated by comparison with ICP-OES. Overall, the 2H5MA-MOF sensor shows great potential for fast, ultra-sensitive, and reliable detection of Cd2+ ions, making it a promising tool for environmental and biomedical applications.

Highly sensitive colorimetric detection of Cd(ii) based on silica sol modified with dithizone and cationic surfactant

The cadmium ion (Cd2+) is highly poisonous and nondegradable and easily bioaccumulates through the food chain. Therefore, it is crucial to develop cost-effective chemical sensors for Cd2+ with fast response time, high selectivity, and very low detection limits. In this study, a colorimetric sensor for the determination of Cd2+ was fabricated by modifying silica sol with dodecyltrimethylammonium bromide (DTAB) and dithizone (DZ). Cd2+ formed a complex with DZ, changing the solution color immediately from purple to orange prior to detection using ultraviolet-visible spectrophotometry and a customized Cd analyzer for the precipitate. Under the optimum conditions, the developed Cd2+ sensor had a linear range of 0.01-0.25 mg L-1, a low limit of detection of 5.0 μg L-1, and outstanding repeatability. This sensor also showed good precision, with the relative standard deviations of less than 2.59% and 3.24% for the intra- and inter-day data, respectively. The proposed colorimetric method was successfully applied to determine Cd2+ in environmental water samples, and the results were comparable to those obtained using standard atomic absorption spectrometry. Moreover, quantitative analysis was conducted using the customized Cd analyzer to estimate the color intensity change, without requiring sophisticated scientific instruments. This colorimetric sensor can be used for the portable, cost-effective, and rapid on-site detection of Cd2+ in environmental water samples.

Sensitive electrochemical sensor for Cd2+ with engineered short high-affinity aptamer undergoing large conformation change

Cadmium ion (Cd2+) is a highly toxic heavy metal ion that threatens the environment and human health. To achieve rapid and sensitive detection of Cd2+, here we developed a reagent-less aptamer electrochemical sensor by immobilizing an engineered high-affinity DNA aptamer with a redox tag of methylene blue (MB) on the gold electrode. After testing a series of engineered aptamer sequences, we employed an optimal and new 15-mer aptamer with a short 3-bp stem for sensor fabrication, which underwent large conformation change upon Cd2+ binding. This aptamer retained high affinity with a Kd about 360 nM, verified by isothermal titration calorimetry (ITC) analysis. In the presence of Cd2+, this aptamer folded into a stem-loop structure, drawing the MB into a close proximity to the electrode surface and generating enhanced current in square wave voltammetry (SWV). Under the optimized conditions, this aptamer sensor enabled us to sensitively detect Cd2+ in a wide concentration range from 0.5 nM to 4 μM, and the detection limit was 90 pM. The developed electrochemical aptasensor has the advantages in easy preparation, rapid response, high stability, high selectivity and easy regeneration and reuse, showing the potential for Cd2+ detection in broad applications.

FeOOH nanosheet assisted metal ion coordination with porphyrins for rapid detection and removal of cadmium ions in water

Excessive cadmium ions in water bodies pose a severe challenge to ecology and human health, and the development of cadmium metal ion sensors is imperative. Here, we showed a dual-signal sensor based on colorimetry and fluorescence that was self-assembled from FeOOH nanosheets and TMPyP4. This nanocomposite enabled quick, selective cadmium ion detection. The Soret band at 442 nm in the UV absorption spectrum represented the coordination of cadmium ions with FeOOH@TMPyP4, and the absorbance increased linearly with increasing cadmium ion concentration (R² = 0.989 and linear range: 0.5-10 μM). In the presence of FeOOH nanosheets, the coordination of cadmium ions with FeOOH@TMPyP4 took only 70 min, and the detection limit of cadmium ions was as low as 0.24 μM. In addition, Cd²⁺ could be effectively removed from the nanocomposite due to its easy separation from water. This research developed a simple and efficient approach for detecting and removing heavy metal ions from water bodies.

Selective detection of cadmium ions using plasmonic optical fiber gratings functionalized with bacteria

Environmental monitoring and potable water control are key applications where optical fiber sensing solutions can outperform other technologies. In this work, we report a highly sensitive plasmonic fiber-optic probe that has been developed to determine the concentration of cadmium ions (Cd²⁺) in solution. This original sensor was fabricated by immobilizing the Acinetobacter sp. around gold-coated tilted fiber Bragg gratings (TFBGs). To this aim, the immobilization conditions of bacteria on the gold-coated optical fiber surface were first experimentally determined. Then, the coated sensors were tested in vitro. The relative intensity of the sensor response experienced a change of 1.1 dB for a Cd²⁺ concentration increase from 0.1 to 1000 ppb. According to our test procedure, we estimate the experimental limit of detection to be close to 1 ppb. Cadmium ions strongly bind to the sensing surface, so the sensor exhibits a much higher sensitivity to Cd²⁺ than to other heavy metal ions such as Pb²⁺, Zn²⁺ and CrO₄^2- found in contaminated water, which ensures a good selectivity.

High sensitivity fiber sensor for measurement of Cd2+ concentration in aqueous solution based on reflective Mach-Zehnder interference with temperature calibration

We propose a novel fiber chemical sensing system based on reflective Mach-Zehnder interference with temperature calibration for the measurement of Cd²⁺ in aqueous solution. The sensing system has high measurement sensitivity of Cd²⁺ with an estimated minimum detection limit of 4×10^-7 mol/L at a spectral resolution of 0.02 nm and with long-term stability. The fiber sensing head is prepared by coating a sensing membrane on a fused tapering single-mode fiber. The thiourea group of the sensing membrane has an effective combination effect on Cd²⁺. Disturbance from ambient temperature fluctuation on the measurement of Cd²⁺ concentration can be eliminated with the fiber Bragg grating.

Determination of Lead in Water Samples by GFAAS after Collection on Montmorillonite with Slurry Introduction

In this study, a highly accurate, fast and practical separation/enrichment technique is described to determine the Pb in tap water samples by graphite furnace atomic absorption spectrometry. For this purpose, at first, Pb was collected on montmorillonite by batch technique, the supernatant was decanted and the solid phase was slurried in a mixture of 0.1% Triton X-114 and 0.1 mol L^-1 HNO₃ then directly introduced into graphite furnace without elution. Since the elution step was not applied, the method was simpler and faster compared to conventional techniques. The risks of elution step on the precision and recovery were eliminated. Up to 50-fold enrichment could be obtained by this method. The limit of detection (3δ, N = 10) and characteristic concentration of the method for Pb were 0.46 and 1.13 μg L^-1, respectively. In addition, the Pb in water samples (tap and river) collected from different regions of Turkey were determined.

Bovine serum albumin-Cu(II) hybrid nanoflowers: An effective adsorbent for solid phase extraction and slurry sampling flame atomic absorption spectrometric analysis of cadmium and lead in water, hair, food and cigarette samples

Herein, the synthesis of bovine serum albumin-Cu(II) hybrid nanoflowers (BSA-NFs) through the building blocks of bovine serum albumin (BSA) and copper(II) ions in phosphate buffered saline (PBS) and their use as adsorbent for cadmium and lead ions are reported. The BSA-NFs, for the first time, were efficiently utilized as novel adsorbent for solid phase extraction (SPE) of cadmium and lead ions in water, food, cigarette and hair samples. The method is based on the separation and pre-concentration of Cd(II) and Pb(II) by BSA-NFs prior to determination by slurry analysis via flame atomic absorption spectrometry (FAAS). The analytes were adsorbed on BSA-NFs under the vortex mixing and then the ion-loaded slurry was separated and directly introduced into the flame AAS nebulizer by using a hand-made micro sample introduction system to eliminate a number of drawbacks. The effects of analytical key parameters, such as pH, amount of BSA-NFs, vortexing time, sample volume, and matrix effect of foreign ions on adsorbing of Cd(II) and Pb(II) were systematically investigated and optimized. The limits of detection (LODs) for Cd(II) and Pb(II) were calculated as 0.37 μg L(-)(1) and 8.8 μg L(-)(1), respectively. The relative standard deviation percentages (RSDs) (N = 5) for Cd(II) and Pb(II) were 7.2%, and 5.0%, respectively. The accuracy of the developed procedure was validated by the analysis of certified reference materials (TMDA-53.3 Fortified Water, TMDA-70 Fortified Water, SPS-WW2 Waste Water, NCSDC-73349 Bush Branches and Leaves) and by addition/recovery analysis. The quantitative recoveries were obtained for the analysis of certified reference materials and addition/recovery tests. The method was successfully applied to the analysis of cadmium and lead in water, food, cigarette and hair samples.

Preparation of graphene oxide-wrapped carbon sphere@silver spheres for high performance chlorinated phenols sensor

A template-activated strategy was developed to construct core/shell structured carbon sphere@silver composite based on one-pot hydrothermal treatment. The CS@Ag possessed a uniform three-dimensional interconnected microstructure with an enlarged surface area and catalytic activity, which was further mechanically protected by graphene oxide (GO) nanolayers to fabricate intriguing configuration, which was beneficial for efficiently preventing the aggregation and oxidation of AgNPs and improving the electrical conductivity through intimate contact. By immobilizing this special material on electrode surface, the CS@Ag@GO was further used for sensitive determination of chlorinated phenols including 2-chlorophenol, 4-chlorophenol, 2,4-dichlorophenol and 2,4,6-trichlorophenol. The tailored structure, fast electron transfer ability and facile preparation of CS@Ag@GO made it a promising electrode material for practical applications in phenols sensing.