Synthesis and toxicity evaluation of hydrophobic ionic liquids for volatile organic compounds biodegradation in a two-phase partitioning bioreactor

Toxicity of ionic liquids in marine and freshwater microorganisms and invertebrates: state of the art

The variety of applications and expected growth in ionic liquid production are raising concerns about the release of these compounds into aquatic systems. Up to date, 103 studies have provided ecotoxicological data regarding the exposure effects of Ionic Liquids towards aquatic microorganisms and invertebrate species: 61 were devoted to freshwater species (n = 28), while marine species (n = 12) were mentioned in 42. The aim of this review, by gathering published studies on ionic liquids and model aquatic organisms, was to present the toxic effects described in distinct species and to understand which are the main factors influencing the toxicity of some ionic liquids. In accordance with the most recognized pattern, freshwater species were featured in a higher number of publications than marine ones. After literature analysis, algal species were the most represented organisms in aquatic toxicity assessments. Among tested compounds, the imidazolium cations in combination with long alkyl-chain anions, showed to be the most toxic one. In analytical terms, it is not straightforward to find the undissociated compound in a natural compartment, as ionic liquids are composed of ionic components, easily subjected to dissociation. Given the aforementioned, the present review paper points out the need of increasing the number of organisms being assessed in ionic liquids toxicity assays, in order to start defining monitoring procedures. Moreover, such would allow a better understanding of ionic liquids contamination status and, also, the opportunity to remark the effectiveness of new in silico methods for the ecotoxicity assessment of this kind of substances.

Preparation and physicochemical characterization of deep eutectic solvents and ionic liquids for the potential absorption and biodegradation of styrene vapors

Styrene emissions can be treated by physicochemical, biological, or physicochemical/biological means. Due to its low solubility in water an alternative to eliminate styrene emissions from air is the use of two-phase partitioning bioreactors (TPPBs) which comprised a hydrophobic non-aqueous phase (NAP) which can improve mass transfer of styrene. This study was devoted to prepare and evaluate the main physicochemical characteristics of novel NAPs such as Ionic liquids (ILs), Deep Eutectic Solvents (DESs) and Natural Deep Eutectic Solvents (NADEs) as well as their toxicity and biodegradability to treat styrene vapors. Absorption experiments of styrene showed that the best NAPs were the DESs formed with Tetrabutylammonium bromide and decanoic acid and the ILs [C₆mim][FAP], [C₄mim] [NTf₂] and [C₄mim] [PF₆], since they presented a styrene partition coefficient between 0.0015 and 0.0041. Finally, the IL [C₆mim][FAP] was used as a NAP in a TPPB batch process given its high styrene affinity, low solubility in water and non-biodegradability; styrene mineralization was three times higher in the TPPB compared with the control. ILs are potential adjuvant phases in biological degradation systems, as well as other solvents like DESs and NADESs.

The Heck reaction of allylic alcohols catalysed by an N-heterocyclic carbene-Pd(ii) complex and toxicity of the ligand precursor for the marine benthic copepod Amphiascoides atopus

The palladium-catalysed reaction of aryl halides and allylic alcohols is an attractive method for obtaining α,β-unsaturated aldehydes and ketones, which represent key intermediates in organic synthesis. In this context, a 1,2,3-triazol-5-ylidene (aNHC)-based palladium(ii) complex formed in situ has been found to be a selective catalyst for the syntheses of building blocks from the corresponding aryl halides and allylic alcohols, with yields ranging from 50% to 90%. The lack of toxic effects of the ligand precursor (1,2,3-triazolium salt) of the palladium(ii) complex for the harpacticoid copepod Amphiascoides atopus allowed us to contrast the efficiency of the catalytic system with the potential impact of the principal waste chemical in global aquatic ecosystems, which has not been previously addressed.

A 1,2,3-triazol-5-ylidene (aNHC)-based palladium(ii) complex formed in situ has been found to be an efficient catalyst in the formation of C–C bonds.

Design of poly ionic liquids modified cotton fabric with ion species-triggered bidirectional oil-water separation performance

A novel ion species-responsive oil-water separation material was designed: poly ionic liquid (PIL) was carried on the graphene oxide (GO) by free radical polymerization, then the PIL modified GO sheets (GO-PIL) were coated on cotton fabric (CF). The wettability of the obtained GO-PIL coated CF (GO-PIL@CF) could be switched between hydrophilic and hydrophobic state with the exchange of different types of counteranions. Water contact angle of the GO-PIL@CF could be switched between 0 to about 145°; and correspondingly the underwater oil contact angle would change between about 148 to 0°. Because of the switchable wettability, the GO-PIL@CF could selectively separate water or oil from the oil-water mixtures. Meanwhile, due to the loose fibrous structure, the GO-PIL@CF showed relatively high permeate fluxes; in the hydrophilic state the water flux was about 36000 L/m²h, while in the hydrophobic state the fluxes for the low-density oils (n-hexane and toluene) were about 59,000 and 65000 L/m²h, respectively. Consequently, the separation processes could be completed simply by gravity. In addition, because of the soft and flexible mechanical property, the GO-PIL@CF could serve as wrappage of traditional absorbents and be applied directly as absorbent to remove water or oil selectively from their mixtures.

Nano ferrites (AFe2O4, A = Zn, Co, Mn, Cu) as efficient catalysts for catalytic ozonation of toluene

Nano ferrites (AFe₂O₄, A = Zn, Co, Mn, Cu) were supported on the surface of γ-Al₂O₃ by hydrothermal synthesis to prepare a series of novel catalysts (AFe₂O₄/γ-Al₂O₃) for catalytic ozonation of high concentration toluene at ambient temperature.

Red pepper peptide coatings control Staphylococcus epidermidis adhesion and biofilm formation

Medical devices (indwelling) have greatly improved healthcare. Nevertheless, infections related to the use of these apparatuses continue to be a major clinical concern. Biofilms form on surfaces after bacterial adhesion, and they function as bacterial reservoirs and as resistance and tolerance factors against antibiotics and the host immune response. Technological strategies to control biofilms and bacterial adhesion, such as the use of surface coatings, are being explored more frequently, and natural peptides may promote their development. In this study, we purified and identified antibiofilm peptides from Capsicum baccatum (red pepper) using chromatography-tandem mass spectrometry, MALDI-MS, MS/MS and bioinformatics. These peptides strongly controlled biofilm formation by Staphylococcus epidermidis, the most prevalent pathogen in device-related infections, without any antibiotic activity. Furthermore, natural peptide-coated surfaces dislayed effective antiadhesive proprieties and showed no cytotoxic effects against different representative human cell lines. Finally, we determined the lead peptide predicted by Mascot and identified CSP37, which may be useful as a prime structure for the design of new antibiofilm agents. Together, these results shed light on natural Capsicum peptides as a possible antiadhesive coat to prevent medical device colonization.

In vitro toxicological evaluation of ionic liquids and development of effective bioremediation process for their removal

The present study deals with the cyto-genotoxicological impact of ionic liquids, 1-butyl-3-methylimidazolium bromide, trihexyl tetradecylphosphonium dicyanamide, 1-decyl-3-methylimidazolium tetrafluoroborate, benzyldimethyltetradecylammonium chloride, and 1-butyl-4-methylpyridinium chloride, on animal cells and their biodegradation. The long alkyl chain containing ionic liquids were found to be more toxic whereas benzene functional group in benzyldimethyltetradecylammonium chloride enhances its toxicity. Aerobic bacterial granules, a bacterial consortium, were developed that have promising ability to break down these organic pollutants. These aerobic bacterial granules have been applied for the biodegradation of ionic liquids. The biological oxygen demand (5 days) and chemical oxygen demand parameters confirmed that the biodegradation was solely due to aerobic bacterial granules which further decreased the time period needed for regular biodegradation by biological oxygen demand (28 days). The high resolution mass spectrometry analysis further approved that the degradation of ionic liquids was mainly via removal of the methyl group. Elevated N-demethylase enzyme activity supports the ionic liquids degradation which may be occurring through demethylation mechanism. The amplicon sequencing of aerobic bacterial granules gives insight into the involvement of the bacterial community in the biodegradation process.

Selective adsorption and bioavailability relevance of the cyclic organics in anaerobic pretreated coal pyrolysis wastewater by lignite activated coke

This study originally investigated the selective adsorption of cyclic organics in APCPW by LAC, corresponding to the change of the bioavailability. As a product from low rank coal, LAC showed more oxygen (O)-containing groups and mesoporous structure than PAC. Adsorption mechanisms were analyzed by equilibrium isotherms and kinetics models combined with physicochemical properties of adsorbent and adsorbates. The results indicated that selectivity of LAC was dominated by chemical interaction and its mesoporous, and was enhanced by hydrophobicity of adsorbates. In addition, PAC and LAC were applied for the treatment of APCPW. Compared with PAC, LAC adsorption exhibited superior removal efficiency of Tph, TOC and TN at 85.90%, 91.15% and 51.64%, respectively. Furthermore, preferential adsorption of biotoxic and bioresistant cyclic organics by LAC was further proved by GC-MS analysis, resulting in increased bioavailability of APCPW. Specifically, LAC exerted sustained detoxication capacity until 86.50% reduction of TU by D. magna evaluation, and lowered toxicity rank (TU = 4.51, classIII) to T. pyriformis than that after PAC adsorption (TU > 10, ClassIV). Meanwhile, biodegradability was also improved by 9.17% after LAC adsorption. Lastly, LAC would exhibit great economic benefits as an alternative for PAC in subsequent process after anaerobic pretreatment.

Assessment the ecotoxicity and inhibition of imidazolium ionic liquids by respiration inhibition assays

The ecotoxicity and inhibition of 12 imidazolium ionic liquids (ILs) with alkyl chain from C4 to C10 and chloride (Cl^-), tetrafluoroborate (BF₄^-) and bis(trifluoromethanesulfonyl)imide (NTf₂^-) anions have been studied by means of respiration inhibition assays using activated sludge collected from a wastewater treatment plant. This test represents an alternative easy, economic and quick way to evaluate the true impact of ILs on activated sludge-based wastewater treatment. For comparison purposes, the EC₅₀ values were also determined by the Microtox test (Vibrio fischeri). It was observed that this widely used microbial test overestimates the effect of the ILs on biological wastewater treatment facilities, especially in the case of ILs with lower ecotoxicity. The results of the biological tests showed that the alkyl chain length plays a crucial role in the ecotoxicity of ILs. A significant increase of the toxicity with the length of the n-alkyl chain was found. Regarding to the impact of the anion, the ecotoxicity measured by respiration inhibition assays follows the order NTf₂^- > Cl^- > BF₄^-, being the anion effect higher as decreasing the length of cation alkyl chain. According to the hazard substances ranking for aquatic organisms (Passino and Smith, 1987), imidazolium ILs with C4 alkyl chain can be classified as "practically harmless" compounds whereas those with alkyl chains C8 or C10 correspond to "highly toxic" species.

Anion-Responsive Poly(ionic liquid)s Gating Membranes with Tunable Hydrodynamic Permeability

Novel anion-responsive "intelligent" membranes with functional gates are fabricated by filling polyethersulfone microporous membranes with poly(ionic liquid)s (PILs) gels. The wetting properties of the PILs could be controlled by changing their counteranions (CAs), and thus, the filled PILs gel gates in the membrane pores could spontaneously switch from the "closed" state to the "open" one by recognizing the hydrophilic CAs in the environment and vice versa. As a result, the fluxes of the "intelligent" membranes could be tuned from a very low level (0 mL/m²·mmHg for Cl^-, Br^-, and BF₄^-) to a relatively high one (430 mL/m²·mmHg for TFSI). The anion-responsive gating behavior of the PILs filled membranes is fast, reversible, and reproducible. In addition, the "intelligent" membranes are sensitive to contact time and ion concentrations of the hydrophobic CA species. The proposed anion-responsive "intelligent" membranes are highly attractive for ion-recognizable chemical/biomedical separations and purifications.