Carbon nanoparticles for solar disinfection of water

Solar disinfection (SODIS) technologies as alternative for large-scale public drinking water supply: Advances and challenges

Gastrointestinal waterborne diseases, continue to stand out among the most lethal diseases in developing countries, because of consuming contaminated water taken from unsafe sources. Advances made in recent decades in methods of solar water disinfection (SODIS) have shown that SODIS is an effective and inexpensive method of providing drinking water, capable of substantially reducing the prevalence and mortality of waterborne diseases. The increased impact of SODIS in communities lacking drinking water services depends on a successful upgrade from conventional SODIS (based on PET bottle reactors) in high flow continuous flow systems for solar water disinfection (CFSSWD). This review aimed to identify the main limitations of conventional SODIS that hinder its application as a large-scale drinking water supply strategy, and to propose ways to overcome these limitations (without making it economically inaccessible) based on the current frontier of advances technological. It was found that the successful development of the CFSSWD depends on overcoming the current limitations of conventional SODIS and the development of systems whose configurations allow combining the properties of solar pasteurization (SOPAS) and SODIS. Different improvements need to be made to the main components of the CFSSWD, such as increasing the performance of solar radiation collectors, photo and thermal reactors and heat exchangers. The integration of disinfection technologies based on photocatalytic and photothermal nanomaterials also needs to be achieved. The performance evaluation of the CFSSWD should be made considering resistant microorganisms, such as the environmental resistance structures of bacteria or protozoa (spores or (oo)cysts) as targets of disinfection approaches.

Insights into Solar Disinfection Enhancements for Drinking Water Treatment Applications

Poor access to drinking water, sanitation, and hygiene has always been a major concern and a main challenge facing humanity even in the current century. A third of the global population lacks access to microbiologically safe drinking water, especially in rural and poor areas that lack proper treatment facilities. Solar water disinfection (SODIS) is widely proven by the World Health Organization as an accepted method for inactivating waterborne pathogens. A significant number of studies have recently been conducted regarding its effectiveness and how to overcome its limitations, by using water pretreatment steps either by physical, chemical, and biological factors or the integration of photocatalysis in SODIS processes. This review covers the role of solar disinfection in water treatment applications, going through different water treatment approaches including physical, chemical, and biological, and discusses the inactivation mechanisms of water pathogens including bacteria, viruses, and even protozoa and fungi. The review also addresses the latest advances in different pre-treatment modifications to enhance the treatment performance of the SODIS process in addition to the main limitations and challenges.

Investigation of Hybrid Methods for Elimination of Brilliant Blue Dye from Water Phase Using Various Nanomaterials Combined with Activated Sludge and Duckweed

The main goal of this experimental work is screening of different natural and synthetic nanomaterials and biopolymers that may improve elimination of stable micropollutants from water phase. In this work, as a target chemical acting as the micropollutant molecule, the Brilliant Blue (BB) dye was selected. We tested different active matrices dispersed in water phase including activated carbon (AC), lyophilized graphene oxide (GO), β-cyclodextrin (CD), raw dandelion pappus (DP), microcrystalline cellulose(MC), and raw pine pollen (PP), as well as two types of Egyptian Blue mineral pigments (EB1 and EB2). Graphene oxide and Egyptian Blue nanomaterials were synthesized in our laboratory. We investigated potential application of such nanoparticles and biopolymer conglomerates as additives that may tune the activated sludge (AS) microorganisms or duckweed water plant (DW) and increase efficiency of micropollutants removal from wastewater. Studied nanomaterials/biopolymers were used in two different experimental modes involving real activated sludge microorganisms (24 h experiment) as well as duckweed plant (16 day experiment). Quantitative data of BB were obtained using microfluidic type device based on micro-TLC plate. This approach enabled direct determination of target component without sample pre-treatment like pre-concentration or pre-purification. Within single analytical run calibration line, retention standard spots (methyl red) and multiple samples were analyzed simultaneously. Due to the multivariate nature of these experiments, quantitative data were explored with chemometric tools including AHC (agglomerative hierarchical clustering), PCA (principal component analysis), and FA (factor analysis). Experimental data and multivariate calculations revealed that BB is strongly resistant on biodegradation, however, inclusion complexes formation with β-cyclodextrinmay induce degradation of this dye in the presence of duckweed. It is hoped that results of our experimental work can be used for designing of future experiments for fast screening of different additives and improvement of technological processes, focusing on purification of sewage and water from micropollutants.

Developments in the Application of Nanomaterials for Water Treatment and Their Impact on the Environment

Nanotechnology is an uppermost priority area of research in several nations presently because of its enormous capability and financial impact. One of the most promising environmental utilizations of nanotechnology has been in water treatment and remediation where various nanomaterials can purify water by means of several mechanisms inclusive of the adsorption of dyes, heavy metals, and other pollutants, inactivation and removal of pathogens, and conversion of harmful materials into less harmful compounds. To achieve this, nanomaterials have been generated in several shapes, integrated to form different composites and functionalized with active components. Additionally, the nanomaterials have been added to membranes that can assist to improve the water treatment efficiency. In this paper, we have discussed the advantages of nanomaterials in applications such as adsorbents (removal of dyes, heavy metals, pharmaceuticals, and organic contaminants from water), membrane materials, catalytic utilization, and microbial decontamination. We discuss the different carbon-based nanomaterials (carbon nanotubes, graphene, graphene oxide, fullerenes, etc.), and metal and metal-oxide based nanomaterials (zinc-oxide, titanium dioxide, nano zerovalent iron, etc.) for the water treatment application. It can be noted that the nanomaterials have the ability for improving the environmental remediation system. The examination of different studies confirmed that out of the various nanomaterials, graphene and its derivatives (e.g., reduced graphene oxide, graphene oxide, graphene-based metals, and graphene-based metal oxides) with huge surface area and increased purity, outstanding environmental compatibility and selectivity, display high absorption capability as they trap electrons, avoiding their recombination. Additionally, we discussed the negative impacts of nanomaterials such as membrane damage and cell damage to the living beings in the aqueous environment. Acknowledgment of the possible benefits and inadvertent hazards of nanomaterials to the environment is important for pursuing their future advancement.

Effect of the supramolecular interactions on the nanostructure of halloysite/biopolymer hybrids: a comprehensive study by SANS, fluorescence correlation spectroscopy and electric birefringence

The structural properties of halloysite/biopolymer aqueous mixtures were firstly investigated by means of combining different techniques, including small-angle neutron scattering (SANS), electric birefringence (EBR) and fluorescence correlation spectroscopy (FCS). Among the biopolymers, non-ionic hydroxypropylcellulose and polyelectrolytes (anionic alginate and cationic chitosan) were selected. On this basis, the specific supramolecular interactions were correlated to the structural behavior of the halloysite/biopolymer mixtures. SANS data were analyzed in order to investigate the influence of the biopolymer adsorption on the halloysite gyration radius. In addition, a morphological description of the biopolymer-coated halloysite nanotubes (HNTs) was obtained by the simulation of SANS curves. EBR experiments evidenced that the orientation dynamics of the nanotubes in the electric field is influenced by the specific interactions with the polymers. Namely, both variations of the polymer charge and/or wrapping mechanisms strongly affected the HNT alignment process and, consequently, the rotational mobility of the nanotubes. FCS measurements with fluorescently labeled biopolymers allowed us to study the aqueous dynamic behavior of ionic biopolymers after their adsorption onto the HNT surfaces. The combination of EBR and FCS results revealed that the adsorption process reduces the mobility in water of both components. These effects are strongly enhanced by HNT/polyelectrolyte electrostatic interactions and wrapping processes occurring in the halloysite/chitosan mixture. The attained findings can be useful for designing halloysite/polymer hybrids with controlled structural properties.

Plasmonics driven engineered pasteurizers for solar water disinfection (SWADIS)

Rampant environmental pollution is the most ubiquitous concern of current world. A sustainable panacea to overarching contamination of water-borne pathogens demands cheap and eco-friendly oriented research. Solar energy is effortlessly accessible in most of the weather conditions and can be used for water decontamination. In this context, Solar Water Disinfection (SWADIS) appears to be feasible solution. Herein we are reporting newly developed Carbon nanoparticles (CNP) which shows absorption of light in broad region extending from Ultraviolet-Visible (UV) to Infrared Spectroscopy (IR). This CNP with pronounced photothermal effect has been used for SWADIS. Photothermal effect of plasmonic nanomaterials has massive potential and has exploited for disinfection of water. Moving towards practical device design we have developed an efficient CNP based Multipurpose Solar Pasteurizer (MSP) and Nano-Solar Pasteurizer (NSP) which can efficiently perform the SWADIS. Result shows that upon irradiation under natural solar radiation pasteurizers can thermally inactivate the bacteria. The system proves to be able to perform 100% bacterial inactivation in sunny days. We also conducted bacterial inactivation experiments by simulating 106 CFU mL^-1 concentration of E. coli in water to mimic field conditions. Results are evident that pasteurizers achieved 100% bacterial inactivation within period of ˜45 min under sunlight.

Enhanced antibacterial profile of nanoparticle impregnated cellulose foam filter paper for drinking water filtration

Filtration is a promising water treatment method to purify drinking water. To develop highly efficient drinking water filter paper, water-resistant cellulose foam paper with a high wet strength property was fabricated using diverse metal oxide (e.g., copper oxide (CuO), zinc oxide (ZnO), and silver oxide (Ag₂O)) nanoparticles. These nanoparticles were synthesized using the hydrothermal reaction method. Their morphological structures were studied using a field emission scanning electron microscope (FESEM). The presence of coated nanoparticles on the cellulose foam filter was verified by energy dispersive X-ray spectroscopy (EDX) methods. The antibacterial performance of different types of modified cellulose foam filters was studied against E. coli, P. aeruginosa, B. subtilis, and B. cereus strains using the zone of inhibition test. The antibacterial profile of the cellulose foam filter impregnated with Ag₂O nanoparticles, when tested against different types of bacteria, exhibited higher antibacterial activity than the cellulose foam filter impregnated with ZnO and CuO nanoparticles.