A hierarchical structured steel mesh decorated with metal organic framework/graphene oxide for high-efficient oil/water separation

Preparation of multifunctional PET membrane and its application in high-efficiency filtration and separation in complex environment

Nowadays, effluent treatment is a severe challenge mainly because of its complex composition, which includes oil, heavy metal ions, and dyes. Developing new intelligent membranes is one of the strategies to tackle these significant challenges in wastewater treatment. In this study, we fabricated asymmetric polyethylene glycol terephthalate (PET) membranes by grafting cross-linked poly (itaconic anhydride) (CL-PITA) nanoparticles onto the irradiated face. These nanoparticles were then functionalized with polyethyleneimine (PEI) and protonated with HCl to introduce numerous active electropositive amine groups. The fundamental purpose was to increase surface roughness, introduce numerous hydrophilic groups, and modify it to create a multi-functional PET membrane to separate complex environments. The promising results demonstrated that the protonated PET-g-ITA/DVB(10)-cat membrane exhibited excellent separation efficiencies (SE) for water/light oil, water/heavy oil and oil-in-water (O/W) emulsion. Compared to PET-g-ITA/DVB(0)-cat, it showed superior performance in SE for O/W emulsion and flux decay for water/light oil after 10 cycles. More interestingly, owing to numerous positively charged active amino groups and negativley charged carboxylate groups, the intelligent membrane exhibited a high removal rate of ca. 90 % for anionic dye (congo red) and heavy metals (Cu2+ and Co2+), showing great potential in complex water treatment environments.

Fabrication of a Janus Copper Mesh by SiO2 Spraying for Unidirectional Water Transportation and Oil/Water Separation

Massive discharge of oily wastewater and frequent occurrence of offshore oil spills have posed an enormous threat to the socioeconomic and ecological environments. Janus membranes with asymmetric wettability properties have great potential for oil/water separation applications and have attracted widespread attention. However, existing Janus membranes still suffer from complex and costly manufacturing processes, low permeability, and poor recyclability. Herein, a novel and facile strategy was proposed to fabricate a Janus copper mesh with opposite wettability for unidirectional water transport and efficient oil/water separation. The hydrophilic side of the Janus copper mesh was prepared by coating it with Cu(OH)2 nanoneedles via a chemical oxidation method. The hydrophobic side was fabricated by coating it with hydrophobic SiO2 nanoparticles via a facile spraying method. The as-prepared Janus copper mesh showed asymmetric surface wettability, which can achieve unidirectional water transport and efficient oil/water separation with excellent recyclability, exhibiting great application potential for droplet manipulation and wastewater purification.

Facile, green and scalable preparation of low-cost PET-PVDF felts for oil absorption and oil/water separation

3D felt materials with pore structures have the advantages of high absorption performance and recyclability in oily wastewater treatment and chemical leakage. However, most of them were fabricated using either toxic organic solvents or complicated procedures. Herein, we report a facile, green, and scalable route for the fabrication of 3D composite felts with large pore structures by sequentially stirring and heating polyethylene terephthalate (PET) fibers and polyvinylidene fluoride (PVDF). The resulting PET-PVDF felt exhibits high oil absorption capacity to a variety of oil and organic solvents with a maximum saturated absorption capacity of 32 g/g. Additionally, it can be used to separate oil/water mixtures with a separation efficiency of 99.9% and separation flux of 89570 L m^-2 h^-1. Moreover, this felt shows excellent mechanical durability and chemical stability under acid, base, salt solution, and other harsh environments. The current study provides a promising approach for large-scale industrial oily wastewater separation.

Graphene-Based Metal-Organic Framework Hybrids for Applications in Catalysis, Environmental, and Energy Technologies

Current energy and environmental challenges demand the development and design of multifunctional porous materials with tunable properties for catalysis, water purification, and energy conversion and storage. Because of their amenability to de novo reticular chemistry, metal-organic frameworks (MOFs) have become key materials in this area. However, their usefulness is often limited by low chemical stability, conductivity and inappropriate pore sizes. Conductive two-dimensional (2D) materials with robust structural skeletons and/or functionalized surfaces can form stabilizing interactions with MOF components, enabling the fabrication of MOF nanocomposites with tunable pore characteristics. Graphene and its functional derivatives are the largest class of 2D materials and possess remarkable compositional versatility, structural diversity, and controllable surface chemistry. Here, we critically review current knowledge concerning the growth, structure, and properties of graphene derivatives, MOFs, and their graphene@MOF composites as well as the associated structure-property-performance relationships. Synthetic strategies for preparing graphene@MOF composites and tuning their properties are also comprehensively reviewed together with their applications in gas storage/separation, water purification, catalysis (organo-, electro-, and photocatalysis), and electrochemical energy storage and conversion. Current challenges in the development of graphene@MOF hybrids and their practical applications are addressed, revealing areas for future investigation. We hope that this review will inspire further exploration of new graphene@MOF hybrids for energy, electronic, biomedical, and photocatalysis applications as well as studies on previously unreported properties of known hybrids to reveal potential "diamonds in the rough".

Hygroscopic ramie fabrics for recovering highly viscous low sulfur fuel oil

Low sulfur fuel oils (LSFOs) with less than 0.5% sulfur content have been mandated for marine vessels by the International Maritime Organization since 2020. However, owing to the low dispersibility and high viscosity of LSFOs, their oceanic spills are difficult to clean using conventional response systems. In this study, we propose a superhydrophilic and hygroscopic ramie to clean spilled LSFO. To this end, a raw ramie fiber, which is intrinsically hydrophobic, was treated using a mild alkali to remove its waxy, rough, and gummy veneer and reveal a smooth surface. This substantially improved its hygroscopic nature, superhydrophilicity, and water-retention, while preserving its mechanical durability in dry and wet environments. The hygroscopic ramie exhibited underwater superoleophobicity and self-cleaning abilities against highly adhesive LSFOs. Two proofs-of-concept are demonstrated in this study-an oil-proof glove for maximizing oil repellency and a direct oil-scooping device for simple and continuous recovery of spilled oil with high efficiency.

A super-hydrophilic partially reduced graphene oxide membrane with improved stability and antibacterial properties

In order to improve stability and antibacterial property, a novel super-hydrophilic partially reduced graphene oxide membrane was prepared by interfacial polymerization of piperazine and partially reduced graphene oxide as aqueous solution and trimesoyl chloride as organic solution. Fourier transform infrared spectroscopy, scanning electron microscope, and contact angle measurement were conducted to probe the morphology and properties of the membranes. The modified membrane possessed super-hydrophilicity, improved durability and swelling resistance. The optimized membrane had a molecular weight cut off of about 674 Da and possessed a pure water permeability of 49.86 L·m^-2·h^-1·MPa^-1. The retention order of salts was Na₂SO₄ > MgSO₄ > MgCl₂ > Na₂CO₃ > CaCl₂ > NaCl, while the rejection for four kinds of pharmaceuticals followed the order of ibuprofen (92%) > carbamazepine (87%) > amlodipine (80%) > atenolol (76%), indicating that the negatively charged membrane could improve the retention performance by the electrostatic repulsive effect. Moreover, the enhanced antibacterial performance of membrane attributed to the dual effects of the super-hydrophilicity and the tea polyphenols antibacterial material loading, which may alter the charge distribution on and within the membrane, leading to loss of cell viability.

Preparation of Pebax 1657/MAF-7 Mixed Matrix Membranes with Enhanced CO2/N2 Separation by Active Site of Triazole Ligand

Fillers play a critical role in the performance of mixed matrix membranes (MMMs). Microporous metal azolate frameworks (MAFs) are a subclass material of metal-organic frameworks (MOFs). Due to the uncoordinated nitrogen of the organic ligands, MAF-7 (SOD-[Zn(mtz)₂], Hmtz = 3-methyl-1,2,4-triazole, window: d = 0.34 nm) shows excellent CO₂ adsorption performance. In this work, Pebax 1657/MAF-7 MMMs were prepared by a sample solution casting method with MAF-7 particles as fillers for the first time. By means of X-ray diffraction (XRD), scanning electron microscope (SEM), infrared radiation (IR), and thermogravimetry (TG), the compositional and structural properties of the mixed matrix membrane with different filler content were analyzed. The results show that the compatibility of MAF-7 and Pebax is good with a filler content of 5 wt.%. The pure gas testing showed that mixed matrix membrane has a high ideal CO₂/N₂ selectivity of 124.84 together with a better CO₂ permeability of 76.15 Barrer with the optimized filler content of 5 wt.%. The obtained membrane showed 323.04% enhancement in selectivity of CO₂/N₂ and 27.74% increase in the permeability of CO₂ compared to the pristine membrane at 25 °C and 3 bar. The excellent separation performance may be due to the ligands that can afford a Lewis base active site for CO₂ binding with the uniform dispersion of MAF-7 particles in Pebax and the favorable interface compatibility. The obtained membrane overcomes the Robeson's upper bound in 2008 for CO₂/N₂ separation. This work provides a new strategy by utilizing MAFs as fillers with triazole ligand to enhance the gas separation performance of mixed matrix membranes.

Converting Complex Sewage Containing Oil, Silt, and Bacteria into Clean Water by a 3D Printed Multiscale and Multifunctional Filter

The exacerbating water pollution and water resource shortage pose a great danger to human health and make it imperative to recycle and treat the sewage. In this study, a direct-writing three-dimensional (3D) printing technology was adopted to prepare a 3D sodium alginate (SA)/graphene oxide (GO)/Ag nanoparticle (AgNP) aerogel (SGA), aiming to turn the complex sewage containing oil, silt, and bacteria into clean water depending only on gravity separation. The physicochemical properties and surface structure of the synthesized SGA were characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The swelling rate, mechanical properties, antibacterial properties, oil and water separation effect, and durable stability of the filter membrane were also investigated to verify the versatility of the SGA filter. The results showed that GO helped improve the mechanical properties of the printed filter to withstand water impact during the filtration process. The printed filter had a well-designed and multiscale gradient pore structure, which can effectively intercept particles with different sizes to separate the silt from water, and the turbidity of the filtered water can be reduced from 60 to 1 nephelometric turbidity unit (NTU). The presence of SA endowed the printed filter with hydrophilic and oleophobic behaviors, which can effectively separate various kinds of oils from water. The uniform distribution of AgNPs in the filter produced via a facile and green reduction of SA facilitated the efficient bactericidal ability of the printed filter during the filtration process; meanwhile, the lower release concentration of Ag ions ensured drinking safety. What is more, the filter can be easily produced on a large scale and used for different sewage treatment situations with a durable stability of over 30 days. Taken together, the printed SGA filter has a broad application prospect in complex sewage treatment, providing a special solution for sewage treatment in poverty areas.

Reusable membrane with multifunctional skin layer for effective removal of insoluble emulsified oils and soluble dyes

The organic pollutants, typical of emulsified oils and soluble organic dyes, is commonly found in wastewater, however simultaneous removal of them remains challenging because of their difference in surface charge, molecule size, and solubility in water. Inspired by the water purification of the earth's multilayer strata, a fibrous membrane with multifunctional skin is fabricated by coupling sub-micrometer pores layer of polyaniline (PANI) and nano molecular brush of polyacrylic acid (PAA)/polyethyleneimine (PEI) on polyacrylonitrile membrane, for cross-scale organic pollution/water separation. This ultrathin skin of PANI/PAA/PEI is endowed with sub-micrometer pores and strong hydration, which can effectively prevent tiny oil droplets from entering or adhering the membrane pores. Furthermore, this skin with double electric layer can selectively adsorb and even filtrate anionic/cationic dyes by protonation and deprotonation effect in different pH solutions. The synergy of these features enables this membrane with ultra-high water flux (>3000 L m^-2 h^-1 bar^-1), oil rejection rates (>99.6%), and anionic/cationic dyes adsorbability (>49.1 mg/g). Besides, the membrane also exhibits desirable reusability, excellent mechanical durability and outstanding acid/alkali resistance, promising for removal of insoluble emulsified oils and soluble organic dyes in wastewater.

Water stable graphene oxide metal-organic frameworks composite (ZIF-67@GO) for efficient removal of malachite green from water

Malachite green (MG) is extensively applied in aquaculture worldwide as a therapeutic agent. MG and its primary metabolite leucomalachite green (LMG) are commonly detected in aquaculture products. MG can cause serious health concerns (in vivo carcinogenic/genotoxic). The extensive water solubility of MG leads to water pollution and hence it is mandatory to remove MG from water. The current study explores adsorptive removal of MG from water using highly water stable Zeolitic Imidazolate framework/graphene oxide composites (ZIF-67@GO). Adsorption performance of newly synthesized composites is justified for MG removal with excellent results of pseudo second order (R² = 0.99955) which is well-fitted in this case. ZIF-67@GO data of adsorption isotherm for MG is observed using Freundlich Model (R² = 0.99999) and with adsorption capacity value observed (134.79 mg/g) with removal efficiency of 99.18%, indicates π-staking and electrostatic association between ZIF-67@GO and MG molecules. Synthesized material has retained reusability while removal efficiency reduced only by 6% after many cycles. Furthermore, factors effecting absorption like contact time, pH, adsorbent dose and quantity and temperature are also determined.

Sorbent-based devices for the removal of spilled oil from water: a review

Always, oil spills do cause serious and dire consequences for the environment, nature, and society that it consumes much time and socio-economic resources to overcome such consequences. Oil spills, hence, posed a big challenge in searching the advanced technologies and devices to recover spilled oil rapidly and efficiently. Indeed, sorbents have been found to play an extremely critical role in the spilled-oil remediation processes. Recently, a large number of various advanced sorbents and sorbent-based oil-collecting devices/technologies have been developed to enhance the oil-recovery capacity. Therefore, it is necessary to have a comprehensive assessment of the application of sorbent-based oil-collecting devices/technologies in recovering spilled oil. Due to this reason, this paper aims to provide a comprehensive review of the advanced technologies of the combination of sorbents and oil-collecting devices in the oil cleanup strategies. Two main oil-collecting devices such as booms and skimmers that could conjunct with sorbents were critically evaluated on the basis of the applicability and technological features, indicating that the capacity of oil spill recovery could achieve 90%. Moreover, oil-storage and oil-collecting devices were also completely mentioned. Last but not least, technical directions, concerns over the application of sorbents in oil recovery, and existing challenges relating to storage, transport, and disposal of used sorbents were discussed in detail. In the future, the automatic process of spilled oil recovery with the conjunction between advanced devices and environmentally friendly high-efficiency sorbents should be further investigated to minimize the environmental impacts, reduce the cost, as well as maximize the collected oil spill.

Robust Graphene@PPS Fibrous Membrane for Harsh Environmental Oil/Water Separation and All-Weather Cleanup of Crude Oil Spill by Joule Heat and Photothermal Effect

The cleanup of oily wastewater and crude-oil spills is a global challenge. Traditional membrane materials are inefficient for oil/water separation under harsh conditions and limited by sorption speeds because of the high viscosity of crude oil. Herein, a kind of Graphene-wrapped polyphenylene sulfide fibrous membrane with superior chemical resistance and hydrophobicity for efficient oil/water separation and fast adsorption of crude oil all-weather is reported. The reduced graphene oxide (rGO)@polyphenylene sulfide (PPS) fibrous membrane can be applied in the various harsh conditions with Joule heating and solar heating. In addition, the oil(dichloromethane)/water separation flux of rGO@PPS reached 12 903 L m^-2h^-1, and the separation efficiency reached 99.99%. After 10 cycles, the rGO@PPS still performed high separation flux and filtration efficiency. More importantly, the rGO@PPS still retained its high conductivity, excellent filtration efficiency, and stable hydrophobicity after acid or alkali treatment. Moreover, the rGO@PPS can be heated by solar energy to absorb viscous crude oil during the day, while at night, the crude oil can be adsorbed by Joule heating. The time to adsorb crude oil can be reduced by 98.6% and 97.3% through Joule heating and solar heating, respectively. This all-weather utilization greatly increases the adsorption efficiency and effectively reduces energy consumption.

Dual-functional membrane decorated with flower-like metal-organic frameworks for highly efficient removal of insoluble emulsified oils and soluble dyes

High-performance membranes for simultaneously removing insoluble emulsified oils and soluble organic dyes are in urgently demand for industrial wastewater treatment, but are strictly limited by the single-function and serious fouling problem. Herein, a dual-functional membrane with excellent antifouling ability for efficiently dye/oil/water emulsion separation has been fabricated by growing flower-like metal-organic frameworks (MIL-53-OH) on polyacrylonitrile/polyethyleneimine membrane for the first time. The synergistic effect of the hierarchical flower-like structure and superhydrophilic compositions with high hydration ability endows the obtained membrane with a stable and ultra-strong oil-repelling hydration layer, thus imparting the membrane formidable oil resistance and exceptional oil/water emulsion separation performance (permeate flux>4000 L m^-2 h^-1). What's more, the superhydrophilic compositions render the membrane an excellent dye remove capacity by electrostatic forces and hydrogen bonding. The membrane rejections for dyes and emulsified oils are above 99%, and the dyes and oils on the used membrane can be easily washed away with methanol and water, respectively, confirming that the membrane has desirable recyclability. Besides, the membrane possesses excellent mechanical performance and outstanding acid and alkali resistance, indicating that the membrane is a promising candidate for removing insoluble emulsified oils and soluble dyes.

Flocculation of emulsified oily wastewater by using functional grafting modified chitosan: The effect of cationic and hydrophobic structure

In this work, modified chitosan flocculants (MCS) was synthesized by using chitosan (CS), acrylamide, cationic monomers and hydrophobic monomers via low-pressure UV-initiated copolymerization. The flocculation performance of MCS was evaluated in emulsified oily wastewater treatment. The effect of cationic and hydrophobic structure on oil removal was studied, and the interactions between these functional groups and the components in oil were also analyzed. Results suggested that MCS flocculants exhibited excellent oil removal efficiency in a wide pH range (2.0‒10). The flocculation efficiency of 91 % was achieved at the dosages of 0.6 mL/L (6 mg/L). During pH of 2.0-10, the optimal cationic and hydrophobic monomer was DMC and VT, respectively. Silane groups were favorable for oil removal than the other hydrophobic structures. The cationic groups expanded the optimal pH range of MCS in flocculation, whereas hydrophobic groups considerably reduced the dosage of MCS. The experimental results showed that alkane, cyclic aromatic hydrocarbon compounds in oil can be easily removed by using MC4, whereas cycloalkanes compounds was effectively removed by MC6 and MC7 because of preferable demulsification capacity, and the hydrophobic interaction, interfacial adsorption and electrostatic attraction played the dominant in flocculation. Thus, the synthesized MCS is favorable for emulsified oily wastewater treatment.

MOF based engineered materials in water remediation: Recent trends

The significant upsurge in the demand for freshwater has prompted various developments towards water sustainability. In this context, several materials have gained remarkable interest for the removal of emerging contaminants from various freshwater sources. Among the currently investigated materials for water treatment, metal organic frameworks (MOFs), a developing class of porous materials, have provided excellent platforms for the separation of several pollutants from water. The structural modularity and the striking chemical/physical properties of MOFs have provided more room for target-specific environmental applications. However, MOFs limit their practical applications in water treatment due to poor processability issues of the intrinsically fragile and powdered crystalline forms. Nevertheless, growing efforts are recognized to impart macroscopic shapability to render easy handling shapes for real-time industrial applications. Furthermore, efforts have been devoted to improve the stabilities of MOFs that are subjected to fragile collapse in aqueous environments expanding their use in water treatment. Advances made in MOF based material design have headed towards the use of MOF based aerogels/hydrogels, MOF derived carbons (MDCs), hydrophobic MOFs and magnetic framework composites (MFCs) to remediate water from contaminants and for the separation of oils from water. This review is intended to highlight some of the recent trends followed in MOF based material engineering towards effective water regeneration.

Advanced Materials with Special Wettability toward Intelligent Oily Wastewater Remediation

Clean water resources are essential to our human society. Oil leakage has caused water contamination, which leads to serious shortage of clean water, environmental deterioration, and even increasing number of deaths. It is of great urgency to solve the oil-polluted water problems worldwide. Efficient oil/water separation, especially emulsified oil/water mixture separation, is widely used to mitigate water pollution issues. Recently, advanced materials with special wettability have been employed for oily wastewater remediation. Moreover, by endowing them with various intelligent functions, smart materials can effectively separate complex oil/water mixtures including extremely stable emulsions. In this review, oil/water separation mechanisms and various fabrication methods of special wettability separation materials are summarized. We highlight the special wettable materials with intelligent functions, including photocatalytic, self-healing, and switchable oil/water separation materials, which can achieve self-cleaning, self-healing, and efficient oily wastewater treatment. In each section, the acting mechanisms, fabricating technologies, representative studies, and separation efficiency are briefly introduced. Lastly, the challenges and outlook for oil/water separation based on the special wettability materials are discussed.

Highly-efficient, Rapid and continuous separation of surfactant-stabilized Oil/Water emulsions by selective under-liquid adhering emulsified droplets

Anti-adhesion is considered to be the basis for oil/water separation. However, this principle may not the superior choice for surfactant-stabilized oil/water emulsions owing to the inevitable adhesion of surfactant on the membrane, resulting in further adhesion of emulsified droplets and therefore attenuation in separation performance. Herein, we demonstrated a novel separation strategy for surfactant-stabilized oil/water emulsions by exploiting rather than preventing adhesion. A modified filter paper (mFP) with strong under-liquid adhesion to emulsified droplets was prepared, endowing it excellent separation performance for both surfactant-stabilized and surfactant free emulsions with very high separation efficiency (up to 99.9 %). Furthermore, the Random layer stacked scraps of mFP (RLS-mFP) were used to construct the separation device, which provided a labyrinthine but unobstructed flow path for emulsion because of the randomly stacked form and relatively large interspace among mFP scraps. The RLS-mFP has excellent separation performance with the separation flux for surfactant-stabilized oil-in-water and water-in-oil emulsions achieving 1035 and 3570 L m^-2 h^-1 respectively only under gravity. After 1-hour continuous separation, both flux and separation efficiency of RLS-mFP showed almost no decline comparing to initial flux for surfactant-stabilized emulsions. Meanwhile, the mFP could be easily recycled by rinsing and reused at least 50 times without sacrificing separation performance.

Bioinspired Anti-Oil-Fouling Hierarchical Structured Membranes Decorated with Urchin-Like α-FeOOH Particles for Efficient Oil/Water Mixture and Crude Oil-in-Water Emulsion Separation

Designing and constructing a stable water-retention layer acting as the isolation between the oil and membrane surface holds great significance for solving the membrane fouling problems in oil/water separation, including common layered oil/water mixtures, immiscible oil-in-water emulsions, and even high-viscosity crude oil-in-water emulsions. Inspired by the self-cleaning property of sea urchin thorns, a bioinspired anti-oil-fouling hierarchically structured membranes decorated with urchin-like α-FeOOH particles was successfully prepared via the layer-by-layer (LBL) self-assembly method, maintaining numerous effective micro-nanopores. The hierarchical structured membrane exhibited superior superhydrophilicity/underwater superoleophobicity, high water-retention ability, and preferable anti-oil-fouling properties. Furthermore, the biomimetic membrane with controllable pore sizes could not only separate common layered oil/water mixtures but also effectively separate immiscible surfactant-stabilized oil-in-water emulsions of both low-viscosity crude oil and high-viscosity crude oil with an ultrahigh water flux up to 2598.4 L m^-2 h^-1 and an outstanding separation efficiency of 98.5%, revealing its promising prospect in oily wastewater treatment.

Ultrafast separation of oil/water mixtures with layered double hydroxide coated stainless steel meshes (LDH-SSMs)

With the frequent discharge of wastewater and leakage of oil accidents, it has gained much attention to treat oil and organic pollutants from water. Herein, a facile and environmentally friendly approach is presented to fabricate MgAlZn layered double hydroxide-coated stainless steel mesh (LDH-SSM) via hydrothermal method, which could be used to separate various oil/water mixtures due to its superhydrophilic and underwater superoleophobic property. The as-prepared mesh possesses selective separation performance for oil/water mixtures with separation efficiency higher than 99.2% and high water flux of ∼ 44.5 L m^-2 s^-1 under gravity-driven force. Such membrane shows an effective separation for oil/water mixtures and recyclability, as well as exhibit excellent superhydrophilicity, making it a prominent candidate for oily water remediation.

One-step synthesis of functional metal organic framework composite for the highly efficient adsorption of tylosin from water

Functional metal organic framework composite can effectively remove antibiotics from environmental water samples. However, designing excellent adsorbents with multiple active sites via a rapid one-step method is still a challenging problem. A novel metal organic framework composite (UiO-66-NH₂-AMPS) was synthesized through one-step polymerization by adding functional monomer 2-acrylamide-2-methylpropanesulfonic acid (AMPS) during the preparation of UiO-66-NH₂. The microstructure and morphology of the UiO-66-NH₂-AMPS composite were characterized, and the adsorption performance towards tylosin (TYL) in water was explored by equilibrium adsorption experiment. The results illustrated that the adsorption equilibrium can be reached within 1 h, and the maximum binding amount of UiO-66-NH₂-AMPS for TYL was 161.60 mg g^-1, which was approximately 2.1-329 times of that of the other adsorbents. The pseudo second-order kinetic and Liu isotherm model were suitable for the adsorption process, and thermodynamic study displayed that the adsorption of UiO-66-NH₂-AMPS composite for TYL is spontaneous and endothermal. The infrared and X-ray photoelectron spectra exhibited that hydrogen bond and electrostatic interaction were the primary recognition force for TYL. The UiO-66-NH₂-AMPS composite have been successfully applied to remove TYL from environmental water. After 5 cycles, the removal efficiency of UiO-66-NH₂-AMPS was still above 91.30%.

A self-cleaning zwitterionic nanofibrous membrane for highly efficient oil-in-water separation

The oil and bacteria adhesion during membrane separation process brings great challenges to the operation costs and membrane service life. Meantime, the strong chemical corrosion in sewage seriously limits the durability of membrane as well. Herein, a facile strategy is developed for fabricating highly stable and efficient zwitterionic nanofibrous membrane (NFM) with self-cleaning feature via the combination of in-situ cross-linking of poly (sulfobetaine methacrylate) (PSBMA) and electrospun poly (ether sulfone) (PES) nanofibers. Owing to the introduction of zwitterionic functional groups, the PSBMA/PES NFM exhibits superior antifouling ability (over 3 cycles of crude oil fouling/self-cleaning and up to 7 days of bacteria adhesion/repelling tests). Moreover, the membrane also presents remarkable chemical stability in acidic, alkaline and salty environments; and exhibits excellent separation performance for both layered oil/water mixture and oil-in-water emulsion as well. Furthermore, the membrane is capable to remove bacteria during the continuous oil/water mixture separation. Overall, the proposed strategy provides a new perspective into developing long-term antifouling membrane materials for complicated oily wastewater remediation in various corrosive environments.