Pyrrolidone-based polymers capable of reversible iodine capture for reuse in antibacterial applications

Tannic acid and carboxymethyl chitosan-based multi-functional double-layered hydrogel with pH-stimulated response behavior for smart real-time infection monitoring and wound treatment

The dramatic increase of drug-resistant pathogenic bacteria has seriously effect on human health, appealing the needs of developing theranostic platforms with stimuli-responsive materials to realize the accurate bacterial diagnostics and therapeutics. Herein, a tannic acid and carboxymethyl chitosan-based multifunctional ZIF-90@i-PPOPs-phenol red double-layered hydrogel with stimuli-responsiveness and antibacterial activity was fabricated. The inner layer hydrogel (ZIF-90@i-PPOPs-based TFC hydrogels) was fabricated based on ZIF-90@i-PPOPs, integrate tannic acid and carboxymethyl chitosan linked by formylphenylboronic acid (FPBA), which exhibited outstanding injectable, biodegradability and antibacterial activity. The outer layer hydrogel (PR@PAM hydrogels) were constructed from polyacrylamide (PAM) and pH indicator phenol red, owning porous structure and excellent tissue adhesion. Due to the weakly acidic microenvironment within wound, the inner-layer hydrogel was stimulus-responsively decomposed, resulting in the accurate delivery of the positively charged ZIF-90@i-PPOPs to the lesion site to capture and kill bacteria by enhanced Zn2+ and ROS release. Meantime, the outer-layer hydrogel could real-timely monitor the pH changes to evaluate the wound recovery status. These double-layered hydrogels possessed precisely pH monitoring capacity, excellent antibacterial ability and negligible side effect to normal tissue in vivo, implying the high potential of the suggested hydrogels as theranostic platform for antibacterial treatment.

Dynamic surface adapts to multiple service stages by orchestrating responsive polymers and functional peptides

Control over the implant surface functions is highly desirable to enhance tissue healing outcomes but has remained unexplored to adapt to the different service stages. In the present study, we develop a smart titanium surface by orchestrating thermoresponsive polymer and antimicrobial peptide to enable dynamic adaptation to the implantation stage, normal physiological stage and bacterial infection stage. The optimized surface inhibited bacterial adhesion and biofilm formation during surgical implantation, while promoted osteogenesis in the physiological stage. The further temperature increase driven by bacterial infection induced polymer chain collapse to expose antimicrobial peptides by rupturing bacterial membranes, as well as protect the adhered cells from the hostile environment of infection and abnormal temperature. The engineered surface could inhibit infection and promote tissue healing in rabbit subcutaneous and bone defect infection models. This strategy enables the possibility to create a versatile surface platform to balance bacteria/cell-biomaterial interactions at different service stages of implants that has not been achieved before.

Facile fabrication of two-dimensional iodine nanosheets for antibacterial therapy

Herein, we report a facile approach for the preparation of two-dimensional iodine nanosheets (2D iodine NSs) with good stability and high biocompatibility via an aqueous solvent-assisted ultrasonic route. Due to the large specific surface area of the 2D morphology, iodine NSs effectively interact with bacterial membranes and destroy bacterial integrity, as well as further damaging intracellular DNA, showing prominent antibacterial activity against S. aureus in vitro and in vivo.

A Highly Efficient Polystyrene-Based Cationic Resin to Reduce Bacterial Contaminations in Water

Nowadays, new water disinfection materials attract a lot of attention for their cost-saving and ease of application. Nevertheless, the poor durability of the matrices and the loss of physically incorporated or chemically attached antibacterial agents that can occur during water purification processes considerably limit their prolonged use. In this study, a polystyrene-based cationic resin (R4) with intrinsic broad-spectrum antibacterial effects was produced without needing to be enriched with additional antibacterial agents that could detach during use. Particularly, R4 was achieved by copolymerizing 4-ammonium-butyl-styrene (4-ABSTY) with N,N-dimethylacrylamide (DMAA) and using N-(2-acryloylamino-ethyl)-acrylamide (AAEA) as a cross-linker. The R4 obtained showed a spherical morphology, micro-dimensioned particles, high hydrophilicity, high-level porosity, and excellent swelling capabilities. Additionally, the swollen R4 to its maximum swelling capability, when dried with gentle heating for 3 h, released water following the Higuchi’s kinetics, thus returning to the original structure. In time–kill experiments on the clinical isolates of multidrug-resistant (MDR) pathogens of fecal origin, such as enterococci, Group B Salmonella species, and Escherichia coli, R4 showed rapid bactericidal effects on enterococci and Salmonella, and reduced E. coli viable cells by 99.8% after 4 h. When aqueous samples artificially infected by a mixture of the same bacteria of fecal origin were exposed for different times to R4 in a column, simulating a water purification system, 4 h of contact was sufficient for R4 to show the best bacterial killing efficiency of 99%. Overall, thanks to its physicochemical properties, killing efficiency, low costs of production, and scalability, R4 could become a cost-effective material for building systems to effectively reduce bacterial, even polymicrobial, water contamination.

Tavaborole-Induced Inhibition of the Aminoacyl-tRNA Biosynthesis Pathway against Botrytis cinerea Contributes to Disease Control and Fruit Quality Preservation

The inhibitory effect of tavaborole on the invasion of Botrytis cinerea in grapes and tomatoes, as well as the potential mechanism involved, was discovered in this study. Our findings showed that tavaborole inhibited Botrytis cinerea spore germination and mycelial expansion in vitro and that the control efficiency in vivo on fruit decay was dose-dependent, which was effective in reducing disease severity and maintaining the organoleptic quality of the fruit, such as reducing weight loss and retaining fruit hardness and titratable acid contents during storage. Furthermore, the precise mechanism of action was investigated further. Propidium iodide staining revealed that Botrytis cinerea treated with tavaborole lost membrane integrity. For further validation, cytoplasmic malondialdehyde accumulation and leakage of cytoplasmic constituents were determined. Notably, the inhibitory effect was also dependent on inhibiting the activities of aminoacyl-tRNA synthetases involved in the aminoacyl-tRNA biosynthesis pathway in Botrytis cinerea. The above findings concluded that tavaborole was effective against Botrytis cinerea infection in postharvest fruit, and a related mechanism was also discussed, which may provide references for the drug repurposing of tavaborole as a postharvest fungicide.

Triazine-based porous organic polymers for reversible capture of iodine and utilization in antibacterial application

The capture and safe storage of radioactive iodine (¹²⁹I or ¹³¹I) are of a compelling significance in the generation of nuclear energy and waste storage. Because of their physiochemical properties, Porous Organic Polymers (POPs) are considered to be one of the most sought classes of materials for iodine capture and storage. Herein, we report on the preparation and characterization of two triazine-based, nitrogen-rich, porous organic polymers, NRPOP-1 (SA_BET = 519 m² g⁻¹) and NRPOP-2 (SA_BET = 456 m² g⁻¹), by reacting 1,3,5-triazine-2,4,6-triamine or 1,4-bis-(2,4-diamino-1,3,5-triazine)-benzene with thieno[2,3-b]thiophene-2,5-dicarboxaldehyde, respectively, and their use in the capture of volatile iodine. NRPOP-1 and NRPOP-2 showed a high adsorption capacity of iodine vapor with an uptake of up to 317 wt % at 80 °C and 1 bar and adequate recyclability. The NRPOPs were also capable of removing up to 87% of iodine from 300 mg L⁻¹ iodine-cyclohexane solution. Furthermore, the iodine-loaded polymers, I₂@NRPOP-1 and I₂@NRPOP-2, displayed good antibacterial activity against Micrococcus luteus (ML), Escherichia coli (EC), and Pseudomonas aeruginosa (PSA). The synergic functionality of these novel polymers makes them promising materials to the environment and public health.

Synthesis of polyacrylonitrile/polytetrahydropyrimidine (PAN/PTHP) nanofibers with enhanced antibacterial and anti-viral activities for personal protective equipment

Emerging infectious diseases caused by the spread of bacteria and viruses are a major burden on global economic development and public health. At present, most personal protective equipment has weak antibacterial and anti-viral properties. The PAN/PTHP nanofibers reported in this article provide a new method for the development of personal protective equipment. In this study, a mixture of PTHP and PAN was prepared into PAN/PTHP nanofibers with high-efficiency and long-lasting antibacterial effects (>99.999%) through the electrospinning process. Live/dead staining and cell proliferation experiments showed that the preparation of PAN/PTHP nanofibers has good cell compatibility. In addition, PAN/PTHP nanofibers show obvious destructive effects on lentiviruses. Based on these characteristics, PAN/PTHP nanofibers were applied to facial masks, which can be used as the inflatable biocidal layer of facial masks and have an excellent interception effect on particles in the air. The successful synthesis of these fascinating materials may provide new insights for the development of new protective materials.

An N-Halamine/Graphene Oxide-Functionalized Electrospun Polymer Membrane That Inactivates Bacteria on Contact and by Releasing Active Chlorine

The emergence of antibiotic-resistant "superbugs" in recent decades has led to widespread illness and death and is a major ongoing public health issue. Since traditional antimicrobials and antibiotics are in many cases showing limited or no effectiveness in fighting some emerging pathogens, there is an urgent need to develop and explore novel antibacterial agents that are both powerful and reliable. Combining two or more antibiotics or antimicrobials has become a hot topic in antibacterial research. In this contribution, we report on using a simple electrospinning technique to create an N-halamine/graphene oxide-modified polymer membrane with excellent antibacterial activity. With the assistance of advanced techniques, the as-obtained membrane was characterized in terms of its chemical composition, morphology, size, and the presence of active chlorine. Its antibacterial properties were tested with Escherichia coli (E. coli) as the model bacteria, using the colony-counting method. Interestingly, the final N-halamine/graphene oxide-based antibacterial fibrous membrane inactivated E. coli both on contact and by releasing active chlorine. We believe that the synergistic antimicrobial action of our as-fabricated fibrous membrane should have great potential for utilization in water disinfection, air purification, medical and healthcare products, textile products, and other antibacterial-associated fields.

Barbituric and thiobarbituric acid-based UiO-66-NH2 adsorbents for iodine gas capture: Characterization, efficiency and mechanisms

Efficient iodine gas capture is necessitated in many industries like spent nuclear fuel off-gas treatment in view of environmental protection and resource recycling. However, the adsorption efficiency and stability of the current adsorbents are limited. In the present work, efficient and stable barbituric and thiobarbituric acid-based UiO-66-NH₂ adsorbents (i.e., UiO-66-NH-B.D and UiO-66-NH-T.D, respectively) have been synthesized by post-synthetic covalent modification. Characterization approaches, including SEM-EDS, TEM, XRD, FTIR, XPS, ¹H NMR, TGA and BET, are used to obtain information on the properties and adsorption mechanisms of these metal-organic framework (MOF) adsorbents. The kinetics and mechanisms involved are studied in detail. The treatment efficiency and recyclability of the adsorbents are checked and compared with the adsorbents reported in previous works. The results show that the current adsorbents are potentially suitable for efficient iodine gas capture. High maximum iodine adsorption amount by UiO-66-NH-B.D and UiO-66-NH-T.D (1.17 and 1.33 g/g) was achieved under 75 °C. These new adsorbents are thermally stable for iodine adsorption and regenerated and reused with good performance. The adsorption mechanisms were revealed based on experimental results, indicating that iodine is adsorbed by both physisorption and chemisorption.

Cow dung-derived biochars engineered as antibacterial agents for bacterial decontamination

Disposal of the pollutants arising from farming cattle and other livestock threatens the environment and public safety in diverse ways. Herein, we report on the synthesis of engineered biochars using cow dung as raw material, and investigating these biochars as antibacterial agents for water decontamination. By coating the biochars with N-halamine polymer and loading them with active chlorine (i.e., Cl⁺), we were able to regulate them on demand by tuning the polymer coating and bleaching conditions. The obtained N-halamine-modified biochars were found to be extremely potent against Escherichia coli and Staphylococcus aureus. We also investigated the possibility of using these N-halamine-modified biochars for bacterial decontamination in real-world applications. Our findings indicated that a homemade filter column packed with N-halamine-modified biochars removed pathogenic bacteria from mining sewage, dairy sewage, domestic sewage, and artificial seawater. This proposed strategy could indicate a new way for utilizing livestock pollutants to create on-demand decontaminants.

Immobilization of Cu (II) via a graphene oxide-supported strategy for antibacterial reutilization with long-term efficacy

The past several decades have witnessed tremendous research to discover ways for controlling heavy metal pollution, but most of the strategies do not involve reuse of the captured heavy metals. Herein, we propose a graphene oxide -based strategy for the effective removal of Cu²⁺ ions from water, coupled with their reuse as an antibacterial agent. Using GO nanosheets as an adsorbent and nanosupport, the Cu²⁺ ions were effectively extracted from water (>99.9%) and reduced in situ to copper nanoparticles (Cu NPs) containing both crystalline Cu and Cu₂O. The as-captured Cu NPs showed efficient in vitro antibacterial ability against Escherichia coli, reducing the bacteria from 10⁹ to 10¹ CFU mL^-1 by using ¹ mg mL^-1 Cu NPs/GO NSs for 1 h. The minimum inhibitory concentration determined to be only 16 μg mL^-1. For practical applications, Cu recovered from wastewater could reduce bacteria by 8 log CFU in 1 h. The recovered Cu was still able to reduce the bacteria by 7 log CFU after 2 months of storage in an argon atmosphere. This strategy of extracting heavy metals and subsequently reutilizing to kill bacteria will be of great significance for environmental remediation and public healthcare.

Polymeric Iodophors: Preparation, Properties, and Biomedical Applications

The review summarizes the data on the main chemical and physiological properties of iodine and its capability of complexation with natural and synthetic polymers. Iodine is the best known antiseptic used to prevent and treat microbial infections. Its unique capability of complexation with certain polymers opens wide opportunities for targeted and prolonged delivery to target organs. Polymeric complexes with iodine have another color, other morphology, a higher electrical conductivity, and higher biological activity as compared with initial polymers. The formation of and ions is associated with iodine-polymer complexation. Iodine-containing biocompatible adhesive controlled-release formulations are designed as part of research into iodine-polymer complexes. The field is promising in terms of treating certain diseases because tolerance to iodine compounds does not usually develop in microbial cells.

Reusable fibrous adsorbent prepared via Co-radiation induced graft polymerization for iodine adsorption

Volatile iodine released from nuclear power plant reactors is radiological hazard to environment and human's health because of their high fission yield and environmental mobility. The complexity of nuclear waste management motivated the development of solid-phase adsorbents. Herein, co-radiation induced graft polymerization (CRIGP) was employed in the graft polymerization of N-vinyl-2-pyrrolidone (NVP) onto polyethylene-coated polypropylene skin-core (PE/PP) fibers using electron beam (EB) irradiation. This work provides a one-step green synthetic approach to prepare iodine fibrous adsorbents without any chemical initiators or large amount of organic solvent. The original and modified PE/PP fibers were characterized by fourier transform infrared spectrometry (FTIR), X-ray photoelectron spectroscopy (XPS), thermogravimetric (TG) and scanning electron microscopy (SEM) to demonstrate the grafting of NVP onto the PE/PP fibers. The capacity of iodine absorbed by the PE/PP-g-PNVP fibers was 1237.8 mg/g after 180 min. Meanwhile, absorbents can be regenerated efficiently by two different means of ethanol elution and heating at 120 °C, respectively. Within 10 min, 94.17% and 90.12% of the iodine can be released from the PE/PP-g-PNVP fibers with these two methods, respectively. The adsorbent exhibited a long service life of at least ten adsorption-desorption cycles, suggesting that PE/PP-g-PNVP fibers might be a promising adsorbent for volatile iodine adsorption from fission products in nuclear power plant reactors.