Enhanced peroxydisulfate oxidation via Cu(III) species with a Cu-MOF-derived Cu nanoparticle and 3D graphene network

Nitrogen-doped carbon-coated Cu0 activates molecular oxygen for norfloxacin degradation over a wide pH range

The Fenton-like activated molecular oxygen technology demonstrates significant potential in the treatment of refractory organic pollutants in wastewater, offering promising development prospects. We prepared a N-doped C-coated copper-based catalyst Cu0/NC3-600 through the pyrolysis of Mel-modified Cu-based metal-organic framework (MOF). The results indicate that the degradation of 20 mg/L norfloxacin (NOR) was achieved using 1.0 g/L Cu0/NC3-600 across a wide pH range, with a removal rate exceeding 95 % and total organic carbon (TOC) removals approaching 70 % after 60 min at pH 5-11. The nitrogen doping enhances the electronic structure of the carbon material, facilitating the adsorption of molecular oxygen. Additionally, the formed carbon layer effectively prevent copper leaching,contributing to increased stability to a certain extent. Subsequently, we propose the catalytic reaction mechanism for the Cu0/NC/air system. Under acidic conditions, Cu0/NC3-600 activates molecular oxygen to produce the •O2-, which serves as the primary active species for NOR degradation. While in alkaline conditions, the high-valent copper species Cu3+ is generated in conjunction with •O2-, both working simultaneously for NOR degradation. Furthermore, based on the LC-MS results, we deduced four possible degradation pathways. This work offers a novel perspective on expanding the pH range of copper-based catalysts with excellent ability to activate molecular oxygen for environmental water treatment.

The Application of Metal-Organic Frameworks in Water Treatment and Their Large-Scale Preparation: A Review

Over the last few decades, there has been a growing discourse surrounding environmental and health issues stemming from drinking water and the discharge of effluents into the environment. The rapid advancement of various sewage treatment methodologies has prompted a thorough exploration of promising materials to capitalize on their benefits. Metal-organic frameworks (MOFs), as porous materials, have garnered considerable attention from researchers in recent years. These materials boast exceptional properties: unparalleled porosity, expansive specific surface areas, unique electronic characteristics including semi-conductivity, and a versatile affinity for organic molecules. These attributes have fueled a spike in research activity. This paper reviews the current MOF-based wastewater removal technologies, including separation, catalysis, and related pollutant monitoring methods, and briefly introduces the basic mechanism of some methods. The scale production problems faced by MOF in water treatment applications are evaluated, and two pioneering methods for MOF mass production are highlighted. In closing, we propose targeted recommendations and future perspectives to navigate the challenges of MOF implementation in water purification, enhancing the efficiency of material synthesis for environmental stewardship.

Graphene shell-encapsulated copper-based nanoparticles (G@Cu-NPs) effectively activate peracetic acid for elimination of sulfamethazine in water under neutral condition

In this study, a graphene shell-encapsulated copper-based nanoparticles (G@Cu-NPs) was prepared and employed for peracetic acid (PAA) activation. The characterization of G@Cu-NPs confirmed that the as-prepared material was composed of Cu⁰ and Cu₂O inside and encapsulated by a graphene shell. Experimental results suggested that the synthesized G@Cu-NPs could activate PAA to generate free radicals for efficiently removing sulfamethazine (SMT) under neutral condition. The formation of graphene shells could strongly facilitated electron transfer from the core to the surface. Radical quenching experiments and electron spin resonance (ESR) analysis confirmed that organic radicals (R-O•) and hydroxyl radicals (•OH) were generated in the G@Cu-NPs/PAA system, and R-O• (including CH₃CO₃• and CH₃CO₂•) was the main contributor to the elimination of SMT. The possible SMT degradation pathways and mechanisms were proposed, and the toxicity of SMT and its intermediates was predicted with the quantitative structure-activity relationship (QSAR) analysis. Besides, the effects of some key parameters, common anions, and humic acid (HA) on the removal of SMT in the G@Cu-NPs/PAA system were also investigated. Finally, the applicability of G@Cu-NPs/PAA system was explored, showing that the G@Cu-NPs/PAA system possessed satisfactory adaptability to treat different water bodies with admirable reusability and stability.

Bicarbonate enhanced heterogeneous activation of peroxymonosulfate by copper ferrite nanoparticles for the efficient degradation of refractory organic contaminants in water

Nowadays, the treatment of residual refractory organic contaminants (ROCs) is a huge challenge for environmental remediation. In this study, a potential process is provided by copper ferrite catalyst (CuFe₂O₄) activated peroxymonosulfate (PMS, HSO₅^-) in the bicarbonate (HCO₃^-) enhanced system for efficient removal of Acid Orange 7 (AO7), 2,4-dichlorophenol, phenol and methyl orange (MO) in water. The impact of key reaction parameters, water quality components, main reactive oxygen species (ROS), probable degradation mechanism, rational degradation pathways and catalyst stability were systematically investigated. A 95.0% AO7 (C₀ = 100 mg L^-1) removal was achieved at initial pH (pH₀) of 5.9 ± 0.1 (natural pH), CuFe₂O₄ dosage of 0.15 g L^-1, PMS concentration of 0.98 mM, HCO₃^- concentration of 2 mM, and reaction time of 30 min. Both sulfate radical (SO₄^-•) and hydroxyl radical (^•OH) on the surface of catalyst were proved as the predominant radical species through radical quenching experiments and electron paramagnetic resonance (EPR) analysis. The buffer nature of HCO₃^- was partially contributed for the enhanced degradation of AO7 under CuFe₂O₄/PMS/HCO₃^- system. Importantly, according to ¹³C nuclear magnetic resonance (NMR) and EPR analysis, the positive effect of bicarbonate may be mainly attributed to the formation of peroxymonocarbonate (HCO₄^-), which may enhance the generation of ^•OH. The magnetic CuFe₂O₄ particles can be well recycled and the leaching concentration of Cu was acceptable (<1 mg L^-1). Considering the widespread presence of bicarbonate in water environment, this work may provide a safe, efficient, and sustainable technique for the elimination of ROCs from practical complex wastewater.

Copper oxides activate peroxymonosulfate for degradation of methylene blue via radical and nonradical pathways: surface structure and mechanism

A one-step hydrothermal method for preparation of copper oxides with different valences using ascorbic acid as a reducing reagent was developed for environmental remediation. The results suggested that the notable degradation performance of CuO₀ may be attributable to the abundant active sites, such as Cu or Cu-O, and was not significantly related to the Cu valence state. In contrast to direct degradation of pollutants by traditional superoxide radicals (O₂^•-), O₂^•- played an important role in the reduction of high-valence Cu ions (Cu(III)). In addition, a series of radical quenching, electron paramagnetic resonance (EPR), and electrochemical experiments validated the existence of direct electron transfer between methylene blue (MB) and PMS mediated by CuO₀ and surface-bound radicals. The results suggested that the CuO₀/PMS system may be less susceptible to diverse ions and natural organic matter other than dihydrogen phosphate anions. The mechanism of MB degradation under alkaline conditions was different from that under acidic conditions in that it was not reliant on radicals or charge transfer but direct oxidation by PMS. This study provides new insights into the heterogeneous processes involved in PMS activation by the copper oxides. Furthermore, this paper devotes to providing theoretical basis on pollutant removal via PMS activated by copper oxides and developing low-cost and high-efficiency catalysts.

Graphene-Based Metal-Organic Framework Hybrids for Applications in Catalysis, Environmental, and Energy Technologies

Current energy and environmental challenges demand the development and design of multifunctional porous materials with tunable properties for catalysis, water purification, and energy conversion and storage. Because of their amenability to de novo reticular chemistry, metal-organic frameworks (MOFs) have become key materials in this area. However, their usefulness is often limited by low chemical stability, conductivity and inappropriate pore sizes. Conductive two-dimensional (2D) materials with robust structural skeletons and/or functionalized surfaces can form stabilizing interactions with MOF components, enabling the fabrication of MOF nanocomposites with tunable pore characteristics. Graphene and its functional derivatives are the largest class of 2D materials and possess remarkable compositional versatility, structural diversity, and controllable surface chemistry. Here, we critically review current knowledge concerning the growth, structure, and properties of graphene derivatives, MOFs, and their graphene@MOF composites as well as the associated structure-property-performance relationships. Synthetic strategies for preparing graphene@MOF composites and tuning their properties are also comprehensively reviewed together with their applications in gas storage/separation, water purification, catalysis (organo-, electro-, and photocatalysis), and electrochemical energy storage and conversion. Current challenges in the development of graphene@MOF hybrids and their practical applications are addressed, revealing areas for future investigation. We hope that this review will inspire further exploration of new graphene@MOF hybrids for energy, electronic, biomedical, and photocatalysis applications as well as studies on previously unreported properties of known hybrids to reveal potential "diamonds in the rough".

Mechanistic insights into carbo-catalyzed persulfate treatment for simultaneous degradation of cationic and anionic dye in multicomponent mixture using plastic waste-derived carbon

Upcycling waste into value-added products for utilization in wastewater abatements has been explored in a number of treatment technologies. One such waste, single-use plastic, which poses significant adverse environmental and economic impact, has been chosen and converted into graphitic carbon to reduce the waste burden sustainably and economically. The sorptive and catalytic performance of synthesized plastic waste-derived carbon (PWC) was evaluated using brilliant green (BG) and eosin yellow (EY) as target pollutants. The adsorption capacity of PWC was very low for BG (7.41 mg/g) and EY (4.93 mg/g). The coupling of PWC with peroxymonosulfate (PMS) promoted dye degradation. Complete degradation of the dye, with ~61% reduction in TOC and ~95% reduction in toxicity, was achieved by oxidative treatment (initial concentration: 10 mg/L). The functionalities of PWC facilitated better electron transfer to PMS for its effective activation, which led to the production of SO₄^•- and OH^•. The quenching study confirmed that the degradation of dyes was primarily due to SO₄^•-. Additionally, the pathways of dye degradation were proposed based on the intermediates identified. Thus, this study established the high potential of PWC as a metal-free catalyst in PMS activation for the abatement of organic pollutants.

The synergistic effect of calcite and Cu2+ on the degradation of sulfadiazine via PDS activation: A role of Cu(Ⅲ)

A system of Cu²⁺/calcite/PDS was constructed to degrade sulfadiazine (SDZ). Different from the traditional Cu-mediated activation, a low concentration of Cu²⁺ that met drinking water standards (≤ 1 mg/L) transformed into Cu(Ⅱ) solid in the presence of calcite, and then enhanced the degradation of SDZ via PDS activation over a pH range from 3 to 9. According to scavenger and chemical probe experiments, Cu(Ⅲ), rather than radicals (hydroxyl radicals and sulfate radicals) and singlet oxygen, was the predominant reactive species, which was responsible for the degradation of SDZ. Based on the results of XRD, ATR-FTIR, and CV curves et al., CuCO₃ was the main complex with high reactivity for PDS activation to form Cu(Ⅲ). Moreover, detailed degradation pathways of sulfadiazine were proposed according to the UPLC-ESI-MS/MS and their toxicity was predicted by ECOSAR. Besides, the real water matrix would not seriously affect the degradation of SDZ in the Cu²⁺/calcite/PDS system. In summary, this study reveals a new insight into the synergistic effect of Cu²⁺ and calcite on the SDZ degradation, and promotes an understanding of the environmental benefits of natural calcite.

Origin of the Excellent Activity and Selectivity of a Single-Atom Copper Catalyst with Unsaturated Cu-N2 Sites via Peroxydisulfate Activation: Cu(III) as a Dominant Oxidizing Species

As an efficient active oxidant for the selective degradation of pollutants in wastewater, the high-valent copper species Cu(III) with persulfate activation has attracted substantial attention in some Cu-based catalysts. However, the systematic study of a catalyst structure and mechanism about Cu(III) with peroxydisulfate (PDS) activation is challenging owing to the coexistence of multiple Cu species and the structural symmetry of PDS. Herein, we anchored a Cu atom with two pyridinic N atoms to synthesize a single-atom Cu catalyst (Cu_SA-NC). Experimental characterizations and theoretical calculations complemented each other well because of the uniform atomic active sites. The single-atom Cu was identified as the active site, and the unsaturated Cu-N₂ configuration was more conductive to PDS activation than the saturated Cu-N₄ configuration. Benefiting from the generation of Cu(III), Cu_SA-NC exhibited an obvious selective and anti-interference performance for pollutant degradation in a complex matrix. The superior catalytic activity of Cu_SA-NC compared with that of other reported Cu-based catalysts and good durability in a continuous-flow experiment further revealed the potential of Cu_SA-NC for practical applications. This work strongly deepens the understanding of the generation of Cu(III) in a single-atom Cu catalyst with unsaturated Cu-N₂ sites under PDS activation and develops an efficient approach for actual water purification.

Monodispersed CuO nanoparticles supported on mineral substrates for groundwater remediation via a nonradical pathway

Nonradical oxidation based on singlet oxygen (¹O₂) has attracted great interest in groundwater remediation due to the selective oxidation property and good resistance to background constituents. Herein, recoverable CuO nanoparticles (NPs) supported on mineral substrates (SiO₂) were prepared by calcination of surface-coated metal-plant phenolic networks and explored for peroxymonosulfate (PMS) activation to generate ¹O₂ for degrading organic pollutants in groundwater. CuO NPs with a close particle size (40 nm) were spatially monodispersed on SiO₂ substrates, allowing highly exposure of active sites and consequently leading to outstanding catalytic performance. Efficient removal of various organic pollutants was obtained by the supported CuO NPs/PMS system under wide operation conditions, e.g., working pH, background anions and natural organic matters. Chemical scavenging experiments, electron paramagnetic resonance tests, furfuryl alcohol decay and solvent dependency experiments confirmed the formation of ¹O₂ and its dominant role in pollutants removal. In situ characterization with ATR-FTIR and Raman spectroscopy and computational calculation revealed that a redox cycle of surface Cu(II)-Cu(III)-Cu(II) was responsible for the generation of ¹O₂. The feasibility of the supported CuO NPs/PMS for actual groundwater remediation was evaluated via a flow-through test in a fixed-bed column, which manifested long-term durability, high mineralization ratio and low metal ion leaching.

Hollow porous cobalt oxide nanobox as an enhanced for activating monopersulfate to degrade 2-hydroxybenzoic acid in water

As 2-hydroxybenzoic acid (HBA) represents a typical pharmaceutical and personal care product (PPCP), constant releasing of HBA into the environment poses threats to the ecology, and thus it is critical to develop effective techniques to remove HBA from water. Recently, sulfate radical (SO₄^‒)-based advanced oxidation processes involved with monopersulfate (MPS) activation are proven as effective approaches for eliminating PPCPs from water, and Co₃O₄ is recognized as a capable catalyst for activating MPS. Therefore, great interests have arisen to develop Co₃O₄-based catalysts with advantageous morphologies and characteristics for enhancing catalytic activities. Therefore, a special Co₃O₄-based material is proposed in this work. Through a surfactant-assisted strategy, a cubic Co-MOF is prepared and used as a precursor, which is etched to afford hollow structure, and then transformed into hollow porous Co₃O₄ nanobox (PCNB). PCNB can exhibit distinct reactive surface with abundant surface oxygen vacancy as well as physical properties in comparison to the commercial Co₃O₄ NPs (com-Co₃O₄ NP), thereby leading to the outstanding catalytic activity of PCNB for activating MPS to degrade HBA. The activation energy (E_a) of 46.2 kJ/mol is also calculated using PCNB + MPS system, which is much lower than most of recent reported studies for activating MPS. PCNB could be also reusable over 5 consecutive HBA degradation cycles. The activation mechanism of MPS by PCNB and HBA degradation pathway are also comprehensively elucidated via experimental evidences and the theoretical calculation to offer insightful information of development of Co₃O₄ for HBA degradation.

Activation of persulfate by mesoporous silica spheres-doping CuO for bisphenol A removal

In the present work, mesoporous silica spheres-doping CuO (CuO/MSS) was prepared via a facile hydrothermal method. It acted as a peroxydisulfate (PDS) activator for the removal of bisphenol A (BPA). X-Ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), and energy dispersive X-ray spectroscopy (EDS) showed that CuO was successfully synthesized and silica spheres were doped in CuO. Nitrogen sorption isotherm showed that CuO/MSS, which had a high specific surface area and a narrow pore size distribution, exhibited a mesoporous structure. The effect of initial pH, PDS dosage, catalyst amount, and activation temperature was assessed. A removal efficiency of over 80% was observed after five consecutive cycles, suggesting the superior stability of the catalyst. X-ray photoelectron spectroscopy (XPS), radical quenching experiments, and electrochemical evaluation showed that BPA removal was dominated by the electron transfer among PDS, BPA, and the surface of CuO/MSS (non-radical pathway), while SO₄^·- and OH· radicals had a minor contribution (radical pathway). In addition, the degradation pathways of BPA were proposed according to the intermediates. Overall, this study indicates that CuO/MSS is a promising effective PDS activator to address the drawbacks of the classical Fenton process.

Copper Nanocomposites In Situ Formed from Metallic Glasses for an Efficient Catalytic Performance

Metallic glasses (MGs) with the unique long-range disordered and short-range ordered atomic structure have attracted extensive attention in the field of environmental catalysis due to their advanced catalytic capability. Herein, CuZr-based MGs are first proven to exhibit superior catalytic performance toward the degradation of organic pollutants compared to the annealed ribbons with different crystal structures; many Cu nanocomposites are gradually in situ precipitated on the surface of the ribbons. The enhanced catalytic behavior is mainly attributed to the random atomic packing structure accelerating electron transport and providing sufficient active sites. On the other hand, the active species, for example, ·OH, ·O₂^-, and Cu(III), are generated through an activation reaction between Cu/Cu₂O nanocomposites and H₂O₂ molecules for the catalytic degradation process. Additionally, further investigation indicated that CuZr-based MGs also present superior stability and durability along with an approximate 96% degradation efficiency within 10 min at the 10th run. This research can successfully explain why MGs have a little higher catalytic reactivity than their crystalline counterparts, and more importantly, it will provide a new strategy for the preparation of catalytic materials for wastewater treatment.

Selective Removal of Phenolic Compounds by Peroxydisulfate Activation: Inherent Role of Hydrophobicity and Interface ROS

Selective removal of organic pollutants by advanced oxidation methods has been receiving increasing attention for environmental remediation. In this study, a novel catalyst, which can selectively oxidize phenolic compounds (PCs) based on their hydrophobicity, composed of metal-organic-framework-derived Fe/Fe₃O₄ and three-dimensional reduced graphene oxide (rGOF) is designed for peroxydisulfate (PDS) activation. This heterogeneous PDS activation system can completely degrade hydrophobic PCs within 30 min. By investigating the hydrophobic properties of eight representative PCs, a positive correlation between the hydrophobicity of PC and the reaction kinetics is reported for the first time. The selective removal stems from the strong interaction between highly hydrophobic PCs and the catalyst. Moreover, the mechanism investigation shows that the degradation reaction is triggered by interface reactive oxygen species (ROS). Our study reveals that the selective degradation of organic pollutants by PDS activation depends on the hydrophilic and hydrophobic properties of the pollutant and catalyst. The reported results provide new insights into a highly selective and efficient PDS activation system for organic pollutant removal.

Copper–cobalt coordination polymers and catalytic applications on borrowing hydrogen reactions

A porous copper–cobalt polymer was synthesized and achieved applications for the N-alkylation of sulfonamides with alcohols, and carboxamides with alcohols.

Activation of peroxymonosulfate by molybdenum disulfide-mediated traces of Fe(III) for sulfadiazine degradation

The activation of persulfate by ferrous iron (Fe(II)) is of great interest to the environmental remediation community, but the reduction of ferric iron (Fe(III)) to Fe(II) is slow and the accumulation of iron sludge resulted from the precipitation of Fe(III) is a great concern. Here, molybdenum disulfide (MoS₂) was studied as a co-catalyst to improve the activation of peroxymonosulfate (PMS) by Fe(III) for sulfadiazine (SDZ) degradation and different characterization technologies were used to reveal the reactive species. The results showed that a strong synergy existed between MoS₂ and Fe(III); approximately 94.3% of the SDZ was removed by MoS₂-Fe(III)-PMS after reaction for 30 min, while only 8.5% and 56.4% of the SDZ was removed by Fe(III)-PMS and MoS₂-PMS, respectively. Both hydroxyl radicals and sulfate radicals were generated and the latter was the primary species. In addition to the radicals, singlet oxygen was found to be generated and contributed to the degradation of SDZ. The chemical probe reaction with methyl phenyl sulfoxide showed that the generation of high-valent iron-oxo species was not obvious by MoS₂-Fe(III)-PMS under both acidic and neutral conditions. MoS₂ had good stability. No noticeable deactivation was observed during the 1st to 5th run and no obvious oxidation of surface Mo(IV) occurred. Based on the characterization of catalyst and oxidizing species, a mechanism for the activation of PMS by MoS₂-Fe(III) was proposed. The results from this study are expected to clarify the reactive species and deepen the understanding of MoS₂-promoted persulfate activation by Fe(II)/Fe(III).

Rational assembly of GO-based heterocyclic sulfur- and nitrogen-containing aerogels and their adsorption properties toward rare earth elementals

An aromatic heterocyclic compound, 2-aminobenzothiazole (ABT), was used to decorate graphene oxide (GO) by a facile hydrothermal self-assembly procedure. The developed three-dimensional (3D) GO-ABT composite aerogels could be utilized as high-powered and sustainable adsorbents for the enrichment and recovery of low concentration rare earth elements (REEs) from aqueous solutions. The composition and microstructure of GO-ABT composites were explored various characterization methods. The enrichment properties of GO-ABT composites for REEs were investigated in detail, revealing the existence of S-, N- and -NH₂ in ABT, as well as the carboxyl and hydroxyl groups of GO which might act as the major REE binding sites. The adsorption of GO-ABT composites for low concentration REEs could reach equilibrium in 30 min. Our investigations confirmed that the optimal pH value of GO-ABT composites for REEs was pH 4.0-5.0. For the adsorbent regeneration study, 50.0 mg of GO-ABT_{15:1/120 °C/6 h} composite was used toward 20.0 mL of Er³⁺ solutions. After ten regeneration cycles, the adsorption rates of GO-ABT composites for Er³⁺ remained around 100%, and the desorption rates maintained over 90%. The long-term storage of the adsorbent did not affect its adsorption ability, while desorption rates increased, indicating it possessed relatively higher stability.