Collection and decomposition of oil mist via corona discharge and surface dielectric barrier discharge

Upcycle hazard against other hazard: Toxic fluorides from plasma fluoropolymer etching turn novel microbial disinfectants

The release of toxic fluoride byproducts is a seemingly unavoidable artifact of surface engineering, causing severe environmental and human health problems. Here we propose and implement a new "upcycle hazard against other hazard" concept in the case study of cold atmospheric plasma surface modification of fluoropolymers such as polytetrafluorethylene (PTFE). Capitalizing on the excellent controllability, precision and energy efficiency of the plasma surface processing, complemented with the recently discovered ability of plasmas to activate water to produce a potent electrochemical disinfectant, referred to as the plasma-activated water (PAW), we demonstrate a radically new solution to capture the hazardous gaseous fluorides into the PAW and use the as-fluorinated PAW (F-PAW) as a very effective antimicrobial disinfectant. A customized surface discharge reactor is developed to evaluate the effects of fluorides released from the plasma etching of PTFE on the chemistries in gas-phase plasmas and F-PAW, as well as the antibacterial effect of F-PAW. The results show that gaseous fluorides, including COF₂, CF₃COF, and SiF₄ are produced in gas-phase plasmas, and the dissolution of thus-generated fluorides into PAW has a strong effect on inactivating catalase and destroying the oxidation resistance of bacterial cells. As a result, the antibacterial effect of PAW-fluorides against the methicillin-resistant Staphylococcus aureus (MRSA) is enhanced by > 5 log reductions, suggesting that otherwise hazardous fluorides from the plasma processing of PTFE can be used to enhance the microbial disinfection efficiency of PAW. The demonstrated approach opens new avenues for sustainable hazard valorization exemplified by converting toxic fluoride-etching products into potent antimicrobial and potentially anti-viral disinfectants.

Experimental Study on Microwave-Assisted Ignition and Combustion Characteristics of ADN-Based Liquid Propellant

Microwave-assisted ignition is a new ignition method, which has the advantages of reliable ignition and high ignition energy and requires no preheating. In this study, experimental methods were used to study the microwave-assisted ignition and combustion characteristics of ADN-based liquid propellant, and the effects of microwave power and propellant flow rate on combustion flame structure, spectral emission characteristics, and flame temperature were investigated. In the experiment, a microwave-assisted ignition experimental device was established first. The ADN-based liquid propellant was injected into the microwave high-energy region from the bottom of the resonator through a hollow straight tube with an inner diameter of 1 mm, and the gas was introduced in a coaxial manner. The research results demonstrated that when the microwave power increased from 1000 to 2000 W, the flame height increased from 11.12 to 17.32 mm; the free radical intensity of C₂*, NH₂, and HNO* increased significantly; the flame temperature increased by about 28.9%. The increase in microwave power is helpful to the generation of intermediate products and the combustion performance of propellant is better. When the propellant flow rate was increased from 25 to 45 mL/min, it was found that the spray combustion effect was the best when the propellant flow rate was 30 mL/min, the flame height increased by 25.2%, and the flame temperature increased by about 11.3%.