Covalent organic frameworks functionalized electrodes for simultaneous removal of UO22+ and ReO4- with fast kinetics and high capacities by electro-adsorption

Alkyl modified cationic COFs for preferential trapping of charge dispersed perrhenate: Synergistic hydrophobicity and anion-recognition effects

Charge dispersed oxoanionic pollutants (such as TcO4- and ReO4-) with low hydrophilicity are typically difficult to be preferentially extracted. Recently, cationic covalent organic frameworks (COFs) have received considerable attention for anions trapping. Two cationic COFs, denoted as Tp-S and Tp-D, were synthesized by incorporating ethyl and cyclic alkylated diquats into 2,2'-bipyridine-based COF. A synergistic effect of hydrophobic channel and anion-recognition sites were achieved by branched chains, which effectively surmounted the Hofmeister bias. Both Tp-S and Tp-D exhibited raising removal performance for surrogate ReO4- at high acidity with adsorption capacities of 435.6 and 291.4 mg g-1, respectively. Obvious variations caused by side chains were displayed in microstructures and adsorption performance. Specially, compared with Tp-D, Tp-S demonstrated desirable priority in uptake capacity and selectivity. In a real-scenario experiment, Tp-S could remove 72.8 % of ReO4- in a simulated Hanford LAW stream, which was attributed to the spatial effects and charge distribution arising from the open and flexible side chains of Tp-S. Otherwise, the rigid cyclic chains endowed pyridine-base Tp-D material an unprecedented alkaline stability. Spectra and theoretical calculations revealed a mechanism of preferential capture based on electrostatic interaction and hydrogen bonding between charge dispersed ReO4-/TcO4- and Tp-S/Tp-D. This work provides an innovative perspective to tailored materials for the treatment of oxoanionic contaminants.

Ultrafast and selective capture of 99TcO4-/ReO4- from wastewater by hyper-branched quaternary ammonium group-functionalized resin

99Tc primarily exists high mobility in the natural aqueous environment due to its extremely high solubility and non-complexing features, which can easily cause radioactive pollution. We herein report a general strategy for constructing a novel resin (SiPAN-PEI) with multiple positive charges nitrogen, exhibiting ultrafast adsorption kinetics (< 3 min), superior adsorption capacities (463.96 mg g-1), and excellent selectivity in the presence of excess competitive anions, which exceed those of most commercial resins. Moreover, based on impressive structure stability in extreme conditions, SiPAN-PEI can still maintain superior adsorption abilities after suffering irradiation, calcination, and immersion in strong acid. In addition, the separation performance kept excellently after five loading-washing-eluting cycles and the total adsorption ratio can still reach 97 %. Outstandingly, SiPAN-PEI can remove most of ReO4- from simulated nuclear wastewater through a sequential injection automatic separation system and can reduce the concentration of ReO4- to the maximum concentration standard set by the World Health Organization (WHO) in a short time. Leveraging density functional theory calculations and other characteristics clearly elucidated adsorption mechanism of anion-exchange between Cl- and TcO4-/ReO4-. In terms of superior adsorption property, SiPAN-PEI is demonstrated to be a pretty candidate for 99Tc elimination from wastewater.

Synthesis and performance of guanidinium-based cationic organic polymer for the efficient removal of TcO4-/ReO4. JOURNAL OF HAZARDOUS MATERIALS 2024;466:133602. [PMID: 38286051 DOI: 10.1016/j.jhazmat.2024.133602] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Cationic organic polymers have found relatively extensive utility for TcO4-/ReO4- removal, but the harsh preparation conditions constrain their practical application. The bifunctional guanidinium-based cationic organic polymer (GBCOP) was successfully and facilely synthesized in benign conditions within 1 h. Batch experiments showed that GBCOP exhibited rapid removal kinetics (1 min, >98.0%) and a substantial removal capacity of 536.8 mg/g for ReO4-. Even in 1000-fold co-existing NO3- anions, the removal efficiency of GBCOP for ReO4- was 74.0%, indicating its good selectivity. Moreover, GBCOP had high removal efficiencies for ReO4- across a wide pH (3.0-10.0) range and presented remarkable stability under the conditions of strong acid and base. GBCOP could be reused four times while removing 80.8% ReO4- from simulated Hanford wastewater. SEM and XPS results revealed that the mechanism of ReO4- removal involved Cl- ion exchange within the channels of GBCOP. Theoretical calculation results supported that existing the strong electrostatic interaction between guanidinium and ReO4-. This dual-function GBCOP material is cost-effective and holds significant potential for large-scale preparation, making it a promising solution for TcO4- removal from nuclear wastewater.

Flexible self-supporting Na3MnTi(PO4)3@C fibers for uranium extraction from seawater by electro sorption

As an eco-friendly technique with the superior adsorption performance, electroadsorption has shown great potential for application in uranium (U(VI)) recovery in recent years. However, the electrodes used in the electrosorption generally suffer the adsorbent to be loaded on the conductors, which greatly limited the adsorption performance of the electrodes for uranyl ions. In present study, a flexible self-supporting Na3MnTi(PO4)3@C fibers (NMTP@C fibers) electrode material was rationally designed and prepared by electrostatic spinning method and annealing technique, and its ability to capture U(VI) efficiently was preliminarily demonstrated by batch adsorption and electro sorption. The plentiful phosphate groups provide sufficient active sites for adsorption, while the axially continuous electron conduction and radially short-range ion transport give NMTP@C fibers fast charge/ion transport capability. The NMTP@C fiber can remove 99% of 5 ppm U(VI) in seawater by electro absorption within 1 h. After several cycles of adsorption under seawater conditions, the adsorbent can still maintain a stable adsorption capacity. The adsorption mechanism of NMTP@C nanofibers for U(VI) was investigated by XPS, FT-IR, Raman, SEM-EDS, and XRD, which was electrostatic interactions and surface complexation. These results suggest that NMTP@C fibers are promising high-capacity adsorbents for efficient and selective capture of U(VI) from seawater.

Electro-intensified simultaneous decontamination of coexisting pollutants in wastewater

The treatment of wastewater has become increasingly challenging as a result of its growing complexity. To achieve synergistic removal of coexisting pollutants in wastewater, one promising approach involves the integration of electric fields. We conducted a comprehensive literature review to explore the potential of integrating electric fields and developing efficient electro-intensified simultaneous decontamination systems for wastewater containing coexisting pollutants. The review focused on comprehending the applications and mechanisms of these systems, with a particular emphasis on the deliberate utilization of positive and negative charges. After analyzing the advantages, disadvantages, and application efficacy of these systems, we observed electro-intensified systems exhibit flexible potential through their rational combination, allowing for an expanded range of applications in addressing simultaneous decontamination challenges. Unlike the reviews focusing on single elimination, this work aims to provide guidance in addressing the environmental problems resulting from the coexistence of hazardous contaminants.

Polyphosphonate-segmented macroporous organosilicon frameworks for efficient dynamic enrichment of uranium with in-situ regeneration

Efficient separation and enrichment of uranium from radioactive effluents is of strategic significance for sustainable development of nuclear energy and environmental protection. Macropore structure of adsorbent is conducive to accessibility of the pore and transport of the adsorbate during dynamic adsorption. However, the low specific surface area results in fewer ligand sites and subsequently reduces the adsorption capacity. Herein, we present a novel strategy for efficient dynamic uranium enrichment using polyphosphonate-segmented macroporous organosilicon frameworks (PMOFs). PMOFs are constructed through the copolymerization of diethyl vinylphosphonate and triethoxyvinylsilane, followed by hydrolysis and condensation of the oligomers. The introduction of polyphosphonate segments into the frameworks endows PMOFs with a macroporous structure (31 µm) and a high ligand content (up to 72 wt%). Consequently, the optimized PMOF-3 demonstrated an ultrahigh dynamic adsorption capacity of 114.8 mg/g among covalently conjugated silicon-based materials. Additionally, PMOF-3 achieves a high enrichment factor (120) in the dynamic enrichment of uranium on a fixed bed column, which can be in-situ regenerated with 1 M NaHCO₃ as the eluent. This work presents a new strategy for efficient dynamic enrichment of nuclides, which can be extended to the separation of other specific pollutants, shedding new light on adsorbent design and technical innovation.

Ultra-stable 3D pyridinium salt-based polymeric network nanotrap for selective 99TcO4-/ReO4- capture via hydrophobic and steric engineering

Selective capture of radioactive ⁹⁹TcO₄^- from highly alkaline nuclear waste is highly desirable for environmental remediation and waste disposal. However, the combined features of adsorbents with excellent chemical stability and high capture selectivity for ⁹⁹TcO₄^- have not yet been achieved. Herein, we report an ultra-stable 3D pyridinium salt-based polymeric network (TMP-TBPM) nanotrap with remarkable radiation, acid and base stability for selective capture of ReO₄^- via hydrophobic engineering and steric hindrance, a non-radioactive surrogate of ⁹⁹TcO₄^-. The batch capture experiments show that TMP-TBPM has high capture capacity (918.7 mg g^-1) and fast sorption kinetics (94.3 % removal in 2 min), which can be attributed to the high density of pyridinium salt-based units on the highly accessible pore channels of 3D interconnected low-density skeleton. In addition, the introduction of abundant alkyl and tetraphenylmethane units into the 3D framework not only greatly enhanced the hydrophobicity and stability of TMP-TBPM, but also significantly improved the affinity toward ⁹⁹TcO₄^-/ReO₄^-, enabling reversible and selective capture of ⁹⁹TcO₄^-/ReO₄^- even under highly alkaline conditions. This study exhibits the great potential of 3D pyridinium salt-based polymeric network nanotrap for ⁹⁹TcO₄^-/ReO₄^- capture from highly alkaline nuclear waste, providing a new strategy to construct high-performance cationic polymeric sorbents for radioactive wastewater treatment.

Olefin-linked cationic covalent organic frameworks for efficient extraction of ReO4-/99TcO4. JOURNAL OF HAZARDOUS MATERIALS 2023;446:130603. [PMID: 36580784 DOI: 10.1016/j.jhazmat.2022.130603]

Efficient extraction of radioactive ⁹⁹TcO₄^- from strong acid/base solutions by porous adsorbents is extremely desirable but remains a great challenge. To overcome the challenge, here we report the first example of an olefin-linked cationic covalent organic framework (COF) named BDBI-TMT with excellent acid, base and radiation stability is synthesized by integrating robust imidazolium salt-based linkers with triazine building blocks. BDBI-TMT shows an ultra-fast adsorption kinetics (equilibrium is reached within 1 min) and an excellent ReO₄^- (a non-radioactive surrogate of ⁹⁹TcO₄^-) capture capacity of 726 mg g^-1, which can be attributed to the abundance of precisely tailored imidazolium salt-based units on the highly accessible pore walls of the ordered pore channels. Furthermore, the formation of the highly conjugated bulky alkyl skeleton enhances the hydrophobicity of BDBI-TMT, which significantly improves not only the affinity toward ReO₄^-/⁹⁹TcO₄^- but also the chemical stability, allowing selective and reversible extraction of ReO₄^-/⁹⁹TcO₄^- even under extreme conditions. This work demonstrates the great potential of olefin-linked cationic COFs for ReO₄^-/⁹⁹TcO₄^- extraction, providing a new avenue to construct high-performance porous adsorbents for radionuclide remediation.

Rational design, structure properties, and synthesis strategies of dual-pore covalent organic frameworks (COFs) for potent applications: A review

Dual-pore covalent organic frameworks (COFs) offer a molecular scaffold for introducing building blocks into periodically organized polygonal skeletons to produce fascinating structural features. The rapid development of this material has attracted intensive interest from researchers with diverse expertise. This review selects the leading scientific findings about dual-pore COFs and highlights their functions and perspectives on design, structure properties, and synthesis strategies. Dual-pore COFs, as newly hetero-pore COFs by integrating particular pores into one polygonal skeleton, have been compared to conventional COFs. Dual-pore COFs display hierarchical/heterogeneous porosities and homogeneous porosity, which endow them with exceptional features involving mass diffusion, charge transfer, and large surface area with abundant active sites. Additionally, the strategic dual-pore design by opting for different approaches, such as integration of [D_2h + C₂] symmetries, kagome-type lattices, and other symmetric arrangements of monomers, are inclusively discussed. Identification and construction of dual-pores in COFs via optimal synthetic methods, such as desymmetrization, multiple linking sites, and orthogonal reactions, are highlighted as the primary pore engineering routes to simultaneously regulate the growth and alter the characteristics of COFs for promising applications. Lastly, a focused discussion on various challenges and critical fundamentals of dual-pore engineering is successfully outlined, with potential prospects of introducing dual-pore in COFs.

Self-propelled nanomotors based on hierarchical metal-organic framework composites for the removal of heavy metal ions

The outstanding performance efficiency for the removal of heavy metal ions in solution is governed by various factors: (a) sufficient contact probability between heavy metal ions and the adsorbent, (b) convenient diffusion/accessibility of heavy metal ions to the surface and the interior of the adsorbent, and (c) abundant binding sites for heavy metal ions on the adsorbent. We designed an efficient MnFe₂O₄ @MIL-53 @UiO-66 @MnO₂ adsorbent for Pb(II) and Cd(II) removal. The adsorbents were fabricated by merging self-propelled nanomotors, exploiting hierarchical structure, and using a metal-organic framework (MOF) composite to simultaneously meet the three requirements. The sufficient contact probability between Pb(II)/Cd(II) and MnFe₂O₄ @MIL-53 @UiO-66 @MnO₂ was achieved via the self-propelled movement of MnFe₂O₄ @MIL-53 @UiO-66 @MnO₂ which was induced by the catalytic decomposition of H₂O₂ by MnO₂. The convenient diffusion/accessibility of Pb(II)/Cd(II) on the surface and interior of MnFe₂O₄ @MIL-53 @UiO-66 @MnO₂ was achieved by exploiting the properties of the hierarchical structure of MnFe₂O₄ @MIL-53 @UiO-66 @MnO₂. Abundant binding sites (-COOH) on MIL-53 and UiO-66 composites were present for the binding of the Pb(II)/Cd(II) ions to the adsorbent. The adsorption capacities of the nanomotor adsorbent for Pb(II) and Cd(II) were 1018 and 440.8 mg g^-1 at 25 °C, respectively. Additionally, the complex formed of MnFe₂O₄ and MIL-53 endowed the adsorbent with easy-recyclable properties under the influence of an external magnet. The nanomotors exhibit satisfactory removal performances for Pb(II) and Cd(II).