Road sediment, an underutilized material in environmental science research: A review of perspectives on United States studies with international context

Systematic evaluations of receptor models in source apportionment of particulate solids in road deposited sediments: A practical application for tracking heavy metal sources on urban road surfaces

Receptor models have been widely used to identify pollution sources in the urban environment. However, evaluating the accuracy of source apportionment results for road deposited sediments (RDS) using these models has not been the focus of previous studies. This study compared canonical receptor models, i.e., positive matrix factorization (PMF), Unmix, chemical mass balance (CMB) and chemical mass-balance based stochastic approach (SCMD) using six synthetic datasets generated from real-world source profiles, and three error evaluation indicators (ie., relative error (RE), relative prediction error (RPE), and symmetric mean absolute percentage error (SMAPE)) were employed. The SCMD model showed more stable and accurate results, with ranges from 8.48 % - 30.76 %, 16.32-32.34 %, and 7.81-24.55 % of RE, RPE, and SMAPE, respectively. SCMD was then applied for tracking Pb, Zn, Cr, Cu, Ni, and Mn on urban road surfaces in Guangzhou, China. The results showed that vehicle exhaust, tire wear, roadside soil, and brake wear contributed 50.15 %, 41.15 %, 6.84 %, and 1.86 % of the mass of particulate solids, respectively; vehicle exhaust contributed more than half of these six heavy metals, particularly Cr and Ni. These findings provide scientific support for the effective selection of appropriate receptor models for source apportionment in RDS.

Separation and preparation of nanoparticles of urban dust for biological studies

Nanoparticles (NPs) of urban dust pose a potential threat to public health. Nevertheless, this issue remains largely unexplored due to a lack of biological research related to these NPs. This may be attributed to the complexity of the separation, characterization, analysis, and subsequent preparation of NPs of urban dust for biological studies. In the present work, the methodology for the separation and preparation of NPs of urban dust for biological assays has been developed. The isolation of NPs from bulk samples of urban dust has been carried out using coiled tube field-flow fractionation, which allows one to recover a fraction of NPs, which is sufficient for further research. The weight of the recovered fraction of NPs was 0.42 ± 15 mg; the mean size of particles in the fraction was 220 nm. Albumin was employed as a stabilizing agent for NPs, a phosphate buffer solution simulated physiological salt concentrations. The isolated NPs were found to contain microorganisms, and a sterilization procedure was therefore applied. A 5 min UV treatment ensured sterilization of the suspension of NPs. Ultrafiltration was used to pre-concentrate NPs of urban dust required for biological studies; the ultrafiltration procedure did not affect the stability of the NPs suspension. The concentrations of toxic elements like Cu, Zn, As, Mo, Cd, Sn, Sb, Hg, Pb and Bi in the obtained NPs were found to be up to 10 times higher than in the bulk dust samples, indicating a potential health threat. The proposed procedure for the separation and preparation of NPs of urban dust can serve as a reliable basis for further biological studies.

The relationship between the inhalation bioaccessibility of potentially toxic elements in road dust from a heavily polluted industrial area and the source of their pollution

One of the sources of chronic exposure to potentially toxic elements (PTE), especially in polluted environments, is the inhalation of resuspended road dust (RD). The aim of this study is to assess the inhalation bioaccessibility of PTE in RD from highly polluted environments from mining/smelting industries and traffic, and to identify any correlations between the bioaccessibility fraction of PTE and the physicochemical characteristics of the particles. RD from the studied area contains extremely high total concentrations of Cr, V, and Mn, which are likely due to pollution from the smelting industry. Additionally, elevated total concentrations of other elements associated with traffic emissions including Zn, Cu, Pb, Sb, and Sn were also measured. The bioaccessibility of PTE was assessed using two synthetic extraction solutions - Gamble's solution (GS) and Artificial Lysosomal Fluid (ALF). The majority of elements showed negligible bioaccessibility in GS. However, quite high inhalation bioaccessibility was observed for Zn, Pb, Sb, Cd, and Mn in the ALF solution, with a mean bioaccessible fraction of 49, 51.5, 41, 50, and 40% respectively. The highest bioavailable fraction was measured for Cd (97%) in a sample collected near a steel production facility and for Pb (95%) in a sample collected near the highway. These results indicate that increased mobility of the elements in inhaled particles occurs only in the case of phagocytosis. The lowest inhalation bioavailability was measured for Cr (mean is 3%). Differential individual particle analysis revealed that about 60% of phases, mostly major (Cr,Ti,V)-bearing metallic alloys, silicates, oxides and sulphides, are stable in ALF solution, while 40% of phases, mostly (Fe,Ca,Mn)-bearing oxides, silicates, sulphides, metals and metallic alloys originating from steel production, ferrochrome, ferrosilicon and vanadium production and from traffic emissions have been heavily corroded or completely dissolved. The study provides valuable information to further assess health hazards from various emission sources.

Nanoparticles of dust as an emerging contaminant in urban environments

Due to very high mobility in the environment and penetration ability into living organisms, nanoparticles (NPs) of urban dust pose a potential threat to human health and urban ecosystems. Currently, data on the chemical composition of NPs of urban dust, their fate in the environment, and corresponding risks are rather limited. In the present work, NPs of deposited urban dust have been comprehensively studied for the first time; NPs isolated from 78 samples of dust collected in Moscow, the largest megacity in Europe, being taken as example. The elemental composition, potential sources as well as environmental, ecological, and health risks of NPs of urban dust are assessed. It is found that dust NPs are extremely enriched by Cu, Hg, Zn, Mo, Sb, and Pb, and can serve as their carrier in urban environments. No regularities in the spatial distribution of elements have been found, probably, due to high mobility of dust NPs. High ecological and health risks caused by dust NPs are demonstrated. Source apportionment study has evaluated one natural and two anthropogenic sources of elements in NPs of urban dust; the contribution of natural and anthropogenic sources being comparable. It is also shown that dust NPs may be considered as an important carrier of trace elements in urban aquatic systems. Additionally, the risks associated with NPs and bulk samples of dust have been compared. The observed risks associated with NPs are significantly higher.

Phytochemicals Involved in Mitigating Silent Toxicity Induced by Heavy Metals

Heavy metals (HMs) are natural elements present in the Earth's crust, characterised by a high atomic mass and a density more than five times higher than water. Despite their origin from natural sources, extensive usage and processing of raw materials and their presence as silent poisons in our daily products and diets have drastically altered their biochemical balance, making them a threat to the environment and human health. Particularly, the food chain polluted with toxic metals represents a crucial route of human exposure. Therefore, the impact of HMs on human health has become a matter of concern because of the severe chronic effects induced by their excessive levels in the human body. Chelation therapy is an approved valid treatment for HM poisoning; however, despite the efficacy demonstrated by chelating agents, various dramatic side effects may occur. Numerous data demonstrate that dietary components and phytoantioxidants play a significant role in preventing or reducing the damage induced by HMs. This review summarises the role of various phytochemicals, plant and herbal extracts or probiotics in promoting human health by mitigating the toxic effects of different HMs.

Assessment of heavy metals mobilization in road-deposited sediments induced by COVID-19 disinfection

Road-deposited sediments (RDS) on urban impervious surfaces are important carriers of heavy metals (HMs), and can contribute to urban runoff pollution. With the outbreak of COVID-19, chlorinated disinfectants (CDs) have been extensively sprayed on these surfaces. This practice may have a superposed or priming effect on HMs contaminants in RDS, yet this remains unknown. This study examined the effects of seven CDs concentration gradients (0, 250, 500, 1000, 2000, 5000, 60,000 mg/L) on the leaching and chemical forms of HMs (Cd, Cr, Ni, Pb, and Zn) in seven particle size fractions (<44, 44-63, 63-105, 105-149, 149-250, 250-450, 450-1000 μm). The results showed that CDs can promote the leaching of HMs in RDS, at the recommended CDs dose (2000 mg/L), except for Pb, the leaching amounts increased by 21.8%-237.2% compared with the untreated RDS. The alteration in the leaching were primarily attributed to the redistribution of chemical forms of HMs in RDS, specifically, the acid-extractable fractions percentage increased by 0.23%-24.39%, and the reducible fractions percentages decreased by 3.21%-38.35%. The lower oxidation-reduction potential (ORP) and alkalinity of CDs as strong oxidants were responsible for the redistribution of forms. The leaching and chemical forms of HMs vary among different particle sizes, but in any case, finer particle sizes (< 105 μm) still dominate their contribution. The current control measure of street sweeping is ineffective in removing these particles. These findings will facilitate the development of strategies for controlling urban diffuse pollution from RDS during the pandemic. Finally, this study suggests potential directions for future research.

Terrestrial nanoparticle contaminants and geospatial optics using the Sentinel-3B OLCI satellite in the Tinto River estuary region of the Iberian Peninsula

The Tinto River is known globally for having a reddish color due to the high concentration of dissolved metals in its waters. The general objective of this study is to analyze the dispersion of nanoparticles (NPs) and ultra-fine particles in terrestrial and geospatial suspended sediments (SSs) using Sentinel-3B OLCI (Ocean Land Color Instrument) satellite images; by examining water turbidity levels (TSM_NN), suspended pollution potential (ADG_443_NN) and presence of chlorophyll-a (CHL_NN). The images were collected in the estuary of the Tinto River, in the city of Nerva, Spanish province of Huelva, between 2019 and 2021. The following hazardous elements were identified in nanoparticles and ultra-fine particles by FE-SEM/EDS: As, Cd, Ni, V, Se, Mo, Pb, Sb and Sn. Sentinel-3B OLCI satellite images detected a 2019 TSM_NN of 23.47 g^-3, and a 2021 reading of 16.38 g^-3.

Lead and chromium in European road paints

Lead chromate was commonly employed as a pigment in coloured road markings until restrictions led to the development of safer alternatives. In this study, the presence and concentrations of Pb and Cr have been determined in 236 road paints of various colours sampled from streets, highways, footways and carparks from eleven European countries. According to energy-dispersive X-ray fluorescence spectrometry, Pb was detected (>10 mg kg^-1) in 148 samples at concentrations up to 17.2% by weight, and above 1000 mg kg^-1 yellow was the dominant paint colour. Lead concentrations on an area basis varied from 0.02 to 8.46 mg cm^-2 and the metal was located at different depths amongst the samples, suggesting that formulations had been painted both recently and historically (and overpainted). Chromium was detected (>5 to 50 mg kg^-1) in 81 samples at concentrations between 20 and 20,000 mg kg^-1 and most often in yellow paints, and concentrations co-varied with those of Pb. These observations, and results of scanning electron microscopy coupled with energy-dispersive X-ray spectrometry, suggested that heterogeneously dispersed PbCrO₄ was the dominant, but not the only, Pb-based pigment in the samples. Although there were significant international differences in frequency of Pb detection and median Pb concentrations, overall, and despite various, albeit complex, regulations, recent or extant road paint pigmented with Pb and Cr remains a pervasive environmental problem and a potential health risk in many European countries.