Monodispersed CaCO3@hydroxyapatite/magnetite microspheres for efficient and selective extraction of benzoylurea insecticides in tea beverages samples

Ionic liquid introduced NH2-MIL-53(Al) mixed matrix membrane coupled with UPLC-MS/MS for the simultaneous determination of neonicotinoid insecticides and their metabolites in different samples

In this study, a novel hydroxyl-functionalized imidazolium-based ionic liquid introduced metal-organic framework (OH-IL@NH2-MIL-53(Al)) was prepared for the extraction of multiple neonicotinoids (NEOs) and their metabolites. The functionalization of ionic liquid obviously enhanced the generate affinity of OH-IL@NH2-MIL-53(Al) towards NEOs and their metabolites through the pre-designed hydrogen-bonding and cation-π electron donor-acceptor interactions. Adsorption studies of OH-IL@NH2-MIL-53(Al) showed rapid adsorption rates and excellent adsorption capacities (129.3-204.2 mg/g). Furthermore, OH-IL@NH2-MIL-53(Al)-based mix matrix membrane (MMM), named OH-IL@NH2-MIL-53(Al)-MMM, was prepared for dispersive membrane extraction (DME). The supporting of MMM integrated the OH-IL@NH2-MIL-53(Al) powder, greatly simplifying the extraction procedure. A OH-IL@NH2-MIL-53(Al)-MMM-based DME-UPLC-MS/MS with good linearity (R2 ≥ 9987), low limits of detection (LODs, 0.001-0.120 ng/mL), and large enrichment factors (75-112) was developed. Based on the designed adsorbent, this work provides an easy and efficient method for the simultaneous analysis of fourteen NEOs and their metabolites in different samples and achieved satisfactory spiked recoveries (70.1-113.6 %).

UiO-66 with missing cluster defects for high-efficient extraction and enrichment of benzoylurea insecticides

The creation of defects in crystalline structures can tune metal-organic frameworks (MOFs) properties, such as improving their adsorptive and catalytic performance with producing more porosity and active sites. In this work, the bimetallic UiO-66 containing Zn and Zr was prepared. And then UiO-66 with missing cluster defects (UiO-66-1/3) were obtained by acid washing to remove the Zn nodes. UiO-66-1/3 was used as sorbent of dispersive solid-phase extraction (dSPE) to extract and enrich (BUs). Combination with high-performance liquid chromatography-diode array detector (HPLC-DAD) was developed to detect trace BUs in soil samples. Adsorption equilibrium can be reached in 3 min. The method possesses high enrichment factor (202-325), low detection limit (0.005-0.04 ng·mL-1), and wide linear range (0.02-200 ng·mL-1). In addition, the recovery rate of UiO-66-1/3 as an adsorbent was still higher than 95% after reused for 16 times. This work provides a new material for the enrichment and detection of benzoylurea insecticides in the environment.

Fabrication of fluorinated magnetic microporous organic network for selective and efficient extraction of benzoylurea insecticides in tea beverages

In this work, a novel fluorinated magnetic microporous organic network (Fe3O4@FMON) was exquisitely designed and synthesized for highly efficient and selective magnetic solid phase extraction (MSPE) of fluorinated benzoylurea insecticides (BUs) from complex tea beverage samples. The Fe3O4@FMON exhibited good extraction for BUs via the pre-designed hydrophobic, π-π stacking, hydrogen bonding and specific FF interactions. A sensitive Fe3O4@FMON-based MSPE-HPLC-UV method with wide linear range (0.10-1000 μg L-1, R2 ≥ 0.996), low limits of detection (0.01-0.02 μg L-1), and large enrichment factors (85.6-98.0) for BUs from tea beverage samples was developed. By decorating F elements within MON's networks, the Fe3O4@FMON characterized good hydrophobicity and chemical stability, which could be reused at least 8 times without decrease of recoveries. This work demonstrated the great prospects of Fe3O4@FMON for enriching trace BUs from complex substrates and triggered the potential of FMON for sample pretreatment of fluorinated analytes.

Advanced applications of hydroxyapatite nanocomposite materials for heavy metals and organic pollutants removal by adsorption and photocatalytic degradation: A review

This comprehensive review delves into the forefront of scientific exploration, focusing on hydroxyapatite-based nanocomposites (HANCs) and their transformative role in the adsorption of heavy metals (HMs) and organic pollutants (OPs). Nanoscale properties, including high surface area and porous structure, contribute to the enhanced adsorption capabilities of HANCs. The nanocomposites' reactive sites facilitate efficient contaminant interactions, resulting in improved kinetics and capacities. HANCs exhibit selective adsorption properties, showcasing the ability to discriminate between different contaminants. The eco-friendly synthesis methods and potential for recyclability position the HANCs as environmentally friendly solutions for adsorption processes. The review acknowledges the dynamic nature of the field, which is characterized by continuous innovation and a robust focus on ongoing research endeavors. The paper highlights the HANCs' selective adsorption capabilities of various HMs and OPs through various interactions, including hydrogen and electrostatic bonding. These materials are also used for aquatic pollutants' photocatalytic degradation, where reactive hydroxyl radicals are generated to oxidize organic pollutants quickly. Future perspectives explore novel compositions, fabrication methods, and applications, driving the evolution of HANCs for improved adsorption performance. This review provides a comprehensive synthesis of the state-of-the-art HANCs, offering insights into their diverse applications, sustainability aspects, and pivotal role in advancing adsorption technologies for HMs and OPs.

Alien species water hyacinth realizes waste into treasure: The preparation of biomass sorbent to determine benzoylurea insecticides in tea products

A fast and effective analytical method with biomass solid-phase microextraction sorbent combined with a high-performance liquid chromatography-ultraviolet detector was proposed for the determination of benzoylurea (BU) insecticides in tea products. The novel sorbent was prepared by activating and then carbonizing water hyacinth with a fast growth rate and low application value as raw material and showed a high specific surface area and multiple interactions with analytes, such as electrostatic action, hydrogen bonding, and π-π conjugation. After optimizing the three most important extraction parameters (pH [X1], sample loading rate [X2], and solution volume [X3]) by Box-Behnken design, the as-established analytical method showed good extraction performance: excellent recovery (80.13%-106.66%) and wide linear range (1-400 µg/L) with a determination coefficient of 0.9992-0.9999, a low limit of detection of 0.02-0.1 µg/L and the satisfactory practical application results in tea products. All these indicate that the water hyacinth-derived material has the potential as a solid-phase extraction sorbent for the detection and removal of BU insecticides from tea products, and at the same time, it can also achieve the effect of rational use of biological resources, maintaining ecological balance, turning waste into treasure, and achieving industrial production.

Preparation and extraction property study of corn cob-like magnetic mosaic carbon materials derived from MOF-on-MOF composites

BACKGROUND

Large accumulations of pesticide residues in the environment eventually enter the human body with food. Based on magnetic solid-phase extraction (MSPE) technology, it is possible to achieve efficient extraction of trace pesticide residues in foodstuffs, and the construction of MSPE adsorbents with excellent magnetic properties and many active sites is still one of the main research topics. Based on this, we developed a new strategy for the preparation of "MOF-on-MOF" composites, which were carbonized and used as adsorbents for the extraction of pesticide residues in cereals.

RESULTS

A novel corn cob core-shell composite Fe2O3@C@ZIF-8 was created by embedding ZIF-8 onto the surface of Fe2O3@C derived from MIL-88A(Fe), and used for the extraction of benzoylurea insecticides(BUs) from cereals. The adsorption behaviour between Fe2O3@C@ZIF-8 and BUs was investigated by static and kinetic experiments and the adsorption mechanism was elaborated. For the trace analysis of BUs, a magnetic solid-phase extraction combined with high performance liquid chromatography-ultraviolet detector (HPLC-UV) approach was also developed. Under the optimized experimental conditions, the limits of detection and quantification were 0.015-0.03 μg L-1 and 0.05-0.1 μg L-1, and the relative standard deviations for the intra-day and inter-day ranges were 1.82%-2.13 % and 3.85%-4.59 %, respectively. The spiked recoveries of the four cereals ranged from 82.72% to 104.45 %. After 10 cycles of use of Fe2O3@C@ZIF-8, the recoveries of BUs ranged from 77.90% to 96.74 %.

SIGNIFICANCE

The analytical method based on Fe2O3@C@ZIF-8 as adsorbent has a low limit of detection, a wide linear range and is highly applicable to the analysis of real samples. In addition, the strategy developed in this study for the preparation of thermoplastic polymer-assisted "MOF-on-MOF" composites has promising applications.

In situ growth of ZIF-67 to construct core-shell mosaic structural composites for efficient extraction of benzoylurea insecticides

A novel mosaic structure Silica@C/Co@ZIF-67 composite was synthesized by successfully embedding Co nanoparticles on the surface of silica spheres with the help of thermoplastic polyethyleneimine by carbon-reduction. The ZIF-67 half-shell layer structure was synthesized by the in-situ growth of ZIF-67 on the surface of silica spheres through the coordination of 2-methylimidazole with Co metal nodes. The composite was used as a magnetic solid-phase extraction adsorbent combined with high performance liquid chromatography-ultraviolet detector (HPLC-UV) for the extraction and determination of benzoylurea insecticides (BUs) in vegetables and tea. Based on the presence of π-π, hydrophobic and hydrogen bonding interactions between Silica@C/Co@ZIF-67 and BUs, the BUs were rapidly captured by the composites resulting in high adsorption performance. Under the optimal extraction parameters, the linear ranges were 0.3-200 µg L-1 for diflubenzuron, 0.6-200 µg L-1 for chlorbenzuron, and 1.0-200 µg L-1 for triflumuron, teflubenzuron, and flufenoxuron, with correlation coefficients (R2) greater than 0.9991. The limits of detection (LODs) of the method were 0.1-0.3 μg L-1, and the relative standard deviations (RSDs) were 1.2-3.0% for intra-day and 2.6-4.6% for inter-day. In the spiked recovery experiments of vegetables and tea, the recoveries of the five kinds of BUs ranged from 75.8 to 112.9%. In addition, after 10 repetitions using Silica@C/Co@ZIF-67, the recoveries of the five kinds of BUs were still as high as 78.4 to 83.9%.

Rationally designed calcium carbonate multifunctional trap for contaminants adsorption

Adsorption technology has been widely developed to control environmental pollution, which plays an important role in the sustainable development of modern society. Calcium carbonate (CaCO3) is characterized by its flexible pore design and functional group modification, which meet the high capacity and targeting requirements of adsorption. Therefore, its charm of "small materials for great use" makes it a suitable candidate for adsorption. Firstly, we comprehensively review the research progress of controlled synthesis and surface modification of CaCO3, and its application for adsorbing contaminants from water and air. Then, we systematically examine the structure-effect relationship between CaCO3 adsorbents and contaminants, while also intrinsic mechanism of remarkable capacity and targeted adsorption. Finally, from the perspective of material design and engineering application, we offer insightful discussion on the prospects and challenges of calcium carbonate adsorbents, providing a valuable reference for the further research in this field.

Ionic liquid-modified UiO-66-NH2 as sorbent of dispersive solid-phase extraction for rapid adsorption and enrichment of benzoylurea insecticides

Ionic liquid (IL)-modified UiO-66-NH2 composite was prepared and used as sorbent of dispersed solid-phase extraction (dSPE) for extracting trace benzoylurea insecticides (BUs) from complex environmental matrices. The IL in framework endowed the prepared material had electropositive characteristics, which can produce interaction with electron rich guest molecules, such as BUs. The high thermal and chemical stability of UiO-66-NH2/IL enabled it to be reused for 16 times without significant reduction in adsorption performance. Due to the multiple forces including π-π, hydrogen bonding, and fluorine-fluorine interaction, UiO-66-NH2/IL showed good adsorption performance, short adsorption time (20 s) and rapid desorption ability (60 s) for BUs. Under the optimal conditions, the method exhibited wide linear range (0.02-500 ng mL-1) with correlation coefficient (R2) not worse than 0.9928, high enrichment factor (252-300), and low detection limit (0.005-0.4 ng mL-1). The dispersed solid phase extraction coupling with high-performance liquid chromatography-diode array detector (dSPE-HPLC-DAD) was successfully used to detection of BUs in real environmental samples and satisfactory recoveries were obtained (80.5%±2.4-118%±3.2). The results indicated that UiO-66-NH2/IL composite can be a potential sorbent for the preconcentration of trace insecticides in environmental samples.

Magnetic functionalized graphene oxide combined with ultra-high performance liquid chromatography for trace detection of succinate dehydrogenase inhibitor fungicides in food

In this study, an efficient, sensitive, and convenient magnetic solid-phase extraction method combined with ultra-high performance liquid chromatography-tandem mass spectrometry (MSPE-UHPLC-MS/MS) was developed for the simultaneous determination of 19 succinate dehydrogenase inhibitor fungicide residues in six different food matrices The synthesized tetraethylenepentamine magnetic graphene oxide nanocomposite showed the advantages of good dispersibility, large specific surface area (113.93 m2 /g) and large pore volume (0.25 cm3 /g), making it an ideal succinate dehydrogenase inhibitor pretreatment adsorbent. The MSPE-UHPLC-MS/MS method showed linearity in the range of 5.0-800.0 μg/kg, with a correlation coefficient (R2 ) > 0.99, and a limit of quantification of 5 μg/kg. The recovery of succinate dehydrogenase inhibitor fungicides was in the range of 71.2%-119.4%. The MSPE method is simple, rapid, and efficient, making it an ideal alternative to sample pretreatment in the determination of trace succinate dehydrogenase inhibitor fungicides in complex matrices.

Facile synthesis of chitosan-tartaric acid biosorbents for removal of Cu(II) and Cd(II) from water and tea beverages

Consumption of water and tea beverages leads to the intake of heavy metals by humans. Development of technology for decontamination greatly reduces the risks of the heavy metal exposure. In this study, environment-friendly chitosan-tartaric acid biosorbents (CTBs) were synthesized by a facile one-step cross-linking strategy to mitigate the Cu(II) and Cd(II) contamination in water and tea beverages. The cross linkage of tartaric acid and chitosan endowed CTBs with excellent properties in aspects of surface roughness, mechanical strength, and acid resistance. Adsorption performance and mechanism of CTBs were studied, and the Langmuir isotherm model and pseudo-second-order kinetic model were adhered during adsorption. Up to 90 % removal efficiencies of Cu(II) and Cd(II) from water and tea beverages by CTBs were achieved. Moreover, the adsorption showed only a slight reduction in the quality of tea beverages. This study offers a new insight for reduction of heavy metals-pollution in beverages.

Construction of hierarchically porous metal-organic framework HP-UiO-66-30% for sensitive determination of benzoylurea insecticides

Due to widespread application of benzoylurea insecticides (BUs) and its persistence in environment, the effective capture of benzoylurea insecticides residues in environment is an important issue of environmental safety monitoring. To obtain excellent adsorption performance, creating defective structure in metal-organic frameworks (MOFs) can be employed as the method for adjusting its properties. Zirconium(Ⅳ)-based MOF termed as UiO-66-30% was constructed with 2-aminoterephthalic acid (NH₂-BDC) and terephthalic acid (H₂BDC) as building blocks. After calcination and removal of thermal-sensitive ligand (NH₂-BDC), hierarchically porous UiO-66-30% (HP-UiO-66-30%) with multistage pore structure and good stability was obtained. The unique structure of HP-UiO-66-30% endowed it to achieve instantaneous equilibrium (within 2 min) when it was used as a dispersed solid phase extraction (d-SPE) adsorbent to extract BUs from environmental samples, greatly reducing the operation time. A wide linear range (0.05-200 ng mL^-1), good linearity (R² ≥ 0.9980), low detection limits (0.01-0.03 ng mL^-1) and quantification limits (0.05-0.1 ng mL^-1) were obtained for BUs. In addition, the HP-UiO-66-30% material possessed the good reusability and the adsorption capacity did not change significantly over 16 adsorption-desorption cycles. Finally, the established dispersed solid phase extraction-high performance liquid chromatography-diode array detector (d-SPE-HPLC-DAD) method was successfully applied to determination of BUs residues in environmental soil samples. The results demonstrated that HP-UiO-66-30% was an excellent sorbent for extraction BUs from environmental samples.