Effects of foreign metal doping on the step-by-step oxidation process in M-OMS-2 catalyzed activation of PMS

Enhanced Adsorption of Sulfate Radicals through CaO-Induced D-Band Electron Modulation on Transition Metals

The sulfate radical (SO4•-) generated in the heterogeneous persulfate catalyzed oxidation system can be released into the bulk solution or adsorbed on the catalyst surface. The oxidation capacity of the surface adsorbed SO4•- is relatively mild, but this also gives it a longer life cycle and a stronger ability to resist the environmental interference, giving it more potential for practical sewage treatment. However, to date, there is still a lack of effective strategies to regulate its existence state. Herein, a series of MOx-CaO (M = Cu, Co, Ni, etc.) catalysts were prepared by combining CaO with typical transition metal oxides for the purpose of activating peroxymonosulfate. Mechanistic investigations revealed that the strong electron coupling effect between CaO and Cu/Co significantly altered the electronic structure of the composite catalysts, causing a shift in the d-band center relative to the Fermi level. Specifically, compared to Co3O4-CaO (-2.401 eV), the d-band center of CuO-CaO (-1.870 eV) showed a more pronounced downward shift, significantly enhancing the chemisorption capacity for SO4•-. Additionally, the SO4•-adsorbed on the catalyst surface effectively avoids its accumulation in the reaction system and thus improves its utilization efficiency. This study affirms the viability of manipulating the adsorption characteristics of SO4•-onto the catalyst surface. Furthermore, it offers a pivotal strategy for modulating the adsorption dynamics of pertinent reactive oxygen species on the catalyst surface within heterogeneous persulfate reaction systems.

Effect of dissolved oxygen on the peroxymonosulfate activation pathway in an electrochemical Co/P/CA cathode system

Although dissolved oxygen plays an important role in electro-Fenton-like processes, few investigations have revealed its underlying effects in such processes. Herein, the effect of dissolved oxygen on peroxide activation in an electro-Fenton-like system comprising electrochemical cells and peroxymonosulfate (PMS) was investigated. Cobalt phosphide-modified carbon aerogel (Co/P/CA) was used as the cathode material owing to the high conductivity and catalytic activity of Co/P/CA. Several free radicals and their effects on organic pollutant removal were observed using electron paramagnetic resonance spectrometry and quenching experiments, respectively. The observations revealed that in the presence of O2, hydroxyl radical (·OH), superoxide (O2-·), and singlet oxygen (1O2) served as the primary active species in the PMS activation process, while in the presence of N2, ·OH and sulfate radical (SO4-·) served as the dominant active species in this process. The factor responsible for the difference in the PMS activation pathways available under O2 and N2 conditions was investigated using rotating disk electrode tests and free energy calculations. The tests indicated that O2 facilitates PMS activation to form ·OH instead of SO4-·. The dissolved oxygen subsequently underwent a single-electron-reduction reaction and was converted into O2-·, which could serve as a source of 1O2. When N2 was introduced, Co species, particularly Co(II), played a key role in activating PMS. The free radicals ·OH and SO4-· were generated during the PMS activation process. This study clearly demonstrates the mediating catalysis role of dissolved oxygen in electro-Fenton-like system through experimental data and theoretical calculations, thereby positively contributing to future studies regarding the continuous activation of peroxides in composite systems and improvement of the efficiency of waterbody remediation.

Design of Environmental-Friendly Carbon-Based Catalysts for Efficient Advanced Oxidation Processes

Advanced oxidation processes (AOPs) represent one of the most promising strategies to generate highly reactive species to deal with organic dye-contaminated water. However, developing green and cost-effective catalysts is still a long-term goal for the wide practical application of AOPs. Herein, we demonstrated doping cobalt in porous carbon to efficiently catalyze the oxidation of the typically persistent organic pollutant rhodamine B, via multiple reactive species through the activation of peroxymonosulfate (PMS). The catalysts were prepared by facile pyrolysis of nanocomposites with a core of cobalt-loaded silica and a shell of phenolic resin (Co-C/SiO2). It showed that the produced 1O2 could effectively attack the electron-rich functional groups in rhodamine B, promoting its molecular chain breakage and accelerating its oxidative degradation reaction with reactive oxygen-containing radicals. The optimized Co-C/SiO2 catalyst exhibits impressive catalytic performance, with a degradation rate of rhodamine B up to 96.7% in 14 min and a reaction rate constant (k) as high as 0.2271 min-1, which suggested promising potential for its practical application.

One-pot solvothermal synthesis of Cu-Fe-MOF for efficiently activating peroxymonosulfate to degrade organic pollutants in water:Effect of electron shuttle

Persulfate-based advanced oxidation processes (PS-AOPs) show a bright prospect in sewage purification. The development of efficient catalysts with simple preparation process and eco-friendliness is the key for their applying in practical water treatment. Herein, a bimetallic Cu-Fe metal organic framework (MOF) was simply synthesized by using one-pot solvothermal methods and employed for activating peroxymonosulfate (PMS) to degrade organic pollutants in water. The Cu-Fe-MOF/PMS exhibited excellent degradation efficiencies (over 95% in 30 min) for a variety of pollutants, including phenol, bisphenol A, 2,4-dichlorophenol, methyl blue, rhodamine B, tetracycline and sulfamethoxazole. The degradation efficiency was impacted by dosages of Cu-Fe-MOF, PMS concentrations, reaction temperature, solution pH and anionic species. Phenol could be efficiently decomposed in a wide pH range of 5-9, with the highest degradation and mineralization efficiency of nearly 100% and 70%, respectively. Free radicals and non-free radicals participated in degrading of phenol at the same time, with dominantly free radical process, because sulfate radicals (SO4·-) and hydroxyl radicals (·OH) were the primary active substances by contribution calculation. Cu-Fe-MOF was acted as electron shuttle between molecules of phenol and PMS, and the cooperation effect of Fe and Cu on the Cu-Fe-MOF promoted the electron transfer, achieving the high degradation efficiency of phenol. Thus, Cu-Fe-MOF is an ideal catalyst for activating PMS, which is conducive to promote the applying of catalyst-activated PMS processes for practical wastewater treatments.

Low-temperature molten-salt synthesis of Co3O4 nanoparticles grown on MXene can rapidly remove ornidazole via peroxymonosulfate activation

We further developed previous work on MXene materials prepared using molten salt methodology. We substituted single, with mixed salts, and reduced the melting point from >724 °C to <360 °C. Cobalt (Co) compounds were simultaneously etched and doped while the MXene material was created using various techniques in which Co compounds occur as Co3O4. The synthesized Co3O4/MXene compound was used as a peroxymonosulfate (PMS) activator that would generate free radicals to degrade antibiotic ornidazole (ONZ). Under optimal conditions, almost 100% of ONZ (30 mg/L) was degraded within 10 min. The Co3O4/MXene + PMS system efficiently degraded ONZ in natural water bodies, and had a broad pH adaptation range (4-11), and strong anion anti-interference. We investigated how the four active substances were generated using radical quenching and electron paramagnetic resonance (EPR) spectroscopy. We identified 12 ONZ intermediates by liquid chromatography-mass spectrometry and propose a plausible degradative mechanism.

Remediation of environmentally persistent organic pollutants (POPs) by persulfates oxidation system (PS): A review

Over the past few years, persistent organic pollutants (POPs) exhibiting high ecotoxicity have been widely detected in the environment. Persulfate-oxidation hybrid system is one of the most widely used novel advanced oxidation techniques and is based on the persulfate generation of SO₄^-∙ and ∙OH from persulfate to degrade POPs. The overarching aim of this work is to provide a critical review of the variety of methods of peroxide activation (e.g., light activated persulfate, heat-activated persulfate, ultrasound-activated persulfate, electrochemically-activated persulfate, base-activated persulfate, transition metal activated persulfate, as well as Carbon based material activated persulfate). Specifically, through this article we make an attempt to provide the important characteristics and uses of main activated PS methods, as well as the prevailing mechanisms of activated PS to degrade organic pollutants in water. Finally, the advantages and disadvantages of each activation method are analyzed. This work clearly illustrates the benefits of different persulfate activation technologies, and explores persulfate activation in terms of Sustainable Development Goals, technical feasibility, toxicity assessment, and economics to facilitate the large-scale application of persulfate technologies. It also discusses how to choose the most suitable activation method to degrade different types of POPs, filling the research gap in this area and providing better guidance for future research and engineering applications of persulfates.

Activation of peroxymonosulfate for degrading ibuprofen via single atom Cu anchored by carbon skeleton and chlorine atom: The radical and non-radical pathways

Single atomic Cu catalysts (SACs Cu@C) anchored by carbon skeleton and chlorine atom was synthesized by hydrolyzing Cu-MOFs and then pickled by aqua-regia to remove Cu nanoparticles (NPs Cu). Comparative characterizations revealed that SACs Cu@C was a hierarchically porous nanostructure and Cu dispersed uniformly throughout the carbon skeletons. With less active components, SACs Cu@C behaved better in activating PMS over NPs Cu@C on ibuprofen removal (91.3 % versus 30.2 % in 30 min). Two Cu coordination environments were found by EXAF and DFT calculation, including four-coordinated Cu with 4C atoms and six-coordinated Cu with 4Cu and 2Cl atoms. The obvious interfacial electron delivery between PMS and SACs Cu@C was found, which was enhanced by Cl atom. Cu(I)/Cu(II) redox cycle would donate electron to peroxy bond of PMS for generating OH, SO₄^- and O₂^-. But electron transferred in opposite direction when PMS bonded to Cu atom through its terminal oxygen atom in sulfate, which formed ¹O₂. IBP degradation proceeded through both radical and non-radical route. IBP degradation was inhibited with the presence of TBA, methanol and furfuryl alcohol but accelerated by p-BQ, which could accelerate OH generation. Two degradation pathways were deducted. This study provided a new insight into catalysts designed for PMS activation.