Efficient removal of neonicotinoid by singlet oxygen dominated MoSx/ceramic membrane-integrated Fenton-like process

Highly efficient metal-free electrochemical membrane enables zero-valent sulfur recovery from thiourea wastewater

Electrochemical recovery of zero-valent sulfur (S0) from thiourea (TU) wastewater offers a promising waste-to-value strategy that expects to promote the sulfur resource cycle in water treatment but still suffer from electrode poisoning and sulfur over-oxidation. Herein, we designed a metal-free CNT electrochemical membrane for selective oxidation of thiourea and recovery of S0. We found that defect sites on the carbon nanotube surface enable direct electron transfer for thiourea oxidation and may form carbon-sulfur bridge bonds, thereby facilitating the generation of S0 and urea. When treating real industrial wastewater with a concentration of 83.1 mg L-1 thiourea, the CNT membrane system could achieve a thiourea removal efficiency of 95.4% and a S0 recovery rate of 83.8% at 150 L m-2 h-1. The corresponding treatment energy consumption and S0 recovery energy consumption are 3.3 ± 0.2 kWh kg-TU-1 and 9.9 ± 1.0 kWh kg-S-1, respectively, lower than that of existing commercial electrodes such as Ti/SnO₂-Sb, PbO₂, Ru/IrO₂, and BDD. More importantly, the membrane system exhibits a desirable durability and stability during a 48-h continuous flow operation. Our findings advance the electrochemical membrane design for efficient S0 recovery from thiourea wastewater, contributing to the realization of economical and sustainable waste management and reclaiming resource.

Adsorption-enhanced Fenton catalytic membrane for high-efficiency, high-quality drinking water treatment

To efficiently remove micropollutants from drinking water, this study developed an adsorption-enhanced Fenton catalytic membrane with a two-dimensional structure composed of graphene oxide loaded with iron-cyclodextrin metal-organic frameworks (FeCD-MOF). As water passes through the interlayer channels, micropollutants and hydrogen peroxide (H2O2) are adsorbed into the voids of the FeCD-MOF and the cavities of the CD. This process increases the concentration of micropollutants and H2O2 in the confined space, thereby significantly enhancing the efficiency of the Fenton catalytic reaction. Under a constant flux of 90 L/m2h and influent concentrations of 10 mg/L bisphenol A (BPA) and 3 mM H2O2, the membrane consistently maintained over 97.4 % BPA removal for 72 h. FeCD-MOF's excellent adsorption properties also enhance the stability of the treated water quality. Even with sudden increases in micropollutant concentration or interruptions in oxidant supply, the membrane maintained over 89.7 % BPA removal for an extended period solely through its adsorption capacity. Experimental results demonstrate that the membrane effectively removes various micropollutants, performs stably across a wide pH range, and resists interference from natural organic matter and ions, making it highly promising for drinking water treatment. Furthermore, compared to other MOF materials, FeCD-MOF has a significantly lower cost, enhancing its practicality.

Insight of neonicotinoid insecticides: Exploring exposure, mechanisms in non-target organisms, and removal technologies

Neonicotinoid insecticides (NEOs) have garnered global attention due to their selective toxicity to insects and minimal impact on mammals. However, growing concerns about their extensive use and potential adverse effects on the ecological environment and non-target organisms necessitate further investigation. This study utilized bibliometric tools to analyze Web of Science data from 2003 to 2024, elucidating the current research landscape, identifying key research areas, and forecasting future trends related to NEOs. This paper provides an in-depth analysis of NEO exposure in non-target organisms, including risk assessments for various samples and maximum residue limits established by different countries. Additionally, it examines the impacts and mechanisms of NEOs on non-target organisms. Finally, it reviews the current methods for NEO removal and degradation. This comprehensive analysis provides valuable insights for regulating NEO usage and addressing associated exposure challenges.

Hydrophilic magnetic COFs: The Answer to photocatalytic degradation and removal of imidacloprid insecticide

The widespread use of imidacloprid (IMI) in pest control presents significant environmental challenges due to its persistence and low removal efficiency. This study introduces magnetic Covalent Organic Frameworks (COFs) functionalized with Fe₃O₄ nanoparticles (Fe₃O₄@HMN-COF, Fe₃O₄@MAN-COF, and Fe₃O₄@SIN-COF) as efficient adsorbents for IMI removal from water. These COFs, engineered with nitrogen-rich structures and extensive π-electron systems, achieve superior adsorption through π-π interactions, hydrophobic interactions, and hydrogen bonding. Characterization via FT-IR, XRD, and nitrogen sorption isotherms confirmed their high hydrophilicity, stability, and large surface areas. The magnetic properties of the COFs facilitated easy separation from water, enhancing practicality. Kinetic studies for all COFs indicated a pseudo-second-order model, suggesting chemisorption, with adsorption capacities of 600 mg/g for Fe₃O₄@HMN-COF, 480 mg/g for Fe₃O₄@MAN-COF, and 375 mg/g for Fe₃O₄@SIN-COF. Thermodynamic analyses revealed spontaneous and endothermic adsorption processes. Reusability tests showed minimal capacity loss over multiple cycles, underscoring their practical applicability. Practical tests in honey and fruit samples confirmed high efficacy, demonstrating the COFs' versatility. The study also optimized the photocatalytic degradation of imidacloprid using these COFs, with Fe₃O₄@HMN-COF achieving 98.5 % efficiency under optimal conditions (10 mg L-1 IMI, 0.01 g catalyst dose, pH 11, 30 °C, UV light). These findings highlight the potential of magnetic COFs for sustainable environmental remediation of pesticide-contaminated water.

Tempospatially Confined Catalytic Membranes for Advanced Water Remediation

The application of homogeneous catalysts in water remediation is limited by their excessive chemical and energy input, weak regenerability, and potential leaching. Heterogeneous catalytic membranes (CMs) offer a new approach to facilitate efficient, selective, and continuous pollutant degradation. Thus, integrating membranes and continuous filtration with heterogeneous advanced oxidation processes (AOPs) can promote thermodynamic and kinetic mass transfers in spatially confined intrapores and facilitate diffusion-reaction processes. Despite the remarkable advantages of heterogeneous CMs, their engineering application is practically restricted due to the fuzzy design criteria for specific applications. Herein, the recent advances in CMs for advanced water remediation are critically reviewed and the design flow for tempospatially confined CMs is proposed. Further, state-of-the-art CM materials and their catalytic mechanisms are reviewed, after which the tempospatial confinement mechanisms comprising the nanoconfinement effect, interface effect, and kinetic mass transfer are emphasized, thus clarifying their roles in the construction and performance optimization of CMs. Additionally, the fabrication methods for CMs based on their catalysts and pore sizes are summarized and an overview of their application and performance evaluations is presented. Finally, future directions for CMs in materials research and water treatment, are presented.

Fe-ZSM-5 zeolite catalyst for heterogeneous Fenton oxidation of 1,4-dioxane: effect of Si/Al ratios and contributions of reactive oxygen species

Heterogeneous Fenton oxidation using traditional catalysts with H2O2 for the degradation of 1,4-dioxane (1,4-DX) still presents challenge. In this study, we explored the potential of Fe-ZSM-5 zeolites (Fe-zeolite) with three Si/Al ratios (25, 100, 300) as heterogeneous Fenton catalysts for the removal of 1,4-DX from aqueous solution. Fe2O3 or ZSM-5 alone provided ineffective in degrading 1,4-DX when combined with H2O2. However, the efficient removal of 1,4-DX using H2O2 was observed when Fe2O3 was loaded on ZSM-5. Notably, the Brønsted acid sites of Fe-zeolite played a crucial role during the degradation of 1,4-DX. Fe-zeolites, in combination with H2O2, effectively removed 1,4-DX via a combination of adsorption and oxidation. Initially, Fe-zeolites demonstrated excellent affinity for 1,4-DX, achieving adsorption equilibrium rapidly in about 10 min, followed by effective catalytic oxidative degradation. Among the Fe-ZSM-5 catalysts, Fe-ZSM-5 (25) exhibited the highest catalytic activity and degraded 1,4-DX the fastest. We identified hydroxyl radicals (·OH) and singlet oxygen (1O2) as the primary reactive oxygen species (ROS) responsible for 1,4-DX degradation, with superoxide anions (HO2·/O2·-) mainly converting into 1O2 and ·OH. The degradation primarily occurred at the Fe-zeolite interface, with the degradation rate constants proportional to the amount of Brønsted acid sites on the Fe-zeolite. Fe-zeolites were effective over a wide working pH range, with alkaline pH conditions favoring 1,4-DX degradation. Overall, our study provides valuable insights into the selection of suitable catalysts for effective removal of 1,4-DX using a heterogeneous Fenton technology.

An urchin-shaped covalent organic framework with rich nitrogen for efficient removal of neonicotinoid insecticides in honey and fruits

Neonicotinoid insecticides (NEOs) are widely used because of their high efficiency, low dosage and long duration. However, the residues of NEOs could cause the collapse of bee population and even threaten human health. Herein, an urchin-shaped covalent organic framework with rich nitrogen (U-COF) was synthesized with 2,4,6-tri(4-aminophenyl)-1,3,5-triazine (TZT) and 2,5-divinyl-1,4-benzaldehyde (DVA) by adjusting the catalyst (acetic acid) concentration for adsorptive removal of NEOs. This U-COF with hierarchical structure showed good adsorption capacities for imidacloprid, acetamiprid and thiamethoxam at 217.2, 177.2 and 147.5 mg/g, respectively. The nitrogen-rich structure and abundant π electron system of U-COF also improved the adsorption capacity for NEOs. π-π interaction, hydrophobic interaction, and hydrogen bonding between adsorbent and target are the main reasons for the good adsorption effect. After five adsorption-desorption cycles, U-COF still shows good adsorption capacity. What is more important is that the high adsorption capacity of NEOs from honey and fruits was achieved by using U-COF, illustrating the great potential as sorbents for real samples.

Tri-modified ferric alginate gel with high regenerative properties catalysts for efficient degradation of rhodamine B

Water pollution caused by dyes has become a focal point of attention. Among them, the heterogeneous Fenton reaction has emerged as an effective solution to this problem. In this study, we designed a ferric alginate gel (PAGM) tri-modified with poly(vinyl alcohol), graphene oxide, and MoS2 as a heterogeneous Fenton catalyst for organic dye degradation. PAGM addresses the drawbacks of alginate gel, such as poor mechanical properties and gel chain dissolution, thereby significantly extending the catalyst's lifespan. The removal rate of rhodamine B by PAGM reached 95.5 % within 15 min, which was 5.9 times higher than that of unmodified ferric alginate gel. Furthermore, due to the π-π interactions, PAGM exhibits unique adsorption properties for pollutants containing benzene rings. Additionally, PAGM can be regenerated multiple times through a simple soaking procedure without any performance degradation. Finally, the reaction column constructed with PAGM maintained an 83.5 % removal rate even after 319 h of continuous wastewater treatment. This work introduces a novel concept for the study of alginate-based gel catalysts in heterogeneous Fenton reactions.

Effective remediation of leachate concentrate by peroxymonosulfate in a catalytic ceramic membrane filtration process: Performance and mechanism

Membrane concentrated landfill leachate has been characterized by complex component and degradation resistant. In this work, a new catalytic ceramic membrane (CuCM) was developed by in-situ integrating copper oxide in the membrane and used in combination with peroxymonosulfate (PMS) for leachate concentrate treatment. The performance and key factors of the CuCM/PMS system were systematically studied. Results showed that the CuCM/PMS system experienced promising efficiency in the pH range of 3 ∼ 11. The highest COD, TOC, UV254 and Color removal efficiency achieved by the CuCM-3/PMS system under the conditions of pH = 7.0 and CPMS = 10 mM, which reached up to 63.4%, 50.5%, 75.1% and 90.2%, respectively. The possible mechanism of leachate remediation was proposed and non-free radicals (Cu(Ⅲ), 1O2) played an important role in the CuCM/PMS system for leachate remediation. The fluorescence spectrum and GC-MS analysis showed that the refractory organics with a high molecular weight in the leachate concentrate were mostly oxidized into small molecules, which also alleviated the membrane fouling. In addition, the slight decrease in COD (7.4%) and TOC (9.7%) after 6 cycles revealed the good catalytic stability and reusability of CuCM-3/PMS. This work provides a feasible strategy for leachate concentrate remediation via a nonradical oxidation process.

Switching of radical and nonradical pathways through the surface defects of Fe3O4/MoOxSy in a Fenton-like reaction

Coexistence of radical and nonradical reaction pathways during advanced oxidation processes (AOPs) makes it challenging to obtain flexible regulation of high efficiency and selectivity for the requirement of diverse degradation. Herein, a series of Fe₃O₄/MoO_xS_y samples coupling peroxymonosulfate (PMS) systems enabled the switching of radical and nonradical pathways through the inclusion of defects and adjustment of Mo⁴⁺/Mo⁶⁺ ratios. The silicon cladding operation introduced defects by disrupting the original lattice of Fe₃O₄ and MoO_xS. Meanwhile, the abundance of defective electrons increased the amount of Mo⁴⁺ on the catalyst surface, promoting PMS decomposition with a maximum k value up to 1.530 min^-1 and a maximum free radical contribution of 81.33%. The Mo⁴⁺/Mo⁶⁺ ratio in the catalyst was similarly altered by different Fe contents, and Mo⁶⁺ contributed to the production of ¹O₂, allowing the whole system to attain a nonradical species-dominated (68.26%) pathway. The radical species-dominated system has a high chemical oxygen demand (COD) removal rate for actual wastewater treatment. Conversely, the nonradical species-dominated system can considerably improve the biodegradability of wastewater (biochemical oxygen demand (BOD)/COD = 0.997). The tunable hybrid reaction pathways will expand the targeted applications of AOPs.