Integrating FTIR 2D correlation analyses, regular and omics analyses studies on the interaction and algal toxicity mechanisms between graphene oxide and cadmium

Heatwave enhance the adaptability of Chlorella pyrenoidosa to zinc oxide nanoparticles: Regulation of interfacial interactions and metabolic mechanisms

Wide application of zinc oxide nanoparticles (ZnO NPs) and increasing frequency of heatwaves (HWs) have posed a great threat to freshwater ecosystems, while phytotoxicity of ZnO NPs mediated by HWs remains unclear. This study aims to link the physiological responses, bio-nano interactions, and metabolic mechanisms of Chlorella pyrenoidosa with ZnO NPs under heat stress. Results demonstrated a temperature-dependent growth inhibition against ZnO NPs, with a higher reduction of growth rate at 24 °C than 28 °C. Accompanied with lower reactive oxidative stress and cell damage at 28 °C, our results indicated that HW could enhance the adaptability of C. pyrenoidosa to ZnO NPs stress. Furthermore, HW induced the variation of algal surface properties, altered interfacial interactions in the bio-nano system, and decreased cellular Zn uptake. Metabolomics analysis supported the temperature-dependent influences of ZnO NPs on C. pyrenoidosa. The phytotoxicity of ZnO NPs was associated with the disturbance of amino acids, fatty acids, and energy metabolic processes, which were mitigated under HW condition, enhancing the responsiveness of algae to the adverse effects. These results emphasize the importance of taking the impacts of HWs into account when evaluating the environmental risks of ZnO NPs.

Spectroscopic and modeling approaches to understanding formation of microalgae-Pb-NOM ternary complex

Microalgae exhibit remarkable capacity for heavy metal (HM) accumulation, which can be enhanced by natural organic matter (NOM) in aquatic systems. This synergy often leads to deviations in HM bioaccumulation assessments. This study investigated the effects of NOM on lead (Pb) bioaccumulation by Chlorella sp., focusing on Pb concentration, functional group concentration, and stability constants of polymeric complexes. Results showed a remarkable Pb adsorption capacity of 2.438 mmol g-1 (513 mg g-1) at pH 6.5, primarily attributed to the formation of ternary complexes {alga-Pb-(NOM-Pb)}. A surface multilayer adsorption mechanism was identified, driven by the deprotonation of functional groups, with carboxyl groups preferentially adsorbing over amino groups. Notably, the ratio of algae-Pb to Pb-NOM stability constants is critical in ternary complex formation, surpassing the traditional emphasis on NOM functional groups. Advanced modeling approaches, including response surface methodology and random forest analysis, confirmed the paramount importance of stability constant ratios in predicting complex formation. These findings provide crucial implications for assessing and controlling ecological risks associated with ternary complexes in algal bloom waters, offering new perspectives on the biotransformation process of HMs. This study contributes to a more comprehensive understanding of HM-microalgae interactions and their environmental impacts.

Adsorption behavior of ZIF-67 to bisphenol compounds affects combined toxicity on Photobacterium phosphoreum

ZIF-67, as a typical MOF material, is considered a new type of high-potential adsorbent due to its ample surface area and tunable surface chemistry, which has the potential to interact with other contaminants in unforeseen ways, resulting in combined toxicity. To further elucidate this possibility, we chose typical bisphenol compound (BP) which is widely used in commercial manufacturing, to explore the combined toxicity with MOF. MOF showed a high adsorption capacity for BPAF (> 80 %) and the weakest adsorption capacity for BPA (< 10 %), and DFT confirmed the different interaction strengths of MOF for BPs. The difference in adsorption capacity for BPs resulted in different amounts of free BPs, contributing to combined toxicity. Based on flow cytometry and TEM, the results showed that membrane damage was reduced and the ability of ZIF-67 to enter the cell was decreased in the low-concentration ZIF-67 mixing group, and the ability of ZIF-67 to enter the cell was increased in the high-concentration ZIF-67 mixing group, and the membranes were severely damaged. RT-PCR and biochemical indicators measurements helped to explain the underlying toxicity mechanism. This study is of practical significance for the development of environmental guidelines for mixed contaminant effects and accurate risk assessments.

Algal extracellular polymeric substance compositions drive the binding characteristics, affinity, and phytotoxicity of graphene oxide in water

Graphene oxide (GO, a popular 2D nanomaterial) poses great potential in water treatment arousing considerable attention regarding its fate and risk in aquatic environments. Extracellular polymeric substances (EPS) exist widely in water and play critical roles in biogeochemical processes. However, the influences of complex EPS fractions on the fate and risk of GO remain unknown in water. This study integrates fluorescence excitation-emission matrix-parallel factor, two-dimensional correlation spectroscopy, and biolayer interferometry studies on the binding characteristics and affinity between EPS fractions and GO. The results revealed the preferential binding of fluorescent aromatic protein-like component, fulvic-like component, and non-fluorescent polysaccharide in soluble EPS (S-EPS) and bound EPS (B-EPS) on GO via π-π stacking and electrostatic interaction that contributed to a higher adsorption capacity of S-EPS on GO and weaker affinity than of B-EPS. Moreover, the EPS fractions drive the morphological and structural alterations, and the attenuated colloid stability of GO in water. Notably, GO-EPS induced stronger phytotoxicity (e.g., photosynthetic damage, and membrane lipid remodeling) compared to pristine GO. Metabolic and functional lipid analysis further elucidated the regulation of amino acid, carbohydrate, and lipid metabolism contributed to the persistent phytotoxicity. This work provides insights into the roles and mechanisms of EPS fractions composition in regulating the environmental fate and risk of GO in natural water.

Advances in graphene-based 2D materials for tendon, nerve, bone/cartilage regeneration and biomedicine

Two-dimensional (2D) materials, especially graphene-based materials, have important implications for tissue regeneration and biomedicine due to their large surface area, transport properties, ease of functionalization, biocompatibility, and adsorption capacity. Despite remarkable progress in the field of tissue regeneration and biomedicine, there are still problems such as unclear long-term stability, lack of in vivo experimental data, and detection accuracy. This paper reviews recent applications of graphene-based materials in tissue regeneration and biomedicine and discusses current issues and prospects for the development of graphene-based materials with respect to promoting the regeneration of tendons, neuronal cells, bone, chondrocytes, blood vessels, and skin, as well as applications in sensing, detection, anti-microbial activity, and targeted drug delivery.

The role and transcriptomic mechanism of cell wall in the mutual antagonized effects between selenium nanoparticles and cadmium in wheat

Selenium nanoparticles (SeNPs) has been reported as a beneficial role in alleviating cadmium (Cd) toxicity in plant. However, underlying molecular mechanisms about SeNPs reducing Cd accumulation and alleviating Cd toxicity in wheat are not well understood. A hydroponic culture was performed to evaluate Cd and Se accumulation, cell wall components, oxidative stress and antioxidative system, and transcriptomic response of wheat seedlings after SeNPs addition under Cd stress. Results showed that SeNPs application notably reduced Cd concentration in root and in shoot by 56.9% and 37.3%, respectively. Additionally, SeNPs prompted Cd distribution in root cell wall by 54.7%, and increased lignin, pectin and hemicellulose contents by regulating cell wall biosynthesis and metabolism-related genes. Further, SeNPs alleviated oxidative stress caused by Cd in wheat through signal transduction pathways. We also observed that Cd addition reduced Se accumulation by downregulating the expression level of aquaporin 7. These results indicated that SeNPs alleviated Cd toxicity and reduced Cd accumulation in wheat, which were associated with the synergetic regulation of cell wall biosynthesis pathway, uptake transporters, and antioxidative system via signaling pathways.

Hybrid Nanocomposites Based on Poly(3,6-dianiline-2,5-dichloro-1,4-benzoquinone): Synthesis, Structure and Properties

Hybrid nanocomposites based on poly(3,6-dianiline-2,5-dichloro-1,4-benzoquinone) (PDACB) in salt form and graphene oxide (GO) have been obtained for the first time, and the significant influence of the preparation method on the composition and structure of nanocomposites and their functional properties has been demonstrated. Nanocomposites were prepared in three ways: via ultrasonic mixing of PDACB and GO; via in situ oxidative polymerization of 3,6-dianiline-2,5-dichloro-1,4-benzoquinone (DACB) in the presence of GO; and by heating a suspension of previously prepared PDACB and GO in DMF with the removal of the solvent. The results of the study of the composition, chemical structure, morphology, thermal stability and electrical properties of nanocomposites obtained via various methods are presented. Nanocomposites obtained by mixing the components in an ultrasonic field demonstrated strong intermolecular interactions between PDACB and GO both due to the formation of hydrogen bonds and π-stacking, as well as through electrostatic interactions. Under oxidative polymerization of DACB in the presence of GO, the latter participated in the oxidative process, being partially reduced. At the same time, a PDACB polymer film was formed on the surface of the GO. Prolonged heating for 4 h at 85 °C of a suspension of PDACB and GO in DMF led to the dedoping of PDACB with the transition of the polymer to the base non-conductive form and the reduction of GO. Regardless of the preparation method, all nanocomposites showed an increase in thermal stability compared to PDACB. All nanocomposites were characterized by a hopping mechanism of conductivity. Direct current (dc) conductivity σdc values varied within two orders of magnitude depending on the preparation conditions.

Algal toxicity and food chain transport characteristics of three common bisphenols and their mixtures

Various bisphenols (BPs) have been frequently detected in the aquatic environment and coexist in the form of mixtures with potential huge risks. As we all know, food chain is a media by which BPs mixtures and their mixtures probably enter the organisms at different trophic levels due to their environmental persistence. As a result, the concentrations of BPs and their mixtures may continuously magnify to varying degrees, which can produce higher risks to different levels of organisms, and even human health. However, the related researches about mixtures are few due to the complexity of mixtures. So, the ternary BP mixtures were designed by the uniform design ray method using bisphenol A (BPA), bisphenol S (BPS) and bisphenol F (BPF) to investigate their food chain effects including bioconcentration and biomagnification. Here, Chlorella pyrenoidosa (C. pyrenoidosa) and Daphnia magna (D. magna) were selected to construct a food chain. The toxic effects of single BPs and their mixtures were also systematically investigated by the time-dependent microplate toxicity analysis (t-MTA) method. Toxicity interaction within the ternary mixture was analyzed by the concentration addition model (CA) and the deviation from the CA model (dCA). The results show that the C. pyrenoidosa and D. magna had obvious bioconcentration and biomagnification effects on BPs and their mixture. The mixture had the potential to enrich at higher nutrient levels. And BPF had the largest bioconcentration effect (BCF1 = 481.86, BCF2 = 772.02) and biomagnification effect (BMF = 1.6). Three BPs were toxic to C. pyrenoidosa by destroying algal cells and decreasing protein and chlorophyll contents, and their toxicity order was BPF > BPA > BPS. Moreover, their ternary mixture exhibits synergism with time/concentration-dependency. The obtained results are of significant reference value for objectively and accurately assessing the ecological and environmental risks of bisphenol pollutants.

Combined toxicity and adverse outcome pathways of common pesticides on Chlorella pyrenoidosa

Pesticides due to their extensive use have entered the soil and water environment through various pathways, causing great harm to the environment. Herbicides and insecticides are common pesticides with long-term biological toxicity and bioaccumulation, which can harm the human body. The concept of the adverse outcome pathway (AOP) involves systematically analyzing the response levels of chemical mixtures to health-related indicators at the molecular and cellular levels. The AOP correlates the structures of chemical pollutants, toxic molecular initiation events and adverse outcomes of biological toxicity, providing a new model for toxicity testing, prediction, and evaluation of pollutants. Therefore, typical pesticides including diquat (DIQ), cyanazine (CYA), dipterex (DIP), propoxur (PRO), and oxamyl (OXA) were selected as research objects to explore the combined toxicity of typical pesticides on Chlorella pyrenoidosa (C. pyrenoidosa) and their adverse outcome pathways (AOPs). The mixture systems of pesticides were designed by the direct equipartition ray (EquRay) method and uniform design ray (UD-Ray) method. The toxic effects of single pesticides and their mixtures were systematically investigated by the time-dependent microplate toxicity analysis (t-MTA) method. The interactions of their mixtures were analyzed by the concentration addition model (CA) and the deviation from the CA model (dCA). The toxicity data showed a good concentration-effect relationship; the toxicities of five pesticides were different and the order was CYA > DIQ > OXA > PRO > DIP. Binary, ternary and quaternary mixture systems exhibited antagonism, while quinary mixture systems exhibited an additive effect. The AOP of pesticides showed that an excessive accumulation of peroxide in green algae cells led to a decline in stress resistance, inhibition of the synthesis of chlorophyll and protein in algal cells, destruction of the cellular structure, and eventually led to algal cell death.

Inactivation of harmful cyanobacteria Microcystis aeruginosa by Cu2+ doped corn stalk biochar treated with different pyrolysis temperatures

In this study, biochars (BCs) derived from corn stalk treated at various pyrolysis temperatures (350-950 °C) were prepared and then loaded with Cu2+ to form highly efficient algaecide, i.e. Cu2+-doped BC composites (Cu-BCs). The results showed BCs pyrolyzed at higher temperatures suppressed the growth of Microcystis aeruginosa in the order of BC550 ≫ BC750 > BC950, while BC350 accelerated cell growth due to the release of inorganic nutrients. The difference could be attributed to the physicochemical characteristics, including specific surface area, adsorption capacity of nutrients and the presence of particularly persistent free radicals. Furthermore, Cu-BCs exhibited the improved inactivation performance, but the 72 h growth inhibition rates and reaction activities of Cu-BCs were still influenced by the Cu2+ loading ratio and pyrolysis temperature. These results, reported for the first time, demonstrated the algae inactivation efficiency of pristine BCs, and Cu-BCs were principally manipulated by the biochar pyrolysis temperature.

Biobran-loaded core/shell nanofibrous scaffold: a promising wound dressing candidate

This research examined the effectiveness of Biobran as a bioactive substance that could potentially improve wound healing. It also looked at how Biobran affects the properties of a nanofibrous scaffold made through coaxial electrospinning. This is the first study exploring the use of Biobran in this context and its interaction with nanofibrous scaffolds. The scaffolds were composed of poly(ε-caprolactone) (PCL) in the shell and various concentrations of Biobran blended with polyvinyl alcohol (PVA) in the core. The properties of the scaffolds were characterized by SEM, TEM, FTIR, XRD, TGA, DSC, stress-strain test, WCA, release test, MTT cytotoxicity assay, wound scratching assay, and the dye exclusion method using trypan blue. The scaffolds loaded with Biobran exhibited a more compact and smooth morphology compared with the scaffold without Biobran. The physical interaction and crystallinity of the polymers in the scaffolds were also affected by Biobran in a concentration-dependent manner. This positively influenced their tensile strength, elongation at break, thermal stability, and hydrophilicity. The porosity, water uptake capacity, and WVTR of the nanofibrous scaffolds are within the optimal ranges for wound healing. The release rate of Biobran, which revealed a biphasic release pattern, decreased with increasing Biobran concentration, resulting in controlled and sustained delivery of Biobran from the nanofiber scaffolds. The cell viability assays showed a dose-dependent effect of Biobran on WISH cells, which might be attributed to the positive effect of Biobran on the physicochemical properties of the nanofibrous scaffolds. These findings suggest that Biobran-loaded core/shell nanofiber scaffolds have a potential application in wound healing as an ideal multifunctional wound dressing.