A general way to realize the bi-directional promotion effects on the photocatalytic removal of heavy metals and organic pollutants in real water by a novel S-scheme heterojunction: Experimental investigations, QSAR and DFT calculations

Construction of hierarchical nanostructured surface on an organic hybrid selenidostannate with light trapping effect to achieve sunlight-driven environmental remediation

Due to the low intensity of sunlight, it is a great challenge to realize highly efficient sunlight-driven photocatalysis. To maximize the utilization of sunlight, increasing the light capturing ability of photocatalysts is a prerequisite to attain high catalytic performances. Due to the multiple reflections of light in the hierarchical nanostructures, constructing hierarchical nanostructured surface should boost the sunlight capturing ability of a photocatalyst. Herein we used a surface oxidation etching method to construct a hierarchical nanostructure on the surface of an organic hybrid selenidostannate [Bmim]4[Sn9Se20], namely BTSe. After 24 hours of etching by ammonium persulfate, the surface of BTSe-O24 turned into a hierarchical nanostructure. FDTD simulation proved that the hierarchical nanostructure can effectively decline the loss of incident light and enhance light capturing ability of BTSe-O24. As a result, BTSe-O24 can completely reduce Cr(VI) (100 mg/L) in 8 min with a conversion rate of 750 mg/(g h) under sunlight. The catalytic performance of BTSe-O24 under sunlight is even better than those of most reported photocatalysts under high-power xenon lamps. More importantly, BTSe-O24 can maintain high photocatalytic efficiency in the whole daytime (from 8:00 to 16:00 in autumn and winter). Our research opens a new perspective on the design of sunlight-driven photocatalysts.

Cu-based S-scheme photocatalysts

S-scheme heterojunctions have become a hot topic in photocatalysis. Copper (Cu) compounds are a versatile family of photocatalytic materials, including oxides (CuO, Cu2O), binary oxides (CuBi2O4, CuFe2O4), sulfides (CuxS, (1 ≤ x ≤ 2)), selenides (CuSe), phosphides (Cu3P), metal organic frameworks (MOFs), etc. These materials are characterized by narrow bandgaps, large absorption coefficients, and suitable band positions. To further increase the efficiency of photoinduced charge separation, Cu-based photocatalytic materials are widely integrated into S-scheme heterojunctions and exploited for the hydrogen evolution reaction (HER), CO2 reduction, H2O2 generation, N2 fixation, and pollutant degradation. This review comprehensively discusses recent progress in Cu-based S-scheme heterojunctions, and highlights their considerable potential for targeted applications in sustainable energy conversion, environmental remediation, and beyond. The fundamentals of S-scheme charge transfer, the design principles and verification tools are summarized. Then, the review describes the Cu-based photocatalytic materials, categorized according to their chemical composition, and their integration in S-scheme heterojunctions for photocatalytic applications. In particular, the implications of the S-scheme charge transfer mechanism on promoting the catalytic activity of selected systems are analyzed. Finally, current limitations and outlooks are provided to motivate future studies on developing novel and advanced Cu-based S-scheme photocatalysts with high performance and studying the underlying photocatalytic mechanisms.

Activation of peroxymonosulfate by sustainable biomass-based carbon nanotubes for controlling the spread of plant viruses in water environments

With the increasing demand for water in hydroponic systems and agricultural irrigation, viral diseases have seriously affected the yield and quality of crops. By removing plant viruses in water environments, virus transmission can be prevented and agricultural production and ecosystems can be protected. But so far, there have been few reports on the removal of plant viruses in water environments. Herein, in this study, easily recyclable biomass-based carbon nanotubes catalysts were synthesized with varying metal activities to activate peroxymonosulfate (PMS). Among them, the magnetic 0.125Fe@NCNTs-1/PMS system showed the best overall removal performance against pepper mild mottle virus, with a 5.9 log10 removal within 1 min. Notably, the key reactive species in the 0.125Fe@NCNTs-1/PMS system is 1O2, which can maintain good removal effect in real water matrices (river water and tap water). Through RNA fragment analyses and label free analysis, it was found that this system could effectively cleave virus particles, destroy viral proteins and expose their genome. The capsid protein of pepper mild mottle virus was effectively decomposed where serine may be the main attacking sites by 1O2. Long viral RNA fragments (3349 and 1642 nt) were cut into smaller fragments (∼160 nt) and caused their degradation. In summary, this study contributes to controlling the spread of plant viruses in real water environment, which will potentially help protect agricultural production and food safety, and improve the health and sustainability of ecosystems.

NH2-MIL-125(Ti)/TiO2 heterojunction with non-disturbed dual reactive centers for synchronous photocatalytic removal of Cr(VI) and organic dyes

Chromium (VI) (Cr(VI)) generally coexists with organic dyes in industrial effluents, posing a formidable challenge in water purification. Herein, NH2-MIL-125(Ti)/TiO2 Z-scheme heterojunction with intimate interfacial contact was synthesized for synchronous removal of pollutant in coexisting Cr(VI)/dyes system under simulated solar irradiation. Structural and optical investigations indicated that a well-defined interface was formed by establishing a Ti-N-C bond, facilitating the spatial separation of the photoexcited carriers of the Z-scheme heterojunction. The optimum NH2-MIL-125(Ti)/TiO2 nanocomposites show superior performance in photocatalytic removal of the pollutants in the Cr(VI) (5 mg/L, 97.2%)/MB (40 mg/L, 100%) coexistence systems within 120 min, which is comparable to that in the single system. The electron spin resonance (ESR) tests, radicals scavenging experiments, and density functional theory (DFT) cannulations unveiled that TiO2 could serve as oxidation centers to generate hydroxyl radicals (•OH) for MB oxidation, while the NH2-MIL-125(Ti) with exposed Ti nodes could act as reduction centers to effectively adsorb Cr2O72- and inject photo-generated electrons (e-) to accomplish the in-site photoreduction of Cr(VI) into Cr(III) under illumination. Particularly, owing to the spatial separation and non-disturbed dual reactive centers, the reduction and oxidation processes could be well accommodated, which could allow MB and Cr(VI) to be removed synchronously. This work demonstrated the great potential of applying duel reactive centers to eliminate multipollutant simultaneously in the actual scenarios for wastewater treatment.

Luminescent iron phthalocyanine organic polymer nanosheets with space-separated dual-active sites for the detection and photocatalytic reduction of Cr(Ⅵ) from wastewater

Cr(Ⅵ) residues in livestock and poultry wastewater are a rising concern for human health and biotic environments. For the removal of Cr(Ⅵ), its simultaneous reduction and adsorption represents a sustainable and efficient strategy. Herein, iron nodes on covalently bonded two-dimensional phthalocyanine organic polymer (PcOP-Fe) nanosheets with space-separated dual-active sites are developed for the simultaneous detection and removal of Cr(VI) from wastewater. In the FeN4 structure of PcOP-Fe nanosheets, Fe acts as an electron capture center, effectively facilitating the accumulation of photogenerated electrons and transferring them to Cr(VI), thereby achieving its photocatalytic reduction. Meanwhile, pyrrolic nitrogen provides excellent adsorption sites, enabling the adsorption of Cr(III) or Cr(0). Fe accumulates the photogenerated electrons from pyrrole N and transfer them to Cr(Ⅵ). The formation of N-Cr(Ⅲ) bonds causes a space-separation between Cr(Ⅵ) and Cr(III). In addition, PcOP-Fe can be used for a Cr(Ⅵ) detection agent. The photoluminescence intensity decreases linearly with increasing Cr(Ⅵ) concentration from 80 μM to 2 mM, with a limit of detection of 0.18 μM. The PcOP-Fe nanosheets exhibit good Cr(Ⅵ) detection and reduction performance in livestock and poultry wastewater, suggesting their suitability for practical sensing applications. Thus, the PcOP-Fe nanosheets with space-separated dual-active sites are promising for the simultaneous detection and removal of Cr(Ⅵ) in water treatment processes.

The performance and mechanism of sulfidated nano-zero-valent iron for the simultaneous stabilization of arsenic and cadmium

Co-contamination of soil and groundwater with arsenic (As) and cadmium (Cd) is widespread. Sulfidized Nanoscale Zero-Valent Iron (S-nZVI) is effective in removing As and Cd from contaminated environments. However, the mechanisms governing As and Cd removal from systems containing both species are still unclear. This study investigated the effectiveness of S-nZVI in the simultaneous removal of Cd(II) and As(III) from contaminated solutions and their interaction mechanisms. Adsorption experiments were conducted under aerobic conditions to investigate the effect of Cd(II) and As(III) on their co-immobilisation at different As(III) and Cd(II) concentrations. S-nZVI was characterised before and after the reaction to elucidate the mechanism of its simultaneous immobilisation of As(III) and Cd(II). Batch experiments revealed that the presence of Cd(II) and As(III) together considerably promotes the passivation of S-nZVI. The adsorption of Cd(II) at Cd:As = 1:3 was 198.37 mg/g, which was 27.6 % higher than that in Cd(II)-only systems, and the adsorption of As(III) at As:Cd = 1:3 was 204.05 mg/g, which was 175 % higher than that in As(III)-only systems. The results of X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy indicated that the removal of Cd(II) and As(III) by S-nZVI involves electrostatic adsorption, complexation and oxidation reactions, amongst which electrostatic adsorption and ternary-complex generation are responsible for the synergistic effect. As and Cd ions can form two types of surface complexes with FeOH or FeS on the outer layer of S-nZVI: anionic bridging to form Fe-As-Cd and cationic bridging to form Fe-Cd-As. This investigation elucidates the synergistic action of Cd(II) and As(III) during their removal using S-nZVI. Thus, S-nZVI is a promising material for the combined removal of Cd(II) and As(III), which can mitigate environmental pollution.

Enhanced photocatalytic activity of magnetically recyclable spherical Fe3O4/Cu2O S-scheme heterojunction

In this study, magnetically recyclable spherical Fe3O4/Cu2O particles comprising S-scheme heterojunctions were prepared by a simple hydrothermal approach using n-type semiconductor Fe3O4 as precursor and p-type semiconductor Cu2O. A Fenton-like system was thus constructed via the addition to Fe3O4/Cu2O of hydrogen peroxide. A rhodamine B (RhB) solution was used to simulate polluted wastewater, and photocatalytic RhB removal experiments were conducted under visible light irradiation. Powder X-ray diffractometry, vibrating-sample magnetometry, nitrogen adsorption-desorption, transmission electron microscopy, and X-ray photoelectron spectroscopy experiments were conducted to characterise Fe3O4 and Fe3O4/Cu2O composite. The band gap of Fe3O4/Cu2O was 1.76 eV, narrower than that of Fe3O4 (2.14 eV). The effects of the pH, sample dosage, hydrogen peroxide concentration, and RhB initial concentration on RhB removal were investigated. According to evidence, under the optimum reaction conditions, the RhB removal rate was 99.4%. The Fe3O4/Cu2O composite exhibited good photocatalytic efficacy even after four cycles of testing. Based on the results of free radical capture experiments, hydroxyl radicals and holes cooperated as main reactive species in the photocatalytic system. The Fe3O4/Cu2O photocatalyst can be easily removed based on magnetism, and it has been proven to be very effective for the degradation of RhB under both UV and visible light irradiation.

Deriving ecological risk thresholds for soil molybdenum in China based on interspecies correlation estimation and quantitative ion character-activity relationship models

Soil molybdenum (Mo) levels can reach ecologically hazardous levels. China has not yet established the relevant thresholds, posing challenges for environmental management. Therefore, we present our data relevant to Mo toxicity for several important species. By normalizing soil properties, we obtained a correlation model of Mo toxicity to Hordeum vulgare, as well as 31 models for the toxicity of other elements including Cu and Ni to invertebrates and microbial processes. Using interspecies correlation estimation (ICE) extrapolation, the sensitivity coefficient (0.12-0.71) for five plants were found. For invertebrates and microbial processes lacking Mo data, we used regression analysis to establish Mo toxicity models based on the soil quantitative ion character-activity relationships (s-QICAR; R2 =0.70-0.95) and known toxicities of other metal elements to invertebrate and microbial processes. Furthermore, combining species sensitivity distribution calculations, the HC5 values for protecting 95% of soil species from Mo in three typical soil scenarios in China were calculated. After correction, the predicted no-effect concentrations were 6.8, 4.8, and 3.4 mg/kg, respectively. This study innovatively combined ICE and s - QICAR to derive soil Mo thresholds. Our results can provide a basis for decision-making in the assessment and management of soil Mo pollution.

The "4 + 1" strategy fabrication of iron single-atom catalysts with selective high-valent iron-oxo species generation

Single-atom catalysts (SACs) with atomic dispersion active sites have exhibited huge potentials in peroxymonosulfate (PMS)-based Fenton-like chemistry in water purification. However, four-N coordination metal (MN4) moieties often suffer from such problems as low selectivity and narrow workable pH. How to construct SACs in a controllable strategy with optimized electronic structures is of great challenge. Herein, an innovative strategy (i.e., the "4 + 1" fabrication) was devised to precisely modulate the first-shell coordinated microenvironment of FeN4 SAC using an additional N (SA-FeN5). This leads to almost 100% selective formation of high-valent iron-oxo [Fe(IV)═O] (steady-state concentration: 2.00 × 10-8 M) in the SA-FeN5/PMS system. In-depth theoretical calculations unveil that FeN5 configuration optimizes the electron distribution of monatomic Fe sites, which thus fosters PMS adsorption and reduces the energy barrier for Fe(IV)═O generation. SA-FeN5 was then attached to polyvinylidene difluoride membrane for a continuous flow device, showing long-term abatement of the microcontaminant. This work furnishes a general strategy for effective PMS activation and selective high-valent metal-oxo species generation by high N-coordination number regulation in SACs, which would provide guidance in the rational design of superior environmental catalysts for water purification.

Activating peroxymonosulfate with Fe-doped biochar for efficient removal of tetracycline: Dual action of reactive oxygen species and electron transfer

If pharmaceutical wastewater is not managed effectively, the presence of residual antibiotics will result in significant environmental contamination. In addition, inadequate utilization of agricultural waste represents a squandering of resources. The objective of this research was to assess the efficacy of iron-doped biochar (Fe-BC) derived from peanut shells in degrading high concentrations of Tetracycline (TC) wastewater through activated peroxymonosulfate. Fe-BC demonstrated significant efficacy, achieving a removal efficiency of 87.5% for TC within 60 min without the need to adjust the initial pH (20 mg/L TC, 2 mM PMS, 0.5 g/L catalyst). The degradation mechanism of TC in this system involved a dual action, namely Reactive Oxygen Species (ROS) and electron transfer. The primary active sites were the Fe species, which facilitated the generation of SO4•-, •OH, O2•-, and 1O2. The presence of Fe species and the C=C structure in the Fe-BC catalyst support the electron transfer. Degradation pathways were elucidated through the identification of intermediate products and calculation of the Fukui index. The Toxicity Estimator Software Tool (T.E.S.T.) suggested that the intermediates exhibited lower levels of toxicity. Furthermore, the system exhibited exceptional capabilities in real water and circulation experiments, offering significant economic advantages. This investigation provides an efficient strategy for resource recycling and the treatment of high-concentration antibiotic wastewater.

Fabrication of p-n Heterostructured Photocatalysts with Triazine-Based Covalent Organic Framework and CuInS2 for High-Efficiency CO2 Reduction

The application of covalent organic frameworks (COFs) for the photocatalytic reduction of CO2 is mostly limited by severe charge recombination and low sunlight utilization. Herein, a triazine-based COF with an electron-rich and large π-conjugated system (TCOF) was employed as a building block and integrated with CuInS2 (CIS) to construct a noble-metal-free and high-efficiency photocatalyst for CO2 reduction. The in situ growth of CIS nanosheets on TCOF creates a p-n heterojunction, named CIS@TCOF. Compared with TCOF, the CIS@TCOF heterostructure exhibits a dramatically boosted photocatalytic performance in the reduction of CO2. The produced HCOOH yield over 10 wt % CIS@TCOF can be up to 171.2 μmol g-1 h-1 under visible light irradiation with good reproducibility, which is about 3 times as high as that over TCOF. Further in-depth studies indicate that the introduction of CIS not only enhances the visible light utilization but also restrains the recombination of photogenerated electron-hole pairs efficiently and facilitates the photoinduced charge transfer via the p-n heterojunction system due to the unique structural and compositional features. This research shows the great potential of COFs as efficient photocatalytic carbon fixation materials and provides a versatile route to construct semiconductor-COF heterostructures for photocatalysis.

Selective electrophilic attack towards organic micropollutants with superior Fenton-like activity by biochar-supported cobalt single-atom catalyst

The global shortage of freshwater and inadequate supply of clean water have necessitated the implementation of robust technologies for wastewater purification, and Fenton-like chemistry is a highly-promising approach. However, realizing the rapid Fenton-like chemistry for high-efficiency degradation of organic micropollutants (OMs) remains challenging. Herein, one novel system was constructed by a Co single-atom catalyst activating peroxymonosulfate (PMS), and the optimal system (SA-Co-NBC-0.2/PMS) achieved unprecedented catalytic performance towards a model OM [Iohexol (IOH)], i.e., almost 100% decay ratio in only 10 min (the observed rate constant: 0.444 min-1) with high electrophilic species 1O2 (singlet oxygen) generation. Theoretical calculations unveiled that Co-N4 sites preferred to adsorb the terminal-O of PMS (more negative adsorption energy than other O sites: -32.67 kcal/mol), promoting the oxidation of PMS to generate 1O2. Iodine (I)23 (0.1097), I24 (0.1154) and I25 (0.0898) on IOH with higher f- electrophilic values were thus identified as the main attack sites. Furthermore, 16S ribosomal RNA high-throughput sequencing and quantitative structure-activity relationship analysis illustrated the environmentally-benign property of the SA-Co-NBC-0.2 and the tapering ecological risk during IOH degradation process. Significantly, this work comprehensively checked the competence of the SA-Co-NBC-0.2/PMS system for organics abatement in practical wastewater.

Solvent-thermal approach of MIL-100(Fe)/Cygnea/Fe3O4/TiO2 nanocomposite for the treatment of lead from oil refinery wastewater (ORW) under UVA light

The main purpose of this research endeavor is to reduce lead concentrations in the wastewater of an oil refinery through the utilization of a material composed of oyster shell waste (MIL-100(Fe)/Cygnea/Fe3O4/TiO2. Initially, iron oxide nanoparticles (Fe3O4) were synthesized via solvent-thermal synthesis. It was subsequently coated layer by layer with the organic-metallic framework MIL-100 (Fe) using the core-shell method. Additionally, the solvent-thermal method was utilized to integrate TiO2 nanoparticles into the magnetic organic-metallic framework's structure. Varieties of analytical analysis were utilized to investigate the physical and chemical properties of the synthetic final photocatalyst. Nitrogen adsorption and desorption technique (BET), scanning electron microscopy (SEM), scanning electron diffraction pattern (XRD), and transmission electron microscopy (TEM). Following the characterization of the final photocatalyst, the physical and chemical properties of the nanoparticles synthesized in each step, several primary factors that significantly affect the removal efficiency in the advanced oxidation system (AOPs) were examined. These variables consist of pH, photocatalyst dosage, lead concentration, and reaction temperature. The synthetic photocatalyst showed optimal performance in the removal of lead from petroleum wastewater under the following conditions: 35 °C temperature, pH of 3, 0.04 g/l photocatalyst dosage, and 100 mg/l wastewater concentration. Additionally, the photocatalyst maintained a significant level of reusability after undergoing five cycles. The findings of the study revealed that the photocatalyst dosage and pH were the most influential factors in the effectiveness of lead removal. According to optimal conditions, lead removal reached a maximum of 96%. The results of this investigation showed that the synthetic photocatalyst, when exposed to UVA light, exhibited an extraordinary capacity for lead removal.

Boosted Photocatalytic Performance for Antibiotics Removal with Ag/PW12/TiO2 Composite: Degradation Pathways and Toxicity Assessment

Photocatalyst is the core of photocatalysis and directly determines photocatalytic performance. However, low quantum efficiency and low utilization of solar energy are important technical problems in the application of photocatalysis. In this work, a series of polyoxometalates (POMs) [H3PW12O40] (PW12)-doped titanium dioxide (TiO2) nanofibers modified with various amount of silver (Ag) nanoparticles (NPs) were prepared by utilizing electrospinning/photoreduction strategy, and were labelled as x wt% Ag/PW12/TiO2 (abbr. x% Ag/PT, x = 5, 10, and 15, respectively). The as-prepared materials were characterized with a series of techniques and exhibited remarkable catalytic activities for visible-light degradation tetracycline (TC), enrofloxacin (ENR), and methyl orange (MO). Particularly, the 10% Ag/PT catalyst with a specific surface area of 155.09 m2/g and an average aperture of 4.61 nm possessed the optimal photodegradation performance, with efficiencies reaching 78.19% for TC, 93.65% for ENR, and 99.29% for MO, which were significantly higher than those of PW12-free Ag/TiO2 and PT nanofibers. Additionally, various parameters (the pH of the solution, catalyst usage, and TC concentration) influencing the degradation process were investigated in detail. The optimal conditions are as follows: catalyst usage: 20 mg; TC: 20 mL of 20 ppm; pH = 7. Furthermore, the photodegradation intermediates and pathways were demonstrated by HPLC-MS measurement. We also investigated the toxicity of products generated during TC removal by employing quantitative structure-activity relationship (QSAR) prediction through a toxicity estimation software tool (T.E.S.T. Version 5.1.2.). The mechanism study showed that the doping of PW12 and the modification of Ag NPs on TiO2 broadened the visible-light absorption, accelerating the effective separation of photogenerated carriers, therefore resulting in an enhanced photocatalytic performance. The research provided some new thoughts for exploiting efficient and durable photocatalysts for environmental remediation.

Biological and green remediation of heavy metal contaminated water and soils: A state-of-the-art review

Contamination of the natural ecosystem by heavy metals, organic pollutants, and hazardous waste severely impacts on health and survival of humans, animals, plants, and microorganisms. Diverse chemical and physical treatments are employed in many countries, however, the acceptance of these treatments are usually poor because of taking longer time, high cost, and ineffectiveness in contaminated areas with a very high level of metal contents. Bioremediation is an eco-friendly and efficient method of reclaiming contaminated soils and waters with heavy metals through biological mechanisms using potential microorganisms and plant species. Considering the high efficacy, low cost, and abundant availability of biological materials, particularly bacteria, algae, yeasts, and fungi, either in natural or genetically engineered (GE) form, bioremediation is receiving high attention for heavy metal removal. This report comprehensively reviews and critically discusses the biological and green remediation tactics, contemporary technological advances, and their principal applications either in-situ or ex-situ for the remediation of heavy metal contamination in soil and water. A modified PRISMA review protocol is adapted to critically assess the existing research gaps in heavy metals remediation using green and biological drivers. This study pioneers a schematic illustration of the underlying mechanisms of heavy metal bioremediation. Precisely, it pinpoints the research bottleneck during its real-world application as a low-cost and sustainable technology.