In-vitro antibacterial and anti-encrustation performance of silver-polytetrafluoroethylene nanocomposite coated urinary catheters

Medical Device-Associated Biofilm Infections and Multidrug-Resistant Pathogens

Medical devices such as venous catheters (VCs) and urinary catheters (UCs) are widely used in the hospital setting. However, the implantation of these devices is often accompanied by complications. About 60 to 70% of nosocomial infections (NIs) are linked to biofilms. The main complication is the ability of microorganisms to adhere to surfaces and form biofilms which protect them and help them to persist in the host. Indeed, by crossing the skin barrier, the insertion of VC inevitably allows skin flora or accidental environmental contaminants to access the underlying tissues and cause fatal complications like bloodstream infections (BSIs). In fact, 80,000 central venous catheters-BSIs (CVC-BSIs)-mainly occur in intensive care units (ICUs) with a death rate of 12 to 25%. Similarly, catheter-associated urinary tract infections (CA-UTIs) are the most commonlyhospital-acquired infections (HAIs) worldwide.These infections represent up to 40% of NIs.In this review, we present a summary of biofilm formation steps. We provide an overview of two main and important infections in clinical settings linked to medical devices, namely the catheter-asociated bloodstream infections (CA-BSIs) and catheter-associated urinary tract infections (CA-UTIs), and highlight also the most multidrug resistant bacteria implicated in these infections. Furthermore, we draw attention toseveral useful prevention strategies, and advanced antimicrobial and antifouling approaches developed to reduce bacterial colonization on catheter surfaces and the incidence of the catheter-related infections.

Novel surface biochemical modifications of urinary catheters to prevent catheter-associated urinary tract infections

More than 70% of hospital-acquired urinary tract infections are related to urinary catheters, which are commonly used for the treatment of about 20% of hospitalized patients. Urinary catheters are used to drain the bladder if there is an obstruction in the tube that carries urine out of the bladder (urethra). During catheter-associated urinary tract infections, microorganisms rise up in the urinary tract and reach the bladder, and cause infections. Various materials are used to fabricate urinary catheters such as silicone, polyurethane, and latex. These materials allow bacteria and fungi to develop colonies on their inner and outer surfaces, leading to bacteriuria or other infections. Urinary catheters could be modified to exert antibacterial and antifungal effects. Although so many research have been conducted over the past years on the fabrication of antibacterial and antifouling catheters, an ideal catheter needs to be developed for long-term catheterization of more than a month. In this review, we are going to introduce the recent advances in fabricating antibacterial materials to prevent catheter-associated urinary tract infections, such as nanoparticles, antibiotics, chemical compounds, antimicrobial peptides, bacteriophages, and plant extracts.

Antimicrobial and Antiproliferative Coatings for Stents in Veterinary Medicine-State of the Art and Perspectives

Microbial colonization in veterinary stents poses a significant and concerning issue in veterinary medicine. Over time, these pathogens, particularly bacteria, can colonize the stent surfaces, leading to various complications. Two weeks following the stent insertion procedure, the colonization becomes observable, with the aggressiveness of bacterial growth directly correlating with the duration of stent placement. Such microbial colonization can result in infections and inflammations, compromising the stent's efficacy and, subsequently, the animal patient's overall well-being. Managing and mitigating the impact of these pathogens on veterinary stents is a crucial challenge that veterinarians and researchers are actively addressing to ensure the successful treatment and recovery of their animal patients. In addition, irritation of the tissue in the form of an inserted stent can lead to overgrowth of granulation tissue, leading to the closure of the stent lumen, as is most often the case in the trachea. Such serious complications after stent placement require improvements in the procedures used to date. In this review, antibacterial or antibiofilm strategies for several stents used in veterinary medicine have been discussed based on the current literature and the perspectives have been drawn. Various coating strategies such as coating with hydrogel, antibiotic, or other antimicrobial agents have been reviewed.

Degradable Antimicrobial Ureteral Stent Construction with Silver@graphdiyne Nanocomposite

In the surgical treatment of urinary diseases, ureteral stents are commonly used interventional medical devices. Although polymer ureteral stents with polyurethane as the main constituent are widely used in the clinic, the need for secondary surgery to remove them and their propensity to cause bacterial infections greatly limit their effectiveness. To satisfy clinical requirements, an electrospinning-based strategy to fabricate PLGA ureteral stents with silver@graphdiyne is innovated. Silver (Ag) nanoparticles are uniformly loaded on the surface of graphdiyne (GDY) flakes. It is found that the incorporation of Ag nanoparticles into GDY markedly increases their antibacterial properties. Subsequently, the synthesized and purified Ag@GDY is homogeneously blended with poly(lactic-co-glycolic acid) (PLGA) as an antimicrobial agent, and electrospinning along with high-speed collectors is used to make tubular stents. The antibacterial effect of Ag@GDY and the porous microstructure of the stents can effectively prevent bacterial biofilm formation. Furthermore, the stents gradually decrease in toughness but increase in strength during the degradation process. The cellular and subcutaneous implantation experiments demonstrate the moderate biocompatibility of the stents. In summary, considering these performance characteristics and the technical feasibility of the approach taken, this study opens new possibilities for the design and application of biodegradable ureteral stents.

Multifunctional hydrogel coatings with high antimicrobial loading efficiency and pH-responsive properties for urinary catheter applications

Catheter-associated urinary tract infections are one of the most common hospital-acquired infections. Encrustation formation results from infection of urease-producing bacteria and further complicates the situation. A typical sign of the initial onset of encrustation formation is the alkalization of the urine (pH up to 9-10). However, effective antibacterial strategies with high antimicrobial loading efficiency and pH-responsiveness of antimicrobial release are still lacking. In this study, we developed a poly(sulfobetaine methacrylate)-tannic acid (polySBMA-TA) hydrogel coating, which served as a universal, efficient, and responsive carrier for antimicrobials on urinary catheters. Common antimicrobials, including poly(vinylpyrrolidone)-iodine, copper ions, and nitrofurazone were loaded into the polySBMA-TA coating in high efficiency (several fold higher than that of the polySBMA coating), via the formation of multiple non-covalent interactions between the antimicrobials and hydrogel coating. The hydrogel coatings maintained good antibacterial properties under neutral conditions. More importantly, the pH-responsive release of antibacterial agents under alkaline conditions further enhanced the antibacterial activity of the coatings, which was advantageous for killing the urease-producing bacteria and preventing encrustation. In vitro and in vivo tests confirmed that the hydrogel coating has good biocompatibility, and could effectively inhibit bacterial colonization and encrustation formation. This study offers new opportunities for the utilization of a simple and universal antimicrobial-loaded hydrogel coating with smart pH-responsive properties to combat bacterial colonization and encrustation formation in urinary catheters.

Fibrinogen Deposition on Silicone Oil-Infused Silver-Releasing Urinary Catheters Compromises Antibiofilm and Anti-Encrustation Properties

Slippery silicone-oil-infused (SOI) surfaces have recently emerged as a promising alternative to conventional anti-infection coatings for urinary catheters to combat biofilm and encrustation formation. Benefiting from the ultralow low hysteresis and slippery behavior, the liquid-like SOI coatings have been found to effectively reduce bacterial adhesion under both static and flow conditions. However, in real clinical settings, the use of catheters may also trigger local inflammation, leading to release of host-secreted proteins, such as fibrinogen (Fgn) that deposits on the catheter surfaces, creating a niche that can be exploited by uropathogens to cause infections. In this work, we report on the fabrication of a silicone oil-infused silver-releasing catheter which exhibited superior durability and robust antibacterial activity in aqueous conditions, reducing biofilm formation of two key uropathogens Escherichia coli and Proteus mirabilis by ∼99%, when compared with commercial all-silicone catheters after 7 days while remaining noncytotoxic toward L929 mouse fibroblasts. After exposure to Fgn, the oil-infused surfaces induced conformational changes in the protein which accelerated adsorption onto the surfaces. The deposited Fgn blocked the interaction of silver with the bacteria and served as a scaffold, which promoted bacterial colonization, resulting in a compromised antibiofilm activity. Fgn binding also facilitated the migration of Proteus mirabilis over the catheter surfaces and accelerated the deposition and spread of crystalline biofilm. Our findings suggest that the use of silicone oil-infused silver-releasing urinary catheters may not be a feasible strategy to combat infections and associated complications arising from severe inflammation.

Is There Any Benefit to the Use of Antibiotics with Indwelling Catheters after Urologic Surgery in Adults

Antibiotic stewardship in urologic reconstruction is critically important, as many patients will require indwelling catheters for days to weeks following surgery and thus are at risk of both developing catheter-associated urinary tract infections (CAUTI) as well as multi-drug resistant (MDR) uropathogens. Accordingly, limiting antibiotic use, when safe, should help reduce antibiotic resistance and the prevalence of MDR organisms. However, there is significant heterogeneity in how antibiotics are prescribed to patients who need indwelling urethral catheters post-operatively. We performed a literature review to determine if there are benefits in the use of antibiotics for various clinical scenarios that require post-operative indwelling catheters for greater than 24 h. In general, for patients undergoing prostatectomy, transurethral resection of the prostate, and/or urethroplasty, antibiotic administration may be limited without increased risk of CAUTI. However, more work is needed to identify optimal antibiotic regimens for these and alternative urologic procedures, whether certain sub-populations benefit from longer courses of antibiotics, and effective non-antibiotic or non-systemic therapies.

Self-Disinfecting Urethral Catheter to Overcome Urinary Infections: From Antimicrobial Photodynamic Action to Antibacterial Biochemical Entities

Medical-device-related infections are considered a worldwide public health problem. In particular, urinary catheters are responsible for 75% of cases of hospital urinary infections (a mortality rate of 2.3%) and present a high cost for public and private health systems. Some actions have been performed and described aiming to avoid it, including clinical guidelines for catheterization procedure, antibiotic prophylaxis, and use of antimicrobial coated-urinary catheters. In this review paper, we present and discuss the functionalization of urinary catheters surfaces with antimicrobial entities (e.g., photosensitizers, antibiotics, polymers, silver salts, oxides, bacteriophage, and enzymes) highlighting the immobilization of photosensitizing molecules for antimicrobial photodynamic applications. Moreover, the characterization techniques and (photo)antimicrobial effects of the coated-urinary catheters are described and discussed. We highlight the most significant examples in the last decade (2011-2021) concerning the antimicrobial coated-urinary catheter and their potential use, limitations, and future perspectives.

Current material engineering strategies to prevent catheter encrustation in urinary tracts

Catheters and ureteric stents have played a vital role in relieving urinary obstruction in many urological conditions. With the increasing use of urinary catheters/stents, catheter/stent-related complications such as infection and encrustation are also increasing because of their design defects. Long-term use of antibiotics and frequent replacement of catheters not only increase the economic burden on patients but also bring the pain of catheter replacement. This is unfavorable for patients with long indwelling catheters or stents but inconvenient to replace. In recent years, some promising technologies and mechanisms have been used to prevent infection and encrustation, mainly drug loading coatings, functional coatings, biodegradable polymers and metallic materials for urinary devices. Obvious effects in anti-encrustation and anti-infection experiments of the above strategies in vivo or in vitro have been conducted, which is very helpful for further clinical trials. This review mainly introduces catheter/stent technology and mechanisms in the past ten years to address the potential impact of anti-encrustation coating of catheter/stent materials for the prevention of encrustation and to analyze the progress made in this field.

The Application of Silver to Decontaminate Dental Unit Waterlines-a Systematic Review

The contamination of dental unit waterlines (DUWLs) is a major health concern since it can pose cross-infection risks among dental professionals and their patients. Silver is one of the widely used metals in medical fields due to its superior antimicrobial properties. Silver-based agents have been commercially available for the decontamination of dental unit water currently. This systematic review aims to examine the evidence supporting efficacy and safety of application of silver to decontaminate DUWLs. We performed a search of the peer-review literature of studies in six electronic databases using corresponding search terms. Eligibility was restricted to English-language studies exploring the application of silver to decontaminate dental unit water, e.g., silver-based disinfectants and silver-coated dental waterlines tubing. The search identified 148 articles, and 9 articles that met the criteria were synthesized with qualitative narrative analyses. We observed good evidence of antimicrobial efficacy of silver with hydrogen peroxide on diverse microorganism present in DUWLs. Furthermore, there is insufficient evidence on the application of silver nanoparticles (AgNPs) as an efficient material to control the biofilms in DUWLs. Post-treatment data of either the bactericidal and bacteriostatic effects of silver or AgNPs, especially the actual clinical efficacy of long-term application, are scarce. More high-quality research is needed to resolve the gap on the optimal dosage and treatment options required to control bacterial and biofilm in DUWLs with silver-containing materials.

Recent Advances in Antimicrobial Coatings and Material Modification Strategies for Preventing Urinary Catheter-Associated Complications

In recent years, we have witnessed prominent improvements in urinary catheter coatings to tackle the commonly occurring catheter-associated urinary tract infection (CAUTI) in catheterized patients. CAUTIs are claimed to be one of the most frequent nosocomial infections that can lead to various complications, from catheter encrustation to severe septicaemia and pyelonephritis. Besides general prevention hygienic strategies, antimicrobial-coated urinary catheters show great potential in the prevention of urinary catheter-associated complications. The aim of this review is to present and evaluate recent updates on the development of antimicrobial urinary catheters in the context of the aetiology of urinary malfunction. Subsequently, we shed some light on future perspectives of utilizing 3D printing and the surrounding regulatory directions.

In vitro and in vivo studies on bacteria and encrustation resistance of heparin/poly-L-lysine-Cu nanoparticles coating mediated by PDA for ureteral stent application

Ureteral stents are commonly utilized as a medical device to aid the flow of urine. However, biofilm formation and encrustation complications have been clinical problems. To overcome this challenge, heparin/poly-L-lysine-copper (Hep/PLL-Cu) nanoparticle was immobilized on a dopamine-coated polyurethane surface (PU/NPs). The stability and structural properties of the nanoparticles were characterized by Zeta potential, poly dispersion index, transmission electron microscopy, atom force microscopy and contact angle. The surface composition, antibacterial potency, encrustation resistance rate and biocompatibility of PU/NPs were investigated by scanning electron microscope, X-ray photoelectron spectroscopy, antibacterial assay and MTS assay, respectively. In addition, the anti-encrustation property was studied by implanting coated NPs stents in the rat bladder for 7 days. It was shown that the size and distribution of Hep/PLL-Cu nanoparticles were uniform. PU/NPs could inhibit Proteus mirabilis proliferation and biofilm formation, and exhibit no cytotoxicity. Less encrustation (Ca and Mg salt) was deposited both in vitro and in vivo on samples, demonstrating that the NPs coating could be a potential surface modification method of ureteral material for clinical use.

Urinary Stent Development and Evaluation Models: In Vitro, Ex Vivo and In Vivo-A European Network of Multidisciplinary Research to Improve Urinary Stents (ENIUS) Initiative

Background: When trying to modify urinary stents, certain pre-clinical steps have to be followed before clinical evaluation in humans. Usually, the process starts as an in silico assessment. The urinary tract is a highly complex, dynamic and variable environment, which makes a computer simulation closely reflecting physiological conditions extremely challenging. Therefore, the pre-clinical evaluation needs to go through further steps of in vitro, ex vivo and in vivo assessments. Methods and materials: Within the European Network of Multidisciplinary Research to Improve Urinary Stents (ENIUS), the authors summarized and evaluated stent assessment models in silico, in vitro, ex vivo and in vivo. The topic and relevant sub-topics were researched in a systematic literature search in Embase, Scope, Web of Science and PubMed. Clinicaltrials.gov was consulted for ongoing trials. Articles were selected systematically according to guidelines with non-relevant, non-complete, and non-English or Spanish language articles excluded. Results: In the first part of this paper, we critically evaluate in vitro stent assessment models used over the last five decades, outlining briefly their strengths and weaknesses. In the second part, we provide a step-by-step guide on what to consider when setting up an ex vivo model for stent evaluation on the example of a biodegradable stent. Lastly, the third part lists and discusses the pros and cons of available animal models for urinary stent evaluation, this being the final step before human trials. Conclusions: We hope that this overview can provide a practical guide and a critical discussion of the experimental pre-clinical evaluation steps needed, which will help interested readers in choosing the right methodology from the start of a stent evaluation process once an in silico assessment has been completed. Only a transparent multidisciplinary approach using the correct methodology will lead to a successful clinical implementation of any new or modified stent.

An Amphiphilic Carbonaceous/Nanosilver Composite-Incorporated Urinary Catheter for Long-Term Combating Bacteria and Biofilms

Biofilms formed on urinary catheters remain a major headache in the modern healthcare system. Among the various kinds of biocide-releasing urinary catheters that have been developed to prevent biofilm formation, Ag nanoparticles (AgNPs)-coated catheters are of great promising potential. However, the deposition of AgNPs on the surface of catheters suffers from several inherent shortcomings, such as damage to the urethral mucosa, uncontrollable Ag ion kinetics, and unexpected systematic toxicity. Here, AgNPs-decorated amphiphilic carbonaceous particles (ACPs@AgNPs) with commendable dispersity in solvents of different polarities and broad-spectrum antibacterial activity are first prepared. The resulting ACPs@AgNPs exert good compatibility with silicone rubber, which enables the easy fabrication of urinary catheters using a laboratory-made mold. Therefore, ACPs@AgNPs not only endow the urinary catheter with forceful biocidal activity but also improve its mechanical properties and surface wettability. Hence, the designed urinary catheter possesses excellent capacity to resist bacterial adhesion and biofilm formation both in vitro and in an in vivo rabbit model. Specifically, a long-term antibacterial study highlights its sustainable antibacterial activity. Of note, no obvious toxicity or inflammation in rabbits was triggered by the designed urinary catheter in vivo. Overall, the hybrid urinary catheter may serve as a promising biocide-releasing urinary catheter for antibacterial and antibiofilm applications.

Usefulness of Hydrastis for the prevention of encrustation of long-term indwelling catheters in persons with neurogenic bladder dysfunction: a case series

INTRODUCTION

Virtually every person with a spinal cord injury (SCI) suffers from a neurogenic lower urinary tract dysfunction (NLUTD). In the long term, about 15% of persons with SCI depend on indwelling (suprapubic or transurethral) catheters for bladder management. About 50% of these patients suffer from catheter encrustation and blockage, which may become a vital threat for persons with SCI, as it can lead to septicemia or autonomic dysreflexia. Until today, no prophylaxis of catheter encrustations with an evidence-based proof of efficacy exists.

CASE PRESENTATION

The homeopathic remedy Hydrastis, made from the goldenseal root, is used for the treatment of thick, mucous urine sediment. In four patients with tetraplegia (three female, one male) who managed NLUTD by suprapubic catheters, recurrent encrustations and catheter blockage occurred despite irrigation and medical treatment. Surgical urinary diversion was envisioned. Applying Hydrastis C30 once weekly as a long-term medication, in three of the four patients, catheter obstructions ceased, with a follow-up for at least 1 year. One patient is awaiting ileal conduit surgery.

DISCUSSION

According to the results of our case series, the application of Hydrastis seems to be beneficial in the prevention of encrustations of indwelling catheters in patients with SCI. As the treatment was effective and well tolerated, the problem is frequent, and effective solutions are scarce, a prospective trial seems justified.

The usage of composite nanomaterials in biomedical engineering applications

Nanotechnology is still developing over the decades and it is commonly used in biomedical applications with the design of nanomaterials due to the several purposes. With the investigation of materials on the molecular level has increased the develop composite nanomaterials with exceptional properties using in different applications and industries. The application of these composite nanomaterials is widely used in the fields of textile, chemical, energy, defense industry, electronics, and biomedical engineering which is growing and developing on human health. Development of biosensors for the diagnosis of diseases, drug targeting and controlled release applications, medical implants and imaging techniques are the research topics of nanobiotechnology. In this review, overview of the development of nanotechnology and applications which is use of composite nanomaterials in biomedical engineering is provided.

In vivo catheterization study of chlorhexidine-loaded nanoparticle coated Foley urinary catheters in male New Zealand white rabbits

Foley urinary catheters were coated with chlorhexidine-loaded nanoparticles (CHX-NPs), encapsulated in the form of micelles and nanospheres. Both of nanoparticles were deposited by multilayer nanocoating through dip and spray coating on the catheter surface both inner and outer surface. In our previous studies, the nanocoating of Foley urinary catheters was studied for chlorhexidine release, degradation, antibacterial evaluation, cytotoxicity assessment, hemocompatibility, skin irritation, skin sensitization, and stability during storage. The results demonstrated the antimicrobial functions and biocompatibility of the coated catheters. In this study, coated urinary catheters were inserted in the bladders of rabbits for 7 day to investigate their efficacy. Histopathology results showed no inflammation, redness, or swelling on bladder and urethra tissues. Surface morphology comparison of uncoated catheters in the control group and coated catheters in the treatment group revealed more encrustation and crystallization on uncoated catheter than on coated catheter, indicating that catheters coated with CHX-NPs showed efficacy in delaying encrustation and bacterial colonization. These findings suggest that nanocoating of urinary catheters can potentially enhance the biocompatibility of medical devices.

Prevention of urinary infection through the incorporation of silver-ricinoleic acid-polystyrene nanoparticles on the catheter surface

Nosocominal infections associated with biofilm formation on urinary catheters cause serious complications. The aim of this study was to investigate the feasibility of the polyurethane (PU) catheter modified with tetracycline hydrochloride (TCH) attached Ag nanoparticles embedded PolyRicinoleic acid-Polystyrene Nanoparticles (PU-TCH-AgNPs-PRici-PS NPs) and the influence on antimicrobial and antibiofilm activity of urinary catheters infected by Escherichia coli and Staphylococcus aureus. For this purpose, AgNPs embedded PRici graft PS graft copolymers (AgNPs-PRici-g-PS) were synthesized via free radical polymerization and characterized by FTIR, HNMR and DSC. AgNPs-PRici-PS NPs were prepared and optimized by the different parameters and the optimized size of nanoparticle was found as about 150 ± 1 nm. The characterization of the nanoparticles and the morphological evaluation were carried out by FTIR and SEM. Short term stability of nanoparticles was realised at 4°C for 30 days. In vitro release profiles of TCH and Ag NPs were also investigated. The formation of biofilm on PU modified TCH-Ag NPs-PRici-PS NPs, was evaluated and the biocompatibility test of the nanoparticles was realized via the mouse fibroblast (L929) and mouse urinary bladder cells (G/G An1). This is the first time that TCH-AgNPs-PRici-PS NPs used in the modification of PU catheter demonstrated high antimicrobial and antibiofilm activities against the urinary tract infection.

In Situ Deposition of Green Silver Nanoparticles on Urinary Catheters under Photo-Irradiation for Antibacterial Properties

Urinary tract infections, especially catheter-associated urinary tract infections (CAUTIs), are the most common type of nosocomial infections. Patients with chronic indwelling urinary catheters have a higher risk of infection due to biofilm formation on the urinary catheter surface. Therefore, in this work, a novel, cost-effective antimicrobial urinary catheter was developed using green technology. Silver nanoparticles (AgNPs) synthesized from Mon Thong durian rind waste were used as an antimicrobial agent for the prevention of infection. Flavonoids, phenolic compounds, and glucose extracted from durian rind were used as a reducing agent to reduce the Ag+ dissolved in AgNO3 solution to form non-aggregated AgNPs under light irradiation. The AgNPs were simultaneously synthesized and coated on the inner and outer surfaces of silicone indwelling urinary catheters using the dip coating method. The results showed that the antimicrobial urinary catheter fabricated using a 0.3 mM AgNO3 concentration and 48 h coating time gave the highest antibacterial activity. The as-prepared spherical AgNPs with an average diameter of 9.1 ± 0.4 nm formed on catheter surfaces in a monolayer approximately 1.3 µm thick corresponding to a 0.712 mg/cm2 silver content. The AgNP layer was found to damage and almost completely inhibit the growth of Escherichia coli cells with antibacterial activity by 91%, equivalent to the commercial, high-price antimicrobial urinary catheter. The cumulative amount of silver released from the coated catheter through artificial urine over 10 days was about 0.040 µg/mL, which is less than the silver content that causes tissue and organ toxicity at 44 µg/mL. Thus, we concluded that the developed antimicrobial urinary catheter was useful in reducing the risk of infectious complications in patients with indwelling catheters.

Co-effects of C/Ag dual ion implantation on enhancing antibacterial ability and biocompatibility of silicone rubber

Although silicone implants are the most popular choice around the world for breast augmentation, reconstruction, and revision, due to the poor antibacterial properties and limited biocompatibility of silicone rubber (SR), one of the major complications, capsule contracture, is a lingering problem. To overcome the two main shortcomings, a dual ion implantation technique was applied to modify the surface of SR with the basic skeleton element of organic matter, carbon (C) and the broad-spectrum bactericide, silver (Ag). We present surface characterization, toxicological effects, and evaluation of the mechanical, antibacterial and biocompatible properties of C and Ag co-implanted SR (C/Ag-SRs). After ion implantation, surface roughness and tensile strength of these new materials increased. Biotoxicity was fully assessed by in vitro experiments on human fibroblasts and in vivo experiments on rats, showing that the low-Ag groups met safety standards. Both the anti-bacterial adhesion and bactericidal abilities of C/Ag-SRs were superior to those of SR, which had few antibacterial activities, especially against Staphylococcus epidermidis. With respect to biocompatibility, the adhesion of fibroblasts was promoted, while their proliferation was moderately inhibited on ion-implanted surfaces. After subcutaneous implantation in rats for 7, 30, 90 and 180 d, the capsular thickness around C/Ag-SRs was significantly lower than that around the SR. Additionally, there was no difference in the inflammatory reaction after 7 d of retention in vivo between C/Ag-SRs and SR. The results demonstrate that C/Ag-SRs are desirable shell materials for breast implants.

Surface-Treated Pellethanes: Comparative Quantification of Encrustation in Artificial Urine Solution

Introduction: Encrustation of implanted urinary tract devices is associated with significant morbidity. Pellethane^® is a polyether-based compound noted for its strength, porosity, and resistance to solvents. We assessed Pellethane thermoplastic polyurethane (TPU) with and without surface coatings 2-hydroxyethyl methacrylate (HEMA) and tetraethylene glycol dimethyl ether (TETRA) for the potential to resist encrustation in an artificial urine environment. Materials and Methods: Samples of Pellethane TPU, HEMA Pellethane TPU, TETRA Pellethane TPU, and hydrogel-coated ureteral stent (Cook^®) were suspended in a batch-flow model with an artificial urine solution (AUS). Every 48 hours for 90 days, 40% of the solution was replaced with fresh AUS. All samples were stored in a 37°C incubator. Subsequently, the samples were thoroughly dried for 48 hours before weighing. Scanning electron microscopy was used to assess the degree of encrustation. Nu-Attom Inductively Coupled Plasma Mass Spectrometry (ICP-MS) was used to determine the precise compositions of the encrustation specifically with regard to calcium, magnesium, and phosphate. Results: At the conclusion of the 90-day trial, the samples were analyzed, and the average mass changes were as follows: stent 63.78%, uncoated Pellethane TPU 11.50%, HEMA-coated Pellethane TPU 2.90%, and TETRA-coated Pellethane TPU 0.60%. Pellethane TPU products, and specifically those coated with HEMA and TETRA, exhibited less average mass increase and a lesser propensity to form encrustation than the traditional urinary tract stent. The mass increases noted on coated Pellethane devices were primarily ionic, whereas that of the stent was not. Conclusion: Pellethane, particularly with an HEMA-based preventative coating, may serve as a favorable alternative to traditional urinary stent material, providing its improved resistance to encrustation.

Multipronged Approach to Combat Catheter-Associated Infections and Thrombosis by Combining Nitric Oxide and a Polyzwitterion: a 7 Day In Vivo Study in a Rabbit Model

The development of nonfouling and antimicrobial materials has shown great promise for reducing thrombosis and infection associated with medical devices with aims of improving device safety and decreasing the frequency of antibiotic administration. Here, the design of an antimicrobial, anti-inflammatory, and antithrombotic vascular catheter is assessed in vivo over 7 d in a rabbit model. Antimicrobial and antithrombotic activity is achieved through the integration of a nitric oxide donor, while the nonfouling surface is achieved using a covalently bound phosphorylcholine-based polyzwitterionic copolymer topcoat. The effect of sterilization on the nonfouling nature and nitric oxide release is presented. The catheters reduced viability of Staphylococcus aureus in long-term studies (7 d in a CDC bioreactor) and inflammation in the 7 d rabbit model. Overall, this approach provides a robust method for decreasing thrombosis, inflammation, and infections associated with vascular catheters.

Urinary Catheter Coating Modifications: The Race against Catheter-Associated Infections

Urinary catheters are common medical devices, whose main function is to drain the bladder. Although they improve patients’ quality of life, catheter placement predisposes the patient to develop a catheter-associated urinary tract infection (CAUTI). The catheter is used by pathogens as a platform for colonization and biofilm formation, leading to bacteriuria and increasing the risk of developing secondary bloodstream infections. In an effort to prevent microbial colonization, several catheter modifications have been made ranging from introduction of antimicrobial compounds to antifouling coatings. In this review, we discuss the effectiveness of different coatings in preventing catheter colonization in vitro and in vivo, the challenges in fighting CAUTIs, and novel approaches targeting host–catheter–microbe interactions.